Used Hasegawa Pm 150 for sale (11,468)

Condition: new, empty load weight: 118 kg, maximum load weight: 632 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,475 mm, loading space width: 1,063 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer New Garden Trailer 150 KIPP with additional drop sides, support wheel and gray flat cover New Garden Trailer 150 KIPP trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 6 to 8 working days. Once you have received the car trailer, all you have to do is register it. Advantages of a Garden Trailer 150 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want! Dodpfot Id Skex Al Ajwc

Condition: new, Type: S 150 l Complete stainless steel Hopper capacity 150 liter Single working shaft with paddles Rotation of shaft in both directions Automatic stopping when cover is open Electric power: 2.2 kW Voltage: 380 V / 50 Hz Installation dimensions of machine in cm: Width: 100 Lenght: 60 Height: 100 Delivery time: after advanced payment, one working day Dsdpfxjh Dp Sbo Al Aewc

Condition: good (used), Bracket, holder, support block, retaining support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor Dedpeh Ecirjfx Al Aowc -Support stand: height-adjustable, swiveling -Height: up to approx. 650 mm -Width: 550 mm -Dimensions: see photos -Number: 12x holders available Price: per piece -Overall dimensions: 665/150/H650 mm -Weight: 15.3 kg/pc.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 08/2027, total width: 680 mm, total length: 970 mm, total height: 1,700 mm, input frequency: 50 Hz, year of last overhaul: 2026, electrical fuse: 16 A, power: 4 kW (5.44 HP), Planetarymixer Dwjdpfxeh H Svus Al Ajc Model: Rego PM 40 E mixer Power adjustment stepless Intervention - protective grid LED control with timer 1 stainless steel kettle 40 liters 1 broom, 1 flat beater electric boiler lift Stationary machine with tank car DGUV V3 tested Connection 400V, 2.3 kW, 16A-CEE plug Dimensions: 970 x 680 x 1700 mm, DxWxH Used machine overhauled with 6 months warranty Visit our large sales warehouse with over 400 bakery machines!

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners Dwsdpoin Rnqefx Al Asc -Manufacturer: Reisser, solar fastener 8.0 x 150 10 pieces/carton -Type: RSB-A-8.0/M10 x 150/50 -Material: A2 stainless steel/galvanized -Quantity: 108 boxes available -Price: per box -Carton dimensions: 285/90/H75 mm -Weight: 1.2 kg

Condition: new, The machine is characterized by simple operation, easy cleaning, and maintenance as well as stability during operation It is suitable for factories dealing with meat processing, restaurants, kitchens, and other catering facilities Djdpfx Aleikvrts Ajwc Dimensions: 1100× 550× 900mm Electrical power: 0.75kW Volume: 150 liter Delivery time: immediately after the advance payment (100%)

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate Dwedpfxjgrzh Es Al Ajc immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: good (used), Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit Dwjdpfjb A Sm Aex Al Ajc -Core drill bit: Ø 150 mm -Drill bit length: 470 mm -Quick-change mount -Weight: 5 kg

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron Dwedpfx Aleb A Tdys Aec -Hole spacing: 420 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 500/485/H80 mm -Weight: 18 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Martonair type: M3332 150 DF -Stroke: 150 mm -Piston rod: Ø 25 mm -Number: 2 pieces available Dwedpfxed S Aqdo Al Aec -Price: per piece -Dimensions: 90/130/H640 mm -Weight: 9.7 kg/piece

Condition: good (used), Roller conveyor, roller track, roller track Dwjdpfodwa Dkox Al Asc -Roller width: 595 mm -Conveyor length: 1500 mm -Roller diameter: 20 mm -Roller conveyor height: 280 mm -Dimensions: 1500/760/H280 mm -Weight: 44.5 kg

Condition: used, Three-phase motor, electric motor -Motor from Zapfenschlager Make: Harbs Type: ZSMV/2 -including: saw blade holder -Power: 4 kW -Speed: 2880 rpm -Construction: B3 -Protection class: IP 54 Dodpfxodwf The Al Aewc -Dimensions: 470/216/H165 mm -Weight: 36 kg

Condition: used, Thermal systems, fan heaters, heating elements -Space-saving fan heater: HVL 150 -Power: 150 W -Price: per piece Djdpfx Alsff Nmgo Aewc -Number: 4 pieces -Dimensions: 110/105/H60 mm -Weight: 0.5 kg/piece

Condition: new, NWK165 Diesel Generator Silent type Prime Power: 120 kW / 150 kVA Dwedpenkb Ukofx Al Aec Engine: Fawde & CA6DF2-19D, 4 cylinders, water-cool Connection: Sockets & 4P RCD circuit breaker Tank Capacity: Frequency: 50 Hz Voltage: 400/230 V Governing Type: Electronic Controller: Comap Intelilite4 AMF8 incl. AVR, battery charger , water heater

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm speed 2750 rpm drive 400 V / 0,7 kW Dwjdpfx Ajnvdtcel Asc space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Condition: excellent (used), 150 m (approx. 492 ft) of Jungheinrich Type MPB pallet racking Used, very good condition, see pictures Height: 3.9 m Dwjdpfx Ajp Dunfsl Ajc Depth: 110 cm, blue Field load: 8.4 tons Beam length: 2.7 m, yellow Beams with load capacity/bay: 2400 kg Negotiable price: €9,780.00 net ex-warehouse The offer includes: + 52 units of frames, pre-assembled, depth 110 cm, height 3.9 m + 204 units of beams, length 2.8 m, 2400 kg load capacity/bay + 408 units of locking devices + 208 units of concrete anchors Load capacity signs, documents, etc. are included. Further accessories can be found in the accessories catalog. The goods are in stock. Transport and installation are available upon request. Inspection is possible at any time by appointment. Further information upon request. We constantly have over 5000 m (approx. 16,404 ft) of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT ex-warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 meters of racking are immediately available • 20,000 m² of storage platforms & steel structures are immediately available • 30–50 semi-trailer truckloads of goods are processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF ACTIVITY: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of goods, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of the client. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), The scope of delivery includes: 01x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. Dwodpfx Alspiur Ao Ajc small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Included in delivery are: 10x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: Dwjdpfxjpl Tdgs Al Asc This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 56x stacking transport box, used Manufacturer: SSI Schäfer Dwjdpfx Aepl Tfwel Aoc type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1190 mm -Cross-section: 150 x 65 mm Dwjdspm Thdepfx Al Aoc -Photo: 600 mm (see sketch in the photos) -Transport dimensions: 1430/910/H190 mm -Weight: 280 kg

Condition: used, TECHNICAL DETAILS - grinding diameter : 0.1 – 10 [mm] - total length : 10 [mm] - working stroke : 0-10 [mm] - working grinding wheel dimensions : 150 x 50 x 50 [mm] - driving grinding wheel dimensions : 100 x 50 x 40 [mm] - driving grinding wheel diameter : 100 [mm] - working grinding wheel speed : 4500 [Rpm] - driving grinding wheel speed : 20-50 [Rpm] Dwjdpfx Ajuhb N Sel Asc - power : 6 [kW] - min. pressure : 5.6 [bar] - dimensions : 1300 x 1100 [mm] - weight : 700 [kg]

Condition: used, Gear motor, electric motor Dwjdpfedac D Nex Al Aoc -Speed: 150 rpm -Power: 0.135 kW -Construction: B14 -Shaft diameter: Ø 12 mm -Protection class: -Price: per piece -Number: 4x available -Dimensions: 270/110/H145 mm -Weight: 3.9 kg

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available Dodpfx Aoddfh Esl Aowc -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: good (used), Oscilloscope -110-240 V 50-400 Hz -Dimensions: 335/475/H145 mm -Weight: 7 kg Dodpsb A Hhlsfx Al Aowc

Condition: good (used), Year of construction: 1981, Heating, burner, gas burner Dedpfx Aob A Iy Dol Ajwc -Gas type: Natural gas (Liquefied petroleum) -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg