Used Haweka Quick-Release Nut for sale (6,684)

Condition: used, axle configuration: 2 axles, first registration: 03/2023, Equipment: ABS, Equipment: Sliding trailer 20 S * Dimensions and weights * External overall length approx. 7,055 mm * Overall width approx. 2,500 mm * Laden height approx. 1,150 mm * Roller track length approx. 6,890 mm * Wheelbase 5,240 mm * Unladen weight approx. 3,460 kg * Technically permissible total weight approx. 20,000 kg * Permissible total weight approx. 18,000 kg * Payload approx. 14,540 kg * Designed for containers with a length of 5,000 to 7,000 mm according to DIN 30722. * (Technical changes reserved.) * Chassis: * Chassis construction made of welded I-beams in QSTE steel * 4 container locking devices and upper sliding frame locking device, pneumatically operated * Side protection device according to RL 89/297/EWG, closed (position 2) * Bogie: * Bogie 980 FM including ball bearing turntable 90/1100/22 (low maintenance) * Drawbar: * Drawbar 2600/980/100/30, inclined drawbar pin * with height adjustment (coil spring with locking mechanism) * Drawbar with DIN drawbar pin, internal diameter D=40mm, external diameter D=110, thickness 30mm * Axles: * 2 x 10 t axles for 19.5 disc brakes, ET 138, manufacturer at manufacturer's choice. * Disc brake diameter approx. 370mm, * Wheel fastening by center centering according to DIN 74 361 Part 3. * Braking system: * Air brake system according to EU directive with interlock-proof * Duomatik coupling head * Conventional air suspension system, * EBS Type 4S/3M, electronic braking system with ROLL Stability, * Double-diaphragm spring accumulator cylinder on the rear axle, * Release valve for separate release of the spring accumulator brake. * Lighting system: * Lighting system 24 Volt, full LED according to RL 76/756/EWG with multi-chamber lamp * (Hella) and license plate lights integrated into the light panel * 1 x 15-pole plug connection * 6 LED side marker reflector lights * 2 LED outline lights, white, at the front * 2 LED position lights at the rear, separately mounted * 1 reversing light (position 3) * Tires: * Regional traffic tires, tire manufacturer at manufacturer's choice * 8-ply 265/70R19.5 (7.5x19.5) * Steel wheels ET 138, wheel nuts unpainted * Underrun protection: * TÜV-tested underrun protection made of aluminum. * Two vertical delta-shaped impact protection profiles serve to protect the rear during * loading and unloading. * Accessories: * 4 plastic fenders, half-shells at the front and rear, single-wheel fenders * 4 anti-spray mud flaps * 1 lockable plastic toolbox * 1 chock with holder * 1 license plate holder * 1 A-sign for the transport of waste materials * 1 net box (position 4) * 2 container guides * 3 small EBB stickers (position 5) * Painting: * Chassis color: MB 7350 Novagrau * Upper sliding frame: MB 7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 silver * Contouring marking at the rear: red * Contouring marking on the side: white * SSE: RAL 7001 Silbergrau (position 6) * Rear panel/light panels: RAL 7001 Silbergrau (position 6) * Underrun protection: aluminum-anodized (silver) * Locking hooks, container guides: yellow * Documentation: * Included in the scope of delivery: * Commissioning and brake test report * Operating instructions * Maintenance instructions from axle manufacturer * Spare wheel holder removed Ljdpfx Aboy Trycszohl All information without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Lhodpozzbafjfx Abzsl Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Condition: used, This listing is for a Sartorius BP 2100 S Balance with Printer. The unit is in full working condition and is ready for immediate release. The Sartorius BP 2100 S Analytical Balance is expertly designed for precision weighing applications, making it an essential tool for laboratories, quality control, and research settings. Its large top-loading design ensures easy placement and removal of samples, while its advanced features provide reliable and accurate measurements for various scientific needs. With a maximum capacity of 2100 grams and a readability of 0.01 grams, this analytical balance meets the rigorous demands of precise weighing. Ljdpfxexx Adgj Abzohl Key Features: High Precision Weighing: With a maximum capacity of 2100 grams and a readability of 0.01 grams, the BP 2100 S delivers exceptional accuracy, making it suitable for a wide range of applications. User-Friendly Top-Loading Design: The balance features a spacious top-loading design that allows for quick and easy access, streamlining sample handling and improving workflow efficiency. Built-In Printer: The integrated printer enables users to conveniently print weight measurements and other important data directly from the balance, simplifying record-keeping and enhancing data management. Versatile Applications: Ideal for laboratory environments, quality control, and research applications, the BP 2100 S is versatile enough to meet the needs of various industries. Robust Construction: Built with high-quality materials, this balance ensures durability and longevity, making it a reliable choice for everyday use in demanding settings. Easy Calibration: The balance offers straightforward calibration procedures, ensuring ongoing accuracy and performance. Key Specifications: Model: Sartorius BP 2100 S Maximum Capacity: 2100 grams Readability: 0.01 grams Design: Top-loading for easy sample access Printer: Built-in for direct printing of weight measurements and data Applications: Laboratory analysis, quality control, research settings Power Supply: Mains powered for consistent performance

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Lhedpor Hr Arefx Abzsl Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: ready for operation (used), Year of construction: 2024, pressing force: 64 t, CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details. • Inspection possible: Yes, in Bulgaria • CNC control • Control system: E-Touch ET18 (E-Touch 18) • Programming: 2D graphical programming, CAD import, offline programming • Remote assistance: Yes • Automatic bending-process calculation: Yes • CNC axes: 4+1 (Y1, Y2, X, R + V motorized crowning) • Main technical specifications • Distance between columns: 1,980 mm • Throat depth: 300 mm • Ram stroke: 160 mm • Maximum open height: 370 mm • Repositioning accuracy: ±0.05 mm • Fast approach speed: 200 mm/s • Bending speed: 10 mm/s • Return speed: 180 mm/s • Main motor power: 7.5 kW Ledpfx Aezu Swnobzshl • Axes / backgauge • Y1/Y2: Fully synchronized • X-axis: CNC controlled • R-axis: CNC controlled • V-axis: CNC motorized crowning • Backgauge: Servo controlled • Main components • Hydraulic system: Bosch Rexroth • Main motor: Siemens • Electrical components: Schneider Electric • Ball screws / linear guides: HIWIN • Linear scales: GIVI (Italy) • Tubing / connectors: EMB (Germany) • Sealing rings: NOK (Japan) • Hydraulic pump: Sunny (USA) • Safety and compliance • Motor overload protection • Electrical leakage protection • CE safety standard Additional equipment • 1 set upper punch (heat-treated 42CrMo) • 1 multi-V lower die (heat-treated 42CrMo) • Quick-release upper tool clamps • 2 front support arms • Foot pedal with emergency stop • Safety fence Technical Specification Bending Length 2500 mm

Condition: good (used), Welding rotary table KT 500, with 100 mm through-hole Load capacity, horizontal: 500 kg, tilted: 250 kg Power supply: AC 380 V, 50 Hz Lhodob U Havopfx Abzjl Rotary motor: AC 400 W Table diameter: 700 mm Height: 700 mm, width: 800 mm, length: 800 mm Weight: 155 kg Tilting range, continuously adjustable electrically: 0 – 90° Speed: 0.3 – 2.5 rpm Welding current transmission, max.: 500 A Includes: hand-held remote control, foot-operated remote control Optional extra: Quick-release chuck Diameter: 400 mm, €530 CE marking/approval

Condition: used, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2025, Equipment: ABS, Dimensions and Weights External length approx. 7,055 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,285 mm Rollway length approx. 6,890 mm Wheelbase 5,240 mm Complete empty weight approx. 3,400 kg Gross weight approx. 18,000 kg Payload approx. 14,600 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis construction made of welded I-beams in QSTE steel. 4 container locks and top slide lock are pneumatically operated. Side guards closed according to Directive 89/297/EEC. (Item 2) Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40 mm, outer diameter 110 mm, thickness 30 mm. Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 430 mm, Wheel mounting by centering according to DIN 74 361 Part 3. Braking system Air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system according to Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice. 1 x 15-pin connector 6 x LED side marker reflectors with flashing indicators 2 x white LED front marker lights 2 x separately mounted LED rear lane departure lights 1 x LED reversing light Wheels/Tires Regional transport tires: 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders Ledpfx Abjvzdw Dozjhl 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box 2 container guides Paintwork Chassis color: MB 7350 Nova Gray Sliding attachment: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook, container guide: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions DEKRA Expert opinion Side guard closed Hanging net box, galvanized All information is provided without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: used, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2025, Equipment: ABS, Dimensions and Weights External length approx. 7,055 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,285 mm Rollway length approx. 6,890 mm Wheelbase 5,240 mm Complete empty weight approx. 3,400 kg Gross weight approx. 18,000 kg Payload approx. 14,600 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis construction made of welded I-beams in QSTE steel. 4 container locks and top slide lock are pneumatically operated. Side guards closed according to Directive 89/297/EEC. (Item 2) Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40 mm, outer diameter 110 mm, thickness 30 mm. Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 430 mm, Wheel mounting by centering according to DIN 74 361 Part 3. Braking system Air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system according to Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice. 1 x 15-pin connector 6 x LED side marker reflectors with flashing indicators 2 x white LED front marker lights 2 x separately mounted LED rear lane departure lights 1 x LED reversing light Wheels/Tires Regional transport tires: 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box 2 container guides Paintwork Chassis color: MB 7350 Nova Gray Sliding attachment: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook, container guide: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions DEKRA Expert opinion Lsdpfjvzdwwjx Abzjhl Side guard closed Hanging net box, galvanized All information is provided without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Ledpjwgwmnsfx Abzjhl Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: used, This listing is for a Agilent Cary 100 UV-Vis spectrophotometer. The unit is in full working condition and is ready for immediate release. The Unit is supplied with a Agilent PCB 1500 Water Peltier System. The Agilent Cary 100 UV-Vis Spectrophotometer is a highly versatile and cost-effective instrument designed for a broad range of laboratory applications, making it an excellent choice for routine research in various fields such as chemistry, biochemistry, and materials science. Key Features: Double Beam Design: This design enhances accuracy and precision by allowing simultaneous measurement of the sample and reference, mitigating the impact of fluctuations in the light source. Wavelength Range: The instrument operates over a wide wavelength range of 190 to 900 nm, making it suitable for diverse applications, including those that require measurements in the UV and visible spectrum. Variable Spectral Bandwidth: The spectral bandwidth can be adjusted as low as 0.2 nm with variable slits, enabling users to optimize data resolution for specific experiments and applications. High Scanning Speed: With a scanning speed of up to 3000 nm/min, the Cary 100 provides quick data acquisition, enhancing efficiency during experimentation. Superior Photometric Stability: The optical design ensures robust photometric stability, resulting in consistent measurements over time, which is crucial for reproducibility in scientific research. Signal-to-Noise Optimizations: The special signal-to-noise reading mode allows for customizable control over measurement precision, enabling reduced scanning times in high-energy regions and improved averaging in lower throughput conditions. Flexible Operating Modes: Users have the flexibility to operate the spectrophotometer in single, double, or dual single beam modes, adapting the functionality to different experimental needs. Modular Software Control: The Cary WinUV software, which is Windows-based and modular in design, allows users to customize their experience with capabilities like advanced data processing, automatic peak labelling, and enhanced reporting and file transfer options. Accessories and Sample Holders: The instrument can be fitted with a wide range of accessories to extend its capabilities, and it comes shipped with liquid sample holders for immediate use. Benefits: Robust and User-Friendly: The quartz-coated optics not only ensure durability and easy cleaning but also protect against corrosive environments, thereby extending the lifespan of the instrument. Cost-Effective: Designed for routine laboratory work, the Cary 100 provides reliable performance without incurring high costs, making it an economical choice for laboratories. Tailored Experience: The software's modularity allows users to customize their operations and processing tools to fit specific requirements, enhancing productivity and workflow. Versatile Applications: With applications spanning materials testing, petrochemicals, and biotech/pharma studies, this spectrophotometer is a valuable addition to any research setting. The PCB 1500 Water Peltier System is an efficient and precise circulating water bath designed for temperature-sensitive applications in laboratories. Utilizing Peltier technology, this system is ideal for maintaining controlled temperatures for various experiments, particularly in conjunction with thermostatted cell holders. Key Features: Lhjdpfjxxz Scox Abzjl Precision Temperature Control: Offers a temperature control pr...

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Ljdpfjxu Ewzjx Abzehl Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, Lhodpfx Abox S Hmzszel HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: new, functionality: fully functional, fuel type: diesel, empty load weight: 900 kg, maximum load weight: 250 kg, Year of construction: 2026, New loader. SDLOOL 36C. Year 2026. Own weight approx. 900 kg. Lifting capacity approx. 250 kg. Lifting height approx. 180 cm, breakout height approx. 170 cm. Overall height approx. 140 cm. Working width approx. 98 cm. 1-cylinder diesel engine. Hydraulic oil cooler. Additional hydraulic connections available. Mechanical quick-release coupling. Only the bucket shown in the photo is available. Lhsdpfxezz A Sio Abzsl Video, photos, and information also available via WhatsApp. Price net + 21% VAT or net export with VAT number. We speak Dutch. Wir sprechen Deutsch. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (NL) in as-is condition!

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM340 230V woodworking dust extractor with a dust filter is a high-performance extraction unit designed for woodworking shops and facilities that require effective removal of sawdust, wood chips and fine dust. Thanks to its single-phase operation and compact design, the unit is ideal as a mobile sawdust extractor for multiple workstations. Main Advantages High extraction capacity – 3,200 m³/h – efficient handling of machines generating large amounts of waste material. 2-micron dust filter – effective air filtration, including fine dust particles. 300 mm diameter metal impeller – stable, vibration-free operation. Lhsdpfx Abjz A Tkpozol 180° rotating extraction unit – flexible adaptation to the layout of the extraction hoses. Quick-release mounting system – convenient and fast replacement of filter and waste bags. Mobility – transport wheels and relatively low weight make it easy to reposition the extraction unit. Construction and Technology The FM340 230V is equipped with a robust metal fan enclosed in a durable housing, ensuring consistent negative pressure while maintaining stable extraction performance. The high-quality dust filter, with filtration efficiency down to 2 microns, allows the unit to be used even for sanding and processing dust-generating materials. The extraction unit can be rotated by 180°, making it easier to connect three workstations to the 3 × Ø100 mm outlets. Thanks to its 230 V power supply, the sawdust extractor can be connected in virtually any workshop without the need for a three-phase electrical installation. Precision and Operating Efficiency The 1.5 kW motor reaches a rotational speed of 2,850 rpm, resulting in highly effective collection of wood chips and fine dust particles. The large 190-litre collection bag allows for extended operation without the need for frequent emptying. Applications Woodworking: planers, jointers, thickness planers, saws and sanders Woodworking shops, furniture manufacturing facilities and craft workshops As a sawdust blower or dust extraction unit in smaller production lines Standard Equipment Waste collection bag Self-cleaning dust filter (2 microns) Suction inlet 1 × Ø150 mm / 3 × Ø100 mm Metal mobile base with wheels Optional Equipment Ø100 mm extraction hose Galvanized hose clamps Technical Data Motor 1.5 kW / 230 V Rotational speed 2,850 rpm Extraction capacity 3,200 m³/h Negative pressure 1,900 Pa Noise level 70 dB Bag capacity 190 L (500 mm / 1,100 mm) Outlet diameter Ø150 mm / 3 × Ø100 mm Impeller diameter 300 mm Dimensions (L × W × H) 985 × 560 × 2,210 mm Weight 45 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 118950, high-pressure hose length: 15,000 mm, pressure: 150 bar, input voltage: 230 V, The Kärcher HD5/15 CX Plus + FR Classic (surface cleaner) cold water high-pressure cleaner is an exhibition piece in like-new condition. This compact, lightweight, and versatile cold water high-pressure washer HD 5/15 CX Plus + FR Classic stands out for its excellent mobility and is suitable for both upright and horizontal operations. The unit features sophisticated accessory storage and, thanks to its brass cylinder head and automatic pressure relief, promises a long service life. At the same time, it impresses with innovative developments that sustainably enhance user comfort by enabling fatigue-free work and time-saving setup and dismantling. The EASY!Force high-pressure gun utilizes the recoil force of the high-pressure jet, reducing the holding force to zero, while the EASY!Lock quick-release fasteners allow for handling that is five times faster than conventional screw fittings without sacrificing robustness and durability. An all-around well-thought-out equipment package for outstanding cleaning results, offering high comfort and long service life. Lhjdpfjyzpdusx Abzol Technical Data: Voltage: 230V Power consumption: 2.8 kW Operating pressure: 150 bar Connection cable: 5 meters

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X Lhedpfx Aox Twccebzol * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Condition: new, Year of construction: 2021, Marel MS2610 Pinbone Remover High-quality pinboning The MS 2610 Pinbone Remover is a lighter version of our well-known standard pinboner, the MS 2612. It is designed according to the same principles, ensuring high-quality pinbone removal, and it can operate at the same speed as the MS 2612 to deliver maximum capacity. Manual adjustments Lodpfxjz Arims Abzshl Three pre-set speeds are available, allowing the pinbone roller to adapt to the varying condition of the fish. The pressure of the pinbone heads can be easily adjusted using a weight bar. The MS 2610 is available as a single-lane and dual-lane machine. Fast and accurate The MS 2610’s unique combination of accuracy and speed results in high yield and output, with the best pinboning quality often achieved at a belt speed of 4-5 m/min. Up to 18 fillets per minute, per lane Three pre-set speeds for the pinbone roller Quick-release system on conveyors Manufacturer: Marel Model: MS2610.10 Year: 2021 (new) Production hours: 0 Capacity: Up to 18 fillets/minute * Power: 0.4kW Machine dimensions L x W x H: 1,650 x 710 x 1,900 mm Machine weight: 180 kg.

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. Lodpfszcqziex Abzohl - one work cycle takes about 20 minutes.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle Ljdpfxjzi Hwfj Abzohl - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: used, This listing is for a Eppendorf ThermoMixer C Mixer. The unit is in full working condition and is ready for immediate release. The Eppendorf ThermoMixer C is a versatile and compact laboratory instrument designed for precise heating, cooling, and mixing of biological samples. Its advanced features and flexibility make it ideal for a wide range of laboratory applications. Key Features: - Heating and Cooling:Temperature Range: Operates from 15°C below room temperature (RT) to 100°C. - Heating Rate: Achieves up to 7°C/min when using SmartBlock plates. - Cooling Rate: Reduces temperature by up to 2.5°C/min from 100°C to RT. - Mixing Performance: Mixing Frequency: Adjustable between 300 and 3,000 rpm, suitable for various vessel types and applications. - Mixing Orbit: Provides a uniform 3 mm orbit for efficient sample mixing. Lodpfsxxx Sasx Abzshl - Mixing and Vortexing Radius: Ensures thorough mixing with a 1.5 mm radius. - Precision Temperature Control: - Accuracy: Ensures precise temperature control with an accuracy of ±0.5°C between 20°C and 45°C. - Timer Functionality:Adjustable Timer: Can be set from 15 seconds to 99 hours and 30 minutes or for continuous operation. - Flexibility:Interchangeable SmartBlocks: Offers 11 SmartBlock options to support all common lab vessels and plates, from 5 µL to 50 mL. - Condensation Prevention: Compatible with the Eppendorf ThermoTop (tect®) to prevent condensation and ensure sample integrity. - Simple and Intuitive Operation: - Predefined Program Keys: Facilitates quick and easy setup for common applications. - USB Connectivity: Includes a USB interface for data management and connectivity. Benefits: - Outstanding Precision: High performance in mixing and temperature control ensures reliable and reproducible results. - Versatile Compatibility: Suitable for plasmid, RNA, and DNA purification, cDNA synthesis, enzymatic reactions, bacterial growth, and protein/DNA/RNA denaturation. - Anti-Spill Technology: Prevents lid wetting and cross-contamination for enhanced sample protection. - Compact and Low Noise Design: Compact dimensions (20.6 × 30.4 × 13.6 cm) and low operating noise provide a stress-free workspace. - Cost-Effective Maintenance: Durable design and affordable, easy-to-replace SmartBlocks reduce operating costs. Applications: - The Eppendorf ThermoMixer C is ideal for laboratories requiring precise heating, cooling, and mixing capabilities for molecular biology, biochemistry, and life science applications. Its intuitive design and flexibility ensure dependable and reproducible results across a wide range of workflows.

Condition: good (used), Year of construction: 2003, Professional and high-performance strapping machine from a renowned German manufacturer, with frame internal dimensions of approximately 500 mm wide x 400 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system and a quick-change system for strap coils. - Up to approximately 50 straps per minute. - Strap release via a robust foot pedal. Lsdpfxoztaa Ij Abzehl - Strapping tension is continuously adjustable. - Soft tensioning possible. - Automatic strap loop ejection when strapping is released without any packaged goods. - Wear-resistant strap guides with a quick-change system. - The machine is height-adjustable and can be moved using castors. - Documentation consisting of operating manual, parts lists, and circuit diagrams. The machine can be demonstrated while powered on.

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, feed rate X-axis: 12 m/min, with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system. The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70. Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm. “e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection. Stable machine stand made of steel. Extendable workpiece support facilitates working with large workpieces. Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece. Chain feed with rubberized support pads for optimal hold on the workpiece. Ball-bearing roller support plate with Ø 770 mm. Feed guide rail with sliding rollers for sensitive materials. Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2. Edge detection using an infrared sensor. Shear cutter for pre-capping thick PVC/ABS edge materials. Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. Pneumatically tool-controlled gluing unit. Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned. Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°. Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel. Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height. 2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function. Polishing unit with 2 motors. Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended feed guide rail (+400 mm) 047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW 051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes 053 Spraying of lubricant Pneumatic-mechanical insertion lock to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 064 Pneumatic-mechanical insertion lock 067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. 050A Additional interchangeable glue tank, counter-rotating 090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motor-controlled adjustment and positioning for corner rounding cutters 085 Preparation for u-motion professional 033 LED lighting 505 Exhaust distributor professional Ljdpfxezcymhs Abzehl Includes delivery & inst

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Lsdpfsvvkipsx Abzjhl

Condition: good (used), Year of construction: 2005, Professional and high-performance strapping machine from a renowned German manufacturer, with frame internal dimensions of approximately 500 mm wide x 400 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system and a quick-change system for strap coils. - Up to approximately 50 straps per minute. - Strap release via a robust foot pedal. - Strapping tension is continuously adjustable. - Soft tensioning possible. - Automatic strap loop ejection when strapping is released without any packaged goods. - Wear-resistant strap guides with a quick-change system. Ljdozq Ekyspfx Abzjhl - The machine is height-adjustable and can be moved using castors. - Documentation consisting of operating manual, parts lists, and circuit diagrams. The machine can be demonstrated while powered on.

Condition: excellent (used), Forklift Attachment Drum Gripper Suitable for 2 x 200 L steel ribbed/steel lid drums Description Firm hold even on uneven floors Sturdy, welded steel construction Lhjdjxbq Irepfx Abzel Forklift attachment module with robust powder coating in blue (RAL 5010) Quick, easy installation on the forklift Automatic locking when lifting the drum Automatic clamp release when setting down Securely holds steel ribbed and tension ring drums Height adjustable Technical Specifications Finish: Hot-dip galvanized Area of ​​application: Lifting/transporting steel drums Outer width [mm] 1050 Outer depth [mm] 1080 Outer height [mm] 975 Fork pocket spacing [mm] 730 Fork pocket W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate Description 1 2006/42 DECLARATION OF CONFORMITY Weight [kg] 110 Find more items - new and used - in our shop! International shipping costs on request!