Used Powerking Rock Splitter for sale (643)

Condition: used, Year of construction: 2003, Technical details: volume capacity: 1,00 m³/min Electric capacity: 0,17 kw electrics - voltage/frequency: 220-230/50 V/Hz protection class: IP20 air pressure: min/max:15/45 bar weight: 38 kg dimensions L x W x H: 600x450x550 mm nominal power of the dryer: - pressure connections 3/8" - refrigerants R 134a - removal of condensate G - PED 97/23/EC - TSL 2°C Lodpfxsu Nzw Ij Aftehi - TSH 60°C The mentioned details are relating to a operation pressure of 40 bar, of a aior pressure entrance temparature of 25 °C, such as an ambient temparature of 25°C CE statement available. Copy of documentation available. *

Year of construction: 1981, condition: used, Technical details: height over floor: 850 mm total power requirement: 2,5 kw Lodpfx Afju N Agkotshi temperature: 200 °C voltage: 220/50 V / Hz weight of the machine approx.: 80 kg space requirement of the machine approx.: L:0,85xB:0,6xH:1,15 m Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, because the thermometer gets deep into the room ( see picture / comparable) Oven has been tested up to 160°, with limitation on sale, 2 heating rods up are OK and 2 heating rods down are not working! *

Year of construction: 2002, condition: good (used), Kaut absorption dryer CR 600 Manufacturer: KAUT GmbH Type: Dryer CR600 Year of construction: 2002 Lsdpfx Afstib R Ietshi Dry air volume, nominal: 600 cbm / h Dry air volume, blowing freely: 750 cbm / h Regeneration air volume: 170 cbm / h Voltage: 400V / 3N + PE / 50Hz Power consumption: 5.9 kW Párátlanítási teljesítmény 10°C/70% relative páratartalom mellett: 3.8 kg/h Párátlanítási teljesítmény 20°C-on / 60% relative páratartalom: 4.4 kg/h Párátlanítási teljesítmény 20°C/80% relative páratartalom mellett: 5.2 kg/h Available external pressure, dry air side: 220 Pa Available external pressure, regeneration air side: 150 Pa Installation and dimensions Process air inlet (W x H): 380mm x 257mm Regeneration air inlet (W x H): 166mm x 179mm Dimensions (H x W x D): 735mm x 1125mm x 600mm Weight: 110kg

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Ljdpfx Aezb Idfsftshi Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: used, Hebrock K34 Edge thickness up to 8 mm PLC screen control with 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Lhsdpfx Afowtfvkotei Gluing station with interchangeable container and glue dispensing device Edge height max. 60 mm Trimming unit Milling unit for flush trimming/radius/chamfer milling Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW condition and in TOP condition From a carpentry business closure/retirement Available from carpentry

Condition: excellent (used), Hebrock F5 Edge Bander Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Glue application with a roller, Has a glue release mechanism, The glue pot is replaceable. A second glue pot is included. Pneumatic pre-trimming guillotine, Pressure rollers, Final trimming saw, Liquids Top and bottom milling unit, R1 – R2 Profiling cylinder Corner rounding unit Lodpfx Asza Uq Asftshi Flat cylinder, Polishing unit Pneumatic 3-point adjustment Max. veneer thickness in roll: 3mm, Power consumption: 7.8 KW, Max. part thickness: 50mm Used machine, very good condition Mileage: 62,000 meters

Condition: excellent (used), EXCELLENT CONDITION Hebrock edge banding machine Model: Top 2000 Ljdpfx Aezadx Ajftohi Machine description Features - Heating strip for chipboard - Glue container - Pressure roller - Front and rear saws - Top and bottom milling station, radius and straight milling - Machine length: 3100 mm - Weight: 600 kg

Condition: like new (used), Hebrock F4 edger well-equipped, can be inspected before purchase, Lhedjy Dcmujpfx Aftoi PRE-MILLING cutters, glue application with a roller, has a glue dispensing system, the glue tank is replaceable pneumatic pre-trimming guillotine, pressure rollers, final trimming saw, milling unit, top and bottom, R1 – R2 Profile edging R1-R2 corner rounding unit, replaceable for 1mm and 2mm flat edging, nesting 3-point pneumatic adjustment LED lighting max. veneer thickness in roll 3mm, feed rate 7 and 10 m/min, power consumption 7.08 kW, the list price of a new machine with this equipment is over 51,000 EUR Machine from 2026, showroom model, operating time 18 hours.

Condition: used, Year of construction: 2012, total height: 1,600 mm, total length: 5,250 mm, total width: 1,440 mm, Edgebander HEBROCK AKV 3006 DK FS maximum edge thickness 3/8 mm min/max. workpiece thickness 10/40 mm min. workpiece length approximately 200 mm min. workpiece width approx. 80 mm feed speed about 10 m/Min. ready in about 6 minutes. maximum power consumption 12 kW electrical connection 400 V / 3 Ph / 50 Hz Pre-mill Glue unit Pressure roller Chopping saw Milling unit Milling unit Corner rounder Radius scraper Flat scraper Cleaning unit Dimensions (length x width x height) 5250x1445x1600 mm, weight 1550kg - Year: 2012 - Documentation available: No - CE certificate present: No - Transport dimensions: 5250mm x 1445mm x 1600mm (l x w x h) Lhsdswnhb Sopfx Aftji Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, Hebrock - Altendorf Edge Bander F5 next - Brand new machine, still in original packaging with complete equipment - With PLC control including 15" touchscreen - Edge material up to 3 mm - Whispercut jointing head including DIA tool up to 2 mm - Coated maintenance-free glue pot, PUR interchangeable tank - Includes glue drain device downwards Ljdoy Iw Nrspfx Aftshi - HF milling station with pneumatic milling adjustment - Corner rounding unit - Radius scraper - Surface scraper including pneumatic lift device - Buffing station - Combination milling head - Radius milling head R = 2 mm - Radius corner milling unit R = 2 mm - Quick-change system for corner milling unit - Additional changeover motor for corner milling unit with tooling - Radius changeover motor R = 1 mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 - Underframe - Additional interchangeable glue pot including stand - Spray system for release agent PUR - Spray system for cleaning agent PUR - Spray system for edge PUR/foil - Nesting for milling head and radius scraper - Pneumatic 3-point adjustment (radius, chamfer, flush trimming) - Jointing up to 50 mm workpiece thickness - LED lighting inside - Workpiece thickness 8–50 mm - Min. workpiece length approx. 160 mm - Feed speed approx. 10 m/min - Dimensions (LxWxH): 4.40 x 1.10 x 1.55 m - Weight: gross: 990 kg; net: 930 kg - Extraction nozzle 1 x 140 mm Delivery and commissioning possible.

Condition: good (used), Hebrock top 2000 edge bander glue application by roller pneumatic pre-cut guillotine pressure rollers trimming saw for finishing top and bottom milling unit R1-R2 Lhedpfx Aey Rpiceftei max. workpiece height: 50 mm max. edge thickness in roll: 3 mm feed speed: 10 m/min machine length: 310 cm The machine is well-maintained and in good condition.

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess Lsdsq H Spvjpfx Aftjhi edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Lhjdou Racxspfx Aftsi Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Lsdpfx Aeq Ihxpeftshi Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Lhsdevx D Aujpfx Aftoi Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius milling machine HFF08.

Condition: good (used), Year of construction: 2003, I sell the radius milling machine HEBROCK HFF08, Year 2003. Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius edge banding machine AKV88D. Ledpfx Aswun H Ujftjhi

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 3214, functionality: fully functional, workpiece height (max.): 40 mm, feed rate X-axis: 10 m/min, total height: 1,600 mm, total length: 3,700 mm, total width: 1,445 mm, overall weight: 1,080 kg, TECHNICAL DETAILS Feed speed: 10 m/min Panel thickness: 8 - 40 mm Max. edge thickness: 3 mm MACHINE DETAILS Operating length: approx. 100,000 m Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,445 x 1,600 mm Weight: 1,080 kg Lodpfx Afoy Hih Rjtshi EQUIPMENT/FEATURES PLC control including touchscreen Power stop/trimming knife Jointing unit with DIA milling tools Application of hot melt adhesive to workpiece Robust chain drive Upper operator panel, rapid adjustment from operator side Double roller pressure Signal lamp for workpiece feed Quick-heating glue pot, maintenance-free Pneumatic end trimming for edge thicknesses up to 3 mm High-frequency crosscut saw High-frequency milling unit with replaceable cutter heads For radius, straight and chamfer milling Workpiece air blower Integrated collection container for edge material offcuts Extendable support arm on the front side Note: The machine can still be inspected under power until the middle of calendar week 19.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. an exhaust air flap. The vacuum pump is used for rapid dehumidification. Lsdetqlp Repfx Aftohi

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Lhedpetqlqaefx Aftei

Condition: used, UV dryer Lhedpfev Sauaex Aftsi Comes from ongoing production

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Rockster R700S Impact Crusher – 2012 – Magnet – Ready to Work Brand / Model: Rockster R700S Year: 2012 Serial Number: 70106 Engine: IVECO Engine Serial: 0935798 Operating Hours: approx. 2,386 h Price: €129,000 Location: Romania Description Well-maintained Rockster R700S mobile impact crusher, designed for efficient recycling of construction materials such as concrete, asphalt, and demolition waste. Compact, powerful, and easy to transport – ideal for small to medium crushing operations. Condition Good working condition Regularly serviced Ready for immediate work Lhjdpfjy E Sfvsx Aftsi Features & Equipment • Tracked mobile impact crusher • Fuel-efficient IVECO engine • Integrated magnet separator • Easy-to-use control system • High mobility and fast setup • Suitable for recycling and aggregate production Additional Information Machine available for inspection in Romania

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm Lhsdpfx Afov Nhyfstji - Engine type: Caterpillar 3126 DITA - 6 cylinders - Machine weight: 17.5 tons - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Condition: like new (used), Year of construction: 2017, For sale is a large push-floor dryer measuring 16 m × 4 m. Drying capacity is approx. 40 m³/day with residual moisture below 10%. Drum screening system, 15 m in length and 6 m in height. Spanner RE2 Facelift wood gasifiers are also available. Lhedoxuqpvjpfx Aftei

Condition: good (used), Year of construction: 2007, machine/vehicle number: 1386, functionality: fully functional, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, year of last overhaul: 2025, Hebrock Edge Banding Machine AKV 3003 DK F Edge banding machine with hot melt adhesive application Lhjdpfx Afsyud Sfjtsi to the workpiece for edge material up to 8 mm and joint trimming including DIA tools - ergonomically positioned control panel - easy adjustment options from the operator’s side (digital displays) - maintenance-free quick heat-up glue pot - robust chain drive - high-frequency crosscut saw (300 Hz) - high-frequency flush milling station incl. tool fitting and fine adjustment from the operator’s side - automatic edge feed - safety and noise protection hood - extendable workpiece support - electronic temperature controller - pneumatic end trimming for up to 3 mm edge thickness and 60 mm edge height - double roller upper pressure - signal lamp for workpiece tracking - aggregate viewing window from operator and rear side - CE-compliant safety standard complete with: - surface scraping unit - corner rounding cutter - 8 mm edge thickness Workpiece height approx. 10 - 40 mm, Feed rate approx. 10 m/min, Power consumption 11 kW (31 A) 400 Volt, 50 Hz, Length approx. 4300 mm Weight approx. 1250 kg Sold in current condition as inspected, ex location Seevetal, excluding freight and packaging, sale subject to prior sale.

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Lhsdpfjygndpsx Aftei Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts