Used Horizontal Bending Press T 800 for sale (85,140)

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK Fpsdegrkigopfx Akyon (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding. Fedpjz Ikz Asfx Akyspn

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Fsdpfxjx Ed H As Akyjpn

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes Fpjdjh Dy Rfopfx Akyon 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Fpedpsu Axfcjfx Akyjn Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, reverse speed: 18 mm/s, pressing force: 51 t, pressing speed: 18 mm/s, stroke length: 200 mm, table length: 500 mm, table width: 400 mm, Equipment: documentation/manual, Special Offer – 5% Discount Available! Hydraulic C-Frame Press The Hydraulic C-Frame Press is a professional industrial machine designed for precision pressing, bending, straightening, assembling and forming operations. Its open C-frame design provides excellent access to the working area, making it easy to handle larger workpieces and operate from multiple sides. The robust welded steel frame ensures outstanding rigidity, durability and reliable performance, while the hydraulic system provides smooth, accurate control of pressing force and ram movement. Suitable for continuous industrial use, this press is ideal for production facilities, maintenance departments and metalworking workshops. Main Features • High pressing force • Open C-frame design • Heavy-duty welded steel construction • Precise hydraulic control • Smooth ram movement • Easy access to the working area • Reliable industrial performance • CE certified Technical Specifications • Pressing force: 500 kN (approx. 51 t) • Maximum hydraulic pressure: 25 MPa • Maximum opening: 500 mm • Stroke: 200 mm • Table dimensions: 500 × 400 mm • Throat depth: 200 mm • Downward speed: 19 mm/s • Return speed: 18 mm/s • Motor power: 4 kW Applications Fpedpjyr D R Njfx Akyjn • Press fitting • Bending • Straightening • Assembly operations • Forming • Metalworking workshops • Automotive industry • Tool rooms • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: used, Year of construction: 2005, SECOND-HAND BENDING PRESS VECCHIATO MM. 2600X1300 - CE RULES - Opening mm. 1500 - N. 4 cylinders - Top bottom movement Fpjdpfx Akjwrzbaoyjn - Year 2005 - Safety nets - Manual and CE certificate

Condition: new, Year of construction: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, oil tank capacity: 200 l, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, CNC press brake 110 t × 3200 mm – MTP SPB 110/3200 with Delem DA-66S, 6+1 axes – NEW, IN STOCK New electro-hydraulic servo-synchronised CNC press brake with 1100 kN bending force and 3200 mm worktable, controlled by the Delem DA-66S 24" touch-screen CNC with 3D graphics. 6+1 CNC axes (Y1, Y2, X, R, Z1, Z2 + V crowning), servo main drive, laser safety guard. The machine is in stock in our warehouse and ready for immediate dispatch. KEY FEATURES • Delem DA-66S CNC: 24" full-touch colour screen, 3D graphics, automatic bend-sequence calculation, Profile-S2D offline software • 6+1 axes: Y1, Y2 (ram), X, R (back gauge depth/height), Z1, Z2 (finger positioning) + V (CNC crowning) • Electro-hydraulic servo synchronisation of Y1/Y2 with GIVI (Italy) linear scales on both sides, resolution 0.005 mm • ESTUN servo main motor – up to 60% energy saving, quiet operation • Rexroth hydraulic valve block and pump, NOK seals, EMB fittings Fpjdpez I S Drefx Akyjn • CNC motorised wedge crowning (V axis) – automatic deflection compensation along the full table length • Servo back gauge on Taiwan ball screws and double linear guides, 3-section adjustable stop fingers • Upper tool quick clamping (accuracy 0.02 mm), height-adjustable front sheet supports • Safety: DSP (Italy) laser guard, rear light curtain, KACON foot switch, Schneider electrics • Rigid frame verified by FEA, machined in one set-up on a CNC gantry machining centre TECHNICAL DATA • Nominal force: 1100 kN (110 t) • Worktable length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Max. opening height: 480 mm • Ram speed: rapid approach 180 mm/s, working 13 mm/s, return 170 mm/s • Ram repeatability: ±0.01 mm; positioning accuracy ±0.02 mm • Back gauge repeat positioning accuracy: ±0.02 mm • Workpiece straightness: 0.3 mm/m • Main motor: 8.5 kW servo • Dimensions (L × W × H): 3850 × 1650 × 2680 mm • Weight: approx. 7 t • Year of manufacture: 2026, CE marked STANDARD DELIVERY Press brake, levelling bolts, foot switch, operation manual, CNC manual, hydraulic and electrical schematics, foundation drawing, CE certificate. Condition: new. In stock – immediate dispatch. Terms: price net, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Documentation and manual included. Transport can be arranged to any European destination – delivery quote on contact.

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless Fpedpfx Aoxcuyhekyon - Clamping block with eccentric clamp - Material stop

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical specifications: - Maximum working length 1250 mm - Distance between uprights 1050 mm - Maximum pressing force 80 t - Stroke 250 mm - Distance from upright to center of slide 300 mm - Maximum installation height between table and press beam 560 mm - Stroke speeds - Downward speed, no load, max. 100 mm/sec - Upward speed 100 mm/sec - Downward pressing speed max. 12 mm/sec - Total drive power 15 kW - Space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - including: - CNC control CYBELEC DNC 7400 PSGY - Controlled X-axis rear stop 5 – 1000 mm - Z-axis with three-stage pneumatic height adjustment - Manually adjustable and foldable stop fingers - Controlled pneumatic die shifting Fodpfx Akob Rk Eksyepn - Hydraulic tool clamping - Manual crowning - 2 support arms - Point tool, split, H 320 x L 1000 mm - Deerfoot tool, H 320 mm x L 1000 mm - Universal die, L 1000 mm

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 Fpodpfx Aexcux Rjkyon - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 21900 € 420.48 € 80 to 285 mm 300x25 mm 750x1425 mm 300 mm 105 mm 10 mm/s 10 mm/s 10 kW 930 mm Fpsdjwiqrcepfx Akyjn 1430 mm 750 mm 1450 mm 1700 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Year of construction: 2024, operating hours: 32 h, condition: new, Manufacturer: DURMA Model: AD-S 30175 Year of manufacture: 2020* Bending length: 3050 mm Press force: 1750 kN Control system: DELEM DA-66T Operating hours: 32 h Controlled axes, back gauge: X, R, Z1, Z2, +Delta X +/- 125 mm, CNC-controlled Distance between uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range, X-axis: 650 mm Travel speed, X-axis: 500 mm/s Travel range, R-axis: 250 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1, Y2, X, R – X = 650 mm Control system: CNC Cybelec ModEva 19T – PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC-controlled motorized crowning European tool clamping system 60 mm die holder (for European die system only) Overhang 410 mm 2 front-adjustable support arms with T-slot and tilting stop Back gauge system: Siemens DC servo motor with linear guide and ball screw spindle Protective covers CE marking Fpedpfsdx Nluox Akyjn Additional equipment Safety system, CE standard for EU: FIESSLER AKAS-3P motorized + FPSC (SAFETY PLC) Controlled axes, back gauge: X, R, Z1, Z2, +Delta X +/- 125 mm, CNC-controlled Control system: DELEM DA-66T Hydraulic upper tool clamping system Wila NSCL-II-HC/UPB – PREMIUM – 250 t/m Hydraulic lower tool clamping system Wila NSCR-II-HC-CNC/UPB – PREMIUM – 300 t/m Power pack for hydraulic clamping AP3-AP4 bending aid - motorized height adjustment - max. load capacity 125 kg per piece Oil cooler This machine is manufactured according to customer requirements. Further machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: new, pressure 100 kN Fodpezr Rp Djfx Akyjpn stroke 0-200 mm table-size 450 x 1000 mm working speed: 6-10 mm/ sec. return speed 20 mm/sec work height max. 900 mm toolpiece height max. 200 mm total power requirement 1,5 kW bending capacity max. - round 42x3,2 mm 150x10 mm weight 320 kg dimensions 1010x480x1120 mm

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Length: 10 m Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included Fpedpfxextmzxj Akyon

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 602/02, center width: 4,000 mm, center height: 415 mm, spindle speed (max.): 1,600 rpm, controller model: Control System Euro Turn, TECHNICAL DETAILS Maximum turning height: 415 mm Fpsdpfx Ajz Ebbzekyjn Turning diameter over bed: 830 mm Turning diameter over slide: 540 mm Distance between centers: 4,000 mm Spindle bore: 130 mm Spindle speed: 2–1,600 rpm MACHINE DETAILS Control method: Teach-in Control system brand: Monforts Control system type: Control System Euro Turn Power: 55 kW Dimensions & Weight Dimensions (L x W x H): 6,750 x 2,100 x 2,020 mm Net weight: 7,500 kg Transport packages: 2 units EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 2001, functionality: fully functional, number of cylinders: 4, working width: 1,600 mm, SECOND-HAND BENDING PRESS ITALPRESSE MOD. PHF 60 - CE RULES - Platens dim. mm. 1600X1100 - N. 4 cylinders - Max opening 1000 - Motors max 1.5 kw - Volt. 380/50 Fpedox Rdkbjpfx Akyjn - Year 2001

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm Fsdpswiq N Iefx Akyjpn 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: used, Year of construction: 1998, machine/vehicle number: 106026, Horizontal stack delivery with pressing and marking device Heidelberg SBP 46.D + MKE.DYear 1998 - Serial-No. 106026/98-263536 Fpsdpsh Axhdsfx Akysn Sheet size min. (width × length) 120 × 100mm Sheet size max. (width × length) 460 × 300mm Product thickness max. 4mm Pile length 800mm Pressing force 8,000 N Infeed height 360-960mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, 300 kN stroke length max. 235 mm 200x24 mm bending capacity max. - round 60x4,0 mm Fjdpfoyv I Tdsx Akyspn toolpiece height max. 250 mm 660x1250 mm work height max. 900 mm return speed 20 mm/sec working feed 10 mm/sec total power requirement 3 kW weight 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm

Year of construction: 2015, condition: ready for operation (used), total width: 2,200 mm, total height: 3,500 mm, product length (max.): 3,000 mm, BVL's Niagara DFS 800-2T was manufactured in 2015. It features a useful length of 800 mm and a carrying capacity of 150 kg. The machine includes two tanks, each with a volume of 1,100 L, and operates at temperatures between 45 °C and 60 °C. If you are looking to get high-quality cleaning capabilities, consider the BVL Niagara DFS 800-2T machine we have for sale. Contact us for further details. Fodpez Ixwrefx Akyjpn - Useful Length: 800 mm- Useful Width: 635 mm (Max dimensions on nameplate: 800 x 600 x 400 mm)- Useful Height: 100 mm- Charging Height: 950 mm- Carrying Capacity / Charge: 150 kg- Charges / Hour: Approx. 2-4- Tank 1 (Waschtank) Volume: 1,100 L- Tank 1 Heating Power: 36.0 kW- Tank 1 Pump Capacity: 22.5 kW- Tank 1 Pump Pressure: 4.5 bar (13.0 bar max on nameplate)- Tank 2 (Spültank 1) Volume: 1,100 L- Tank 2 Heating Power: 30.0 kW- Tank 2 Pump Capacity: 3.0 kW- Tank 2 Pump Pressure: 2.5 bar- Dryer Fan Power: 2.2 kW- Dryer Heating Power: 30.0 kW- Rotary Drive Power: 0.18 kW- Operating Temperature: 45 °C min / 60 °C max- Cleaning Liquid pH Range: 5.5 min / 11 max- Water Connection: G 3/4- Raw Water Hardness: < 2.5 mmol/l (< 14 °dH)- Raw Water Conductivity: > 250 µS/cm- Compressed Air: Min. 6 bar (according to ISO 8573-1:2010 [5:4:3])- Total Dimensions (W x D x H): 2,200 x 3,000 x 3,500 mm- Operating Voltage: 3 x 400 V / N / PE / 50 Hz / 200 A

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,580 kg, input voltage: 400 V, total length: 1,600 mm, total width: 1,180 mm, total height: 2,310 mm, Special Offer – 5% Discount Available! 40T Open Back Eccentric Press The 40T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Fodpfoytdl Aox Akyjpn Main Features • Open back frame design • Heavy-duty steel construction • Fixed working table • Transversely mounted crankshaft • Dry pneumatic friction clutch • Adjustable slide stroke • Slide balancing device • Integrated safety valves • Manual controls • High productivity • CE certified Technical Specifications • Press force: 40 t • Stroke under nominal load: 6 mm • Slide stroke: 120 mm • Strokes: 55 strokes/min • Maximum die height: 220 mm • Die height adjustment: 80 mm • Throat depth: 260 mm • Working table: 710 × 480 mm • Table thickness: 80 mm • Table hole diameter: Ø180 mm • Bed opening: Ø200 × 150 × 300 mm • Slide surface: 320 × 270 mm • Maximum frame inclination: 25° • Distance between columns: 300 mm • Punch hole diameter: Ø50 mm • Punch hole depth: 70 mm • Motor power: 4 kW • Machine dimensions: 1600 × 1180 × 2310 mm • Machine weight: 3580 kg Standard Equipment • Light curtains • Mechanical safety guards • Lower table ejector • CE Declaration of Conformity • Technical documentation Applications • Punching • Stamping • Bending • Forming • Sheet metal production • Metal fabrication workshops • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: used, Year of construction: 2024, EMOD FHKFIE3 450L/6C Industrial Electric Motor – 800 kW Heavy-duty industrial electric motor suitable for variable speed/frequency converter applications. Technical specifications: Manufacturer: EMOD Type: FHKFIE3 450L/6C Motor No.: 8830664 Year: 2024 Rated power: 800 kW Fjdpfx Asz Dh Rmskyopn Rated voltage: 660 V Δ Rated frequency: 50 Hz Rated speed: 995 rpm Rated current: 850 A Power factor: cos φ 0.85 Efficiency class: IE3 Efficiency: 95.8% Protection class: IP55 Duty cycle: S1 Weight: 6,600 kg Standard: EN 60034 Temperature monitoring: PT100 Variable speed operation: 5 Hz – 99 rpm 50 Hz – 995 rpm 90 Hz – 1,790 rpm Frequency range: 5–90 Hz Equipped with a separate forced ventilation motor: EMOD FHEIE3 FOL100LA/4 3.0 kW 400 V 50 Hz 1,445 rpm IP55 The motor is industrial surplus and is offered in its present condition. Sold as-is, without warranty, and without the possibility of claims.

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 7300 € 140.89 € 10 to 185 mm 150x8 mm 450x900 mm 150 mm 60 mm 10 mm/s 10 mm/s 1.1 kW 915 mm 900 mm 450 mm 1130 mm 250 kg Fpjdpfx Aoynmzcskyjn Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: used, Year of construction: 1991, weight of the machine ca. 1,5 t ja Fsdpjx Ni E Iefx Akyjpn