Used Liquid Packaging Line for sale (22,696)

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs Lsdpfx Aloz D S Sbjbjah - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, mileage: 113,682 km, power: 140 kW (190.35 HP), first registration: 02/2019, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 7, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 88631A Equipment lines and packages * PS2 AMG Line * ZH8 Avantgarde Edition * MX0 BlueEFFICIENCY package * ZH8 Design and Equipment Line Avantgarde Edition * JP2 Driving Assistance Package * Z3N Night Package * EZ6 Parking Package with 360° camera * FP3 Mirror Package Exterior * E57 Trailer coupling: electrical system for trailer socket * Drive type: rear-wheel drive * Exterior mirrors, aspherical, both sides * Exterior mirrors, electrically foldable * F69 Exterior mirrors, electrically adjustable and heated, both sides * F69 Exterior mirrors with integrated turn signal * Exterior mirrors with blind spot assist * Exterior mirrors with ambient lighting * Exterior mirrors, painted black * Brake calipers with lettering (Mercedes-Benz) * AMG roof edge spoiler * D14 Aluminum roof rails, anodized * C74 Door sill panels with Mercedes-Benz lettering (illuminated) * Window for rear doors / tailgate with wiper / washer system * W16 Window in the cargo / passenger compartment: fixed, front left * W17 Window in the cargo / passenger compartment: fixed, front right * AMG front skirt * LED rear lights * W64 Rear window, lift-up * Heated rear window * AMG rear skirt * LG2 Intelligent Light System LED * Body / structure: van * Body / structure: long * KB5 Fuel tank: enlarged * Radiator grille, painted black * Light alloy wheels * IL6 Metallic paint * IN2 Wheelbase 3200 mm * RR6 Spare wheel with jack * JF1 Windshield wipers with rain sensor * T19 Sliding door, cargo / passenger compartment, left * T55 Sliding door, right, electrically operated * Daytime running lights * XA5 Permissible total weight 3.2 t Interior * SZ7 Storage net on the left front seat backrest * Storage net on the right front seat backrest * LC1 Ambient lighting * Outside temperature indicator * Roof lining / headliner, fabric, black * LB9 Entry lights * Power windows, electric, 2-way * VH1 Grab handles in the rear * Interior filter: pollen filter * HZ7 Automatic climate control in the rear (Tempmatik) * HH4 Comfort automatic climate control Thermotronik * SH9 Head airbag system (window bag) * YG4 Cargo area divider * CL3 Steering wheel (leather) * FG0 Center console in front with roller shutter / storage compartment * UR1 Seat equipment: quick-release mechanism for seat rail system * VX7 Seat cover / upholstery: Lugano leather * Seats in the cab: co-driver's seat, heated * Seats in the cab: co-driver's seat with lumbar support * H16 Seats in the cab: driver's seat, heated * SE5 Seats in the cab: driver's seat with lumbar support * US6 Seats in the cargo / passenger compartment: 1st row, 1 single seat, left * US7 Seats in the cargo / passenger compartment: 1st row, 1 single seat, right * US5 Seats in the cargo / passenger compartment: 2nd row, 3-seater bench, comfort * FS5 Sun visors with mirror (illuminated) * Sport pedals, brushed aluminum * Rear window, tinted / black glass * H00 Warm air duct to the cargo / passenger compartment Multimedia * JA1 Display for windshield washer fluid level * EJ9 Audio navigation system: COMAND Online * Hands-free system Bluetooth Lsdpfozll Nfex Albeah * Infotainment system: Remote Online * JK5 Instrument cluster with color display * EY3 Communication module Mercedes me connect (Internet-based services) * Media Interface (universal interface for iPod / AUX / USB) * EY5 Mercedes-Benz emergency call system * E65 Surround sound system Burmester * Service interval display Assyst Comfort and Environment * E07 Hill-start assist * Direct steering with va

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Lsdpfx Alsw R Sknebsah Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: good (used), Year of construction: 2000, functionality: unexamined, Equipment: documentation/manual, Eccentric press VSS, type LE 400 C, complete with LASA strip feed system. Press LE 400 C Table size 1250 x 895 mm Ram size 950 x 560 mm Weight 21,000 kg Nominal capacity 400 t (metric tons) Stroke rate 40/min Stroke length 450 mm Dimensions 1550 x 2900 x 3610 mm Laodpfx Ajz Rk Shelbeh Unwinding reel – up to 4000 kg - Coil outer diameter – 1600 mm - Coil inner diameter – 450/550 mm - Strip width – 450 mm - Revolutions – max. up to 25/min LASA 400 strip straightening machine - Adjustable height - Speed – up to 70 m/min - Complete documentation - More information and detailed images available upon request - The straightening machine with unwinding reel can also be sold separately. Press – after inspection - Stroke adjustment and clutch-brake

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Condition: Used line Video: Machines and Equipment Ledpfx Alez Ri N Eobsah 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute 2. Air conveyor – Lanfranchi, year 2006 3. Chiller – MTA, year 2026 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Labelling Machine – ANKER Roland 8/3 For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Steam-heated for filler CIP, with disk change system, Year: 2012. Lodpfx Asz Ri Rislbsah

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines. Lodjrtq I Eopfx Alboah

Condition: used, mileage: 581,685 km, power: 350 kW (475.87 HP), first registration: 04/2011, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: black, gearing type: automatic, emission class: euro5, total length: 6,600 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, * MB CD radio with Bluetooth * Hands-free system * AXION rear view camera system * SNOOPER navigation system with external monitor * MB FleetBoard * Air conditioning * CB radio * On-board computer with multi-function steering wheel * Auxiliary heater * Electric sun visors * Electric auxiliary air conditioning * Cool box * Leather seats ----* Emergency brake assist * Lane keeping assist * Roll stability control * Hill start assist * Differential lock, rear axle * Headlight cleaning system Lajdpfsz N Rllsx Albeh ----* PTO for superstructure hydraulics * Pintle hook coupling with DouMatic * Engine brake ----PROTEC TM50 towing system * !!!!!FULLY EQUIPPED!!!!! * Tools & accessories * 2 winches * 2 hydraulic outriggers ----* Tire size, front axle: 385/55R22.5 * Tire size, rear axle: 315/70R22.5 * Fuel tank: 300 liters * Technically permissible total weight: 18000 kg * Unladen weight: 12095 kg * Overall length: 6600 mm * Inspection due: / ----Vehicle number/Vehicle: 12464----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recoveries and vehicle transport.----YOUR VTS TEAM

Condition: good (used), Washing machine: GTA, year of manufacture: 2003 Press: ZP 3.1, year of manufacture: 1995 Sealing unit: VFL-1D/27. Year of manufacture: 2009 Dosing unit: DOS-1PSD. Year of manufacture: 2009. Material: polysulfide. Main components: Glass washing machine with inlet and outlet up to and including the gas press, inspection station, gas-filling press with outlet up to the end of the automatic sealing unit, automatic sealing unit. System configuration: see sketch Max. glass height: 2700 mm Max. glass length: 3500 mm The washing system’s drives have been refitted with new bearings. This very well-maintained system is still in operation. Ledpjz Scanjfx Alboah Viewing is possible by appointment. Condition: good, second-hand

Condition: like new (used), Year of construction: 2014, operating hours: 4,036 h, functionality: fully functional, saw blade diameter: 500 mm, Paul C11 MKL Machine in excellent technical condition MAXI 6 Premium control system – supports over 15 languages Lsdpez N Dw Iefx Albeah Saw blade feeding mechanism with servomotor Fully optimized 4036 operating hours 5 ejectors Machine ready for operation

Condition: used, Second-hand Weinig UC-Matic window production line, comprising: - Material feed station - Unirex No. 1 - Unirex No. 2 - Turner - Unitec - Univar 12 - Complete mechanisation Laedoz Dtwxjpfx Albeh Including Oertli Vienna IV 72 & 92 window tool set for timber and timber-aluminium Technical data: - On request.

Condition: excellent (used), mileage: 574,043 km, power: 261 kW (354.86 HP), first registration: 04/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,510 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, seat heater, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Android Auto - Rear work lights - Front work lights - Heated mirrors - Heated exterior mirrors - Leaf spring suspension - Brake booster - Combination lights - Roof spoiler - Remote central locking - High beam headlights - Windshield - Closed cab - Speed limiter - Interior lights - Cab Laodpfx Aoz Sqdgelbsh - Tilting hydraulics - Refrigerator/cooling drawer - Beacons - Air suspension - Air-suspended seats - Air horn - MX engine brake - Parabolic spring suspension - Particle filter - Radio/CD player - Radio/cassette player - Rotating beacon - Disc brakes - Sleeper cab - Hose sets - Seat heating - Sun visor - Voice control - Stability control - Automatic heating system - Tool box - Wind deflector - Central lubrication - Device transfer = Additional Information = General Information Number of doors: 2 Year of construction: 2021 License plate: 66-BRH-8 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: 12T2210, automatic Axle Configuration Maximum front axle load: 8000 kg Rear axle 1: Lift axle; Max. axle load: 7500 kg Rear axle 2: Max. axle load: 11500 kg Weights Unladen weight: 8,759 kg Payload: 18,241 kg GVWR: 27,000 kg Interior Number of seats: 2 Maintenance APK (Technical Inspection): valid until 04.2027

Condition: used, Second-hand SAC window production line comprising: - Automation - SAC Type P5 (left-hand) - SAC Type P5 (right-hand) - SAC Type T400 Lodez Dttyepfx Alboah - Window tool set IV 72/92 for sashes Technical data: - On request

Year of construction: 2016, condition: new, functionality: fully functional, Location: Germany. Conservation, storage and supervision by Siemens AG Gasturbine Model: SGT5-4000F (8), new and unused Manufacturer: Siemens AG Year of manufacture: 2016 Frequency: 50 Hz Fuel: Natural Gas (NG) and DieselOil (DO) Guaranteed Performance Gross Power Output [MW]:298,2 (NG) –301 (DO) Gross Heat Rate [kJ/kWh]:8979,3 (NG) –9538,5 (DO) Generator: SGEN5-1200 A Includes: by-pass stack and diverter damper GasTurbine(GT) Auxiliaries Base module, comprising the auxiliary Fuel gas and ignition gas within separate compartment. Lube oil with plate type heat exchanger 2x100%. Hydraulic oil supply for valves and actuators. Hydraulic clearance optimization Natural gas Flow metering for performance test Naturalgas drainingsystem Dual fuel module, comprising the auxiliary packages Fuel oil (with 2x100% fuel oil pumps) Purgewater NOx (with 2x100% NOx water pumps) Sealing Air Supply system Advanced compressor cleaning system, including piping connection to cleaning water nozzle system GT Control System Control system type: SPPA-T3000 Turbine controller Redundant automation processor for closed-loop control functions I/O modules, as per I/O Turbine failsafe protection and trip system Failsafe system for protection and trip functions Turbine function group automatic and operational protection system: Redundant automation processor for open-loop control functions, sequence control functions and operational protection functions I/O modules, as per I/O I&C Cables: Turbine related special instrument cables at turbine and on skids (from sensor to junction box) Turbine related special control cables (flame monitoring cables) GT Systems Air intakesystem: • Filter systemwithpulsefilter stage • Inlet air filter house including weather Hood, bird screen weather Louvre, internal support structure, instrumentation, lighting, power sockets, access ladders, platforms and doors • Interconnecting duck work with expansion joint, manhole, damper and silencer • Ant-icingsystem • Electrical hoist for maintenance (250 kg) • DehumidifierforGT standstill • Nozzle system for compressor cleaning inside air inlet plenum Exhaust gas system: • Exhaustgasdiffuser •Compensator between GT and exhaust gas diffuser GT Electrical Equipment PowerControlCenter (UBA01/UBA02) AC Power Supply System (2) • Low voltage switchgear, AC MCC (BFE / BME) Ljdpfxjz Sqbro Albsah DC PowerSupplySystem: •DC Voltage distribution (BUB/BUC): 2 •Battery (BTA): 1 •Battery charger (BTL): 2 •DC/DC converter(BUK): 2

Condition: used, Year of construction: 2003, machine/vehicle number: 792-1162 A, For sale is a Schüco Isomat 4, manufactured in 2003. This machine offers an interesting solution for companies looking for a robust and functional machine for processing profiles. The Schüco Isomat 4 is designed for processing profiles with a maximum cross-section of 400 × 250 mm. With a processing speed of up to 45 m/min, the machine enables rapid processing. The feed speed is 15 m/min. A special feature is the quick-change system with a total of 12 pressure rollers, allowing the machine to be adapted to different profile requirements. The selling price consists of the net price plus VAT. Technical data: Lasdpfez Spw Ejx Alboh • Height (mm): 1680 • Depth (mm): 980 • Rated power (machine): 1.57 kW • Compressed air: 7 bar • Profile cross-section: max. 400*250 mm • Insulation strip spacing: 300 mm • Processing speed: 45 m/min • Feed speed: 15 m/min • Pressure rollers/quick-change system: 12

Condition: excellent (used), Year of construction: 2014, URBAN welding and cleaning line consisting of AKS 6410/4 - 35-30, maximum welding size = 3,500 x 3,000 mm from right to left, sealing press-down device, 0.2 mm limit for colored profiles, WINDOWS control, with TBA cooling table, URBAN SV 530 facing machine with 4 axes, very good tool equipment, turning station, CNC cleaner also with WINDOWS control, line completely overhauled and in technically perfect condition. Lsdpfx Alsz Rqgloboah

Condition: ready for operation (used), Year of construction: 2007, HPM 12-33-2 Lasdsz Spu Depfx Alboh two-roll machine, 3300mm wide, 1200mm diameter, steam-heated. Width approximately 460cm and length 8 meters.

Condition: used, ESPEC Temperature Shock Chamber / Liquid-to-Liquid Shock Chamber ESPEC TSB-51 Temperature Shock Chamber Temperature range: Hot bath +70 °C to +200 °C / Cold bath -65 °C to 0 °C Approximately 13,611 operating hours Air-cooled Lodpfx Aljz Hb Tysbeah For sale is a used liquid-to-liquid temperature shock chamber from the manufacturer ESPEC CORP. The temperature shock chamber is suitable for thermal shock testing, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The system operates with a liquid-to-liquid testing process with a movable test basket between the hot and cold baths and features a programmable controller. Technical data: Manufacturer: ESPEC CORP. Type: TSB-51 Equipment type: Liquid-to-liquid temperature shock chamber Operating hours: approx. 13,611 h Temperature range, hot bath: +70 °C to +200 °C Temperature range, cold bath: -65 °C to 0 °C Bath volume: approx. 55 liters Test basket: 150 × 150 × 200 mm (W × H × D) Internal dimensions: 290 × 350 × 520 mm (W × H × D) External dimensions: 1200 × 1785 × 1320 mm (W × H × D) Weight according to nameplate: 800 kg Power connection: AC 400 V / 3-phase / 50 Hz Max. power consumption: 22 A Refrigerant 1: R404A Refrigerant quantity: 2.8 kg Refrigerant 2: R508A Refrigerant quantity: 0.89 kg Equipment: Programmable ESPEC controller with display Liquid-to-liquid temperature shock testing system Movable test basket Hot bath and cold bath Overcooling protection Overheating protection Operating hour counter RS-485 interface ESPEC OnlineConverter PN5-CN Ethernet and USB interfaces Operating manuals as shown in the pictures Application areas: Temperature shock testing Thermal cycle testing Material testing Electronics testing Component testing Automotive Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Device powers on / Controller and display are active Scope of delivery: 1x ESPEC TSB-51 temperature shock chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The Mécan'Outil TGV/S automated production line is designed for the assembly of roller shutter casings made from PVC and aluminum profiles. The machine was delivered to a production facility in 2021. The unit is in very good technical and visual condition, making it an excellent investment for companies involved in the production of roller shutter systems. Price: 85,000 EUR (negotiable) Detailed technical specifications are available in the attachments. Lajdpfx Asz E Nzcjlboh Please contact us for further information and to arrange a viewing of the machine. This is a fully equipped production line that can quickly begin operation in a new facility. Highly recommended.

Condition: used, Year of construction: 2009, machine/vehicle number: INC37, Used SMI TF350 Tray packaging machine for PET 2009Technical Specifications & Performance DataThe SMI TF350 is a tray packaging machine designed for the secondary packaging of PET bottles. Built in 2009, this industrial packaging machine forms bottle packs into trays for efficient handling, transport, and distribution within a used bottling line. It provides a practical solution for beverage production facilities requiring dependable end-of-line packaging equipment.Manufacturer: SMIModel: TF350Year of manufacture: 2009Production capacity: 45-50 packs/minContainer handling: PET bottlesAdvanced Automation & Control SystemsThis tray packer is intended for automated packaging operations, supporting the organized grouping of PET bottles into tray configurations. Machines of this type are integrated with synchronized product infeed and discharge systems to maintain consistent pack flow through the secondary packaging stage. The TF350 can support streamlined operation in industrial packaging environments where repeatable pack formation is required.Production Line Integration CapabilitiesThe SMI TF350 can be positioned downstream of filling, capping, labeling, and bottle conveying equipment in a PET bottling line. It is suited to beverage production layouts where filled bottles must be grouped and prepared for palletizing or further distribution. Its capacity of 45-50 packs/min enables integration with appropriately matched upstream and downstream equipment.As a second hand tray packaging machine, it can be considered for line upgrades, replacement projects, or the expansion of existing bottling equipment. Correct integration requires compatible bottle conveyors, pack discharge handling, tray supply arrangements, and coordination with downstream palletizing or warehouse logistics systems.Machine Condition & Maintenance HistoryThe machine is in very good condition and has been regularly maintained. Extensive annual overhauls have been carried out by the manufacturer, supporting continued operational reliability. The tray packer remains in production until September 30, 2026, demonstrating that it is part of an active packaging process prior to dismantling.Operational Performance & VersatilityDesigned specifically for PET bottle handling, this tray packaging machine supports the secondary packaging stage of beverage production. Tray packing helps create stable, manageable bottle groups for storage, transport, and subsequent pallet handling. The machine is suitable for producers seeking used bottling line equipment that supports organized end-of-line operations without changing the primary filling process.Its role in industrial packaging is to convert a continuous flow of bottles into defined tray-packed units, improving product handling between production and distribution stages. Final pack configuration and compatibility should be coordinated with the bottle format, tray design, conveyor layout, and required downstream logistics flow.Installation Requirements & Site PreparationInstallation should be planned around the existing bottle conveyor route and the required infeed and discharge elevations. The machine is scheduled f... Ledpfez Nxdcex Albjah

Condition: used, machine/vehicle number: LC661, Used CFT-JORDAN complete fruit and vegetable puree production lineTechnical Specifications & Performance DataThis used bottling line is configured as a complete aseptic filling and processing line for fruit and vegetable purees. It integrates preparation, thermal treatment, deaeration, sterilization, and aseptic bag-in-bin/bag-in-drum filling. Designed for industrial packaging and food-grade production, it offers second hand value with robust stainless steel construction and modular components suitable for continuous operation.Main aseptic filler: MACROPACK TM2000/3Filling performance: up to 90 bags/hour (220.0L) or 30 bins/hour (1000.0L)Processing capacities (typical): crushers 9–15 t/h; enzymatic deactivators 20 t/h; vacuum deaerator 20 t/h; sterilizer 17 t/hThermal equipment: Pasteurizer 1.5 t/h (4000 x 1600 x 2350 mm); Enzymatic Deactivators ETS 20 fast/slow; Sterilizer OLIMPIC TC XX/ASUtilities (selected): sterilizer steam 2100 kg/h; deactivator steam 2000 kg/h; aseptic filler steam 50 kg/hKey powers (selected): Sterilizer 120 kW; Enzymatic Deactivator fast 18 kW; slow 12.5 kW; Aseptic filler 10 kW; pumps 1.2–18.5 kWMaterials: stainless steel tanks and sanitary pumps for hygienic product contactContainer formats: 220.0L bags; 1000.0L binsAdvanced Automation & Control SystemsThe line features modular automation at machine level with integrated motor control on pumps and thermal units. The aseptic filler is equipped for controlled dosing and steam-assisted sterilization of filling circuits. Operator panels on key units enable parameter setting for temperatures, flow rates, and timings. Safety interlocks and emergency stops are included on major modules such as the sterilizer, deactivators, and filler. Quick-change product hoses, sanitary clamps, and pump speed adjustments support rapid changeovers between puree types and package sizes.Production Line Integration CapabilitiesThis second hand aseptic processing and used bottling line is engineered for cohesive operation across preparation, thermal treatment, deaeration, sterilization, and aseptic filling. The included conveyors, pumps, and buffer tank ensure stable product flow, while the CIP station enables in-place cleaning of product-contact circuits. The system suits food and beverage production environments handling natural and concentrated purees.Machine typeManufacturer / ModelYearVarious EquipmentA Facchini 905/20 (Elevator)2007Various EquipmentCrusher 15 t/h (circular blades)Various EquipmentCrusher 9 t/h (studded shaft) Lasdpfx Aljz E Dh Dsbeh

Year of construction: 1999, condition: used, machine/vehicle number: LC654, Used ALFA LAVAL oil production lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous production with a throughput of 2 tons per hour. Built around proven Alfa Laval technology, the line combines robust mechanical design with food-grade materials to ensure reliable operation and consistent oil quality. Its modular configuration streamlines the core olive oil extraction steps from washing and preparation through malaxation and separation.Overall capacity: 2 tons/hourDecanter centrifuge: Alfa Laval NX 17Disc separators: Alfa Laval 407, automatic (2 units)Malaxers (double): Stainless steel (3 units)Malaxer (small): Stainless steel, with paste pump P 60 (1 unit)Crusher: Stainless steelOlive elevator: Integrated feedingOlive washer: Pre-cleaning and debris removalElectrical control panel: Alfa LavalConveying: Various screw conveyors for paste and by-productsThe equipment list emphasizes sanitary stainless-steel construction, automated separation, and balanced material handling to minimize oxidation, protect product integrity, and support high-efficiency operation.Advanced Automation & Control SystemsAutomation centers on an electrical control panel that coordinates key process units for safe, consistent performance. Automated Alfa Laval 407 disc separators provide steady clarification with reduced manual intervention. Interlocks and standard operator safeguards support secure running and streamlined start/stop routines. The configuration is designed for straightforward parameter control, facilitating repeatable results across production shifts.Production Line Integration CapabilitiesThe line is configured for seamless integration from raw olive reception to downstream storage tanks and final packaging. Its modular equipment layout connects via screw conveyors, an olive elevator, and a washer, enabling continuous flow into the crusher, malaxers, decanter, and separators. This processing core can be paired with industrial packaging solutions or a used bottling line for vegetable oil filling into PET or glass containers, aligning with broader beverage production and food-oil packing environments.Machine type/categoryManufacturer / ModelYearOlive Washer—Olive Elevator—Olive CrusherStainless steelMalaxers (double)Stainless steel Laodpfxsz E Dibe Alboh

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 9,000 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2008Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000 Laedpfxoz E Dkxo Alboh

Condition: used, Year of construction: 2004, machine/vehicle number: LC637, Used Sidel-Krones PET bottling line 18000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for PET bottle handling and optimized for still water applications. Built with premium components from Sidel, Krones, AROL, SMI, Twinpack, ACMI, TOSA, ., and Videojet, it delivers consistent performance at industrial scale. The line operates at a production capacity of 18,000 bph and is configured for the most common market formats.Production speed: 18,000 bph 2L, 23.000 BPH 0,5L Container types: PET bottlesBottle formats: Compatible with 0.5L and 2.0L bottle formatsPrimary components: Sidel SBO 16 Series 2 blow molder (16 molds), Sidel ALSIM gravity filler (63 valves), AROL capping system (pre-threaded plastic caps), Krones CONTIROLL roll-fed labeler (1 station, 16 bottle plates), SMI SK452 F shrink wrapper, Twinpack MHTE handle applicator, ACMI PASAR P130 2L layer palletizer, TOSA 125 + 475 ring pallet wrapper, . R 13/2 preform tipper, Videojet 3210 laser coderAir recovery: Integrated with blow molderChiller: Not includedTooling: Blow molds not includedBuild years (components): 2000–2024Advanced Automation & Control SystemsThe line integrates modern automation features across critical stations to ensure stable performance and high-quality output in beverage production. The Krones CONTIROLL labeler features electric head adjustment for precise label placement, while the capping system by AROL uses a pick & place distribution to ensure reliable application of pre-threaded plastic caps. The Sidel ALSIM filler operates within a pressurized cabin equipped with filters to support hygienic filling conditions.The Sidel blow molder includes an air recovery system to optimize compressed air utilization. Operator interfaces across the equipment provide intuitive adjustment and monitoring, supporting quick startups, changeovers, and routine operations in high-throughput environments typical of industrial packaging.Production Line Integration CapabilitiesThis second hand used bottling line is designed for seamless integration from preform handling to end-of-line palletizing. The . preform tipper, hopper, elevator, and preform infeed supply the Sidel SBO 16 Series 2 rotary blow molder. Downstream, the gravity filler and AROL capping machine form a robust monobloc for consistent filling and closure application. The Krones CONTIROLL labeler applies plastic wrap-around labels via a roll-fed station, supported by a Videojet 3210 laser coder for high-contrast coding. Secondary and end-of-line packaging are handled by the SMI shrink wrapper, Twinpack handle applicator, ACMI layer palletizer, and TOSA ring wrapper.Inline configuration from preform tipping through palletizingFormat change capabilities for 0.5L and 2.0L PET bottlesSuitable for water production with PET containersMachine Condition & Maintenance HistoryThis used bottling line is presented in working condition with components manufactured between 2000 and 2024, including a recent 2024 Videojet coder for coding in... Laedpfx Aloz E Dk Eobeh

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: LC676, Used Tetra Pak TBA 19 200ML Slim Filling machineTechnical Specifications & Performance DataThis used bottling line is built around a Tetra Pak TBA 19 V10 filling machine for 200 ml Slim carton formats. Designed for dairy product processing, the line provides an integrated solution for filling, straw application, secondary packaging and product conveying in an industrial packaging environment.Filling machine: Tetra Pak TBA 19 V10Container format: 200 ml Slim Tetra Brik cartonProduct application: dairy productsYear of manufacture: approximately 1996Running hours: approximately 26,000 hoursConveyor system: approximately 30 meters, including 4 x 90° curves and 2 x chain tensionersAdvanced Automation & Control SystemsThe line combines dedicated filling and packaging equipment into a coordinated production arrangement. Its conveyor system supports the controlled transfer of individual cartons between the filling, straw application and packaging stages. Chain tensioners are included to help maintain reliable conveyor operation and product flow through the line.Machines of this type are typically operated through the individual controls of the filler and downstream packaging modules, allowing operators to manage the principal filling and handling stages from the relevant equipment stations.Production Line Integration CapabilitiesThis complete carton bottling line is configured for the 200 ml Slim format and includes filling, straw application, tray packing, tray shrink wrapping and conveying equipment. It is suitable for integration into dairy beverage production operations requiring a compact line layout for Tetra Brik cartons.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 19 V101996Various Equipment - Straw ApplicatorTetra Pak TSA 211996Various Equipment - ConveyorsTetra Pak1996Case PackerTetra Pak TCBP 70 Multiinfeed1996Shrink WrapperTetra Pak TTS 511996The Tetra Pak TCBP 70 Multiinfeed tray packer is compatible with, or can be configured as an option for, wrap-around packaging. The Tetra Pak TTS 51 tray shrink wrapper completes the secondary packaging process after tray packing.Machine Condition & Maintenance HistoryThe second hand bottling line has been workshop checked, fully tested ... Lsdpfxez E Dgaj Albsah