Used Quick-Change Holder for sale (21,878)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/90/H75 mm Prjdpfx Asy R Spxjhcoa -Total weight: 4.4 kg

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber for professional heat and cold tests in industry, research, development, and quality assurance. The Binder MK series temperature test chambers are particularly suitable for cyclic temperature tests and reproducible tests under defined environmental conditions. The test chamber enables temperature tests in the range of -40 °C to +180 °C and represents an efficient alternative to individual custom solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Pjdpjy Nic Hefx Ahcera Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x feedthrough Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Optical condition according to pictures Normal storage and signs of wear present Important note: All information has been compiled to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm Predpfx Ahoh Axk Iscsa 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2026, We produce all type of products that are made from stainless steel . Mixing Tanks Storage Tanks Pasteurizers Cheese Vats Heat Exchangers Capacity range 50-2500 liters . Pedpfx Aehciakjhcsra Send an inquiry with a specification so we can make an offer .

Year of construction: 2005, condition: good (used), 7-position tool holder for CNC lathes Manufacturer: TRAUB, Model TNA 480, tool holder size VDI 40. Also compatible with SAUTER tool turrets with VDI 40 mounting. Pjdpfjhwnfkox Ahcera 7-position horizontal tool holder, positions no. 3/4/5/6/7/8/9 for drilling and milling, price per piece: 550,- € 2-position horizontal tool holder, positions no. 1 and 2 for tapping, price per piece: 600,- € 1 NC drilling chuck VDI 40, clamping range 1-13 mm, price: 100,- € 1 NC drilling chuck VDI 40, clamping range 2.5-16 mm, price: 150,- €

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 25 mm -Dimensions: see photo technical drawing -Overall dimensions: 105/75/H65 mm Pjdpfxoy Thmfj Ahcjra -Total weight: 2.5 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/67/H55 mm -Total weight: 1.9 kg Prjdpfx Ahoy Tin Rocea

Condition: used, Year of construction: 2011, Perfect binder Wohlenberg Quickbinder Year: 2011 The Quickbinder from Wohlenberg is intended not only for expanding smaller-sized companies making the jump to quality book binding applications, but also for large, industrial-scale book binding companies who can utilize the machine for the production of superior, high-quality samples and editions. Description: - Motorised setting - Colour monitor with touch screen: Navigator - Solo perfect binder - Hand feeding - Number of clamps: 5 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - Hotmelt side glue unit - Rotary cover feeder - Nipping and pressing station - Belt delivery Optional available: Wohlenberg lay down delivery for connection to a conveyor system / three knife trimmer Description modified on Max. mechanical speed: up to 2.000 cycles/h Maximum size range (wxhxt): 430 x 320 x 70 mm Pjdpfjzl Edpsx Ahcera Minimum size range (wxhxt): 110 x 105 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Equipment: soot filter, - Particle filter Prodpfx Ajzl Nyzjhcsa - Air conditioning - 3 buckets - Oilquick quick-coupler system - 11,850 operating hours

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, 7 sets -Jaw width: 25 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 80/75/H55 mm Predpfx Aszmgf Dohcsa -Weight/set: 2.2 kg

Condition: used, Year of construction: 2012, functionality: fully functional, Weiler Primus VC Precision Lathe, manufactured in 2012. 3-axis digital display from Siemens with AC drive and stepless speed control. CE certified. Technical specifications: >> Year of manufacture: 2012, Machine No. HB 01 >> Center height: 140 mm >> Distance between centers: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display from Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck, 160 mm, with 7 sets of jaws >> Stop >> Mulifix, size A, with 4 steel holders >> Electric chip guard >> Machine lamp >> Spindle stop, drill chuck, center >> Change gears Prodpfx Aszl T Hxohcja >> Splash guard About the machine: Offered for sale is a Weiler Primus VC lead screw and draw spindle lathe, manufactured in 2012, in very good condition. The control system, in combination with a precision lathe from Weiler, performs the following functions: graphical display of travel paths and travel direction, graphical representation of the coordinate system on the lathe, compensation of tool corrections, zero point shift to compensate for workpiece position, radius/diameter switching, graphical display of the main spindle direction of rotation, and graphical display of the position of the machine's speed potentiometer. This is a very nice lathe with AC drive and stepless speed control of the spindle. All slides move very easily and smoothly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that are as smooth as ground surfaces. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: used, Tool holder, milling holder, milling tool, adapter, Weldon Prsdpfx Ahjuhr R Hecea -Milling holder: test mandrel -Type: MK4 / Ø 30 mm W8802 C15 -Dimensions: Ø 31 x 300 mm -Weight: 1.6 kg

Condition: good (used), Centrifugal quick-release chuck, centrifugal chuck, three-jaw chuck Prsdpfx Aheb A Rdtocsa -Outer diameter: 155 mm -Clamping range: Ø 12-30 mm -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

Condition: used, Year of construction: 1996, Weiler Guide and Pull Spindle Lathe Type/Model: Condor AC Podpfezfgupjx Ahcera Condition: Used Year of Manufacture: 1996 Technical Data: Center height: 165 mm Distance between centers: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm Spindle bore: Ø 40 mm Spindle speed, stepless: 22 - 2,800 rpm Spindle head: DIN 55027 Size 5 (short taper) Drive power: 5.5 kW Tailstock and feeds: Tailstock internal taper: MK 3 Quill stroke: 110 mm Feed range automatic longitudinal and cross feeds: approx. 0.016 - 0.50 mm/rev Thread cutting range suitable for metric threads and inch threads: approx. 0.20 - 28 mm Dimensions (L/W/H): approx. 2000 mm x 860 mm x 1600 mm Weight approx.: 1,100 kg Equipment: - Quick-change tool holder system Multifix, 1 insert size A - Bed stop - Coolant system - Chuck guard with limit switch - Collet chuck system, limit switch secured Costs for delivery by freight forwarder, free to curb, see shopping cart or in individual offers for request items.

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1250 VARIO Universal Lathe The CORMAK TORNADO 360×1250 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing facilities, toolrooms, and maintenance workshops. Its robust construction, 1,250 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting provide outstanding rigidity, stability, and repeatable machining accuracy, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1250 VARIO Universal Lathe 1,250 mm distance between centers allows machining of workpieces up to 1,000 mm between the chuck and tailstock center, making it suitable for long shafts and cylindrical components. Hardened and precision-ground 205 mm bed offers excellent wear resistance while effectively minimizing vibration. 52 mm spindle bore enables machining of larger-diameter stock without additional preparation. Camlock D1-5 spindle nose provides quick, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and maintains reliable performance under load. Variable spindle speed (VARIO) from 70–2,000 RPM allows precise adjustment to suit different materials and machining operations. Supports both metric and imperial thread cutting, making the machine highly versatile. Compatible with 16 × 16 mm cutting tools, allowing the use of professional turning tool holders. Rigid Construction for Superior Machining Accuracy The lathe features a heavy-duty cast iron frame designed to minimize vibration during machining. Its substantial weight and wide guideways provide excellent rigidity, while the hardened and precision-ground bed maintains its geometry even under intensive industrial use, ensuring consistently accurate machining and high-quality surface finishes. The spindle is supported by precision bearings and equipped with a Camlock D1-5 spindle nose for rapid chuck changes and maximum rigidity. The 52 mm spindle bore allows larger-diameter materials to pass through the spindle, expanding the machine's machining capabilities. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Psdjznt Rpopfx Ahcjra Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis digital readout (DRO) Chip tray and tool drawer Coolant system LED work light Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 220 mm Distance between centers 1,250 mm Bed width 205 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 70–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 46 mm Tailstock taper MT4 Tailstock quill travel 100 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,930 × 850 × 1,600 mm Weight 600 kg

Condition: used, functionality: fully functional, type of input current: three-phase, spindle diameter: 30 mm, table width: 1,070 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 3,000 rpm, – very good condition – manufactured in Poland – DTR (Technical Documentation) – interchangeable spindle TECHNICAL PARAMETERS: – spindle diameter: 30 mm – working spindle height: 120 mm – spindle height adjustment – maximum tool diameter: 400 mm – four spindle speed settings: 3000 / 4500 / 6000 / 9000 rpm – spindle rotation: right / left – table dimensions: 1020 x 1000 mm Pedpfx Ahsw Ip Dmocsra – auxiliary table dimensions (L/W): 500 x 445 mm – extendable table support to 570 mm – table height from floor: 890 mm – motor power: 5.5 kW – nozzle diameter: 2 x 120 mm – overall dimensions (L/W/H): 202 / 120 / 130 cm – weight: ~500 kg

Condition: ready for operation (used), Year of construction: 2020, operating hours: 200 h, overall weight: 5,500 kg, load capacity: 20 kg, arm reach: 1,650 mm, controller manufacturer: SIEMENS, controller model: S7-300 / S7-1500 PLC, total width: 2,900 mm, total height: 2,600 mm, product length (max.): 4,800 mm, number of axes: 6, This Ultrasonic Welding System was manufactured in 2020. It features a Siemens control unit and includes two ABB IRB 2600 robots, each with a payload capacity of 20 kg. The machine has a cycle time of 262 seconds. If you are looking to get high-quality ultrasonic welding capabilities, consider the AUDI TSV D5 TÜR robot arm we have for sale. Contact us for further details. CHANGO Machine • Ultrasonic Welding System • Control Unit Brand: Siemens • Control Unit Model: S7-300 / S7-1500 PLC • Number of Robots: 2 Pedpfxszpxnco Ahcsra • Loading / Unloading Height: 900 mm • Cycle Time: 262 s (without loading/unloading) • Requested Cycle Time: 350 s • Turntable Rotation: 180° • Number of Welding Points: 85 • Surface Welding Points: 10 • Pin Staking Points: 71 • Rib Staking Points: 4 • Sonotrodes per Robot: 3 • Sonotrode Change Time: 10 s • Welding Time per Point: 5 s • Ultrasonic Generator Brand: Herrmann • Generator Power: 1 kW • Ultrasonic Frequency: 35 kHz • Converter Frequency: 35 kHz Including Robots • Manufacturer: ABB • Model: IRB 2600-20/1.65 • Quantity: 2 • Payload Capacity: 20 kg • Number of Axes: 6 (per robot) • Max. Reach: 1650 mm • Robot Weight: 272 kg • Controller for robots: ABB Robot Controller Additional Equipment • Rotary Indexing Table • 2 Fixtures (PU + Brass Inserts) • Herrmann Ultrasonic Generators (2x) • Herrmann Converters (6x) • Internal Sonotrode Cooling • Quick Tool Changer • Pneumatic Components (Festo) • Linear Guides (ABBA / HIWIN) • Omron / Schneider Electrical Components • Electrical Control Cabinet • Siemens TP1200 Touch Panel • Exhaust System • Electric Roller Shutter • Safety Light Barrier (SICK / Leuze) • Pilz Safety Switch • Air Cylinders • Displacement Sensors • Pressure Gauge • Maintenance Door • Machine Frame • Adjustable Foot Pads

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, progressive pump, central lubrication pump -Handover: in its current condition as inspected -Device condition: not functioning, control board missing -Manufacturer: Lincoln, Quicklub central lubrication pump -Type: 645-41110-1 -Voltage: 100-240 V -Power: 60 watts -P max: 240 bar -Dimensions: 270/240/H570 mm -Weight: 15.5 kg Pedehv Ilwjpfx Ahcjra

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Prodezp Nknspfx Ahcea Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 Predpfx Aoif Az Uohcea 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2010, The machine is powered and can be inspected. Max. machining diameter: 280 mm Max. machining length: 409 mm Bar capacity (main spindle): 52 mm Main spindle: Chuck size: 6 inches Max. speed: 6,000 rpm Motor power: 15 kW (40% duty cycle), 11 kW (continuous operation) Max. torque: 184 Nm Counter spindle: Chuck size: 5 inches Max. speed: 6,000 rpm Motor power: 11 kW (25% duty cycle), 7.5 kW (continuous operation) Max. torque: 90 Nm Tool turret: Number of stations: 12 Max. speed of driven tools: 5,000 rpm Motor power (milling spindle): 5.5 kW (40% duty cycle), 3.7 kW (Continuous operation) Max. torque (milling spindle): 47 Nm Pjdjwk Hwqopfx Ahcora Travel ranges: X-axis: 187 mm Y-axis: 100 mm Z-axis: 510 mm W-axis (counter spindle): 460 mm Rapid traverse speeds: X/Z-axis: 33 m/min Y-axis: 21 m/min W-axis: 30 m/min CNC control: MAZATROL SmoothG Machine weight: approx. 3,600–4,720 kg (depending on model) Dimensions (L × W × H): approx. 2,400 × 1,800 × 2,000 mm Special features Multi-tasking capability: Turning, milling, Y-axis, and counter spindle enable complex machining operations in one Clamping. Integrated motor spindles: Both the main and counter spindles feature integrated motors that minimize vibration and ensure high machining accuracy. Y-axis machining: Enables the machining of complex workpieces with high precision.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: Pjdpfx Aezrnkrshcora 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1200 Electric Tapping Machine The CORMAK RGE36PWx1200 electric tapping machine is an advanced tool designed for efficient and precise thread cutting in industrial environments. It is ideal for both large production facilities and smaller workshops. Thanks to its innovative design and modern technologies, this tapping machine provides exceptional reliability, high operating speed, and minimizes the risk of errors and inaccuracies during the threading process. Main advantages of the CORMAK RGE36PWx1200 Electric Tapping Machine High-precision tapping: Thanks to the use of a servo drive and a tapping arm, the machine ensures excellent accuracy and repeatability when cutting threads in various materials. High efficiency: The tapping arm enables fast and effective thread cutting, significantly reducing operation time compared with traditional manual tapping methods. Modern control panel: The touchscreen control panel allows easy adjustment of parameters such as spindle speed, tapping depth, and thread direction. The interface is available in two languages: Polish and English. Tool cooling system: The standard micro-spray lubrication system effectively cools the tap, reduces lubricant consumption, and extends tool life. Improved working efficiency: The chip blow-off system effectively removes chips, improving visibility of the workpiece and increasing operator comfort. Universal application: With a wide tapping range from M6 to M36, the machine is an ideal solution for various industrial applications. Design and technology of the CORMAK RGE36PWx1200 tapping machine The CORMAK RGE36PWx1200 was designed for intensive operation in demanding industrial conditions. Its construction provides high resistance to wear and ensures long service life. The servo-driven tapping mechanism operates smoothly and reliably, while the tapping arm allows precise tool positioning. The rotating motor assembly enables thread cutting at different angles, increasing the versatility of the machine. Key construction features of the CORMAK RGE36PWx1200 include: Tapping arm with quick-change tool holder, allowing fast and secure installation of taps. Adjustable overload clutches, providing protection against excessive loads and preventing tool damage. Robust machine construction with a micro-spray lubrication system ensuring effective tool cooling. Standard equipment of the CORMAK RGE36PWx1200 tapping machine Touchscreen control panel: Enables easy programming of tapping parameters such as speed, direction of rotation, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical specifications of the CORMAK RGE36PWx1200 tapping machine Parameter Value Power 2 kW Power supply 230 V Prodpjycdcgefx Ahcsa Weight 56 kg Maximum arm reach 1200 mm Maximum spindle speed 125 rpm Included in the set: Tap holders covering the range from M5 to M36. The machine is supplied without a workbench, vice, and taps.

Condition: new, Thermo Scientific 10PK, 2L LABTAINER W/QUICK CONNECTS, CX5-14 SH30712.05 Predpsvwctcofx Ahcja exp. 2026.04.30 1 box 10 pcs, brand new never used.

Condition: used, Year of construction: 2002, Additional title: Wort cooling Prsdpfx Ahjztywtscsa