Used Kellenberger 1500U Bema Economic for sale (781)

Condition: used, maximum load weight: 31,240 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 03/2027, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2023, Equipment: ABS, LANGENDORF/ FTS 3-Axle Aluminium Tipper "Combiliner" First registration 03/2023, single owner Mileage only 114,761 km The transport solution for intermodal haulage of both liquid and solid goods without conversion. The module can be removed at any time. System advantages: Avoids empty runs through swap operations. For seasonal transports, can be converted to a pure tipper for higher payload. Economical and ecological benefits. Module installed in the tailgate, tipper usable without restrictions. Rinse function. The vehicle complies with QS and GMP+ guidelines, certified by TÜV Süd. Unladen weight approx.: 7,760 kg Tipper volume 47.5 cbm Slurry bag volume 26.5 cbm Pneumatic vibrator Grain outlet in the floor, grain channel with dust protection sack Aluminium water tank 50 L with compressed air connection, hose reel, and shower head (as required by QS and GMP) SAF axles in reinforced "CD" version, with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with rollover stability support (RSS) WABCO Optiturn for reduced turning radius WABCO Smartboard with axle load display Six 385/65 R 22.5 tyres SPEEDLINE high-gloss aluminium rims FTS Combiliner module equipment: Fodpfx Aoy Iq Ineh Nsgc Vogelsang rotary lobe pump GL 186-184Q, weight-optimised Spade slide valves 4-inch and 6-inch Operation via remote control and programmable sequences Manual control unit on top for all hydraulic functions 2-tank venting/degassing and overflow Rinse function via two flange connections (left/right rinsing) Rinse baffles in the wire baskets Electric motor-driven winding reel with hydraulic brake RENTING is the new BUYING—immediately available from us, also as a FULL-SERVICE RENTAL-----

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Features and technical data: - Drill depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid feed system, eliminating the need for tedious cranking - Smooth and stepless movement of the drilling unit - Height adjustment with fine tuning and gas pressure cylinder for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drill depth adjustable using scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large, high-quality cast iron table with ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Drill head swivel range: -60° to +60° - Drill table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drill table height: 830 mm Fsdpexllwcjfx Ah Njgc Dimensions: 1,200 × 1,050 × 1,300 mm Weight: approx. 240 kg Availability: short-term Location: Flörsheim

Condition: new, power: 11.03 kW (15.00 HP), fuel type: diesel, color: yellow, overall weight: 950 kg, empty load weight: 950 kg, operation weight: 950 kg, maximum load weight: 950 kg, lifting power: 150 kg/m, lifting height: 2,610 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: additional headlights, adjustable chassis, GG900 KUBOTA D722 DIESEL Euro 5 incl articulated boom Mini excavator GG 900 - brand Günter Großmann The mini excavator GG 900 from Günter Grossmann is the perfect solution for anyone looking for an effective and economical tool for field work. Manufactured in 2024 - this machine stands out from the competition and at the same time offers the highest quality at the lowest price on the market. Noteworthy is the KUBOTA engine, which with a rated power of 15 hp at 3,600 rpm meets the Euro 5 standard and offers sufficient power for even more demanding work. This engine is known for its reliability and durability and guarantees long-term use. Model GG 900 Has an adjustable rail and a swiveling knuckle arm / frame / hinged arm, which makes working on a wall or fence much easier The Wanye hydraulic main pump and the hydraulic pressure of 16 MPa guarantee effectiveness in intensive work and ensure fast and precise movements of the bucket and other working equipment. In addition, both the rotary motor and the Dali traction motor ensure reliable operation of the machine. Fedovula Topfx Ah Nsgc We have all parts for our brand machines in stock in Europe (excl. VAT) (Including: Excavator GG900 + bucket 300 mm) kubota engine Articulated boom ) SPECIFICATIONS Model: GG900 Brand: Günter Grossman Engine: KUBOTA D722 DIESEL Euro 5 Cylinder 3 cylinders Power: 15 HP Working weight: 950 KG Bucket capacity: 0.025 cbm Bucket width: 300 mm Main pump: Wanye hydraulic Hydraulic pressure: 16Mpa - 160 Bar Rotation motor: Dali Travel motor: Dali The speed of driving: 1.5 km/h extra Articulated boom extra hydraulic connection with foot control DIMENSIONS Total dimensions (DxSxB): 2770x930x1490 mm Total track length: 1230 mm Track width: 200 mm Ground clearance chassis: 132 mm Track height: 320 mm WORKING RANGE Working area Max. digging depth: 1650 mm Max. digging height: 2610 mm Max. dumping quantity: 1850 mm Max. digging radius on the ground: 2890 mm Turning radius: 360° Max. Increase the height of the bulldozer blade: 345 mm Max. digging depth bulldozer blade: 255 mm

Condition: used, Year of construction: 1999, operating hours: 25,874 h, functionality: fully functional, machine/vehicle number: 1066, power: 30 kW (40.79 HP), final compaction pressure: 10 bar, Equipment: compressed air system, compressor, The Kaeser BS 51 lubricated compressor is a robust machine, ideal for numerous industrial applications requiring reliable and consistent compressed air. Capable of operating at a maximum pressure of 10 bar, it is equipped with a powerful 18.5 kW motor, ensuring optimal performance even under demanding conditions. This used model, while offering excellent performance, provides an economical solution for those seeking a more affordable alternative to new equipment. Designed by KAESER, a company renowned for its high-quality compressors, the BS 51 combines energy efficiency, durability, and low maintenance costs. Fgsdszb Izqepfx Ah Njc In summary, the Kaeser BS 51 compressor meets the needs of a wide range of industries. Its ability to maintain stable operation under high pressures makes it an essential tool for various applications.

Condition: used, Year of construction: 2003, Horizon VAC-100a VAC-100m SPF-20A FC-20A Booklet Making System, Used This Horizon booklet making system is a powerful solution for professional booklet production, combining collating, stitching, folding, and front trimming in an efficient process. It offers high productivity, versatile applications, and easy operation for efficient booklet production. Fodpfxsx D Urge Ah Nsgc Key Features: - Two collating towers: VAC-100a and VAC-100m with 10 stations each - Versatile stitching options: Saddle, corner, and side stitching possible - Touch & Work: Intuitive operation thanks to user-friendly technology - 9 programmable memory locations for repeat jobs - Precise error control: Prevention of miss-feed, double-feed, and jam problems - Expandable configuration: Possibility to add more VAC-100 towers Technical Specifications: - Paper format: max. 350 x 500 mm; min. 148 x 120 mm - Booklet format: max. 250 x 350 mm; min. 85 x 120 mm - Paper weight: 40-300 g/m² - Processing thickness: 2-22 sheets (80 g/m²) - Trimming thickness: 4-50 sheets (80 g/m²) - Front trim: max. 25 mm - Production speed: max. 3,600 booklets/h - Collating performance: up to 9,900 sets/h - Loading capacity per station: 55 mm - Power supply: 230V; 50/60Hz - Total power consumption: approx. 2.3 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Fgedpsya Az Nofx Ah Njc Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, total height: 2,750 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION : x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation Machine visible under power in our premises by appointment. Fgsdpfx Ahjya Dz Ro Njc Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: used, Year of construction: 2017, Horizon HOF-400, fully automatic feeder, used. This robust, fully automatic feeder was specially developed for the offline production of digitally printed booklets in conjunction with the SPF-200A, SPF-200L booklet making units, the StitchLiner 5500 and other optional additional devices. The sheets are removed sheet by sheet, checked, grouped and fed to the downstream unit in a block. Mark reading ensures reliable grouping and the production of brochures in different sizes. Special features: - Maximum flexibility at an extremely attractive price-performance ratio - Reliable paper feed thanks to suction belt feed - Extremely short set-up times thanks to fully automatic format adjustment - Extremely easy operation and set-up in seconds thanks to TOUCH&WORK technology - Economical processing of small and medium volumes in top quality Technical specifications: - Infeed format 4-sided sheets min. 203 x 203 mm, max. 610 x 356 mm (depending on downstream unit) - Paper thickness 50 - 160 g/sqm for normal paper / 70 - 160 g/sqm for coated paper - Loading capacity max. 620 mm - Speed A3 format max. 25,000 sheets/h - A4 format speed max. 35,000 sheets/h / max. 45,000 sheets/h (landscape) - Weight 782 kg (with front cutter FC-200A) - Machine dimensions 960 mm x 1,050 mm x 936 mm (LxWxH) Fgodpfx Ahsyzgamj Njc - Power supply 400 V 1.8 A, 1.0 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, specially designed for demanding machining tasks in tool and mold making. Thanks to its modern control system, excellent surface quality, and high efficiency, it offers an excellent investment opportunity for companies that value precision and cost-effectiveness. Key Features & Benefits: ✅ Large work area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Positioning accuracy thanks to linear glass scales (no recalibration required) Innovative ISPG (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark discharge and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM linking for seamless data transfer Job management with prioritization and Real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 48-station electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-construction with high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision mold and tool machining ✔ Series production with the highest quality requirements ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and economical die-sinking EDM! 📌 Our used machine, built in 2015, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability. Fgjdpfx Ahjw Ebtvs Nsc

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, The GF AgieCharmilles CUT 30P, built in 2011, is a powerful and precise used wire EDM machine specifically designed for demanding machining applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent control, the CUT 30P offers the highest cutting quality, low maintenance requirements, and an excellent return on investment. Main Features & Benefits: ✅ Large work area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Conical machining up to ± 25° / 80 mm ✅ High-precision machining: Positioning accuracy thanks to glass scales Automatic wire tensioning for consistently precise cutting results Surface quality up to Ra < 0.25 µm ✅ Efficient wire system: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and rethreading 25 kg wire spool for long operating times ✅ Intelligent control & user-friendliness: Windows-based control with intuitive user interface 15" LCD display for easy programming DXF import & 3D graphic check for precise simulations ✅ Reliability & low operating costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust construction and durable wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – The perfect choice for precise and economical wire EDM! 📌 Our used machine, built in 2011, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability. 📩 Contact us for a customized quote or demonstration! Fgedpfx Asv S Ua Djh Nsc We are also happy to offer commissioning and training on the machine.

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE Fgsdpfoh Eibaex Ah Njc The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE Fsdpfsw Rvu Dsx Ah Nsgc The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: like new (used), functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, laser type: fiber laser, laser power: 150,030,006,000 W, cutting speed: 110 mm/min, input voltage: 380 V, input frequency: 50 Hz, Economic & high-speed Integrated streamlined structure Stable transmission, low vibration Advanced high-precision laser head Eco-friendly design Suitable Industries: Small manufacturing workshops, metal art, HVAC, auto repair shops, small sheet metal job shops. Application Scenarios: Fodpfx Ahoza Rhwo Nogc Entry-level laser cutting; cost-effective small-batch production; multi-variety flexible processing; startup and small factory applications.

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, Finger Jointing Line WEINIG NKT Doppel-Pack DP20 An industrial finger jointing solution – engineered for maximum precision and efficiency Technical Specifications: - Infeed timber length: min. 130 mm | max. 1000 mm - Outfeed timber length: min. 3700 mm | max. 7400 mm - Timber cross-section: min. 20 x 40 mm | max. 80 x 180 mm - Cutter diameter: 370 mm - Finger profile: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch - Glue application: double-sided, PVAC white glue - Connected load: 80 kW Note: The machine is currently dismantled and in stock at our facility. Inspection is possible by appointment. Scope of supply: - WEINIG NKT Doppel-Pack DP20 incl. control unit - Integrated gluing station for double-sided application - Operating manual & documentation Hydromat 17B (7 Spindles) General Information Manufacturer: Weinig AG Model: Hydromat 17B // 7 Spindle (various tooling) Fjdpfx Ahozcrk Ee Nogc Type: High-performance profiling planer/moulder Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom, rigid table Description Heavy-duty high-performance planer and moulder made from vibration-dampening, warp-resistant cast components in a modular construction system. Designed for precise and economical wood processing with sustained high capacity. Mechanical feed, adjustable between 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table length 2 m, quick adjustment available. Cutting depth for surfacing and jointing spindles, each adjustable up to 10 mm. Technical Data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustable cutting depth: 10 mm (surface and jointing sides) • Machine version: No counter bearing, heavy-duty configuration

Condition: new, load capacity: 10,000 kg, Column lifting and rotating device with 10-ton load capacity, available as a set or individually. Driven on both sides. The machine is offered as a synchronized set or as individual units. Protec turning/positioning device Syncrolift. Fjdpfjwtq Dtjx Ah Njgc Double column, wireless and manual hand remote control. Column adjustment electrically drivable in both directions. Load capacity 10,000 kg, 360° rotation. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also available as a mono model (more economical). Optional with articulated flange (cardan flange).

Condition: used, Year of construction: 2015, functionality: fully functional, BAADER Soft Separator 601-505 – Year of Manufacture 2015 For sale is a BAADER Soft Separator, type 601-505, manufactured in 2015. The machine is in very good condition, almost like new, and has been used only sparingly. The separator is ideally suited for processing fish waste and gently extracting valuable soft components. The separation process allows for the economical further processing of raw materials and significantly increases the yield. Technical data: Manufacturer: BAADER Type: 601-505 Designation: Soft Separator Year of manufacture: 2015 Serial number: 120001835/10 Connection: 400 V / 50 Hz / 3 phases Motor power: 3.0 kW Current consumption: 7.2 A Fgedpfxezcn Tij Ah Noc Condition: Very good, almost like new Made in Germany Scope of supply: BAADER Soft Separator 601-505 1 drum with 3 mm perforations 1 drum with 6 mm perforations Application areas: Fish processing Processing of fish portions and waste materials Extraction of fish pulp for further processing Food industry The machine impresses with the well-known BAADER quality, a robust stainless steel design, and easy cleaning and maintenance.

Condition: excellent (used), functionality: fully functional, mileage: 525,000 km, power: 330 kW (448.67 HP), first registration: 02/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, onboard computer, parking heater, VIN 051 / C032 Mercedes Benz Actros 1845 LS 4x2 BigSpace Engine: Engine OM47, in-line 6-cylinder, 12.8 l, 330kW (449HP), 2200 Nm Increased power engine brake "Jake brake" 400 kW Gearbox: Mercedes PowerShift3 gearbox G 211-12/14.93-1.0 Mercedes PowerShift 3 automatic gear shifting system Power boost function when driving in 12th gear Predictive Powertrain control system Chassis: Front axle 7.5 t Driven rear axle, 13.0 t hypoid Axle differential lock Wheelbase (mm): 3700 Tires 315/70/R22.5 Tires - 1st axle: 50%, 2nd axle 65% tread remaining Aluminum first fuel tank 820 ltr+90 ltr AdBlue fuel tank Aluminum second fuel tank on the right, 480 ltr Economical driving program Cabin: BigSpace cabin 2 sleeping places Multifunctional steering wheel Radio receiver with USB port Automatic climate control system Autonomous heater “wet” 3.8 kW Additional cabin thermal insulation Preparation for “Fleetboard” equipment On Board diagnostics Preparation for TollCollect device Safety: Electronic braking system with ABS and ASR Fedpfx Ahsv E U Egj Njgc Cruise control system “Tempomat” Exterior: Fog lights Night service light behind the cabin Service, maintenance history; One owner - transport company; A well-maintained tractor, worked only in Europe; We will provide more information by phone.

Condition: ready for operation (used), functionality: fully functional, The PSV DRC130 grinder is an industrial grinder designed for meat processing plants, sausage-making laboratories, and food processing companies seeking equipment capable of handling large production volumes. Thanks to its Unger Ø130 cutting system, it ensures uniform grinding while maintaining excellent product quality. Designed for intensive use, the PSV DRC130 grinder is equipped with a robust gear motor that allows for continuous operation. Its design promotes a consistent feed of raw materials while ensuring production stability. Consequently, it increases output while minimizing interruptions related to maintenance or cleaning operations. Furthermore, its reverse function facilitates the unblocking of products and improves ease of use. In addition, the construction, entirely made of stainless steel, meets the high requirements of the food processing industry. At the same time, the quick disassembly of the working elements simplifies cleaning operations and reduces downtime. Moreover, its high production capacity allows the grinder to be effectively integrated into production lines for ground beef steaks, sausages, merguez, pâtés, or complex meat preparations. Finally, the PSV DRC130 grinder is a particularly efficient solution for professionals who want to combine productivity, robustness, and reliability. As a used, inspected unit, it also represents an economical alternative to purchasing new equipment while maintaining a high level of performance. Technical specifications: Brand: PSV Groupe Model: DRC130 Year: 2014 Serial number: DC1300007 Power: 5.2 kW Supply: 3~ 400 V Frequency: 50 Hz Cutting system: Unger Ø130 mm double cut Fgedjzcnd Uspfx Ah Nsc Theoretical flow rate: 1400 kg/h Construction: AISI 304 stainless steel Weight: 139 kg Dimensions (L × W × H): 1145 × 870 × 1290 mm

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Recycling shredder, wood shredder, chipper, shredder MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical yet powerful solution. The machines are manufactured and distributed directly from our factory in Germany. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Includes Ecoring - Robust construction - Larger feed opening - Excellent value for money Fgedpfx Ahszcna Ao Noc - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase power) - Siemens PLC controlled - MHR630 ecoline_Ecoring Rößler recycling shredder – “Made in Germany”

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 349029, overall weight: 2,010 kg, noise level: 69 dB, Equipment: type plate available, Voltage: 400V Phase: 3 Frequency: 50 Hz Flow rate: 14.72 m³/min Speed: 3000 min⁻¹ Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 7.5 bar g Full load current: 169 A The CompAir screw compressor L80-7.5A is a reliable and efficient solution for compressed air supply in various industrial applications. With its robust design and modern technology, this model ensures stable and continuous compressed air supply that meets the high requirements for performance and reliability. The compressor is characterized by its easy operation, low energy consumption, and minimal maintenance, making it an economical choice. Fedpfowrrn Djx Ah Njgc

Condition: good (used), functionality: fully functional, mileage: 13,790 km, power: 90 kW (122.37 HP), overall weight: 6,950 kg, fuel type: diesel, axle configuration: 2 axles, fuel consumption (combined): 10 l/100km, Year of construction: 1979, operating hours: 1,500 h, 1600 operating hours / total mileage 13,800 km! Fuel consumption approx. 10 l/100 km diesel. Front loader: Schmidt FL4 with quick-change bucket and pallet forks. It has spent almost its entire Unimog life stored indoors. Never driven in winter. Absolutely no rust on the underside. Fgedezcmx Rjpfx Ah Nsc Engine: OM 352, 6-cylinder, 5638 cc, 95 hp, economical – approx. 10 liters per 100 km, smooth-running with an authentic, sonorous sound. A true "one-off". This vehicle has accompanied all of my construction projects without any technical failures — now the work is finished. Selling as a collector’s item or for continued use. Includes workshop manual. I purchased the Unimog from the original owner, so I am only the second owner, for the past 14 years. First registered in November 1979. I have only driven it about 2,000 km. Transmission synchronizer rings should be replaced. Permitted gross vehicle weight (GVWR) = 6.95 t (can be driven with an "old Class 3 driver’s license"). This registration is completely tax-exempt! "Self-propelled working machine / excavator." Annual costs only about €250 for insurance plus MOT, no emissions test (ASU) required. The vehicle is currently registered and in use / operational with MOT, everything works! Due to the 43-year service life, especially soft parts and rubbers tend to become brittle and were replaced: - Clutch master cylinder - Shift cylinder (small to large gear group) - 4/2-way valve - Cylinder head gasket The clutch housing is perfectly dry.

Condition: as good as new (ex-display), Year of construction: 2026, The captivating advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Fgsdpjcnz Iqsfx Ah Noc Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. As a guide value, the cardboard labyrinth filter, depending on

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy Fgsdpfelht Htjx Ah Nec TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, The impressive advantages: Fgjdjdqc U Hspfx Ah Noc Space-saving compact design - comfortable and powerful. Excellent surface quality and a pleasant working environment due to diagonallow-turbulence air-stroemung. Large detection window thanks to air guide plates – thus also suitable for larger factory troughs. Separation degree of paint mist up to 99%, return ability of the pre-filter up to 18 kg/m2 - thus great filter life! Easy and fast filter change on the front. Cost-cost replacement filters. Low acquisition costs and low energy requirements. Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fiber filter as post-filter unit. Ex-fan incl. throttle valve attached to the left. Do not compromise on the quality of the surface. Suction-weighing Easy Paint are the ideal cost-effective application for the effective detection and filtering of the paint mist as well as the suction of the solvent dimempfe. Robust and powerful but economical in consumption. Thanks to the IPE double filtration system, two filter levels ensure a maximum separation degree of up to 99%. Thanks to the folded filter pockets, the cardboard labyrinth filter absorbs considerably more overspray (up to 18 kg/m2 filter area) than conventional filter mats. The downstream fiber glass fiber second-based filter absorbs only the finest residual particles. As a guideline, the cardboard labyrinth

Condition: new, Year of construction: 2026, Type and specifications The distinctive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working environment by diagonal low-turbulence airflow. Large capture window by air deflectors - suitable even for large workpieces. Separation of paint mist up to 99%, rear retaining capacity of the filter up to 18 kg / m ² - big filter booth time! Quick and easy filter change on the front page. Low-cost replacement filters. Low cost and extremely low energy consumption. Dry spraying wall of galvanized steel with welded base frame, cardboard labyrinth as a preliminary filter and glass fibre filter as a post filter unit. Grown ex fan incl. throttle links. Make no compromises in the quality of the surface. Suction walls easy paint are the ideal low-cost solution for the effective detection and filtering of paint mist, as well as extraction solvent vapours. Robust and powerful but economical in use. Standard suction power of easy paint 3500 model 600025 air performance on standard delivery * 3500 m ³/h filter surface primary 2,5 m² filtration area secondary 2.0 m ² power motor 400V/50 Hz * ex 1,1 kW Connection pipe suction pipe D 300 mm width in mm = 2750 overall height 1455 mm Depth in mm with capture window 855 weight in kg 145 Stando Fodpfx Ahob R D U Se Negc