Used Lateral Hydraulic Press for sale (26,123)

Condition: good (used), Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm Redpsb I Dqaofx Amyocd -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers Rjdjvu Sqxepfx Amyocd -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm Rjdpfx Aoupbdgomyjcd -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: good (used), Hydraulic press, single column press, C-column press, oil hydraulic press, hydraulic single column press, press machine, hydraulic punch for Schüco tools hydraulic press, multifunctional punch, punch, universal punch, punching machine Rcjdpou Scp Refx Amyod -Hydraulic press: Hydraulic single-column press with stops on both sides -Pressing force: 15 tons -Hydraulic unit: 220 bar stroke: 25 mm -Hole: Ø 28 mm -Projection: 100 mm -Operation: foot pedal -Installation dimensions: 2575/800/H1350 mm -Transport dimensions: 1260/800/H1350 mm -Weight: 223 kg

Condition: ready for operation (used), Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press Rcjdpfxob A Nkbe Amysd - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Rjdpszku Axsfx Amyecd Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2975/1999, functionality: fully functional, operating hours: 20,637 h, power: 48 kW (65.26 HP), input voltage: 400 V, pressing force: 100 t, stroke length: 820 mm, operating speed: 470 mm/s, reverse speed: 447 mm/s, table width: 1,000 mm, table length: 720 mm, table height: 950 mm, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 910 mm, oil tank capacity: 2,100 l, total length: 3,100 mm, total width: 2,300 mm, total height: 4,850 mm, overall weight: 17,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, The machine was used in single-shift operation for prototype production, with CNC 50 control, impact damping, drawing cushion force of 400 kN, stroke of 150 mm, drawing cushion area of 600x550 mm, and regular UVV inspections. Includes a light curtain and a mechanically adjustable depth stop. Features hydraulic die clamping. Redpozkrl Dofx Amyocd Dismantling and transport are not included in the price.

Condition: good (used), Hydraulic straightening press Manufacturer: G + K Year of manufacture: 1992 Max. pressing force: 130 t Table size (bottom): 800 x 500 mm with T-slots Rcsdpfjzkg Igjx Amyjd Table size (top): 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 AC, 24 DC Control system renewed 5 years ago The machine is equipped with 2 tables, one at the bottom and one at the top, each measuring 800 x 500 mm. A throttle valve is installed on the hydraulic unit to adjust the pressure.

Condition: good (used), Year of construction: 1991, Electric workshop hydraulic press Capacity: 50 tons. Rcsdpfxszhfzms Amyjd Table width: 800 mm, cylinder stroke: 200 mm.

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Hydraulic Pressure: 100 bar Stroke Length: 180 mm Rcsdpfsu Hkfpsx Amyjd

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Rsdpjxlp T Iofx Amyecd Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm

Condition: used, Year of construction: 1996, functionality: fully functional, We are selling our used Dunkes HDS 100: Pressing force 1000 kN Ram stroke 300 mm Installation height 400 mm Table height above floor 950 mm Table surface W x D 830 x 630 mm Rjdpfxezi D R Ae Amyscd Ram surface W x D 830 x 630 mm Ram bore / tool clamping diameter Ø 50 mm Machine dimensions W x D x H 2120 x 1565 x 4000 mm Oil volume 650 liters Rapid traverse or approach speed 400 mm/s Screen control, type CNC50 PLC control S5-95U Available upon agreement. Sold without warranty or right of return.

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm Rcodpfx Amoyif Nrjyjd oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 2022, Force: 3000 kN; Stroke: 250 mm; Dimensions: 705 x 500 x 500 mm; Weight: 11.5 tonnes; Hydraulic press, nominal pressure: 260 bar; Maximum pressing force: 300 tonnes. Rsdpfxozgv Rcs Amyjcd

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Rjdpfxezgdc He Amyecd Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: used, Zschokke HAP 063a - 4/6 - Hydraulic press brake Rjdszf Hniepfx Amyecd - Year of manufacture: 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 bar - Distance between uprights: 4100 mm - Max. bending length: 6000 mm - Overhang: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance between tool clamping surfaces: 300 - 800 mm Hydraulic pumps: - Main pumps: 2 x 22 kW - Delivery rate at idle: 2 x 153 l/min - Delivery rate at full load: 2 x 33 l/min - Control pump: 0.75 kW Installation: - Footprint (W x D): 6960 x 3250 mm - Height above ground: 4100 mm - Undercarriage, front: 2200 mm - Undercarriage, rear: 600 mm - Operating voltage: 3 x 400 V / 50 Hz - Machine weight: 51000 kg

Condition: good (used), Pressure 63to Rodpoch Dacjfx Amyjcd Stroke -400mm Distance ram-table 700mm Table size 1800x500mm MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Rodpeudph Iefx Amyjcd

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Rsdpfxjy H Rdgj Amyjcd Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: excellent (used), I sell a Lukas baler in very good condition. Rsdpfx Amsum Htzjyocd

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 30 h, pressing force: 150 t, stroke length: 1,200 mm, table width: 800 mm, table length: 800 mm, retraction force: 20.5 t, overall weight: 14,700 kg, Equipment: documentation/manual, safety light barrier, This is a brand-new Langzauner press that was never used due to a company restructuring. Rjdozh I Ddspfx Amyjcd Data sheets can be provided upon request.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 1872080, functionality: fully functional, pressing force: 100 t, table width: 1,500 mm, table length: 2,300 mm, oil tank capacity: 330 l, total length: 4,400 mm, total width: 3,200 mm, total height: 4,350 mm, overall weight: 18,000 kg, year of last overhaul: 2025, number of cylinders: 5, Equipment: CE marking, documentation/manual, Hydraulic press JOOS HP S 100/OK – 100 t – Year of manufacture 2005 Manufacturer: Gottfried Joos Maschinenfabrik GmbH Model: HP S 100/OK Year of manufacture: 2005 CE compliant Technical data: • Pressing force: 1,000 kN / 100 t • Maximum hydraulic pressure: 300 bar • Cylinders: o 4 × single-acting, Ø 90 mm o 1 × double-acting, Ø 100 / 70 mm • Cylinder stroke: 1,200 mm Rcjdpfx Aozh Iwwsmyed • Pressing area: 2,300 × 1,500 mm • Press chamber opening: 2,100 mm • Dimensions (L × W × H): approx. 4,400 × 3,200 × 4,350 mm • Weight: approx. 18,000 kg • Hydraulic tank: 330 l • Hydraulic oil: ISO VG 46 • Sound power level: 88 dB(A) Condition: used, industrial machine Application areas: pressing, straightening, insert molding, joining, assembly Availability: upon agreement Loading/dismantling: possible upon agreement

Condition: good (used), Year of construction: 2021, machine/vehicle number: H 21-3743, Offer 26175 Technical data: - max. pressing force up to 25 t - max. ram stroke 160 mm - installation height without straightening unit 675 mm - overhang to the center of the ram 250 mm - table size approx. 1300 x 300 mm - working speed, roughing approx. up to max. 30 mm/s - working speed, finishing approx. 100 mm/s - oil capacity approx. 150 liters - drive 400 V / 10 kW - space requirement approx. W 4900 x H 2400 x D 1500 mm Rjdpfszh Edbjx Amyecd - weight approx. 3000 kg - including: - straightening table extension 2030 + 1520 mm - traversing carriage with mounts on the straightening table - pointed die holder - roller die holder - straightening ram - pivoting feeler gauge with dial indicator

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 Rodpozd Tf Sofx Amyecd • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. Rodpev E Nlzofx Amyscd New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.