Used High-Pressure Cleaner 500 Bar for sale (48,071)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 240202088, total width: 1,300 mm, total length: 700 mm, total height: 2,550 mm, overall weight: 350 kg, water tank capacity: 120 l, noise level: 70 dB, input voltage: 400 V, water pressure: 200 bar, pump capacity: 14 l/min, working width: 1,100 mm, Equipment: type plate available, High-pressure washing booth (new installation), working area 1100mm x 650mm. Temperature range adjustable from 0-45°C. The system features a chip screen and filter. In the washing area, the system is equipped with a high-pressure lance and an air blow gun. Hjdpfx Aezlp Ifogtent Stainless steel AISI304, steam extraction, water level sensor.

Condition: excellent (used), Hertz energy-saving boiler 50 kw Hjdpfx Ageq I Nfhjtjnt

Condition: used, Year of construction: 1998, operating pressure: 100 bar, overall weight: 590 kg, rotational speed (max.): 600 rpm, power: 30 kW (40.79 HP), URACA high-pressure pump unit Type: RS606E/100 URACA 3-plunger pump KD606 Flow rate: 138 l/min Hsdpfx Aev Hqpqegtjnt with 30 kW electric motor

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m Hnjdpfxezfqgis Agtst feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: good (used), Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge display up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm Hjdpjb A Ibdofx Agtjnt

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. Hnjdpfxsnp Iyws Agtot good working condition

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Hnjdpeygmhtsfx Agtst

Year of construction: 1977, condition: used, Name: High Pressure Pump Manufacturer: Abel Type: AK57/105 Year built: 1977 Material: mild steel Driving force: 55 kW Dimensions: L 2500 x W 1100 x H 1000mm Empty weight: 1200 kg Speed: 326 rpm Flow rate: 240 liters/min Operating pressure: 100 bar Operating voltage: 380/660 V Type of protection: 44 Flanges: DN 65 Condition: Used Message: Frequency range: 50 Hz, protection class: 44, flanges: DN 65 Price: on request Hnjdoh Unlkspfx Agtet

Year of construction: 1993, condition: used, Material: regular steel Driving force: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.5 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 1/min, stroke: 105mm Hnsdpsgb D Hijfx Agtjt

Condition: new, Year of construction: 2016, functionality: fully functional, pressure: 440 bar, operating pressure: 440 bar, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 66 kW (89.73 HP), year of last overhaul: 2026, pump capacity: 81 l/min, Equipment: type plate available, High-pressure plunger pump, Hammelmann HDP 72. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 72 Hnedpszgw Hxjfx Agtjt Operating pressure: 440 bar Flow rate: 81 l/min Drive speed: 1500 rpm Drive power: 66 kW Max. inlet temperature: 60°C Year of manufacture: 2016 Condition: Manufactured in 2016, but unused.

Condition: used, Year of construction: 2021, operating hours: 1,231 h, functionality: fully functional, total width: 720 mm, total length: 950 mm, total height: 800 mm, pressure: 500 bar, operating pressure: 450 bar, type of input current: three-phase, overall weight: 175 kg, high-pressure hose length: 20,000 mm, volume flow: 0.96 m³/h, empty load weight: 175 kg, input voltage: 400 V, hose length: 20,000 mm, High-pressure washer/sandblaster DENJET CE 20 COMPACT 500 - Pressure: 500 bar - Flow rate: 16 l/min - Power supply: 15 kW Hsdeyak Tyspfx Agtent - Voltage: 400 V - Current: 28 A - 20 m wear-resistant high-pressure hose with ½” BSPP female swivel couplings (extension hose). - 15 m oil-resistant 4-core electric cable. - Dry shut-off trigger gun with 0.85 m stainless steel lance. - Straight jet nozzle - CEE electric plug. - Rotating nozzle. - Sandblasting kit with boron carbide nozzle. - Mobile abrasive container. - Personal protective equipment: helmet with eye protection, waterproof coverall, protective apron rated for up to 1000 bar, protective boots size 43.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications. Hedow Icn Sopfx Agtjnt

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 56 kg, warranty duration: 24 months, input frequency: 400 Hz, SPECIFICATION: Model: KPC-5.5TP Voltage/Hz: 400/50 Pressure (Bar): 200 Flow Rate (L/h): 900 Power (W): 7200 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE Hedpfjw Ickasx Agtont CERAMIC PISTONS, DIAMETER 18 mm STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS EQUIPPED WITH PROFESSIONAL ACCESSORIES, INCLUDING 4 NOZZLES OF DIFFERENT SPRAY ANGLES TO HANDLE ANY TYPE OF DIRT AND SURFACE FEATURES A PRACTICAL HOLDER FOR ACCESSORY STORAGE AND A PROFESSIONAL BRAIDED HOSE Advantages of a crankshaft pump with ceramic pistons: - Precise operation and very high efficiency – these pumps are indispensable in environments where reliability over many hours of daily operation is crucial. - Minimal component wear – ceramic pistons are far more durable than steel ones, so they require less frequent servicing. - Resistance to chemicals and variable temperatures – they perform excellently even when working with aggressive chemicals and hot water. - Smoother operation – the pump runs more quietly and generates less vibration, improving operator comfort. Low-speed Motor – Professional design: - 1450 RPM ensures lower component wear and reduced noise emissions. - Designed for heavy-duty operations, ideal for tasks requiring continuous and extended use.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 120 bar, high-pressure hose length: 10,000 mm, pressure: 150 bar, empty load weight: 40 kg, warranty duration: 24 months, input frequency: 230 Hz, SPECIFICATION: Model: KPC-3.5P Code: K8.011.0051 Voltage/Hz: 230/50 Pressure (Bar): 120/150 max Flow Rate (L/h): 660 Power (W): 3000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH INTEGRATED BYPASS VALVE 18 mm CERAMIC PISTONS STAINLESS STEEL INLET AND OUTLET VALVES INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS STOP&GO FUNCTION EQUIPPED WITH PROFESSIONAL ACCESSORIES FEATURING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR REMOVING ALL TYPES OF CONTAMINANTS AND SURFACES INCLUDES A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL BRAIDED HOSE Hjdpfx Agow Iccijtjnt Why choose a crankshaft pump with ceramic pistons? - The crankshaft pump is a solution renowned in industrial applications. Its robust design ensures a significantly longer service life compared to more affordable washers equipped with axial or rotary pumps. - Ceramic pistons offer exceptional resistance to high temperatures and wear, providing reliable and quiet operation for years. - Thanks to this construction, the unit can be used in continuous operation mode without the risk of overheating or excessive component wear.

Condition: new, Year of construction: 2026, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Hnjdsu Hz Tqjpfx Agtjt Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Hjdoxqr D Tjpfx Agtsnt

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total width: 1,900 mm, total length: 3,720 mm, total height: 1,990 mm, pressure: 500 bar, operating pressure: 500 bar, fuel: diesel, overall weight: 1,800 kg, rotational speed (max.): 2,100 rpm, high-pressure hose length: 50,000 mm, water tank capacity: 300 l, empty load weight: 1,800 kg, temperature: 95 °C, fuel tank capacity: 100 l, type of cooling: water, hose length: 25,000 mm, power: 45 kW (61.18 HP), water pressure: 500 bar, pump capacity: 40 l/min, Equipment: type plate available, The HDT60, in its hot water trailer version, covers a pressure range of 400 to 500 bar with a flow rate of 33 to 40 l/min. The pump is driven by a water-cooled 4-cylinder turbo diesel engine. To ensure longevity and corrosion resistance, the frame inside the trailer, which is made of hot-dip galvanized steel, is one of the features. Additionally, the frame is primed and then painted, which creates a very attractive appearance. The frame can be easily pulled out for maintenance. The CD60, in its trailer version, can be configured with numerous options, such as a hot water boiler, an electrically operated hose reel, a remote control, etc. However, it is not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate HDT60-400 400 bar 40 lpm HDT60-500 500 bar 33 lpm General specifications: ----- Drive engine: Kioti turbo diesel 4-cylinder, water-cooled, Stage V (Tier 0 without AdBlue available on request) Power of drive engine: 45 kW Speed of drive engine: 2100 rpm Hnjdjhgbkuepfx Agtjt Fuel tank: 100 L Max. fuel consumption: 6.8 L/h Water tank: 300 L Burner output: 2x 105 kW Max. water temperature: 95°C Dimensions and dry weight: 3720 x 1900 x 1990 mm (1,800 kg) • Automatic pressure detection for easy start-up and operation. • Automatic idling for higher fuel savings. • Overpressure detection for increased safety and pump protection. Standard accessories included in the scope of supply of each machine: • 50 m high-pressure hose & 25 m low-pressure hose • HD gun with shut-off valve • Double lance with side handle • Nozzle holder with nozzle(s) • Telematics for remote monitoring. Remote monitoring via telematics. Optional accessories: • High-pressure hoses in special lengths • Special hose connections • Pneumatically operated pressure relief valve "Tumble Box". • Selection of various spray guns: manual, electric and hydraulic. • Surface cleaner • Spare parts kits • Wireless control and diagnostics with hand-held transmitter • Ethernet API for control and diagnostics. Alternatively available as a skid or/and cold water version.

Condition: used, operating hours: 638 h, High-pressure air/nitrogen compressor for sale – EFCO Maschinenbau GmbH BOE 100/200 booster. The compressor is used, fully operational. Currently connected – inspection and testing on site are possible. Designed for compressing air or nitrogen up to a pressure of 200 bar. Suitable for pressure testing, industrial processes, valve testing systems, and other high-pressure applications. Specifications: Model: EFCO BOE 100/200 Maximum working pressure: 200 bar Tank capacity: 2 x 50 l (100 l total) Electric drive – 400 VAC Suitable for air and nitrogen compression Automatic shutdown upon reaching maximum pressure Automatic start when pressure drops Simple and convenient operation Filling time from 0 to 200 bar (2900 psi): approx. 2.5 hours Operating hours: 638 h Hedpfx Aey R Nnrogtent German-made, professional, industrial-grade equipment. If you have further questions, we will be happy to answer them.

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages Hnodpfxoy Ra Dde Agtot - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 800 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, warranty duration: 12 months, type of input current: AC, input voltage: 230 V, compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, High-Precision Reference Measuring Center – Mahr OMS 800/500 HA Multisensor Coordinate Measuring Center with Extended Z-Axis Measuring Range Factory overhauled and modernized in 2025 – ready for immediate use. Technical Data Measuring range: 800 × 800 × 500 mm Sensors: - Optical sensor: Camera & laser (active measurement) Hodpoxbyxysfx Agtont - Renishaw TP200 touch probe (other options: TP20, SP25, etc.) - Camera system with 10x objective (optional: 1x, 5x, 20x) - 3D multisensor head MSH with transmitted light, incident light, laser & probe mount Software: OptiCheck3D 2025 – user-friendly, interactive programming Evaluation station: High-performance PC with Windows 11 Professional (64bit) Accuracy: - Length measurement uncertainty: E1 = 0.9 + L/600 µm - E3 = 1.9 + L/400 µm (L in mm) - Scale resolution: 0.1 µm Dimensions / Weight: - Size: 2360 × 1940 × 3300 mm - Weight: approx. 8090 kg - Max. workpiece weight: 50 kg (glass), 100 kg (granite), extendable - Traverse speed: max. 200 mm/s Device Details Model: Mahr MarVision OMS 800/500 HA CNC Design: High-precision, air-bearing multisensor measuring center Special feature: Active vibration damping (BILZ Bi Air) Condition: From laboratory use in precision measurement room, factory-refurbished in 2024 New price of comparable equipment: from approx. €650,000 Delivery time: approx. 4 weeks from order Highlights - Leasing option: 0% interest, without bank transaction - Factory overhaul 01/2024 with warranty & guarantee - Live demo: Available online or on-site - Optional service package: Worldwide transport, commissioning, calibration/certification, training, user instruction - 18 months free: Software update service & hotline support - Software: Full license OptiCheck3D (no subscription fees) - Remote service: Online board support directly at the measuring device - Custom modifications & retrofits on request - Latest 64-bit CNC controller & evaluation station (Windows 10/11) Supply & Environment - Compressed air: 6 bar ±0.1 bar (filtered, ISO 8573-1, consumption approx. 160 Nl/min) - Voltage: 115/230 V ±10%, 50/60 Hz ±5%, 2500 VA Environment: - Temperature: 20 °C ±1 K - Humidity: 40–70% RH - Vibrations: < 5 µm amplitude at < 5 Hz Service & Demo - Online demos available at short notice - Optional on-site demonstration at customer location

Condition: excellent (used), Compressor type: Dry air Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Number of cylinder lines 2/4 stages Supplied air: 7.73m³ / min; 464m³ / h Hnedjwcgc Repfx Agtst Motor power: 90kW

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, High pressure pump from PTV WJ3030B-1Z waterjet cutting machine. Pump, reducer, main motor of 37 kW, flush valve are overhauled. H2O Jet intensifier 60K 301001-1-R. Hsdpfx Asyxmmzogtsnt

Condition: good (used), LINCOLN high-pressure, self-cleaning extraction unit for laser cutting, welding, dust, and particulate matter removal. Cartridge-type filter element cleaned during operation by pulses of compressed air, ensuring high device efficiency. High-pressure turbine motor with a power of 5.5 kW and a vacuum of up to 17,650 PA!! Hnedpsg Th S Aofx Agtot Flow rate: 500 m³/h.

Condition: used, Year of construction: 1991, Type: WKF 50/12 N.SE Size: DN50 12 stages Standard version with mechanical seal Flow rate: 26.9 l/s (96.8 m³/h) Head: 380 m Hnjdpfx Aoy A Rbdogtot Speed: 2,960 rpm

Condition: used, High-pressure pump unit Hnjdpfoyt Nv Tox Agtet Type: 1502 35 High-pressure plunger pump of the 2 series Max. pressure: 228 bar Flow rate: 130 l/min Driven by ABB 55 kW electric motor