Used Haeusler Bender for sale (730)

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: Todpfx Aqsiivgyetec for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, Year of construction: 2026, tube bender R 1 ZOPF - without bending tooling Tedpefiqntjfx Aqtoc - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 220 volt single phase - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 50 mm - max. Bending angle of 210 °

Year of construction: 2024, condition: as good as new (ex-display), Hydraulic circular bending machine with variable axes, HRB 3V, by Durma. Technical specifications: Bending size: 3100 mm Bending capacity Ødx1.5: 51 mm Bending capacity Ødx5: 60 mm Edge bending capacity Ødx1.5: 39 mm Edge bending capacity Ødx5: 35 mm Upper roller: 520 mm Tedpfx Aqod E Ib Ijtjc Lower roller: Side roller: 470 mm Max. roller spacing: Length: 6600 mm Width: 2250 mm Height: 2670 mm Working height: 1920 mm Weight: 40500 kg Motor power: 45 kW + 18.5 Min. additional upper roller diameter: Oil tank capacity: 1000 liters Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: good (used), Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press -Bending/straightening press: hydraulic profile bending machine -Base: solid construction, mobile -Hydraulic unit: unfortunately without type designation -Piston rod: Ø 55 mm / stroke: 200 mm -Individual components: see photos -Total dimensions: 1180/1060/H1000 mm -Weight: 445 kg Tjdot Hmhlopfx Aqtec

Year of construction: 2022, condition: used, 2022 | Tecmor PF36N EPC | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Tsdoznfcdepfx Aqtec 💰 Buy Now for EUR 7500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: TECMOR bender, working condition verified by owner , good condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40935 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, The Stierli-Bender, featuring a tool height of 130 mm and a long stroke of 200 mm, is suitable for both straightening and bending operations. Its open design and perpendicular insertion relative to the bending axis offer manufacturing advantages not only to steel and metal fabricators but also to sheet metal and copper processors. With the available standard tooling, very tight and closed forms, box sections, pipe pieces, brackets, or similar parts can be bent quickly and precisely. Depending on application requirements, the machine can be equipped with either a manual control unit or a CNC "Touch Screen" controller with angle programming. Tedpfx Asy Rppvjqtjc

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Upper wheel diameter: 150 mm Motorized rear roller delivery Todpfszl Dngox Aqtjc Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Weight: 1200 kg

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Tsdjzbcwmepfx Aqtsc Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Tsdpfoza D U Djx Aqtoc Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, machine/vehicle number: 05073 81 767 830, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender KL 1300 Price: 3000 Euros Todpfsy Tim Hox Aqtjc

Condition: used, functionality: fully functional, machine/vehicle number: 0159689206365, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender KLH 500/610 Price negotiable. Tjdpfx Ajy Tit Teqtec

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Tedpfjyzc Iaox Aqtjc Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Tedpfx Aqey Aubuetec Dial gauge position rollers readout safety installations with emergency stop

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm Tedpfjyv I Smex Aqtjc upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 10 mm pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm Tedsyv Nhcopfx Aqtjc side roll diameter 210 mm total power requirement 11 kW weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. Todsyv Nh Njpfx Aqtec When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Year of manufacture: 2000 Technical data Manufacturer: STÖLTING Type: VB 322 Year of manufacture: 2000 Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Equipment • CNC control • Conical bending device • Operating manual All information without guarantee. Tedpszgf Rxefx Aqtjc A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Tjdpfx Aoztckijqtjc Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm Tsdpfxezf Hkds Aqtoc - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: new, number of rollers: 4, number of digital displays: 3, Equipment: cone bending device, hardened rollers, swiveling upper roller, – 4 rolls – Capacity: 1270 x 4/5 mm – Pre-bending capacity: 1270 x 3/4 mm – Hardened rolls – Cone rolling capability – Top roll diameter: 130 mm – Bottom roll diameter: 130 mm – Side roll diameter: 130 mm – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swiveling Todpfoxytlqjx Aqtoc – Steel construction ST-52 – Overload protection – Documentation – 400 V

Condition: used, Year of construction: 1983, Solna D25 Year: 1983 Units: 8 (1 1 units) Folder: Tabloid / A4 / A5 Meg D 200 S automatic reel rewinder Tedsymby Rjpfx Aqtoc Technotrans refrigeration unit Plate puncher Plate bender Spare main motor Compressor Under power Available immediately. The machine was used for printing news papers

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Tjdpfx Ajygw Ikoqtsc Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device CE marking

Condition: like new (used), functionality: fully functional, number of rollers: 4, roller (bottom) diameter: 660 mm, roller (top) diameter: 660 mm, side roll diameter: 525 mm, working width: 3,050 mm, sheet thickness (max.): 60 mm, overall weight: 113,000 kg, total length: 6,500 mm, total width: 5,200 mm, total height: 4,250 mm, Equipment: documentation/manual, HYDRAULICS Todpfswrnkhjx Aqtjc Useful length mm 3050 Thickness mm 60 Upper roller diameter mm 660 Lower roller diameter mm 660 Side roller diameter mm 525 Lower roller movement mm 110 Bending roller movement mm 465 Approx. weight kg 113,000 USED MACHINE OVERHAULED

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 240 V, input frequency: 50 Hz, Kodak Magnus 800 Quantum Platesetter (CTP) — Complete System for Sale Manufactured: March 2009 | Fully Functional | Status: Ready System Overview Offered here is a complete Kodak Magnus 800 Quantum thermal CTP (Computer-to-Plate) line, sold as a full working system including the platesetter, automatic processor, multi-cassette autoloader, chiller, and punch/bender unit. This setup has been in production use and is shown powered on and reporting "Ready" status on its native control software. Todpezzpwrsfx Aqtec System Components 1. Kodak Magnus 800 Quantum Platesetter Serial No.: M8G0967 | Manufactured: March 2009 Cat No: 010-00663A Electrical: 200–240V, 50Hz, 15A Pneumatics: 8 Bar Class 1 laser product, CE / CSA (C/US) certified 2. Magnus 800 Multi Cassette Unit (autoloader) Serial No.: M8M0488 | Manufactured: March 2009 Cat No: 010-00313A Electrical: Mains 200–240V 50Hz 5A + Platesetter 200–240V 50Hz 5A Pneumatics: 8 Bar CE / CSA (C/US) certified 3. Automatic Plate Processor — Mercury T-HD 1250 (made for Kodak by Heights UK Ltd.) Serial No.: ME10408 | Year: 2009 Electrical: 200–230V, 16A, 50/60Hz, 2W+GND CE, FCC, ETL certified 4. Recirculation Chiller — Neslab Merlin M75 Maintains stable processing temperature for consistent plate output (unit shown active, set to 16°C). 5. Plate Punch/Bender — hu.q CSG-125 Serial No.: 080872092016 | Manufactured: Aug 2008 Electrical: 200–240Vac, 1A, 50/60Hz CE, cUL/US Listed 6. Control Workstation Lenovo ThinkVision display + keyboard running native Magnus 800 controller software (Status / Tools / Miniview / Queue / Cassettes / Messages / Safety). Cassette bays loaded and configured with plate size TP-U 968x651x0.3. Highlights Complete, matched Kodak Magnus 800 line — platesetter, processor, autoloader, chiller, and finishing unit sold together All units date from the same production year (2008–2009), consistent with a single original installation System actively powered up and shown in "Ready" operating state Automatic cassette loading with multiple plate bays configured and stocked Includes integral roller conveyor/output section for plate handling Notes for Buyer Voltage/phase requirements: platesetter and processor both require 200–240V industrial supply (verify local phase configuration — processor listed as 2W+GND) Compressed air supply required (8 bar) for platesetter and cassette unit Buyer should arrange inspection/live demonstration and professional disconnection, rigging, and transport, as with any large-format CTP installation Sold as-is; recommend a functional test run with actual plate material prior to purchase

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 10 h, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, roller diameter: 130 mm, roller length: 2,050 mm, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 1,500 kg, total length: 3,200 mm, total width: 750 mm, total height: 1,000 mm, power: 2.2 kW (2.99 HP), Equipment: cone bending device, foot remote control, swiveling upper roller, For sale is a high-quality 3-roller sheet metal rolling machine, Sahinler IRM 2050 x 130, with an electric drive. The machine was only purchased for one project and has approximately 10 operating hours. Technically and visually, it is in almost new condition. Particularly practical: The machine is equipped with heavy-duty rollers, making it mobile and allowing for flexible movement within the workshop. Technical data: Manufacturer: Sahinler Type: IRM 2050 x 130 Year of manufacture: 2022 Operating hours: approx. 10 h Usable sheet metal length: 2,050 mm Maximum sheet metal thickness: 3 mm Roller diameter: 130 mm Drive power: 2.2 kW Weight: approx. 1,500 kg Dimensions (L x W x H): 3,200 x 750 x 1,000 mm Equipment: 3-roller design Asymmetrical roller arrangement with pre-bending function Tsdpfxjzdnfmj Aqtoc 2 driven rollers with brake motor Swiveling top roller forward Forward and reverse operation Conical rounding by tilting the rear roller Mobile control panel Mobile thanks to retrofitted heavy-duty rollers The machine is ready for immediate use and can be inspected by arrangement. If you are interested or have any questions, please do not hesitate to contact me.