Used Memory Submodule for sale (854)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: Kjdjzzn Hlopfx Abzsnb 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: ready for operation (used), Year of construction: 2015, Weinig Powermat 700 6x 40mm Spindles. CNC on spindles 3, 4 and 5. Width 20-230mm Height 10-160mm Memory system Automatic lubrication system for bedplates. No 1.  11kW - Bottom 7000rpm No 2. 7.5kW - Right 7000rpm No 3. 7.5kW - Left 7000rpm No 4. 15kW - Top 7000rpm No 5 . 11kW - Top 7000rpm No 6 . 11kW - Bottom 7000rpm Knsdpfoz An S Dex Abzob Electronically variable feed. 40m/min Short infeed table. Marathon coating for machine bed plates. Manuals & hand tools.

Condition: excellent (used), Year of construction: 2021, Almig Belt XP 8 screw compressor Year: 2021 Technical details: Volume flow at 8 bar 1m³/min Rated motor power 7,5 kW Dimensions 800x670x1100mm Kedpfszmhgvjx Abzsnb Weight 275 kg Power on hours: 11867 Load hours: 4755 Remaining time air filter/oil/oil filter change: 1468 hours With Air control B Optional operating modes: Automatic Load / no-load Programmable automatic restart: yes Local operation – remote On/Off: yes Error memory (no. of items): 20 Control for refrig. dryer: COMBI yes Master function (Baseload changeover mode): no Slave connection to higher order control systems: yes Display: illuminated Under power in our warehouse.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Kodpfx Aezqc Aajbzjnb Manual (If available in the Packaging) Original packaging 3 Months Warranty The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles diameter 40mm Memory System control Knsdpfx Ajzxx D Nsbzsb table lubrication spindles speed 6000 RPM

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter Ksdpfxju A U Nkj Abzsnb  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Knsdpfx Asxwmacebzob Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Constant working height with combined unit with steel contact roller and electronic CPS articulated pressure beam with 25 mm pitch Sanding width 1100 mm Abrasive belt length 1900 mm Workpiece thickness min./max. 3–150 mm Feed speed: infinitely variable 2.5–13 m/min Grinding unit 11 kW Paint package: - infinitely variable belt drive speed via frequency converter - Belt blow-off device - Vacuum conveyor belt with blower Control system: - Terminal with 50 programme memory slots - simple menu control via plain-text display - visual display of the active elements in the processing line - Fully automatic PLC-controlled start-up sequence for all drives - digital time and attendance recording with cleaning brush Roller table at the inlet Roller table at the outlet Extraction capacity 1850 ³/h Extraction connections: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Knjdpfezk Nlbjx Abzjb Compressed air connection 6–8 bar Air consumption 10 l/min Weight 2,200 kg Availability: at short notice Location: Röllbach

Condition: used, mileage: 39 km, power: 150 kW (203.94 HP), first registration: 03/2026, fuel type: electric, color: blue, number of seats: 5, Equipment: ABS, air conditioning, navigation system, * Ambient lighting, 30 colors * Armrests for front seats, on both sides * Windshield in heat-protection glass, with heating function * Lumbar support, pneumatically adjustable on both sides * Seat heating for both seats in the cab, with separate control on the left and right Kodpfx Abewz T Epjzsnb * App-Connect incl. App-Connect Wireless for Apple CarPlay and Android Auto * 9 speakers (5 speakers at the front and 4 speakers at the rear) * Digital radio reception (DAB+) * Mobile phone interface "Comfort" with inductive charging function * Navigation system "Discover Pro" * Anti-lock braking system (ABS) * Airbags for driver and front passenger, with front passenger airbag deactivation * Automatic Distance Control ACC "stop & go" with speed limiter * Anti-theft alarm system with interior monitoring, backup horn, and towing protection * Driver assistance system "Travel Assist" including lane keeping assist "Lane Assist" and "Emergency Assist" * Emergency brake assist "Front Assist" with pedestrian and cyclist detection * Automatically dimming interior rearview mirror * Proactive occupant protection system in conjunction with "Front Assist" * Power steering, electromechanical, speed-dependent * Rear view camera "Rear View" * Windshield wiper intermittent control with rain sensor * Lane change assist "Side Assist" * Traffic sign recognition * 11 kW AC charging power (alternating current) * USB-C interfaces * 4 light alloy wheels "Solna" 8 J x 20 at the front, with 10 J x 20 at the rear, in black, polished surface * Trailer hitch, foldable, with electrical release * Deletion of trim for the infotainment display, central control elements, and steering wheel from electric white to black * Assistance package "Plus" including area view "Area View" with rear view camera "Rear View" * Swerve support and turning assistant * Driver-side exterior mirror, convex; passenger-side exterior mirror, convex * Exterior mirrors, electrically adjustable, foldable, and heated, with passenger-side mirror lowering function * Three-point automatic safety belts in the front with belt and end-fitting tensioners and height adjustment * Dynamic high beam control "Dynamic Light Assist" for LED matrix headlights * Trim for the infotainment display and central control elements in black * Electric tailgate (opening and closing) with "Easy Open" and "Easy Close" function * Electric motor system output 150 kW; base engine: N06/N07 * Transmission for electric drive (1-speed) * IQ.LIGHT - LED matrix headlights with automatic headlight control, bad weather light, and welcome function * Climatronic air conditioning system "Air Care Climatronic" with active combination filter, stationary air conditioning, and 2-zone temperature control * Comfort seat on the left and right, in the 1st row of seats * Short wheelbase, short rear overhang * LED luggage compartment lighting * Light alloy wheels "Solna" 8 J x 20 at the front, 10 J x 20 at the rear, in black, polished surface * Headlamp range adjustment, dynamic, with dynamic cornering light * Memory function for "Park Assist Plus" parking assistant * Multifunction steering wheel in artificial leather, with touch operation, and heated * LED rear lights with dynamic turn signal * Parking assistant "Park Assist Plus" incl. parking assistance * Radio "Ready 2 Discover" with 30.48 cm (12") touch color display * Wheel bolts with extended anti-theft protection * Rear view camera "Rear View" as an alternative to the area view "Area View" in the "Plus" assistance pac

Condition: used, Year of construction: 2003, Used Machine Year of Manufacture: 2003 Features and Technical Specifications: - Control system with LCD display - Swiveling control panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Joining milling unit 1961: - 2 x 2.0 kW - Diamond jointing cutters in synchronous and counter-rotating operation, Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of roll and strip stock Adhesive application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - PUR adhesives can be used Press Unit 1816: - With driven roller - Pneumatic control of the press unit Trimming Unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling Unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle on the milling unit Corner Copying Unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius Skiving Unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius skiving blade Surface Skiving Blade 1964: - Insert-controlled surface pulling blade - Air nozzle on the surface pulling blade Buffing unit 1940: - Edge thickness for roll material: 3 mm - Edge thickness for strip material: 5 mm - Max. edge thickness for corner copying: 3 mm - Workpiece thickness: 6–45 mm - Workpiece thickness for corner copying: 45 mm - Min. workpiece length: 180 mm - Feed speed: 8 m/min - Workpiece support spacing: 470 mm - Support plate diameter for edge material: 800 mm - Trimming blade for roll material up to: 3 mm - Warm-up time: 3.5 min - Power of jointing milling unit: 2 x 2 kW - Power of trimming saw: 2 x 0.22 kW - Power of the milling station: 2 x 0.6 kW - Power of the corner copying unit: 0.22 kW Knodjzk Nwwepfx Abzob - Exhaust port for the jointing milling unit: 120 mm - Exhaust port for the milling unit: 70 mm - Exhaust port for planer unit: 70 mm - Dimensions: 5,350 x 1,669 x 1,940 mm - Weight: 1,200 kg

Condition: used, Year of construction: 2019, - Brand : CMC / Renault - Type : PLA 220 - Year of manufacture: 2019 - Weight: 3240 kg. - Hours : 490 hours - Odometer: 223,295 km. - Tow hitch: 3500 kg. Knedpfx Abezwvucozob - Working height: 22 meters - Side reach: 15 meters - Automatic stamping - Return home function - Memory function - New safety inspection possible - Aerial work platform book with maintenance history available - CE document present - Belgian registration, NL plate possible - Video on our website - Trade-in and transport possible * Brand: CMC / Renault *Type: PLA 220 * Construction year: 2019 * Weight: 3240 kg. * Working height: 22 meters Lateral reach: 15 meters Mileage: 223,295 km. Tow hitch: 3500 kg. * Hours: 490 uur Video on website: Yes Aerial work platform book: Yes CE document: Yes

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Memory 10 GB Ethernet I/P Interface Kedpoy I Ak Iefx Abzenb Wire EDM in good condition. *

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 • Tool changer: SMTC • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Technical Specification Taper Size SK 40 Knjdjyid Hvspfx Abzob

Condition: used, mileage: 212,940 km, power: 143 kW (194.43 HP), first registration: 03/2017, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, MERCEDES-BENZ E 220 E T-Model E 220 d Special equipment: Storage package, AMG Line interior, Analog clock, Dashboard upper part in Artico leather-look, Interior trim: aluminum, Stainless steel pedals, sports design, Headliner, black, Seat cover / upholstery: Artico / Dinamica leather-look, Ambient lighting, Steering wheel (Nappa leather, flattened at the bottom), Audio-navigation system: COMAND Online, Touchpad (center console), Infotainment system: Remote Online, Equipment package: Business, Preparation for navigation system (Garmin MAP Pilot), Driving assistance system: active parking assist, Navigation module Garmin MAP Pilot, Infotainment system: Remote Online, Heated front seats, Fuel tank: enlarged, Tires with run-flat system, Fire extinguisher, Remote control for tailgate, Instrument cluster with variable display (widescreen cockpit), Light alloy wheels front/rear: 8x20 / 9x20 (AMG, multi-spoke, black), Memory package, PRE-SAFE system, Night package, Exterior mirrors painted black, Roof rails, Rear and rear side windows tinted, Panoramic sunroof, electric (fully glazed roof area), Parking package, Driving assistance system: active parking assist, Special paint metallic hyacinth red (designo paint), Mirror package, Exterior/interior mirrors with automatic anti-dazzle function, Surround sound system Burmester, Additional equipment: Airbag on passenger side can be deactivated, Airbag driver/passenger side, Pelvic airbag front (Pelvisbag), Design and equipment line AMG Line, AMG optics/styling package 1, Roof rails (aluminum), Comfort chassis lowered (Agility Control), Driving assistance system: Agility Select / Dynamic Select (driving mode switch), Power windows electric front + rear, Luggage/cargo compartment cover incl. safety net, Rear lights LED, Infotainment system: Mercedes me connect, Isofix mounting points for child seat in the rear, Body: 5-door, Automatic climate control (Thermatic 2-zone), Knee airbag driver side, Head airbag system front, Mercedes-Benz emergency call system, Engine 2.0 Ltr. - 143 kW CDI CAT, PRE-SAFE system, Rear seat back split / foldable, Low emission according to emission standard Euro 6, Side airbag (Sidebag) front, Front seats electrically adjustable, Socket (12V connection) in the trunk/cargo area Kodpfxozzgn Io Abzenb We will gladly assist you with financing/leasing options through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: used, mileage: 21,681 km, power: 110 kW (149.56 HP), first registration: 01/2025, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * "Style" * 17" front disc brakes and 16" rear disc brakes * 2 individual seats facing rearward (Vis-a-Vis configuration) in the 2nd row of seats * 2 vehicle keys * 2 USB-C ports in the front, 4 USB-C charging ports in the passenger compartment * 3-zone automatic climate control system "Air Care Climatronic" with an additional control panel in the passenger compartment (not for Beach trim) * 4-cylinder diesel engine, 2.0L, engine code 05L.E * 7-speed dual-clutch transmission (DSG) * AGR ErgoComfort seats in the front, leather upholstery including seat ventilation, electrically adjustable, only for drivers with memory and massage functions * AGR seat, electrically adjustable, front left, with 4-way adjustable headrest, only for drivers: with memory and massage function * Exhaust system, WLTP3 M1, N1-I//EU6EA * Driver alertness system and fatigue detection * Adaptive Chassis Control (DCC) with standard suspension * Airbags for driver and front passenger, with front passenger airbag deactivation * Ambient lighting, 30 colors, including footwell lighting for the 2nd row of seats (not for California with rotating seats) * Trailer hitch, mechanically pivoting and electrically releasing, with trailer maneuvering assistant * App-Connect including App-Connect Wireless for Apple CarPlay and Android Auto * Armrests for driver and front passenger seats, on both sides, with electrically adjustable lumbar support and folding table * Advanced assistance package * Evasive maneuver support and turning assistant * Automatic Distance Control (ACC) "stop & go" * Exterior mirror housings in high-gloss black * Two-tone seat covers, seat center panels in leather "Savona, perforated for AGR seats, seat bolsters in smooth leather look * Chrome trim on the sides and rear * Decorative trim "Dark Silver Brushed" * Anti-theft alarm system with interior monitoring, backup horn and towing protection * Digital Cockpit Pro * Digital radio reception * Three-point automatic seat belts in the front with belt tensioners and height adjustment * Three-point automatic seat belts in the rear outer seats and belt tensioners in the outer rear seats with ECE label, belt tensioners only for the 2nd and 3rd row seats * Dynamic High Beam Assist "Dynamic Light Assist" for LED matrix headlights * EU6 4-cylinder turbocharged diesel engine, 2.0L, R4, 110 kW (150 PS), TDI (EA288) * Electronic Stability Program and electromechanical brake booster * Driver assistance system "Travel Assist" including Lane Assist and "Emergency Assist" * Driving profile selection for DCC * Front-wheel drive * Windshield in laminated safety glass, heat-insulating and noise-reducing, heated * Speed limiter and "Intelligent Speed Assist" Knsdpfx Aox Iy Rlebzob * Glove compartment with lighting * Head-up display * Power tailgate (opening/closing) * Tailgate with electric opening and closing * IQ.LIGHT LED matrix headlights with LED daytime running lights * Plastic floor covering in wood-look, with reinforced tread * LED rear lights * Illuminated strip between the headlights * Headlight range adjustment, dynamic, with dynamic cornering lights * Compliant with UNECE CS&SU * Mobile phone interface "Comfort" with inductive charging function * Multifunction leather steering wheel with shift paddles, heated * Multifunction camera * Navigation system "Discover Pro" with 25.4 cm (10") touch color display including "Streaming & Internet" * Luggage compartment partition net * Emergency brake assist "Front Assist" with pedestrian and cyclist det

Condition: used, mileage: 54,400 km, power: 195 kW (265.13 HP), first registration: 07/2023, fuel type: gasoline, next inspection (TÜV): 06/2028, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, Special equipment: Storage package, luggage compartment separation (net), rear cup holders, parking assistance package with remote parking assistant, driving assistance system: parking assistant, parking aid plus front, side and rear, acoustic and visual with environment display, Audi smartphone interface, controls with glass optics, incl. extended aluminum look, business package, touring assistance package, driving assistance system: emergency assistant with automatic emergency call, driving assistance system: predictive efficiency assistant, driving assistance system: adaptive driving assistant, exterior mirrors electrically adjustable, heated and foldable, with automatic anti-glare and memory function, exterior mirrors with curb assist, right, Bluetooth hands-free system with voice recognition (Audi Phone Box), parking aid plus front, side and rear, acoustic and visual with environment display, comfort climate control 4-zone, front seat heating, interior mirror with automatic anti-glare function, anti-theft wheel locks, driving assistance system: exit warning, interior trim: interior elements in synthetic leather top and bottom, contour / ambient lighting package (plus), headrests, variably adjustable, fuel tank: 73 liters, lumbar support front, electrically adjustable, light alloy wheels 8x18 (5-arm, for winter tires), metallic paint, new car tire warranty, panoramic sunroof front electrically, rear fixed, spare wheel as emergency spare, seat cover / upholstery: leather / 550 combination, sound system Bang & Olufsen Knjdpfsztk Suox Abzjb Additional equipment: Airbag on passenger side can be deactivated, airbag driver / passenger side, ambient lighting, Audi connect (internet-based services), Audi connect (emergency call and assistance system), Audi drive select, exterior mirrors, aspherical, left, exterior mirrors, aspherical, right, exterior mirrors, vehicle color, turn signal lights LED integrated in exterior mirrors, headliner, fabric, silver, roof rails, anodized, door sill trims with aluminum insert, driving assistance system: occupant protection system (Audi pre sense basic), driver information system (FIS) with color display, rear seat system (3 seats), windshield with heat-insulating glazing, glossy package, rear lights LED, interior trim: decorative inserts aluminum fragment, Isofix mounts for child seat, body: 4-door, head airbag system (Sideguard), steering column (steering wheel) mech. height / longitudinal adjustment, light alloy wheels, mild hybrid 195 kW (engine 2.0 L - 195 kW 16V TFSI), mild-hybrid technology, multi-media interface MMI Basic Plus / MMI Radio Plus, multi-media interface MMI Navigation, non-smoker package, Otto particle filter (OPF), radio reception digital (DAB), rear seat back split / foldable (40:20:40), low emission according to emission standard Euro 6d, heated windshield washer nozzles, luggage compartment, rail system, side airbags front, seats front manually adjustable, standard suspension, start / stop system, jack, heat-insulating glazing (side / rear)

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm Kodpsydaadefx Abzonb X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 285 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: FANUC, controller model: 21i-TB, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, number of axes: 3, This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4" color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details. Knsdezwd Hgjpfx Abzeb - completely overhauled in 2026- Operating Hours: 0h after overhaul- Center Height: 175 mm- Center Distance: 1000 mm- Machine Base: Mineral cast Granitan S103- Strokes: 285 mm (X-axis) x 1150 mm (Z-axis)- X-axis Drive: AC Servomotor and ball screw, 0° angle, feed rate 0.001–5.000 mm/min- Z-axis Drive: AC Servomotor and ball screw, feed rate 0.001–10.000 mm/min- Measuring System: Incremental scale for X and Z axes, resolution 0.0001 mm- Grinding Headstock: Universal for external and internal grinding, Hirth serration 1° (-15° to +195°)- Motor Spindle (Pos. 2): 7.5 kW, 1400 to 3200 rpm, programmable cutting speed max. 50 m/s- External Grinding Guard: Wheel size D. 500x63mm F1 (80mm F5) with automatic contact protection- Internal Grinding Spindle (Pos. 3): Studer belt-driven internal grinding spindle (180°) with frequency inverter- Workhead Stock: Universal, roller bearing mounted, taper MK5, cylindrical outer nose D. 70mm, spindle bore D. 28mm, manual spindle lock- Workhead Drive: 1.8 kW AC Servomotor, speed range 1–1500 rpm, jog speed 1–50 rpm- Workpiece Weight: Max. 80 kg between centers- Tailstock: Taper MK4, 35 mm stroke, quill diameter 50 mm, hydraulic quill retraction with monitoring, manual fine adjustment +/- 0.04 mm- Pneumatic Lifters: Pneumatic lift-off for easy shifting of workhead and tailstock- Control System: Fanuc 21i-TB with 10.4" color touch screen, integrated PLC, 32KB user memory, 400 program storage slots- Power Supply: 400V +/- 10%, 50 Hz +/- 1Hz, 24V DC control voltage Optional Equipment: - Dittel Sensitron 6 contact detection with magnetic sensor (1 pc)- Movomatic C25 LP active probe- 3 pcs levelling elements- Air conditioning unit for electrical cabinet- Euchner hand-held control unit- Swiveling dresser for internal grinding- Park position for tailstock- 3 pcs Studer belt-driven internal grinding spindles (24,000 rpm / 40,000 rpm / 60,000 rpm)- Foot pedal for C-axis override with open doors- Foot pedal for clamping device actuation (tailstock)- Electrical interface for rotary dressing (spindle optional)- Movomatic in-process gauge control ES 124 control (measuring head optional)- 8 pcs used grinding wheel flanges for external grinding- Various new MK4 centers- Various dressers Additional Capabilities: - Capable of thread and form grinding (software must be requested directly from Fritz Studer AG)

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 - Operation: continuous from supply bin - Bin volume / drum Ø: 1.4 m³ / 1500 mm - Working height: 900 mm, left → right - Material / Housing: AISI 304 stainless steel + plexiglass - Safety: door switches, overload protection - Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar - Container size: round Ø ≤100 mm × 250 mm, larger on request - Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 - Filling: mass flow, 8 stations (expandable to 12) - Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h - Working height / direction: 900 mm, left → right - Product-contact parts: AISI 316, food-grade hoses, VITON seals - Tank / Pressure: 100 L, 5 bar - Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar - Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes - CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program - Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 Knjdpfx Abexqzmwozjb - Operation: continuous rotary, 4 capping stations - Output: up to 5,000 containers/h - Container size: Ø ≤100 mm, H ≤300 mm - Working height / direction: 900 mm, left → right - Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools - Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar - Control: B&R controller, touchscreen, 200 format memories, password-protected - Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system - Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: 0i-F, total height: 3,107 mm, total width: 3,350 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,692 mm, number of axes: 3, This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022 but was never in production. It features a table size of 1,400 x 670 mm and a rapid traverse of 30 m/min in both X and Y axes. The machine is designed for heavy-duty milling with box guideways for maximum rigidity. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details. • As new, showroom model • Table size: 1,400 x 670 mm • Rapid traverse (X/Y/Z): 30 / 30 / 24 m/min • Tool magazine capacity: 40 stations Kedpfjzn Uqqox Abzjnb • Maximum workpiece weight: 625 kg • Guideway type: Box guideways on all axes • Memory: 400 tool offset memory slots • Cooling system: Milling spindle cooling • Stability/construction: Highly stable design for heavy-duty milling; box guideways provide maximum rigidity and vibration damping • Spindle: High-performance spindle with high torque characteristics • Automation/Safety (machine features): Load monitoring; Auto shut-off • Maximum height when the Z-axis is fully extended: 3107mm Additional equipment • Oil skimmer (filtration) • Bar feeder interface (prepared for external bar feeder) • basic package of tool holders included • no bar feeder included (can be purchased optional, price upon request) • no chuck included • retrofits possible (price upon request) Technical Specification Taper Size ISO 40

Condition: excellent (used), functionality: fully functional, LOCK INSPECTION SYSTEMS MET30+ | Industrial conveyor metal detector Knsdpfxozdb Ebs Abzeb Manufacturer: Lock Inspection Systems Model/Type: MET30+ 3f Overall dimensions: 3000 x 1100 x 1900 mm Belt width: 600 mm Detection aperture dimensions: 620 x 270 mm The MET30+ 3f is a professional, industrial metal detector from the British brand LOCK INSPECTION SYSTEMS (now part of the renowned Loma Systems group), representing a technologically advanced inspection device designed for demanding production lines in the food sector (meat, bakery, frozen food, processing) and the pharmaceutical sector. Equipped with a multi-frequency "3f" system and advanced digital signal processing (DSP), the detector guarantees the highest level of detection sensitivity. The device easily identifies small metallic contaminants – including ferrous metals, non-ferrous metals (e.g., copper, aluminum), and particularly difficult-to-detect magnetic and non-magnetic stainless steel, regardless of their depth within the product. The core of the machine is a powerful head with a wide 620 x 270 mm inspection window, working in conjunction with a conveyor belt with a width of 600 mm. These technical parameters allow for the seamless inspection of large-sized products – bulk packaging, cartons, frozen blocks, and products fed in bulk on a continuous system. The MET30+ model features built-in memory that allows saving programs for many different products and an advanced product effect compensation function. This effectively eliminates false alarms caused by the natural conductivity of the food being inspected (e.g., high humidity, salt content in meat, or freezing temperature), while maintaining maximum precision in operation.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Kjdpfx Abeyf Ncqezjnb Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: used, Year of construction: 2008, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Haas VF3YT/50 CNC milling machine. Ideal for precision machining of metals and other materials. Year of manufacture: 2008 Specifications: Axis travel: X-1016mm, Y-660mm, Z-635mm Table: 1372mm x 610mm Rapid traverse rate: 18 m/min Table load: 1814 kg Spindle taper: SK50 Spindle speed: 7500 rpm Spindle gearbox: 2-speed Spindle power: 22.4 kW Number of tools in the magazine: 30 pcs Machine weight: 7.5 t Dimensions: L x W x H 3.5 x 2.4 x 2.9 m The machine is equipped with: - Renishaw OMP40 workpiece probe - TSC internal spindle cooling - Automatic chip conveyor - Programmable coolant nozzle - Side tool magazine - Rigid tapping - Macro - HSM high-speed machining option - Increased memory up to 16MB It is possible to equip the milling machine with a 4th-axis rotary table. The machine has been serviced, is in good working order and ready for operation. The milling machine can be inspected and tested at our company's premises. If you have any questions or require additional information, please send a message or contact us by phone. Knjdpfszwhlgjx Abzsb

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain Kodpoymyp Rofx Abzsnb - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: used, mileage: 179,000 km, power: 190 kW (258.33 HP), fuel type: diesel, gearing type: automatic, first registration: 12/2016, next inspection (TÜV): 09/2028, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Special equipment: Exterior/interior mirror with automatic anti-glare function, Connect Plus (Bluetooth, Apple CarPlay, WLAN, Vehicle Tracking System), Porsche Car Connect, Driver Memory Package, Window trim strips, black (high-gloss), Front panel, stainless steel, Floor mats, Compass system in the instrument cluster, Fuel tank: 75 liters, Lighting Comfort Package, Porsche Communication Management (PCM) incl. DVD navigation module, Digital radio reception (DAB+), Smoker's package, Front seat heating, Sunblind on side windows in the rear, Burmester High-End Surround sound system, Voice control system Additional equipment: Kedpfoyzk Axex Abzenb 3rd brake light, Passenger airbag can be deactivated, Airbag driver/passenger side, Acoustic package, Trailer stabilization program, Trailer coupling preparation, Anti-slip control (ASR), Automatic brake differential (ABD), Exterior mirror, aspherical, left, Exterior mirror, electrically foldable, Exterior mirror, electrically adjustable and heated, Turn indicators, LED, On-board computer, Brake calipers, silver anodized, Automatic activation of headlights, Door sill trims (aluminum), Driver assistance system: Multi-collision brake, Power windows, front + rear, Windshield with band filter at the top, Cup holders, Rear lights, LED, Rear window, heated, Interior: Standard equipment, synthetic leather / Alcantara, Interior filter: Activated carbon filter (odor filter), Interior package: black (high-gloss), Isofix mounts for child seat in the rear seat, Body: 4-door, Automatic climate control, 3-zone, Comfort headrests, Comfort seats, front, Head airbag system (curtain airbag), Loading edge protection (aluminum), Steering wheel (sports/leather, 3-spoke) with multi-function and gearshift function, Light alloy rims, Engine 3.0 liters - 190 kW V6 TDI CAT, Engine drag torque control (MSR), Parking brake, electric, Porsche Traction Management (PTM), Wheelbase 2807 mm, Tire repair kit, Rear seat back, split, Low emission according to emission standard Euro 6, Side airbags, front, Seat belts, black, Seat cover / upholstery: Alcantara / synthetic leather, Start/stop system, Universal audio interface, Mobile phone/cell phone preparation with Bluetooth interface