Used Hp Jet Fusion 3D 4200 for sale (10,033)

Condition: good (used), Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool Knjdpfjhqf Rnex Ahgeb -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 kg

Condition: good (used), Year of construction: 2008, Raimann FlexiRip 4200 rip saw - German production, user manual - year of production 2008 - automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 600 mm Knsdpfxjhzg Ags Ahgjb cutting height max. 130 mm feed continuously adjustable up to 80 m / min main engine power 11 kW disc diameter max. / min. 600 mm / 400 mm 100 dimensions can be programmed line laser two-stage blade feed touch panel control stub diameter 2 x 160 mm dimensions of the machine (length / width / height) 620/160/220 cm weight 2250 kg

Condition: used, maximum load weight: 12,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2024, Krampe HP 20 Carrier Rear Tipper – Request Current Photos! Vehicle is currently on rental – We also have new vehicles in stock. * German vehicle * Hydraulic rear tailgate Kodpfx Ahjr Npnbogsnb * Hydraulic support leg * Folding underrun protection * Payload: 12,400 kg * Inspection (TÜV) until 2/2023 * Tyres may vary and do not have to match those shown in the photos * Tyres: 650/55 R26.5 Interim sale and errors expressly reserved! Sale exclusively according to our terms and conditions. Important Note – Important Information: Despite careful verification of all details in our offer, errors may occur. Some may result from transmission mistakes between the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). It is intended only as information to initiate a contract. The details provided here are without guarantee and do not represent warranted characteristics.

Condition: like new (used), Year of construction: 2016, For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) Knodpotp Up Eefx Ahgeb At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Model Type 8 HP VC 1200-325 Volume 9980l Kjdjufy S Hspfx Ahgonb Weight 2200kg

Condition: good (used), mileage: 29,000 km, power: 59 kW (80.22 HP), first registration: 04/2023, fuel type: diesel, fuel: diesel, color: light grey, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 2, Year of construction: 2023, Equipment: air conditioning, central locking, electric window regulation, navigation system, = Additional options and accessories = - Car kit - Front electric windows - Driver airbag - Air conditioning Knsdpfx Ajuxbnfohgsb - Radio/DAB/Bluetooth = Further information = Number of doors: 4 Cab: single Number of cylinders: 4 Engine displacement: 1,300 cc Interior: black Technical condition: good Optical condition: good Warranty: None

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit, Hammelmann HDP 402, housed in a WAB container. Similar to, but not a Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 402 PRESSURE STAGE 1: Operating pressure: 880 bar Flow rate: 242 l/min PRESSURE STAGE 2: Operating pressure: 1000 bar Ksdpfeipadxjx Ahgjnb Flow rate: 205 l/min Drive speed: 2100 rpm Plunger: d50 mm Drive power: 400 kW with a 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine with workshop and changing room. Dimensions L x W x H: approx. 7600 x 2450 mm Weight: approx. 9000 kg Year of manufacture: 2003 Operating hours: 7951 Condition: The high-pressure pump has been fitted with new valves. New batteries. In good used condition.

Year of construction: 2011, condition: used, Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -Content: ltr -Connection: 2 "inches Knjdpfx Ahed Duu Tjgeb -permissible operating pressure: 1.5 bar -centrifugal pump -Manufacturer: EBARA type DWC-V300/1.1 -Dimensions cabinet: 650/800/H1350 mm -Weight: 104 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 watts Control system: Siemens Sinumerik 840D Operating hours: 24 hours Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 optional) Max. dimensions of square profiles: 120x120 mm Max. dimensions of rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. profile weight: 37.5 kg/m Max. material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability accuracy: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H, C, U, L *Footprint L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on the equipment variant Standard equipment Control system Sinumerik 840D Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Kodsdx Nfwopfx Ahgonb Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for outputting analog values (power, speed, pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 watts (including cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: used, Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: 90° 12 mm -Drawing: in the photos -Length: 4200 mm (2 x 2100 mm) -Dimension: 20 x 75 mm -Weight: 44 kg Ksdofckflopfx Ahgenb

Year of construction: 2004, condition: good (used), machine/vehicle number: UP 20_LIND, Used Motoman HP20 Knodpfjfd Drrex Ahgob Type: HP 20 Controller: NX100 Year of manufacture: 2004.09 Payload: 20 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: FS0B000351, type of input current: AC, measuring range Z-axis: 3,000 mm, total width: 260 mm, total length: 310 mm, total height: 100 mm, overall weight: 5 kg, ambient temperature (max.): 40 °C, Equipment: documentation/manual, Technical Specifications: 3D Point Accuracy: ≤ 1.0mm Indoor Scanning Volume: Up to 8m³ IP Rating: IP52 Operating Temperature Range: 0 – 40°C Condition Details: Main Scanner and Laser: Impeccable condition Tablet, Calibration Board, and Accessories: Good condition with minor scratches Carrying Box: Displays wear but effectively protects the scanner Included in the Kit: Faro Freestyle-3D X Scanner Tablet Surface Pro 3 (Microsoft) Calibration certificate MicroSD Card and USB stick Calibration Plate Cleaning Kit Rugged Transport Case Company used scanner. Always kept in box after use. Knjdpfx Aheqxa Nijgob

Condition: good (used), functionality: fully functional, Year of construction: 2014, overall weight: 41 kg, Technical Specifications: Build Volume: 30.5 L x 30.5 W x 45.7 H cm [12.0 L x 12.0 W x 18.0 H in] Layer Resolution: 100 microns [0.0039 in] Filament Diameter: 1.75 mm [0.069 in] Print Chamber: Enclosed and heated build chamber Connectivity: USB, Ethernet, Wi-Fi Condition Details: Usage Details: Used for small parts and prototypes. Printer's extruded filament readings may show inaccuracies. Overall Condition: Expected wear from use, few scratches, and dust due to infrequent use. Well-maintained. Included in the Kit: MakerBot Replicator Z18 3D Printer On-board Camera for Print Monitoring Swappable MakerBot Smart Extruder+ MakerBot Large PLA Filament (Various Sizes) Intuitive Display, Dial, Assisted Leveling Knedjqy E N Sopfx Ahgjb Condition Note: Company-used printer, always stored in optimal conditions.

Condition: used, Year of construction: 2012, Electric motor, three-phase motor, brake motor -Manufacturer: Nord, electric motor with brake -Type: SK80S/4 3D BRE5 TF -Power: 0.55 kW -Speed: 1385 rpm -Brake: 5 Nm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 55 -Quantity: 1x engine available -Dimensions: 340/220/H160mm -Weight: 11 kg Knsdpfx Ajt Drkgehgsb

Condition: as good as new (ex-display), total pressing surface 2550 x 1350 mm total pressing force 900 KN (=80 MP) Ksde T R Nhopfx Ahgenb specific pressure force 2,6 daN/cm² (kp/cm²) 4 cylinder 80 mm diameter 400 mm stroke operating pressure 355 bar anodized heating platens, tooth rack guidance

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 240202088, total width: 1,300 mm, total length: 700 mm, total height: 2,550 mm, overall weight: 350 kg, water tank capacity: 120 l, noise level: 70 dB, input voltage: 400 V, water pressure: 200 bar, pump capacity: 14 l/min, working width: 1,100 mm, Equipment: type plate available, High-pressure washing booth (new installation), working area 1100mm x 650mm. Kodezlp Ifopfx Ahgenb Temperature range adjustable from 0-45°C. The system features a chip screen and filter. In the washing area, the system is equipped with a high-pressure lance and an air blow gun. Stainless steel AISI304, steam extraction, water level sensor.

Condition: used, mileage: 163,000 km, power: 96 kW (130.52 HP), first registration: 06/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,200 mm, loading space width: 2,143 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), The vehicle is from our own fleet, with a fully verifiable service history. Main equipments includes: Bluetooth, Multimedia system,Multifunction steering wheel, electric mirrors and windows etc. Please call us at WhatsUp/Viber also) E-mail: Knsdpfxszlv Sko Ahgjb

Condition: used, Hydropneumatic corner connection presses with support arms and new foot pedals Kjdpezrmcmsfx Ahgjnb Profile height max. 140 mm Stanzhöhe max. 93 mm Punching hub: 15 mm Presskraft 45 kN Weight approx. 280 kg

Condition: like new (used), fuel type: diesel, Year of construction: 2022, IVECO S-WAY 480, 2022 model, 4200 mm wheelbase, 570,000 km, automatic transmission, retarder, steerable and liftable third axle, body length from 6 to 6.60 m, tires with 70% tread remaining, navigation system, stationary air conditioning, double bed. On-site leasing options available. Kedezq R Hyepfx Ahgsnb

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Material used so far: Stainless steel 316L Latest service: January 2026 Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark Kjdpfxjzrfirj Ahgonb The machine can be inspected by appointment. The buyer is responsible for moving the machine.

Condition: good (used), Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Knodpfjy N Uq Aex Ahgob Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130

Condition: refurbished (used), Year of construction: 2016, operating hours: 3,660 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,500 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 682 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are comprehensively refurbished according to FEM-4.004 and current safety standards – ensuring maximum quality and safety for you. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after the purchase Test on site and get expert advice – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Order Picker ECE 220 HP Knodpfx Ajy Rpdaehgeb Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2016 Operating hours: 3,660 Lift height: 122 mm Mast type: None Free lift: No Initial lift: Yes Overall length: 2,550 mm Overall width: 800 mm Overall height: 1,500 mm Fork length: 1,150 mm Unladen weight: 682 kg Load centre: 600 mm Tyres: Polyurethane Model type: ECE 220 HP Battery type: PzS Voltage: 24 V Battery weight: 380 kg Charger: On request Cabin features: Elevating operator platform

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer an untested ProJet 3D printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Printing Modes: Knedpfezdnnuox Ahgob HD – High Definition UHD – Ultra High Definition Net Build Volume (xyz) HD Mode: 298 x 185 x 203 mm UHD Mode: 127 x 178 x 152 mm XHD Mode: n/a Resolution: HD Mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD Mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD Mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimension Accuracy depends on build parameters, part geometry, part placement, and post-processor settings. Email Notification: No Build Materials: VisiJet® EX200 Build Material: Durable solid material with a long service life VisiJet® SR200 Build Material: Cost-effective multipurpose material. Available in natural, blue, or gray VisiJet® HR200 Build Material: Available in blue, specifically developed for investment casting applications Support Material: VisiJet® S100 Support Material: Non-toxic wax material for melting away the supports without manual intervention Power Supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (LxWxH): Printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and machining optimization tools Extensive part file editing tools Automatic support generation Job statistics Network Compatibility: 10/100 Ethernet interface Hardware Requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating System: Windows XP Professional, Windows Vista, Windows 7 Supported File Formats: STL and SLC Ambient Temperature: 18-28 °C Noise Level

Condition: excellent (used), Stratasys 3D Printer Dimensio elite Here, we offer a Stratasys 3D printer, Dimensio elite. Stratasys 3D printer Dimensio elite The Dimension Elite 3D printer is part of Stratasys’ Design Series. The Dimension Elite printer is ideal for printing 3D prototypes and for modeling functional components, such as medical devices, mobile electronic devices, or precision instruments. With a simple click on “Print,” the CAD file is prepared, and the printing process is started. After easily removing the soluble support material, a precise and highly detailed component is revealed. Manufacturer: Stratasys Type: Professional operation Material(s): ABS Technology: Fused deposition modeling Assembly: Plug&Play Size: 686x914x1041 Weight (kg): 136 Nozzle opening (mm): - Layer thickness (µm): 178 Speed (mm/s): - Precision (µm): - Filament thickness (mm): - Maximum build volume (mm): 203x203x305 File format: .stl Software: CatalystEX Software Connections: Ethernet Operating system: Windows XP, Windows 7 Required power: 100 to 120 VAC, 60 Hz, at least 15 A on a dedicated circuit or 220 to 240 VAC, 50/60 Hz, at least 7 A on a dedicated circuit Type: Dimensio elite Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone. Knjdpfx Ahszdnprjgeb

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Knedpfx Aezcznyshgob Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Dimension : 110 x 103 x 150 cm Technical documentation available