Used Optima Cmf Kartonierer F for sale (33,300)

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = Compressed air, Material/air ratio = 16:1, Maximum material pressure: 90 bar, Air inlet pressure: 1 to 6 bar, 4 double strokes per 1 liter of material, Pgodeiv Huwepfx Ak Hjr with MX-type gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, available from warehouse in Seevetal, subject to prior sale.

Condition: used, Internal combustion forklift, gas-powered forklift STILL model RX 70-16T Serial No. 517314G00021, Year of manufacture 2016 Rated load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carriage width 980 mm Overall height 2160 mm Overall width 1100 mm Overall length without forks 2200 mm Self-weight 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic side shifter - Internal combustion electric drive - 4-cylinder Volkswagen internal combustion engine with 30 kW - Hydraulic power steering - Work light at the front - Rear warning light (blue) - Warning flashing light at the rear (yellow) - 4-wheel superelastic, solid rubber tires, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for starter battery, maintenance charger VICTRON - New TÜV inspection and UVV certification (surcharge 150 EUR net) Psdpfx Akeinldwe Hogr in good condition

Year of construction: 1998, condition: good (used), Screwcapper for plastic caps diameter 50mm x 20mm H 380v 7,5kw machine with cap feeder/sorter and no cap detection. Psdsh Np Uqepfx Ak Hegr speed up to 50/min as-is or adjusted to customer needs

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Milling stop with fine adjustment. Spindle diameter: 30 mm. Psdpfx Akjittnze Hegr Dust extraction at the top and bottom, each 120 mm. Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: excellent (used), machine/vehicle number: 28652, table mounting size: 250 x 800 mm Pgedpfx Akoh D Rzuo Hor x-axis: 400 mm y-axis: 175 mm z-axis: 450 mm spindle retainer: ISO 30 spindle rotations: 50-2000/50-3400 rpm operating voltage: 380 V total energy requirement: ca. 2,5 kVA kW space needed: 1200 x 1000 x 1600 mm weight: ca. 1100 kg

Year of construction: 2002, condition: used, fuel type: electric, Control, control part, interface, driving control, driving current control -Manufacturer: Jungheinrich, drive control from picking truck type: ECE 20 Pedsi Dudrjpfx Ak Hjgr -Type: AS 2412/1 F -Mat no.: 50059236 -Voltage: 24V -Number: 1x control unit available -Price per piece -Dimensions: 250/190/H100 mm -Weight: 4.2 kg/pc.

Condition: ready for operation (used), Indramat MAC117E-0-ES-2-F/180-B-1/S001 permanent magnet motor, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 28 mm, used, with normal signs of wear, 100% functional. ATTENTION: Please request the costs for packaging and shipping separately! Pjdei D Irpjpfx Ak Hegr

Condition: used, Gear motor, electric motor, stop motor, drive motor -comes from a Homag double-sided edge banding machine -Power: 3.2 kW -Speed: 2850 rpm -Construction: B5 -Shaft: Ø 28 mm Pgodpfx Akob Uhptj Hsr -Protection class: IP54 -With external fan: 0.05 kW 2520 rpm -Dimensions: 440/240/H210 mm -Weight:

Condition: good (used), Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083018100 -Number: 4x control cards available Pgjdpfxjcc Aqae Ak Hjr -Price: per piece -Dimensions: 135/65/H200 mm -Weight: 0.34 kg

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Gearbox manufacturer Bonfiglioli type: MVF44/F -Manufacturer engine AEG type: AD63NZ4 -Speeds: rpm -Power: 0.18 kW -Construction: B5 angle -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 4x engines available Podpfxoci Evto Ak Hegr -Price: per piece -Dimensions: -Weight: 7.2 kg/piece

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm Podpfx Aecnxa Njk Hjgr min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Year of construction: 1980, condition: used, machine/vehicle number: 5103811, table mounting size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle taper: ISA 40 spindle turning speed range: 40 - 1800 rpm carriages longitudinal and cross: 16 - 630 mm/min carriages vertical: 5,6 - 224 mm/min Pedpfx Asda U Dgek Hegr electrical connection: 380 V, 7,5 kVA kW space needed: 2150 x 2000 x 2100 mm weight: 2400 kg

Condition: used, Identification system -Type: BIS F-403 -Voltage: 24 V DC -Dimensions: 130/175/H45 mm Psdpfxjdkparj Ak Hegr -Weight: 0.55 kg

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm Pjdpfsb A Rqlox Ak Hjgr -Bolt circle: 172 mm -Weight: 90 kg

Condition: refurbished (used), functionality: fully functional, load capacity: 240 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: Pgjdpfx Aksrqgfkj Hor - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Werthenbach, hydraulic cylinder type H21-F-63/86-180AN -Stroke: 180 mm -Piston rod: Ø 36 mm / Thread Ø28 x 25 mm Pgodpfxegvwapo Ak Hjr -Cylinder: outer Ø 75 mm -Mounting: Bolt circle Ø 118 mm -Pressure: max. 120 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 370/140/H145 mm -Weight: 11 kg/pc.

Condition: good (used), PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, control card Simatic S5 -Type: PC 612 F B1200 6ES5281-4UA12 -Dimensions: 275/200/H50 mm Podpfxjhy Rpmj Ak Hsgr -Weight: 0.5 kg

Condition: good (used), We are offering a second-choice deep strut from the manufacturer SSI Schäfer for sale. Pjdpfx Akehzt Epo Hegr The deep strut is suitable for a frame depth of 850 mm and a crossbar width of max. 50 mm. The scope of supply includes: 1x deep strut, second choice Material color: Sendzimir galvanized Total length: approx. 865 mm For frame depth: approx. 850 mm Clear span: approx. 748 mm Technical data for the deep strut: Shelving system: SSI Schäfer Profile dimensions: C 60 x 40 x 8 mm Crossbar support: approx. 52 mm Material thickness: approx. 2.00 mm Unit weight: approx. 2.15 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.

Condition: used, Conveyor belt, trough conveyor, trough feeder, presumably GASUS type FB 400 x 5500 Belt conveyor, transport conveyor, band conveyor Factory number: F, Year of manufacture: 1996 Useful length: 5.5 meters Belt width: 400 mm Pulley diameter: 225 mm Pulley width: 450 mm Belt speed: approx. 30 meters/min Motor power: 1.5 kW Mains connection: 400 volts, 50 Hz - Drive via tubular motor - Inlet hopper 600 x 400 mm Pgodpfjhz U Azox Ak Hsr - The support stations are 2-part trough-shaped - Metal support rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles - Smooth rubber conveyor belt - Sturdy tubular frame made of steel - Cover plate above the conveyor belt, removable - For horizontal or slightly inclined transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg Good condition

Condition: new, Center distance ----- 700 mm Center height ----- 140 mm Swinging diameter ----- 280 mm Headstock bore ----- 38 mm Bed width ----- 180 mm Spindle speed ----- variable, 50-1800 rpm Frequency motor ----- 1.5 kW Included: * DELTA frequency inverter OPTIONS * Base cabinet * SINO 2-axis digital readout * Multifix quick-change tool holder incl. 4 shanks TOOA1 Psdpfx Aksga Tv Te Hsgr * Fixed steady rest * Traveling steady rest * Faceplate * 4-jaw chuck 160 mm

Condition: excellent (used), Planing cutter head (28149) Psdpfxsg Er H He Ak Hogr Manufacturer: ISCAR Type: F 90 A - D160-40 M Weight: 5 kg

Condition: excellent (used), double pump for Krauss Maffei Maschines SY2DFE1-21/071-071 KM Nr. 6441936 MNR: R900751978 Psdpfxeg I Uycj Ak Hogr

Year of construction: 2021, condition: refurbished (used), Refurbished DIAFORM unit f. JUNG HF50 / JF 520 Pjdpehcn R Ijfx Ak Hegr

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Material color: light blue Overall length: approx. 1,600 mm Profile dimensions: U 50 x 28 mm Number of holes: 2 pcs. Hole diameter: approx. 11 mm Weight per piece: approx. 1.800 kg Pgedpfxek Uyrij Ak Hor General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, mileage: 530,000 km, power: 279 kW (379.33 HP), first registration: 08/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 7,050 mm, loading space width: 2,470 mm, loading space height: 600 mm, Year of construction: 2017, Equipment: ABS, air conditioning, crane, Renault C 380 / 6x2 PLATFORM 7,05 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2017 ? MILAGE: 530 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? AIRCONDITION ? POWER STEERING ? TACHOGRAPH TIPPER: 705 x 247 x 60 cm (L x W x H) CAPACITY: 14 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 490/135 cm TIRE SIZE: 315/8022,5 SUSPENSION: FRONT: SPRING BACK: AIR Pgjdpferwdflox Ak Hjr CRANE: HIAB F135 C + REMOTE CONTROL VIN: VF630M16XGD001157 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????