Used Kilia 65 Liter Meister Plus Vario for sale (18,306)

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Nsdjzf Ibkjpfx Af Sjwl Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: white, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Nodpfsymi Eusx Af Sjwl A50 Front axle with increased load capacity, AR2 Axle ratio i = 3.923, B25 Electric parking brake, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CB7 Stabilization Level I, CK8 Steering wheel heating, CL1 Height and tilt adjustable steering wheel, CL3 Leather steering wheel, D03 High roof, D50 Full partition wall, E07 Hill start assist, E1D Digital radio (DAB), E1E Navigation, E1U USB socket 5 V, E30 Single-pole battery main switch, E43 13-pin trailer socket, E4S Smartphone integration package, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EE5 Ultracap Automatic transmission locking, ES0 Jump-start connection, ET4 Active distance assist DISTRONIC, F1K Coat hook in cab, F49 Heated windscreen, F64 Electrically folding exterior mirrors, F68 Heated and electrically adjustable exterior mirrors, F907 MODEL SERIES 907 VAN VS30, FF5 Overhead storage above windshield, FG8 Front cup holder, FJ4 Storage compartment under dashboard, FM3 WET WIPER SYSTEM, FZ5 Burglar and theft alarm system, G43 9G-TRONIC, H04 Driver’s compartment thermal insulation, H15 Passenger seat heating, H16 Driver seat heating, H21 Heat-insulating glass with band filter on windshield, HH2 Electric auxiliary air heater, HH9 SEMI-AUTOMATIC TEMPMATIC CLIMATE CONTROL, IR4 Wheelbase 3,665 mm, IT4 3.5 tons, J10 Speedometer km/h, J55 Passenger seatbelt warning system, J58 Driver seatbelt warning system, J65 Outside temperature display, JA7 Blind spot assist, JA8 Crosswind assist, JA9 Traffic sign assist, JB4 Active lane keeping assist, JB7 Parking package with reverse camera, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JI7 Start distance service interval 60,000 km, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 93-liter main fuel tank, L22 LED partial tail lights, L65 Roof lamp(s) loading/driver area with door contact, L94 Omission of parking lights, LA1 High beam assist, LA2 Driving light assist, LB1 Side marker lights, LB5 3rd brake light, LC2 LED light strip in cargo area, LC4 Comfort roof control unit, LE1 Adaptive brake light, LG7 LED High Performance headlamps, MJ8 ECO start-stop function, MT5 EMISSION CLASS EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) at 3800 rpm, P2F Active safety package, P2L Cargo area package 2, P3Z Winter package plus, Q11 Longitudinal member reinforcement, Q22 Fixed ball head trailer coupling, R65 Spare wheel holder under rear frame, R87 Spare wheel, RH2 Tires 235/65 R16 C, RM0 All-season tires, RY2 Wireless tire pressure monitoring, front & rear axles, S02 Driver’s seat, S22 Driver’s seat armrest, S23 Double passenger seat, SA5 Driver airbag, SA6 Passenger airbag, SH1 Thorax-pelvis sidebag driver, SH2 Thorax-pelvis sidebag passenger, SH9 Windowbags for driver and passenger, SK2 Driver seat occupancy detection, T16 Sliding door right, T75 Grab handle for driver and passenger entry, T77 Grab handle entry loading area sliding door at partition wall, T85 Entry grab handle on left rear pillar, T86 Entry grab handle on right rear pillar, V07 Rear wall trim, V42 Lashing rails on sidewall at belt line, V43 Wooden floor, V85 Smoker’s package, V94 Cable duct on sidewall, V95 Cable duct at rear portal, VA2 Load compartment trim up to roof height (wood), VF7 “Maturin” black fabric, W54 Rear doors,...

Condition: used, We offer a Kilia K4000 Express vacuum bowl cutter with a 325-litre bowl capacity. This is an industrial machine designed for intensive cutting, mixing and emulsifying of meat fillings in food processing plants. The cutter is equipped with 8 knives, a knife shaft cutting speed from 500 to 4400 rpm and a forward/reverse mixing function in the range of 50 – 500 rpm. Thanks to its high 90 kW power and solid construction, the machine is suitable for the production of sausages, frankfurters, pâtés, meat fillings, meat emulsions and other products requiring precise cutting and thorough mixing of ingredients. The Kilia K4000 Express is equipped with hydraulic cover control and is designed for vacuum processing. The vacuum pump and an additional set of knives are included in the set. This machine is suitable for food processing plants looking for a powerful industrial bowl cutter with a large working capacity and high production performance. Nsdozfkzaepfx Af Sowl Technical data: Manufacturer: Kilia Model: K4000 Express Type: vacuum bowl cutter Bowl capacity: 325 l Number of knives: 8 pcs Power: 90 kW Power supply: 400 V, 50 Hz Filling amount: up to 230 kg, depending on product Capacity: up to 1150 kg/h, depending on product Knife shaft speed – cutting: 500–4400 rpm Knife shaft speed – forward/reverse mixing: 50–500 rpm Bowl speed: 7–22 rpm Cover control: hydraulic Vacuum pump: included Knife set: included Weight: 5200 kg Overall dimensions: 3445 × 2815 × 1600 mm Main advantages: large 325-litre bowl capacity 90 kW power 8 working knives and spare knife set high cutting speed up to 4400 rpm forward and reverse mixing hydraulic cover control vacuum pump included solid industrial construction suitable for meat fillings, meat emulsions, sausages, frankfurters and pâtés high production capacity – up to 1150 kg/h, depending on product

Year of construction: 2021, condition: excellent (used), functionality: fully functional, IKA MHD 2000/10 powder wetting and dispersing machine, capacity 2500 liters/hour, solids capacity max. 1300 liters/hour, rotor speed 4200 rpm at 50 Hz, 18.5 kW motor suitable for frequency converter 20-60 Hz, product temperature max. 135°C, operating pressure -1 to +16 bar, operating pressure double jacket max. 2.5 bar, liquid inlet DN 25, solid inlet DN 65, outlet DN 50, product contact parts stainless steel AISI 316L or AISI 316Ti9, frame and lantern piece stainless steel AISI 304, weight approx. 400 kg, used in the production of plant-based proteins (pilot plant) Nwodpfxezu I Tfe Af Sol

Condition: excellent (used), RS-Simulators Temperature Shock System ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Device Data Manufacturer: RS-Simulators Type: ST2K 1000 / 55 Design: Temperature Shock System Cooling: water-cooled Description Used temperature shock system for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Application in industry, automotive, research, and quality assurance. System Description 2 separate temperature chambers (hot / cold) Automatic horizontal test basket transfer Fast changeover for temperature shock tests Temperature ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test chamber Volume: approx. 580 liters Internal (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current consumption: max. 65 A Media connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water requirement: max. 3.2 m³/h Cooling water return: unpressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions: External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight: approx. 2800 kg Equipment: Horizontal basket movement C-rails in the test chamber Large test basket (>1000 mm) Observation window Internal lighting Controller SE-604 Program operation and data logging RS232 interface Refrigeration system Refrigerant: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating data: Operating hours: approx. 4,500 hours Sound level: approx. 67 dB(A) Environmental conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rel. humidity Scope of supply: RS-Simulators Temperature Shock System ST2K 1000 / 55 Scope of supply as shown in the pictures Functional test Refrigerant service Leakage test Condition: Used. Condition: see pictures. Nwedpfx Afjy H Igfo Sjl Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please contact us.

Condition: used, Year of construction: 2004, Technical details: pressure capacity: 10 bar volume capacity: 1,1 / 0,95 m³/min. rotary speed of motor: 8500 U/min Number of working hours: 29.498 h weight: ca. 310 kg dimensions L x W x H: Kompressor: 1,5 x 0,7 x 1,5 m dimensions L x W x H: Kälte Trockner: 0,45 x 0,45 x 0,5 m On a steel structure, welded, the feet are stabilized with rubber feet, stand: Compressor: -15 bar working pressure -speed max. 8.500 rpm. -Cooling air 980 m³/h -volume flow at 7.5 bar = 1.1 m³/min. and at 10 bar = 0.95 m³/min. Refrigeration compressed air dryer type 406AP: -volume flow 65 m³/h -Cooling air demand 450 m³/h -refrigerant R 134a -compressed air perm. min./max.: 2 / 16 bar -pressure perm. refrigerant min./max.: 15 / 50 bar -2x connections with 3/4" and 1/4" each Compressed air tank Renner: -Tank size Ø 500 x 1.350mm -operating pressure max. 11 bar Njdpfx Ajz Dudajf Sewl -content for 250 liters -div. connections *

Condition: used, Year of construction: 2015, functionality: fully functional, Water chiller, brand Eurocold, 15 kW (13,072 frigorías), model ACW-MP120 AL SL D2, with 65-liter tank, refrigerant R-407C, consumption: 6.4 kW, water flow from 20 to 100 liters/minute. Dimensions: 755x790x1380 mm (height), weight 190 kg. Applications: plastics processing, air conditioning, automotive, pharmaceutical chemistry, food industry, laser, machine tools, wine production, etc. Unit inspected, fully charged with refrigerant, with warranty. Delivery across Spain and Europe. Shipping costs not included. Reference: 1149. Available stock: 30 units. Nwodpfx Aex Nf Npjf Sjl

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,200 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, For sale is a powerful and precise CNC lathe EMCO TURN 365 / E65, manufactured in 2007. The machine is equipped with a Siemens control system, powered tools on all 12 stations, a C-axis, a tailstock, and a matching EMCO COMPACT LOAD E65 short bar loader. The machine is in well-maintained condition and is ready for immediate use. Technical data: Manufacturer: EMCO MAIER Machine operating hours: 17,842 h Production operating hours: 3,369 h Model: EMCOTURN 365 / E65 Year of manufacture: 2007 Control system: SIEMENS Working area & travels: Travel X: 210 mm Travel Z: 610 mm C-axis: 360° (resolution 0.001°) Max. turning length (part length): 520 mm Max. turning diameter: ø 310 mm Diameter over bed: ø 600 mm Max. bar diameter: ø 65 mm Main spindle: Speed range: 60 – 4,200 min⁻¹ Drive power (100% / 60% ED): 15 / 18 kW Max. torque: 192 Nm Spindle connection: KK 6 (DIN 55026) Tool turret: Type: 12-position VDI 30 axial turret Nsdpoz Aknhsfx Af Sewl Powered tools: Yes, on all 12 stations (for milling & drilling) Accessories & equipment: Automation: Short bar loader EMCO COMPACT LOAD E65 Tailstock: Hydraulically operated (500 mm travel, MK4) Chip conveyor: Included Measuring arm: Tool setting measuring arm directly in the working area Part catcher, storage at chip conveyor Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying/selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, machine/vehicle number: 1391A, mileage: 6,678 km, power: 90 kW (122.37 HP), first registration: 05/1995, fuel type: gasoline, fuel consumption (urban): 14 l/100km, color: green, gearing type: automatic, emission class: euro1, Equipment: all wheel drive, central locking, trailer coupling, TUV and AU are made NEW and gets a green environmental badge :-) Special army version with long wheelbase, r Mercedes-G is in a super good condition, also the body is in a super condition!!!!(almost like new! ! ! unimaginable how the Swiss can do that), the top is super fast from the PKw with 8 seats to the pick-up with 2 seats to convert, the speedometer readings are from 1461km to 85429 (read off), there are about 10 G-models of this version in stock, the interior isL/W/H 1760/1520/1250, ready for immediate use, directly from the military very well maintained and serviced! ! !Equipped with: 2850mm wheelbase, automatic with 4 gears plus off-road reduction, four-wheel drive, a G has a Militar trailer hitch, the Tuv will not take you off for trailer operation, but on request with ball coupling 250,-? surcharge , 4-cylinder gasoline engine with 2299cm? cubic capacity, the fuel consumption on the highway is about 13 liters per 100km and on short trips just under 15 liters (this information I got from my customers), rear axle lock, (truck registration possible then only 2 seats in front), good tires 205R16, and much more. - We also have some accident vehicles in stock at favorable prices! - Ideal as a rally vehicle or hobby vehicle, also as a vehicle for hunting just great, to the G I also have the matching 1-axle off-road trailer with overrun brake on offer, - Several other all-wheel drive vehicles and other military vehicles are still available in my offer. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why do you want to Nwsdpfxoqx Sxho Af Sol

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs Nsdpjyyap Eofx Af Sowl • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: excellent (used), Year of construction: 2001, operating hours: 1,941 h, Equipment: cabin, FENDT 716 Tractor YEAR 2001 Nwodpfx Afsukq Nzo Sel 1941.8 mtg, VARIO BOX SUSPENDED CAB SUSPENDED FRONT AXLE WITH FRONT LINKAGE FRONT PTO HYDRAULIC AND PNEUMATIC BRAKING 4 REAR HYDRAULIC DISTRIBUTORS 1 FRONT DISTRIBUTOR WHEELS 540/65 R 38 AND 540/65 R 28 + NARROW WHEELS 900/95 R 46 AND 270/95 R 32

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: A50 front axle with increased load capacity, AR3 axle ratio i = 4.182, BA3 active brake assist, C6L multi-function steering wheel, CB7 stability level I, CL1 steering wheel adjustable in inclination and height, CN2 radiator grille frame in vehicle color, CT1 vibration damper, D03 high roof, D13 mounting rails for roof rack, D93 deletion of partition, E07 hill start assist, E1D digital radio (DAB), E1U USB socket 5 V, E43 trailer socket 13-pin, E4S smartphone integration package, E7B DIGITAL EXTRA: PRE-INSTALLATION FOR NAVIGATION, E7M MBUX multimedia system, ED4 fleece battery 12 V 92 Ah, ES0 jump start assistance, EW6 DIGITAL EXTRA: REMOTE SERVICES PLUS, EY5 Mercedes-Benz emergency call system, F61 interior mirror, F64 exterior mirrors electrically foldable, F68 exterior mirrors heated and electrically adjustable, FF5 storage compartment above windshield, FJ4 storage compartment under cockpit, FKA PANEL VAN, FR8 rear view camera, GD8 6-speed manual transmission ECO Gear 360, H12 warm water auxiliary heater, H21 heat-reflecting glass with band filter on windshield, HH2 hot air auxiliary heater electric, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IR4 wheelbase 3665 mm, IT4 3.5-ton vehicle, J10 speedometer km/h, J55 seatbelt warning system for passenger seat, J58 seatbelt warning system for driver seat, J65 outside temperature display, JA7 blind spot assist, JA8 crosswind assist, JB4 active lane keeping assist, JF1 rain sensor, JG0 gear shift indicator, JH3 communication module (LTE) for digital services, JI7 start-up mileage maintenance interval 60,000 km, JK5 instrument cluster with color display, JK8 driver camera, JS2 intelligent speed assist, JW8 ATTENTION ASSIST, K31 noise regulation according to ECE R51-03, KB7 main tank 93 liters, L65 ceiling light(s) LD-/FG-compartment with door contact switch, L94 deletion of parking light, LA2 headlight assist, LB1 side marker lights, LB5 3rd brake light, LE1 adaptive brake light, LX5 Europe, M60 generator 14 V / 250 A, M6B EMISSIONS CLASS EURO 6E-BIS N1, M72 vehicle compatible with HVO, MJ8 ECO start/stop function, MS1 cruise control, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, P4F rating country set Euro-NCAP, Q11 longitudinal member reinforcement, QA8 trailer coupling for increased trailer load 2.8 t/3.0 t, QA9 crossmember with integrated step, RD8 complete wheel arch cover, RH2 tires 235/65 R16 C, RM0 all-season tires, RS3 steel wheels 6.5 J x 16, RY2 tire pressure monitoring system on front and rear axle, wireless, RZ2 wheel manufacturer Magnetto Wheels, S02 driver seat, S04 adjustable passenger seat, S22 armrest for driver seat, S25 armrest for passenger seat, SA5 airbag driver, SA6 airbag passenger, SK2 seat occupancy recognition driver seat, T16 sliding door right, T74 grab handle for entry, T86 entry handle on rear corner pillar right, U22 pre-installation for seat configuration 3/-/-, U62 seat bench for passenger compartment 3-seater, 1st row, narrow, V40 floor group combination, V43 wooden floor, V85 smoker's package, V94 cable duct on side wall, V95 cable duct on rear portal, VA1 lining of cargo space up to top strap standard, VA7 storage compartment with net in rear doors, VF7 fabric Maturin black, W16 window front left, fixed in side wall/sliding door, W17 window front right, fixed in side wall/sliding door, W54 Nodezz E Hvepfx Af Sswl

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/2020, Equipment: ABS, FFB semi-trailer with silo, model EUT 60.3-4/4, for the transport of feed, approx. 60,000 liters volume, 4-chamber aluminum design. Rated for a trailer total weight of 34,000 kg: 10 tons saddle pressure, 24 tons axle load technically permissible, 13 tons saddle pressure, 27 tons axle load (3 x 9 tons). Unladen saddle height 1250 mm. Container design: Container with 4 chambers, approx. 8,000 / 19,000 / 17,000 / 16,000 liters volume. Pressure equalization via elongated holes in the partition walls. 4 material discharge cones with special FFB material discharge bowls, DN 800 / DN 1000. Fluidization via special fluidization valve, manufacturer OLI. Operating parameters: The pressure vessel complies with the EC Pressure Equipment Directive. Operating pressure 2 bar, test overpressure 3 bar. Wall thickness approx. 5 mm. Operating temperature -40 to 80°C. 5 manholes DN 450 with pivoting and folding dome covers. Material discharge: For each material discharge cone, a central material sump with a diameter of 200 mm. The sumps are equipped with bottom flaps DN 200 with an aluminum housing, steel plate and stainless steel shaft, NBR seal (white), which are operated laterally via remote controls. A 4" material collection line made of special steel is collected on the left side on the operating side in front of the axle unit. Chamber 1 and 2 collected in front of the axle unit and chamber 3 and 4 collected behind the axle unit. At the end of each material line, a 4" annular nozzle is installed for material acceleration. A 4" sight glass is installed behind each annular nozzle. Material discharge via one 4" TW coupling with a blank cover. Agitation nozzles in the sumps. Air piping: An aluminum air collection line is mounted on the left side on the operating side and runs to the rear with a Storz B coupling. Ladder and walkway: One stainless steel access ladder on the front and one on the rear, left side. Aluminum safety walkway on the left. Brake lock when the safety guardrail is raised. Chassis: The saddle plate is equipped with a tested 2" kingpin. Suspension: Axle unit, manufacturer SAF, type INTRADISC PLUS II INTEGRAL, 3 x 9 tons, disc brakes ø 430 mm. The air-sprung axle unit is mounted in FFB aluminum suspension. Axle spacing 2 x 1310 mm. First axle as a lift axle, controllable from the driver's cab, with starting aid. Third axle as a trailing steering axle, lockable via reverse gear and additionally via a switch on the control panel. Braking system: 2-sensor 2-module SLV ABS/EBS pneumatic braking system equipped with a spring-loaded parking brake on two axles. RSS - Rollover Stability Support. Air suspension system: Air-sprung suspension with automatic height adjustment. Lifting and lowering valve mounted laterally on a control panel in front of the first axle. Tires: 6 tires, size 385/65 R22.5, are installed. Rims: Forged aluminum rims, manufacturer Alcoa, type Dura Bright EVO, size 22.5 x 11.75. Offset: 120 mm. Wheel bolt holes: 26 mm. Wheel cover: Single-wheel plastic mudguards, black, attached with stainless steel brackets. Mud flaps mounted on the rear mudguards. Electrical system: 24-volt electrical system consisting of: - a 15-pole socket mounted in front of the saddle plate. - two multi-chamber lights integrated into the rear underrun protection. - yellow side marker lights. - outline lights at the rear. - license plate lights at the rear. - 4 work lights, 2 x left at the discharge (switched via parking lights and additionally via a sw Nedpfozr A R Hsx Af Sewl

Condition: used, Year of construction: 1998, Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side Selfholding/selfstopping crank attached light bar Color: red, original color is here for an additional painting Supports: 2 double supports rigid Base plates: 4 base plates with holes load/m: 50 kg Nwodpfx Afjqz Dt Rs Sel Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: fully functional, Year of construction: 1984, Equipment: documentation/manual, type plate available, Crank-driven plate shear Manufacturer: Fasti, Type: 507 – 20 - 3 Year of manufacture: 1984 Technical data Manufacturer: FASTI Type: 507 – 20 - 3 Year of manufacture: 1984 Sheet metal width: 2040 mm Sheet metal thickness: 3.00 mm Overhang on the stand: 100 mm Number of strokes: 65 Motor power: 7.5 kW Dimensions: L 2.65 x W 1.20 (plus 0.8 m support arms) x H 1.3 m Weight: 2.1 t Equipment - Rear stop, 500 mm, manually adjustable - Adjustable clamping pressure - Angle stop - Support arms - Manual adjustment of the cutting clearance!!! - 4 x spare blades (2 x top blades / 2 x bottom blades) - Documentation All information is subject to change without notice. Njdpjzpxdqefx Af Sewl A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2010, machine/vehicle number: 2067, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: AC, total height: 2,000 mm, total length: 1,500 mm, total width: 2,000 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, TARTLER NODOPUR VS-AR-2K – 2-Component Metering and Mixing System – Year of Manufacture 2010 – For sale is a used 2-component metering and mixing system, TARTLER NODOPUR VS-AR-2K. It was used in an industrial setting and shows corresponding signs of wear. Technical data: • Manufacturer: Ing. Büro Tartler GmbH / TARTLER • Type: NODOPUR VS-AR-2K Nodpfxezvmihs Af Sswl • Machine No.: 2067 • Year of Manufacture: 2010 • Operating Voltage: 400 V AC • Frequency / Current Consumption: 50 Hz / 20 A • Power according to nameplate: 6.5 kW • Operating Pressure according to nameplate: 6–8 • Dimensions: approx. 1,500 × 2,000 × 2,000 mm incl. refill system • Weight: approx. 750 kg, depending on the equipment Control / Drive • Siemens PLC / SIMATIC Panel MP377 • Frequency Inverter A/B: Lenze, 1.50 kW • Drive Motor A/B: 1.50 kW • Mixing Head Type: LC 6/3 • Electric Motor Mixing Head: Emod, 1.1 kW Metering Technology Component A • Metering Pump: KTS 32 • Delivery Volume: 32 cm³ / 30 ccm/stroke • Volumetric Meter: VSI 0.1/16 EPC S4V Component B • Metering Pump: FPN 16.0 • Delivery Volume: 16 cm³ / 16 ccm/stroke • Volumetric Meter: VSI 0.2/16 EPO 12 V Containers / Material Supply • 1 × Stainless Steel Container A, approx. 60 liters • 1 × Stainless Steel Container B, approx. 60 liters • Containers with Mini-/Maxi-Level Monitoring • Container Pre-Pressurization • Silica Gel Filter • Container Agitator • Automatic Refill from 200-Liter Containers • Diaphragm Pumps for Component A and B Hose Assembly • Component A: approx. 6.12 m / DN 16 • Component B: approx. 6.42 m / DN 10 Equipment: The equipment includes, among other things: • Metering and mixing system for two components • Mixing head • Siemens control panel • Metering pumps A and B • Volume flow measurement • Stainless steel material containers • Agitators • Automatic refill system • Diaphragm pumps • Hose package • Signal light / Traffic light • Control cabinet • Various sensors and pressure regulators Condition: The system is in used condition. Age- and use-related signs of wear as well as material residues are present. The optical condition can be clearly seen in the current photos. An inspection of the system is possible after prior appointment. A function test can also be carried out after consultation. Sale: Price: €17,500 (negotiable) plus VAT. Inspection and collection by appointment. Sale preferably to commercial businesses. If you are interested or have technical questions, we will be happy to send you further pictures and information.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Nwedpfx Afsz Aafvj Sol Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Nodsx Uq Uhjpfx Af Sowl

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,041 h, spindle speed (max.): 2,800 rpm, controller manufacturer: SIEMENS, controller model: SIEMENS 828D, number of axes: 2, This Romi C 510 was manufactured in 2014. It has a hollow spindle with a Ø 65 mm spindle passage, a wedge bar manual chuck Ø 260 mm, and hardened guide surfaces. The tool holder is a Multifix steel holder head B K22. The machine operates at a standard spindle speed range of 56–2800 rpm and has automatic lubrication and cycle functions for efficient operation. If you are looking for a high-quality lathe, consider the Romi C 510 that we have for sale. Contact us for more information. Additional equipment • Console: Automatic cycle in the longitudinal direction with activation of console recess. Machine Benefits Technical Machine Benefits • Automatic features: tool clamping, hardening of guide surfaces, switching of milling spindle speed, frame cycles, and lubrication of guide surfaces. • Special versions: fully equipped, manual speed control, reduced speed range, manual tightening, numeric indicator for foreign production, and climate-controlled version without a control system. • Guide surfaces: hardened and plated counter surfaces. • Climbing milling: automatic device included. • Automatic tool clamping Nsdex D I Iujpfx Af Sewl Extra Information Special Machine Versions: Raised milling headstock, automatic frame cycles, and compliance with foreign standards by agreement.Maschinenbeschreibung:CNC-Horizontal-Drehmaschine - ROMI C 510 V5.0 – SIEMENSStandardausführung:. Siemens-Steuerung 828D sl, mit 10,4” LCD-Farbmonitor. ASA A2-6" Spindelkopf, Drehmoment: max. 303 Nm bzw. ASA A2-8", max. Drehmoment 408Nm, mit 520mm Schwingdurchmesserüber Bett, 450 mm Schwingdurchmesser über Schlittenführung und 255mm Schwingdurchmesser über Planschlitten. Reitstock mit manueller Positionierung des Grundkörpers, mit manueller Betätigung der Pinole (stehende Zentrierspitze) MK-4. Eilgang längs/quer mit 10.000mm/min. Herausziehbarer Spänewanne. Elektroanlage lieferbar für folgende Spannungen/Frequenzen: 400VCA / 50-60Hz. Abgedichtete Arbeitsraumleuchte. ROMI RMMP manuelles Maschinenpaket, bestehend aus CNC gesteuertem Hauptschlitten mit zwei  elektronischen Handrädern für X- und Z-Achse, Joystick-Schaltern und der  bedienerfreundlichen Siemens Software "Manual Machine Plus". Adapterplatte Multifix K22 Type B mit Multifix Stahlhalterkopf B K22. Schleppeinrichtung für Reitstock. Automatische Schmierung mit Inline-Filter und Füllstandsensor. Kühlsystem, komplett mit Kühlmittelbehälter und Kühlmittelpumpe (10l/min,@7bar, 1,5kw/ 2cv). Kühlwasser Spritzpistole mit zusätzlicher Pumpe. Elektrischer Schaltschrank mit Kühlung über Zentrifugalgebläse und Überdruck. Spritzschutz, komplett, Schutztüre mit Sicherheitsfenster und Verriegelung durch elektrische Sicherheitsschalter. Schrauben und Muttern für Nivellierung. Schraubwerkzeugsatz für den Betrieb der Anlage. Vollständige Dokumentation für das ROMI-Produkt auf CD. Standardlackierung: Epoxidlack strukturiert Munsell-Blau 10B-3/4 und Epoxidlack strukturiert grau RAL 7035.

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Nsdpfxoz Ek R Ee Af Sjwl Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Machine unladen weight approx. 200 kg Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Nedpfx Ajxl Ta Sjf Sjwl Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 1,500 kg, # PILOUS ARG 500 plus S.A.F. The PILOUS ARG 500 plus S.A.F. is a heavy-duty horizontal band saw designed for the precise and efficient cutting of metal profiles, solid materials, pipes, and structural sections. The machine is suitable for industrial applications and offers adjustable blade speed, hydraulic clamping, and a robust construction for reliable long-term operation. ### Technical Specifications * Model: PILOUS ARG 500 plus S.A.F. * Blade dimensions: 6040 × 41 × 1.3 mm * Blade speed: 15–90 m/min * Main motor: 400 V, 50 Hz, 4 kW * Pump motor: 400 V, 50 Hz, 0.12 kW * Hydraulic motor: 400 V, 50 Hz, 0.55 kW * Working height of vice: 870 mm * Hydraulic system oil capacity: 26 l * Hydraulic oil: ISO 6743-4/HM, DIN 51524 Part 2-HLP * Coolant tank capacity: 35 l * Machine dimensions, minimum: 1410 × 2370 × 1580 mm Nwjdpfjzvhw Tex Af Ssl * Machine dimensions, maximum: 2000 × 2800 × 2150 mm * Machine weight: 1530 kg ### Cutting Capacity | Cutting angle | Round material | Square material | Rectangular material | | ----- | -----: | -----: | -----: | | 90° | Ø500 mm | 450 mm | 620 × 450 mm | | 45° | Ø500 mm | 440 mm | 440 × 450 mm | | +45° | Ø500 mm | 440 mm | 430 × 450 mm | | ±60° | Ø350 mm | 310 mm | 310 × 400 mm | The PILOUS ARG 500 plus S.A.F. combines high cutting capacity, variable blade speed, and hydraulic operation, making it a suitable solution for demanding industrial metal-cutting applications.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Beavertail rear, manual winch, aluminum floor Equipment: - Aluminum floor - Supports - Perforated metal floor Net: €6,462.19 / Gross: €7,690.00 Article number: MGP335852101.04 Technical data: • Brand: Martz • Model: GT PLUS 850/3 S 3.5T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 853 x 215 x 0 cm • External dimensions (LxWxH): 999 x 215 x 65 cm • Permissible total weight: 3,500 kg • Unladen weight: 980 kg • Payload: 2,520 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Steel lashing points, ideal for secure lashing • Centrally located between the lashing points: aluminum floor, continuous, non-slip and waterproof • with manual winch • incl. 250cm aluminum ramps, a pair instead of steel ramps • angled loading platform for a better loading angle • very lightweight trailer with a stable design • braked rubber spring axles from KNOTT • Shock absorbers mounted on the axles • Reverse assist • KNOTT overrun device and parking brake • very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear position lights mounted Nwsdpfx Aezy A Risf Ssl • Crankable telescopic rear supports, heavy-duty mounted • Support wheel mounted _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, mileage: 354,733 km, power: 105 kW (142.76 HP), first registration: 11/2020, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 87 Paint code: * 9147 Paint color arctic white Interior equipment: * VF7 fabric Maturin black Equipment: * A50 front axle with increased load capacity * BH2 Control code hydraulic unit variant 1 * BK2 Control code wheel brake configuration 2 * C6L Multifunction steering wheel * C910 * CB7 Stabilization level I * CL1 Steering wheel adjustable in tilt and height * D50 Full-length partition wall * E07 Hill start assist * E1D Digital radio (DAB) * E3M Mbux multimedia system with 7-inch touchscreen * E43 Trailer socket 13-pin * ED4 Non-woven battery 12 V 92 Ah * EE1 230 V socket * ES0 Jump-start contact * ES5 Instrument panel charging package * EW6 Remote Services Plus pre-installation * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F3F Passenger-optimized gearshift console * F68 Heated and electrically adjustable exterior mirrors * F910 * FF5 Storage compartment above windshield * FJ4 Storage compartment under cockpit * FKA Panel van * FM3 WET WIPER SYSTEM * GE9 6-speed manual gearbox * H15 Seat heating for front passenger * H16 Seat heating for driver * H1B Front tachograph control under headliner * H21 Heat-insulating glass all round with band filter on windscreen * HH9 Semi-automatically controlled Tempmatic air conditioning system * HI1 Climate zone 1 (cold/comfort) Nsdpfx Ajulrfaef Sjwl * IC1 C907/C910 Sprinter series * IF0 C910 VS30 Fwd series * IG4 Standard * IH6 Headunit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IS3 Wheelbase 3924 mm (BM-forming code) * IT4 3.5 tonner * J10 Speedometer km/h * J4V Pre-fitting intelligent tachograph EU * J55 Seat belt warning device for front passenger seat * J58 Seat belt warning device for driver's seat * J65 Outside temperature display * JA8 Crosswind assistant * JB7 Parking package with reversing camera * JF1 Rain sensor * JG0 Gearshift indicator * JH3 Communication module (LTE) for digital services * JI6 Starting distance maintenance interval 40,000 km * K1D Exhaust gas generation WLTP * KB8 Main tank 92 liters * KP6 Exhaust gas purification SCR Generation 3 * L Left-hand drive * L65 Load/passenger compartment ceiling light with door contact * LA2 Driving light assistant * LB1 Side marker lights * LB5 3rd brake light * LC2 LED light strip in load compartment * LE1 Adaptive brake light * LX5 Europe * M48 Generator 14V/230A * MI2 OM651 DE 22 LA engine 105 kW (143 hp) * MJ8 ECO start/stop function * ML7 Efficient Power Control (EPC) * MS1 Cruise control * MT2 Emission class Euro 6D-TEMP N1 * OH3 HU Freshup 3 * Q11 Side member reinforcement * Q22 Trailer coupling ball head fixed * QB1 Vehicle pre-equipment for trailer load up to 2000 kg * R65 Spare wheel holder under frame end * R87 Spare wheel * RF1 Continental tires (10) * RM0 All-season tires * RN5 Tires 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RZ2 Wheel manufacturer Magnetto Wheels * S22 Armrest for driver's seat, ISO-fix (child seat fastening system) * S23 Two-seater passenger seat * S94 GZE power supply * SA5 Airbag driver * SA6 Airbag front passenger * SB1 Driver's seat comfort * SE5 Lumbar support for driver's seat * SK2 Seat occupancy detection driver's seat * T16 Sliding door right * T77 Handle for access to load compartment sliding door on partition * T86 Access handle on rear corner pillar

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx. 1145 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with set spindle speed displayed digitally • Prism bed made of grey cast iron, induction-hardened and precision ground • Central, user-friendly controls for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing arrangement with precision angular contact ball bearings • Standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including those in the feed gearbox • Simple, smooth, and precise adjustment of speed and feed settings • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) Nsdpsxl Tarsfx Af Sjwl • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout system ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity dia. 135 mm • Travelling steady rest – max. capacity dia. 65 mm • Foot pedal with brake function, CE compliant • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Indexing stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard (rear) • Operating tools