Used Petschauer Carbide Saw Side Gridner for sale (26,422)

Condition: good (used), Saw blade diameter: 1310 mm Cutting diameter: 440 mm Machine weight: approx. 7.5 tons Dcsdpfxsz Iycce Ailsn

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 427 h, load capacity: 2,000 kg, lifting height: 4,980 mm, free lift: 1,240 mm, fuel type: electric, mast type: triplex, construction height: 2,910 mm, fork carriage width: 3,160 mm, fork length: 1,795 mm, empty load weight: 10,036 kg, total length: 3,530 mm, drive type: Elektro, construction width: 3,460 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Cushion tires Battery voltage: 80V Battery capacity: 775Ah Dsdsz Evv Hjpfx Ailocn Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing under attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this PKD 20/21/50. P.S.: Our master workshop specializes in repair, maintenance, overhaul, and customization for forklifts starting at 8 tons. We are also happy to offer your equipment for consignment sale at our premises. Fork positioner, Full free lift, Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,479 h, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, fork length: 1,100 mm, drive type: Diesel, Four-way side loader Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Fork adjustment device, Heater, full cabin Dsdpfsz Iuqhex Ailecn

Condition: used, Year of construction: 2022, Technical condition: fully functional and immediately ready for use. An inspection and a test run of the machine on-site can be arranged. If you are interested, please contact us. We can provide additional photos, a video of the machine in operation, and further technical information. Serial number: 22-05-14-028 Country of manufacture: Germany Power supply: 400 V / 50 Hz Dcsdpjz Iv Uuefx Ailen Rated current: 6.80 A Apparent power according to the nameplate: 3.459 kVA CE marking: Yes GS/DGUV certification: Yes Wood dust tested: Yes Sawing unit Minimum saw blade diameter: Ø 300 mm Maximum saw blade diameter: Ø 500 mm Speed range: 2,000–6,000 rpm Adjustable cutting height ALTENDORF HAND GUARD safety system

Condition: as good as new (ex-display), Year of construction: 2026, Roll diameter: 500 mm Overhang of the support: 485 mm Cutting depth: 320 mm Table swiveling: yes, 0 to +20° Table size: 700 x 490 mm Djdozq Dchspfx Ailscn Belt speed: 18 m/min Motor power: 2 kW / 400V Motor brake: yes / automatic Dust extraction connection: 2 x 100 mm Machine length: 920 mm Machine width: 600 mm Machine height: 1880 mm Weight: 215 kg

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) Dcjdpfxjz H Sbbj Ailen - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 5,125 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 900 mm, fork length: 1,200 mm, TECHNICAL DETAILS Mast Lifting capacity: 5,000 kg Lifting height: 4,000 mm Free lift: 900 mm Overall height: 3,340 mm Fork carriage: FEM 4 Fork length: 1,200 mm MACHINE DETAILS Mast: Standard (2S400) Drive: 4-cylinder diesel engine Dcodpfx Aez H Rypjilsn Fuel type: Diesel Engine manufacturer: Perkins Tires: Pneumatic tires Front tires: 8.25-15 Rear tires: 8.25-15 Front tire condition: 60% Rear tire condition: 60% Dimensions & Weight Dimensions (L x W x H): 4,450 x 2,000 x 3,340 mm Total weight: 8,150 kg Operating hours: 5,125 h EQUIPMENT Full cabin Heater

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Striebig Standard 6224 TRK I (Wood Support Wall) Cutting capacity Type 6224 L: 5300 x H: 2240 / H: 2100 x D: 80 mm Saw Frame • Precision machined to 1/100 mm accuracy • Solid, self-supporting, firmly welded, torsion-resistant saw frame • TRK2 automatically adjustable aluminum slatted frame with plastic supports • TRK1 automatically adjustable wood support wall • 17-position roller support with 3 brake pedals (Type 6224) • 5.15 m long, divided center support at optimal working height (Type 6224), with aluminum grids • Aluminum small parts support (1 pair) for individual use Saw Beam • Stable, durable steel saw beam construction Saw Unit • Effortless operation thanks to fully balanced Saw unit • Robust motor carriage bearings ensure high cutting precision Dcjdpfeu Nf E Asx Ailon • Powerful, high-torque 5.5 kW (7.5 HP) motor • 300/30 mm carbide circular saw blade • 9 mm saw blade projection (undercut) • Integrated stop for horizontal strip cuts • SUPERSILENT sound insulation to reduce saw blade noise • Mechanical motor brake Design, Ergonomics • STRIEBIG-typical product design • Functional and user-friendly ergonomics Installation • Wall or freestanding installation possible - Pneumatically braked support rollers A05 TRK - Paper holder - Complete aluminum small parts support (2-part) - Vertical digital measuring system

Condition: used, power: 2.2 kW (2.99 HP), pivoting range: 45 °, total height: 2,250 mm, total length: 1,300 mm, total width: 850 mm, overall weight: 500 kg, No. 04532 Band saw Kölle BG 63 Used Wheel diameter 630 mm Motor power 2.2 kW Saw blade length 4340 - 4500 mm Table dimensions 680 x 645 mm LW Saw table tiltable 0° - 45° Upper saw blade guide with guide rollers Dust extraction connection Incl. 3 spare saw blades Dcedpfxsz Eu Tdj Ailsn Incl. operating manual Transport dimensions on pallet approx. 1300 x 850 x 2250 mm LWH Weight approx. 500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed speed 6-36 m/min. Dimensions (L/W/H) 4900x1700x2000 mm weight of the machine ca. 3500 kg Control SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----- The machine is in process of partial reconditionning at our facility at the moment. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: approx. 3,550 kg Dimensions: length 4,900 mm / width 1,700 mm / height 1,700 mm 1st Spindle: _____ Djdpfxozq Hiqe Ailjcn First bottom spindle, horizontal (jointer/planer) Motor with brake, 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Tool Mount (HSK): _____ First right tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system Electronic vertical and horizontal positioning 3rd Tool Mount (HSK): _____ First left tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system with pneumatic unit Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 4th Spindle: _____ First top spindle, horizontal Motor with Brake 11 kW Speed ??8,300 rpm Electronic horizontal positioning Electronic tool diameter adjustment (setup) 5th Spindle: _____ Second horizontal top spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 6th Spindle: _____ Second horizontal bottom spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Additional technical features: _____ - 2 feed units following the top spindles to reduce the axis spacing from 620 mm to 450 mm (for short workpieces) - Driven, motorized feed roller integrated into the machine table - Pneumatic hold-down pressure before the jointing spindle (can be deactivated from the control panel) - Pneumatic feed deactivation for the final unit following the 2nd bottom spindle; operable even when the sound enclosure is closed - Pneumatic "TTL" pressure elements before the first horizontal top spindle - Air-cushion lubrication in the machine table to minimize friction - Manual lubrication pump for the machine table - Central lubrication system for guideways and controlled axes - 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) - 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) - 3 x electronic tool diameter adjustment (setup) Positions (3 – 4 – 5) - Mobile 10 control system - PRL equipment (Glazing bead package) for cutting out the glazing bead - Soundproofing and safety enclosure with electromagnetic interlock (CE standard) Dust ...

Condition: new, Number of spindles 6 St. Working width 15 - 250 mm Working height 10-200 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ----- - ??Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9" Touchscreen Manufacturer's Description (Summary): ----- 1st Spindle: HORIZONTAL BOTTOM ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 275 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool cutting circle: 125 - 160 mm Rebating unit: 20–25 mm diameter difference relative to planing head Important: Machine cannot be operated without the jointing/rebating cutter Extraction nozzle: D = 125 mm "Pro-Lock" tool clamping system 2nd Spindle: VERTICAL RIGHT ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 176 mm Clamping length (effective length): 170 mm Speed, frequency-controlled: 6,000 - 8,000 rpm Tool cutting circle: 112 - 200 mm Dsdpfx Aezrh E Noilecn Axial adjustment range: 60 mm Table plate adjustable to tool radius Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 3rd Spindle: VERTICAL LEFT: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 176 mm Clamping length (effective length) 170 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 60 mm Standard profile depth 20 mm Table plate adjustable to tool radius Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector (chips discharged downwards) "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 4th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Pneumatic pressure shoe, dynamically adjustable via linear guides Pressure lips in front of the spindle: pneumatically sprung, externally adjustable, with path control Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 5th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction: individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized ...

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Dcjdpfxoyy A Iqo Ailsn Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: used, Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg Control MemoryPlus 1 WEINIG VARIOMAT Planing and Moulding Machine ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, the infeed roller returns to its starting position for the next workpiece. Additional Features: ----- MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Dcodpfx Aijy Spvfjlsn Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-P...

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Dcodsxz Hh Ujpfx Ailen Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: new, Number of spindles 4 St. Working width 15 - 230 mm Working height 10 - 125 mm Dsdeyhq Ugepfx Ailjcn Feed speed 6 - 24 m/min.

Condition: excellent (used), Year of construction: 2008, BÖSCH/HEWEMA universal miter fence A97 for panel saws When in the closed position, 90° angle cuts are performed. When adjusting the cutting angle, the two fence profiles are moved synchronously. Cuts can be made on both the front and rear supports. The saw angle is read on the scale disc. Dcedozbytlspfx Ailjn

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way side loader Load center: 800 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 660/250-480 Rear tire type: Solid tires Rear tire size: 413/178-285.8 Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2017 Dcodpfoz Evtfex Ailjn Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts starting from 8 tons. We would also be happy to offer your vehicle for consignment sale at our facility. Fork positioner, Platform height: 530 mm

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Dodpfx Aiewzmu Rsljcn Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: new, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Dcsdpfxoxmk Dde Ailon Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: new, 0 3.700mm, 5.100mm, 6.100mm mm Working height 160 mm 0 ja Dodjxmk Agjpfx Ailscn Control ja

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 831102, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 480 mm, cutting width (max.): 780 mm, control type: manual, actuation type: manual, rotational speed (max.): 700 rpm, rotational speed (min.): 1,400 rpm, total height: 2,460 mm, total length: 1,490 mm, total width: 900 mm, overall weight: 720 kg, table height: 970 mm, year of last overhaul: 2026, roll diameter: 800 mm, saw blade length: 5,600 mm, Equipment: documentation/manual, motor brake, Dear customers, we currently offer a fully overhauled bandsaw from the HEMA brand. The machine has been repainted in new, current original colors, and the electrical system, including the emergency stop system, is completely new. Mechanical parts were either purchased from the original manufacturer or manufactured in-house. The motor has been completely overhauled. Here are some additional technical specifications of the machine: - Precision roller guide at the top and bottom, upper guide height-adjustable via handwheel, vibration-damping wheel suspension - New aluminum disc wheels with vulcanized and ground rubber linings, dynamically balanced - Stand – LEFT-hand version - With precision table swivel device with handwheel and rack and pinion - Pole-changeable motor with 2 cutting speeds, safety brake, and brake air system - Emergency stop switch with undervoltage release - Aerodynamically optimized extraction port The scope of supply includes a set of saw blades from HEMA and other machine-specific accessories. Dcodpfx Aiez Eh S Teljn Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! Dcodpjz Eh Nrsfx Ailon The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: excellent (used), Band saw grinder Pedrielli PGL80, wet grinding, for both wood and bi-metal band saws Dsdpfjz Egxxjx Ailecn

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible Dodjz Elvpepfx Ailjcn

Condition: excellent (used), CATALOG NUMBER: 7947 Dedpfx Aiszw Dw Selecn Technical specifications: - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1540mm – from above: - deflectors (barrier to prevent material from retracting) - sliding roller, metal - deflectors - sliding roller, metal - roller with saws - 2 smooth sliding rollers, metal – from below: - guide strip - deflectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 37kW - diameter of the extraction nozzle 200mm - overall dimensions L/W/H 1800x1550x1500mm - weight approximately 1700kg Advantages: - Italian made - very good condition - DTR documentation - used multi-blade saw Net price: 33900 PLN Net price: 7884 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)