Used Miyano Vc-03 for sale (5,265)

Condition: excellent (used), Year of construction: 2007, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Hsdpfjzibcisx Amyer Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: used, Year of construction: 1997, machine/vehicle number: HGS-Single A 97 03 005 Pos.6, Description for the diagram: 1 – Infeed table with cleaning unit (air blower) and crosswise brush for table width, collects residual dust from components 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 4,5 – UV lamp with conveyor – one lamp illuminating from above 6 – Quick Wood System RO1400 brushing machine 7 – Venjakob spray booth – 8 spray guns 8,9,10,11,12 – Drying tunnel with mechanical top air supply via nozzles, temperature and airflow can be regulated in 3 zones 13,14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, curing the edges as well 15 – Four-shaft brushing machine with individual height and speed adjustment for each shaft 16 – Intermediate sanding outfeed table 17 – Cleaning unit (air blower) for light surface dust removal Hodpfx Aoy Sn Srjmyjr 18 – Venjakob spray booth – single-circuit, but can be switched to a second by exchanging the entire spray gun rack (a spare is included) and switching the pump (two pumps included) 19 – Roller conveyor; lineup supported by photoelectric sensors for loading the dryer 20 – 14-shelf drying oven 22 – Outfeed table with two speed levels depending on the unloading speed required by the finishing line.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 638 h, load capacity: 8,000 kg, lifting height: 4,450 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,830 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 900 Hjdpfxozfbw Ss Amysr ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Description: Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cabin, joystick, LED, seat.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 1830108, Technical specifications: # Machining workspace: X 300 mm; Y 650 mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A-axis), 360° indexable dividing head (resolution 0.001°) # Number of pallets: 2; Maximum table load: 400 kg # Maximum clamping/part size: Ø 575 x 830 mm; maximum weight: 360 kg # Rapid traverse rate: X/Y/Z 75/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Number of spindles: 2 / spindle spacing: 300 mm # Spindle speed: 1–10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools / chip-to-chip time approx. 2.5 s # Tool max. Ø75 mm / length max. 275 mm / max. weight 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz Hodpfx Aoxw Ukvemyor # Installed power: approx. 70 kVA / 125A Dimensions: # Installation footprint: approx. 3.9 x 3.2 x 3.1 m # Weight: approx. 10,500 kg Scope of supply: # CNC control: Fanuc 30i-Model A # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling unit # High-pressure oil filtration system max. 40 bar: Knoll AE 1060 # Cooling system for spindle, guides, and switch cabinet # 2 oil lubrication units # Part present sensing (P/Y): with low-pressure air sensors # Broken tool detection: Blum Novotec Laser Light Probe # Tool support detection system in working spindle Machine condition: NOT OPERATIONAL # Magazine chain broken — REQUIRES REPLACEMENT

Condition: ready for operation (used), Year of construction: 2013, cutting speed: 12,000 mm/min, total width: 2,000 mm, total height: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: BECKHOFF, number of axes: 4, This 4-axis VOORTMAN VCS Thermo was manufactured in 2013. It features a multi-axis automated chamfering/bevel head and is equipped with a Hypertherm HPR260XD plasma source with Truehole technology. The machine includes an integrated Beckhoff operator console and Beckhoff nesting software. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VCS Thermo plasma cutting machine we have for sale. Contact us for further details. Hjdpfjzd Abpex Amyor - Cutting Head Setup: Multi-axis automated chamfering/bevel head- Plasma Source: Hypertherm HPR260XD with Truehole technology- CNC Control: Integrated Beckhoff operator console- Software: Beckhoff nesting software including security dongle- Extraction Unit: TEKA Cube filter extraction unit- Filter Condition: Minor defect reported; will be repaired and sold in fully operational condition- Additional Equipment: cutting nozzles and two heads

Condition: excellent (used), Fill 3D Ultrasonic Cutter Here we offer a Fill 3D ultrasonic cutting system. FILL 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasound-actuated cutting systems. Your advantages: Ergonomic loading and unloading Simple creation of cutting programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic cutter with low space requirements and simple kinematics. The Siemens CNC 840 D control system allows the cutting device to be programmed like a machine tool. Tool corrections or path changes can be easily carried out directly on the machine. As standard, the machine is equipped with a 20 kHz ultrasonic cutting unit. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis to allow cutting of tight radii and to save other axis movements (5 + 1 axes). Technical data: Machine data Part length max. 1,000 mm Hodpfxezdy Ias Amyjr Part width max. 900 mm Part height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control Siemens Sinumerik 840D sl Technical data overall system: Fill 5-axis guided CFRP cutting system Type: SM - 03 Electricity: Supply voltage: 3 x 400 V AC Supply frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3,920 mm Width: approx. 3,400 mm Height: approx. 3,500 mm Weight: Total weight: approx. 1,500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Type: Fill 5-axis guided CFRP cutting system Type: SM - 03 Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X350L01362, Year of construction: 2000, operating hours: 12,895 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,040 mm, gearing type: hydrostat, tire condition: 60 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), total height: 2,040 mm, color: red, Equipment: sideshift, Load capacity: 2000 kg Operating hours: 12,895 hours Type of mast: Standard Lifting height: 3000 mm Mast height: 2040 mm Side shift: YES Fork length: 1200 mm Hjdpfezhlztjx Amysr Fork width: 120 mm Type of cabin: Full cabin with heating Type of tires: Solid tires Engine: Diesel Seat belt: Yes Suspended seat: Yes, Grammer Steering lever: Yes Horn: Yes Lights: Yes The forklift has been owned for several years and regularly serviced by our workshop. Service records can be provided. Sold as is.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,036 h, load capacity: 8,000 kg, lifting height: 4,450 mm, fuel type: diesel, mast type: simplex, construction height: 3,360 mm, drive type: Diesel, Diesel Forklift Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Good Sideshift, fork positioner, 3rd valve, 4th valve, heater, soot filter, full cab, air conditioning, Hedpfx Amjzdl Ixjyer

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,717 h, load capacity: 8,000 kg, lifting height: 3,750 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,230 mm, drive type: Diesel, Diesel forklift Load center: 1100 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Hsdpfxoy N E Hbo Amyer Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire condition: 60 - 80% Description: Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, joystick, seat.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 40, total height: 2,391 mm, total length: 3,110 mm, total width: 2,960 mm, overall weight: 7,800 kg, table length: 475 mm, table width: 712 mm, controller model: FANUC, coolant supply: 20 bar, spindle motor power: 18 W, rapid traverse Z-axis: 36 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 12,000 rpm, spindle speed (min.): 60 rpm, table load: 300 kg, tool diameter: 125 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center "DOOSAN model VC430" with CNC Fanuc 0i-MD Hedpfx Amewdgk Rjyer

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,995 h, load capacity: 1,600 kg, lifting height: 4,600 mm, free lift: 1,600 mm, fuel type: gas, mast type: triplex, construction height: 2,140 mm, fork carriage width: 1,040 mm, empty load weight: 2,900 kg, total length: 2,200 mm, drive type: Treibgas, construction width: 1,080 mm, LPG forklift Load centre of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Hodpjwu Ix Dsfx Amysr Gearbox: Hydrostatic Condition: Ready for use and fully functional Technical condition: very good Front tyres type: Superelastic Front tyres size: 18x7-8 Rear tyres type: Superelastic Rear tyres size: 18x7-8 Description: operating hours read off Inspection by appointment Transport option available If you have any further questions, please call us Side shift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, half cabin, full free lift, interior mirror, windscreen wiper, single pedal,

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 16,454 h, load capacity: 8,000 kg, lifting height: 4,100 mm, fuel type: diesel, mast type: simplex, construction height: 3,170 mm, power: 115 kW (156.36 HP), fork carriage width: 2,000 mm, fork length: 2,000 mm, empty load weight: 11,500 kg, total length: 3,400 mm, drive type: Diesel, construction width: 2,230 mm, Diesel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Hydrostatic Speed class: 20 Condition: Refurbished without warranty Hjdpfex Nkwfex Amyor Technical condition: very good Front tires type: Super elastic Front tires size: 8.25-15 Rear tires type: Super elastic Rear tires size: 300-15 Description: displayed operating hours, viewing by appointment, transportation available, for further questions call. Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, front windshield, partial cabin, heating, full cabin, twin tires, interior mirror, exterior mirror, beacon, wiper, seat,

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 12,877 h, load capacity: 7,000 kg, lifting height: 6,100 mm, fuel type: gas, mast type: simplex, construction height: 4,140 mm, fork carriage width: 1,860 mm, empty load weight: 11,720 kg, total length: 3,400 mm, drive type: Treibgas, construction width: 2,200 mm, LPG forklift Load centre of gravity: 500 Hsdpfxev Dnyhj Amyer ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Gearbox: Hydrostatic Speed class: 20 Condition: Ready for use and fully functional Technical condition: very good Front tyres type: Superelastic Front tyres size: 8.25-15 Rear tyres type: Superelastic Rear tyres size: 300-15 Description: operating hours read off Inspection on request Transport option available If you have any further questions, please contact us Side shift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, half cabin, heating, full cabin, twin tyres, interior mirror, exterior mirror, rotating beacon, windscreen wiper, seat,

Condition: excellent (used), Vötsch VC³ 4018 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Machine Type: Climate Test Chamber / Temperature Test Chamber Design: Air-cooled Test Chamber Volume: approx. 190 liters For sale is a used climate test chamber from the manufacturer Vötsch. The VC³ 4018 is suitable for temperature and climate tests, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development applications. Technical Data: Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4 K/min Temperature Change Rate (Cooling): approx. 4 K/min Max. Heat Compensation in Temperature Operation: approx. 2300 W Temperature Deviation (Time): ± 0.1 to ± 0.5 K Temperature Homogeneity (Spatial): ± 0.5 to ± 1.5 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Hodpfxjzc Ht Ij Amyjr Humidity Range: 10 to 98 % RH Temperature Deviation (Time) in Climate Operation: ± 0.1 to ± 0.3 K Temperature Homogeneity (Spatial) in Climate Operation: ± 0.5 to ± 1 K Humidity Deviation (Time): ± 1 to ± 3 % RH Heat Compensation in Climate Operation: approx. 400 W Test Chamber Dimensions (approx.): 580 x 450 x 750 mm (W x D x H) Housing Dimensions (approx.): 870 x 1550 x 1800 mm (W x D x H) Weight (approx.): 470 kg Refrigerant: R404A Refrigerant Quantity: 2.50 kg ND max.: 22.5 bar g HD max.: 25 bar g Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 4.1 kW Rated Current: 14 A Test Chamber Lighting: Halogen, 2 x 24 V / 50 W Equipment Touch Panel Operation Viewing Window in the Door Stainless Steel Test Chamber Test Chamber Lighting Side Pass-Throughs Shelves / Interior Fittings as Shown in Pictures Documentation / Operating Manual Further Accessories as Shown in Pictures Condition Used Optical Condition as Shown in Pictures Scope of Delivery as Shown Inspection Possible by Appointment Safety Note For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Due to the size and weight, shipping by freight forwarder is recommended. Scope of delivery as shown. Subject to change and errors in the technical data, as well as prior sale.

Condition: new, Heidenhain ROD 260 6000 01-03 angle encoder, no. 331 881-78 SN:16013141, unused, 100% functional, scope of delivery as per photos. Hjdpfx Aox Er Scomyjr

Condition: ready for operation (used), Heidenhain UM 121B Id. 336 949-03 SN:11856143B The item has been fully overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hjdpfx Ajx Ethfemyor

Condition: ready for operation (used), Indramat TVD 1.3-08-03 Power Supply MNR: R911268887 SN: 268594-03905, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as per photos, used, in good condition, 100% functional, delivery as pictured. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Hodpfx Amox Ety Ijyer

Condition: ready for operation (used), Siemens 1FT6062-4AF71-3AH1 synchronous servomotor SN: E J899 2998 03 001, used, good condition, 100% fully functional, scope of delivery as per photos. Hsdsw Dxdcspfx Amyer

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW IndraDrive Cs MNR: R911344555 SN: 7260405435793, used, normal signs of use, 100% functional, scope of delivery as per photos Hedpforyiqfjx Amyer

Condition: new, Siemens 6RA8261-2EA00 C98043-A1098-P13-03-85 module, unused, 100% functional, scope of delivery as per photos Hsdpox Dxfdofx Amyor

Condition: ready for operation (used), AGIE PMO-03 Power Module, Output 616021.2, Serial No. as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hodpfei D Txiox Amysr

Condition: ready for operation (used), Siemens 1FT5044-1AF71-3EB0 AC-VSA-Motor + Heidenhain ROD 426 2500 03S12-03 Encoder Id. 376 846-E8 SN:27752438B ,used, normal signs of wear, 100% functional, scope of delivery as per photos Hodsvbnlxspfx Amysr

Condition: ready for operation (used), REFU 317/03-AB01 frequency converter SN: 6000-1697-0006 - 3AC 0-4000V / 50/60Hz, used, good condition, 100% functional, scope of delivery as per photos Hsdpfxetvcucj Amyor

Condition: new, Balluff BIS00A9 BIS C-602-019-xxx-03-KL2 24 Vdc evaluation unit with BIS C-670-00,3 cable and BCC011N connector, unused, 100% functional, delivery as per photos. Hedpfxsy Np Ene Amyjr

Condition: new, Heidenhain MT 25W incremental measuring probe SN: 22362184H, unused in opened original packaging, 100% functional, delivery contents as per photos. Hodpey Nqkxofx Amyer