Used Matcon 600 Litre for sale (12,136)

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Rjdpoi Uli Eefx Aahsw

Condition: good (used), 600mm MultiFormer direct from meat-free factory, fitted with optional BridgeBreaker. Other 600mm machines available from same line. Rsdjv H D N Dspfx Aahow

Condition: excellent (used), WetCoater 600 in lovely condition. Uprated model with HD heavy duty pump. Rodpjx Hbfhjfx Aahew

Condition: excellent (used), Almost as new 900 litre twin shaft paddle mixer. Complete with touchscreen controls, EasyClean system and caged tote bin hoist. Machine has come from a meat-free facility where it was only in use for a short time. Rodst N Ulwopfx Aahsw

Year of construction: 1998, condition: like new (used), GEA WetCoater 600 batter enrober. 600mm wide weir type batter enrober. Redpfxeigru Dj Aahsw

Condition: not inspected (used), 7m 600mm thermal oil fryer with top hold down belt. Has come direct from production. 7m frying length, 600mm belt width. Electric canopy hoist. Rjdpjht Hgnefx Aahow

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Rjdpemrrwfofx Aahsw

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,684 h, load capacity: 2,500 kg, lifting height: 5,180 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,380 mm, battery capacity: 620 Ah, remaining battery capacity: 92 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25/600 electric forklift with the following specifications: * Operating hours: 1,684 * Lifting capacity: 2,500 kg * Lifting height: 5,180 mm * Overall height: 2,380 mm * Year of manufacture: 2017 Still 2.5-ton electric forklift with a fully enclosed cabin and heating, very good battery from 2023, tires in excellent condition, triplex mast with full free lift, side shifter, lighting compliant with German road traffic regulations (StVZO), fork length 1,200 mm (other fork lengths available upon request), charger. Includes 1,000 hours of service according to Still manufacturer specifications and a valid UVV inspection upon sale. Rjdpozfxzzofx Aahjw Inspection, demonstration, and test drive are available by appointment only. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-equipped low-loader (transport costs upon request). You can find more information about us and our other offers on our website.

Condition: good (used), functionality: fully functional, Bridgeport VMC 600 22 CNC machining center with Heidenhain TNC 410 / 426 control system -Travel X-axis: 600mm -Travel Y-axis: 410mm -Travel Z-axis: 520mm Rjdezhg Riopfx Aahsw -Table load capacity: 500 kg -Spindle taper: SK 40 ISO/BT -Spindle power: 8.5 kW -Speed range: 40 to 6000 RPM -Tool changer: 22 positions -Number of controlled axes: 3 -Year of manufacture: 2000 -Length: 2800 mm -Width: 2050 mm -Height: 2300 mm -Weight: Approx. 2500 kg

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds as needed: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Rodpfezhg Eysx Aahjw Hydraulic feed pressure device (HNDE), infeed hood, Available from approximately the end of July.

Condition: used, Year of construction: 2015, operating hours: 1,332 h, lifting height: 4,600 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Linde H20D-02/600 diesel forklift, year of manufacture: 2015, hours: 1,332 h, rated load capacity: 2,000 kg, lift height: 4,600 mm, triplex mast, hydraulic side shift, full cab, engine: [30 kW/41 hp], weight: 3,690 kg, fork length: 2,400 mm, in good condition! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! Power steering, cabin = Further information = Lifting capacity: 2,000 kg Overall height: 215 cm Rodpfxezhff Es Aahsw Please contact Tobias Ebert for further information.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,693 h, load capacity: 2,000 kg, lifting height: 3,230 mm, fuel type: diesel, mast type: simplex, construction height: 2,287 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Sideshifter, 3rd valve, heater, full cabin, Rodpozhdgujfx Aahjw

Year of construction: 2000, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Rjdpfozfkwbjx Aahow Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, Used Winkworth approximately 30 litre capacity (product dependant) stainless steel z-blade mixer. (2) stainless steel z-blades driven by 3kw, 3/50, 1450 rpm motor. Rsdezfigbopfx Aahow Weight: Estimated: Kg1000.0

Condition: used, Used Ardeth Engineering approximately 70,524 litre total capacity (approximately 50,000 litre working capacity product dependent) stainless steel vertical reactor vessel. Unit has welded dished top and bottom heads. Internal rated 8 bar/full vacuum design pressure at 350 deg.c. External limpet coil jacket rated 8 bar/full vacuum at 350 deg.c. Internal coil rated 8 bar/full vacuum at 350 deg.c. Unit includes top entry stainless steel 2-tier, 4-blade agitator with bottom mounted steady bearing. Agitator driven by Hagglunds type SM CB 2000 hydraulic drive. Reactor is mounted on (4) mild steel side support lugs. Specifications: Capacity: 70,000 L Internal Pressure: 8 bar Rjdszfifdspfx Aahjw Internal Temperature: 350°C Jacket Pressure: 8 bar Jacket Temperature: 350°C Type Of Heads: Welded Dished Legs/Lugs: Lugs

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Rodpszfh U Djfx Aahjw Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. Rjdpfezfh Uqjx Aahsw This unit is ready to run. A video of this mixer is available below.

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Colour: Grey Weight: 1.600 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 Rsdpfx Asyf H H Hsahew - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, all stainless steel belt width 600 mm mobile Rodpfx Aaszfgb Njhsw mesh width 5 mm adjustable speed with air knives with batter pump

Condition: used, Year of construction: 2016, Operating hours of the machine: 1271 h Maximum feed width: 600 mm Processable sheet thickness: 1-120 mm Working height, constant: 850 mm Voltage: 400 V (50 Hz) / 480 V (60 Hz) Rated current: 30 A Rated power: 17 kW Protection class: IP 42 Feed rate, continuously adjustable: 1-4 m/min Depth: 1930 mm Width: 1600 mm Height: 1550 mm Machine weight, approx.: 2200 kg With the Pluto, you are opting for a compact machine for deburring parts cut with oxy-fuel and plasma processes. Features: - Tolerance and distortion compensation up to 6 mm - Durable steel wire brushes for edge finishing - Magnetic clamping system across the entire working width Rjdpfx Aozg U Slsahsw - Heat-resistant conveyor belt made of chrome leather - Incl. extraction system

Year of construction: 2009, operating hours: 24 h, condition: excellent (used), functionality: unexamined, machine/vehicle number: KNI099171, The machine has been in storage for several years and has not been used recently. Its functionality has not been tested, therefore it is explicitly sold as untested. However, it should still function without any problems when connected to a power source. It is in good, used condition and has always been stored completely and in a dry place under a roof. A box with matching film can also be taken with it. The purchase documents, as well as all other relevant documents and instructions, are also still available in their original form. Inspection is possible by arrangement. Loading is the responsibility of the buyer. Please feel free to contact us if you have any questions! Rjdpjzg U Hpofx Aahsw

Condition: used, functionality: fully functional, Digital Height Gauge TRIMOS type TVM 600 Redpfxozg Ux Ss Aahsw Travel: 600 mm Column diameter: Ø 45 mm Granit base dimensions (L x W x H): 200 x 140 x 60 mm In working condition

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 10 kW (13.60 HP), travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 18, table length: 800 mm, table width: 375 mm, controller model: SIEMENS 810 M, rotational speed (max.): 6,000 rpm, Control: CNC path control with SIEMENS 810 M display TECHNICAL DATA Travel range X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table working area 800 x 375 mm Drive power 10 kW Speed range up to 6000 rpm Tool holder (DIN 69871) ISO 40 Automatic tool changer Number of tool positions 18 Max. tool diameter 150 mm EQUIPMENT/ACCESSORIES - Enclosure with electrically interlocked doors - Automatic tool changer ATC 18 - Spindle orientation - Coolant system with water tank and submersible pump, 2.5 bar - Chip tray - 2 mechanical/hydraulic vices, jaw width 125 mm - 3D probe, mechanical with tool holder - Approx. 30 various tool holders, partly equipped with tools - Machine feet - Documentation included Max. tool length 210 mm Tool change time 3 sec Axis feed range 0 – 10,000 mm/min Rodpfx Aaouiyb Njhsw

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location Rjdszg Tlwepfx Aahsw SK 40

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm Redpfx Aaszg Tivjhsw SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.