Used Glasner Sandblaster for sale (354)

Condition: new, functionality: fully functional, power: 235 kW (319.51 HP), fuel type: diesel, maximum load weight: 8,000 kg, overall weight: 18,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, differential lock, electric window regulation, fog lights, onboard computer, power assisted steering, power mirror, soot filter, tachograph, truck registration, IVECO EUROCARGO 180-320K 0 km, registered 11/2025 EURO 6E, 9-speed manual transmission, K construction site version, rear leaf spring suspension, differential lock, ZF power take-off, expansion module, immobilizer, engine brake, air conditioning, Top Confort sprung driver's seat with armrest, power windows, power and heated mirrors, central locking with remote control, Bluetooth radio, LED daytime running lights, sunroof, sun visor, fog lights, radiator protection, digital tachograph, audible reversing alarm, sheet metal front bumper, front and rear mud flaps, tubular rear bumper, axle loads: 1st axle 7,500 kg, 2nd axle 12,000 kg, tires 315/80 R 22.5, plus other standard accessories. Equipped with a 4.50 x 2.55 m three-way steel tipper body with anti-vibration and silenced supports, 60 cm reinforced aluminum side boards divided into two sections with detachable posts with 2 levers, rear side board with flag-type opening with U-shaped reinforcement, 4 mm wear-resistant steel floor, sandblasting and painting. BONFIGLIOLI P20.000XL crane with 4 extensions + JIB with 4 extensions, SCANRECO radio remote control, 2 front hydraulic and pivoting stabilizers + 2 rear stabilizers with hydraulic widening, complete with 4.0 interconnection KIT (therefore eligible for the new 180% hyper-depreciation scheme as provided by the 2026 Budget Law). Total load capacity 18,000 kg, payload with JIB approximately 6,200 kg. MASON TRUCKS Via Vicenza, 31 Vedelago (Treviso) Dkedpfxow Nbg Ao Ab Tjp

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank Dkedpfx Abefdkb Eo Tsp  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Dedpfx Abovr Tbae Tjkp Table diameter : 1.200 mm Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~12 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 221055-1, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 2,430 mm, total length: 12,080 mm, total height: 2,880 mm, fuel: diesel, overall weight: 18,000 kg, continuous power (apparent): 770 kVA, continuous power: 616 kW (837.53 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 16,400 cm³, fuel tank capacity: 9,000 l, tank capacity: 9,000 l, power: 616 kW (837.53 HP), nominal power (apparent): 770 kVA, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, EPS-C40 770S - 72h Container Emergency Power Supply Unit: AVAILABLE IMMEDIATELY!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated power PRP: 700.0 kVA, 560.0 kW cos Phi = 0.8 Rated power LTP: 770.0 kVA, 616.0 kW cos Phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation returned to the engine block, fuel system with pre-filter, filter, and water separator, Dkodpevyp H Ujfx Ab Top combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible transition. Electric starter, engine shut-off device, and electronically governed speed regulator. Rated power: 596.0 kW Rated speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 cm³ Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous output: 730.0 kVA at 40°C Rated voltage: 400V Rated frequency: 50Hz Manual engine oil change pump from 700 kVA Manual pump for emptying the engine oil pan. Electric engine preheater 1000W up to 700 kVA 1.00 unit The preheated coolant circulates in the primary cooling circuit of the engine via convection. Connected with flexible coolant hoses to the engine’s internal cooling circuit, equipped with shut-off valves for maintenance accessibility. Coolant recirculation pump ensures safe preheating of the engine. Walls and ceiling made from pressed steel plate. Derusting and cleaning accomplished by sandblasting the welded structure. The container is coated inside and out with marine-grade primers and paints for seawater resistance. Container 40" HC High Cube Soundproofed Container ISO 1496-1 for power generation units, external dimensions according to ISO 668. Wall and roof panels are insulated with self-extinguishing, oil- and water-resistant sound insulation material, enclosed with glass fibre matting and electro-galvanized coated perforated sheet metal cassettes. The exhaust silencer is housed in a separate compartment within the container. Radiant heat is safely discharged vertically with the cooling airflow from the front-mounted radiator. Air intake openings are installed in the wall surfaces; air exhaust outlet in the roof. The exhaust outlet of the silencer is protected by an exhaust flap against the ingress of water. One front side is equipped with double-leaf doors with circumferential sealing and serves as an inspection opening. Side personnel doors, with emergency release and circumferential sealing, provide access for maintenance work. The silencer and exhaust compartment is also fitted with an access door. Plant operation is performed externally. The control system and indicators can be viewed through an inspection window even when the door of the control panel is closed. The emergency stop button is protected from damage and mounted in a recessed housing niche. Cable entry can be made from the side or through the container floor. The floor entry is prepared for annular space seals DN 150. 40" Container collection tray according to WHG Oil-tight welded checker plate floor with surrounding upstand, min. 50 mm And much more… Special feature: MAINS PARALLEL operation possible!!!

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 957 h, type of input current: three-phase, overall weight: 600 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 30 W, feed length X-axis: 200 mm, feed length Y-axis: 250 mm, feed length Z-axis: 330 mm, travel speed (max.): 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. Peripheral Equipment & Accessories For sale is a high-performance and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine Details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripherals: complete, all original EOS components _____ Technical Specifications: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (z-axis, depending on material) • Materials: PA12, PA11, TPU, and other SLS-compatible plastics Dsdey El Anepfx Ab Tokp • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / material management system • Machine weight: approx. 600 kg _____ Scope of delivery (complete system): • EOS Formiga P110 Velocis • Unpacking station and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for cost-efficient operation) • Leering sandblasting cabin type DI-12 (for professional post-processing of components) • Ruwac industrial vacuum cleaner, type WS 200H, Zone 22 ATEX-certified (for safe handling of plastic powders) • 4x material containers • 2x build containers _____ Special Highlights: • Very low operating hours (only 957 h) → like new condition • Complete, immediately ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material cycle → reduced material costs • Industrial standard – ideal for professional applications • All accessories are original EOS parts → perfectly matched system _____ Application Areas: • Prototyping • Small batch production • Spare parts & customized components If you have any questions or require further information, please feel free to send us a message or give us a call. A viewing is also possible by appointment.

Year of construction: 2026, condition: new, Sandblasting cabinet for clean blasting operations without contaminating the working environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to all-round seals on the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With compressed air connection on the outside. 2 large side doors for loading and unloading from both sides, even for longer workpieces. Integrated extraction system with replaceable air filter. Airflow is controlled via a foot pedal. 2 blasting guns: one fixed and one freely movable blasting gun. 3 separate switches for on/off, extraction, and cabinet lighting. 2 fluorescent tubes (230 volts), in a separate housing with a protective screen and replaceable protective film, including 5 replacement films. Working pressure is regulated via a pressure regulator with a pressure gauge. Dksdpfx Abscqm Rro Tsp Scope of delivery: High-quality blasting gun with ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Working cabinet volume: 310 l Air consumption: 200 - 350 l/min Working pressure: 2.8 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: used, Year of construction: 2009, filter area: 80 m², suction capacity: 8,000 m³/h, DANTHERM dust extractor, welding fume extraction, automatic self-cleaning cartridge filter, pneumatic, vacuum type for plasma cutting, laser, sandblasting, soda blasting, shot blasting, plastics and catalytic converters, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing explosion risk. Fan power: 11 kW with frequency inverter. Airflow capacity: 8,000 m³/h – 10,000 m³/h Dkedpfx Abjyq Nyge Tsp Filtration surface area: 80 m² Inlet diameter: 250 mm Stock no.: 1090

Condition: refurbished (used), functionality: fully functional, POWERSCREEN T4026 MOBILE CONVEYOR – COMPLETELY REFURBISHED For sale: 2 units of Powerscreen T4026 mobile conveyors in excellent technical condition, following a complete refurbishment. Technical specifications: * Length: 12 m * Belt width: 900 mm * Mobile conveyor * 1 unit with hydraulic drive * 1 unit with electric drive Refurbishment work carried out: * New conveyor belt * New rollers Dodpfx Abjzda Sgj Tekp * Overhauled drive and return drum * Frame sandblasted and repainted * New decals and markings * Complete servicing The conveyors are suitable for quarries, gravel pits, recycling plants, mines, and handling bulk materials. No further investment required – ready for immediate operation. Price: €15,000 / unit Price negotiation possible if both conveyors are purchased. More photos and a video of the conveyors in operation will be sent upon request.

Condition: refurbished (used), Year of construction: 1988, TECHNICAL DATA: Dodpfx Abjzc H Rao Tskp Jaw opening 200 x 620 mm Year of manufacture 1988 Throughput capacity - 80 t/h Feed material size 4-70 mm Weight 6081 kg Power requirement 90 - 132 kW Special features: Adjustable grinding plates Condition: Refurbished, wear parts replaced, sandblasted, primed, and painted Optional and upon request: Infeed hopper, discharge hopper, motor, frame, V-belt, belt guard, control cabinet with soft starter or frequency inverter, special paint finishes, hydraulic opening mechanism

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 13,100 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,350 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, We offer for sale new 11 m3 containers manufactured in our own production facility. The containers feature the following specifications: - Manufactured according to DIN 30722-1 - Lifting bracket with 50 mm diameter - Hook height 1570 mm - Internal body length 6,000 mm - Internal body width approx. 2,350 mm - Internal body height 800 mm - Floor made of 5 mm S-235 grade steel - Side walls made of 3 mm S-235 grade steel - Sheets and profiles continuously welded - Mostly stress-free construction - Floor brace spacing approx. 350 mm - Top chord made of S-355 special steel - All-round net hooks - External rollers, lubricatable and replaceable - Warning marking according to §32 (1) StVO & DIN 67520 - Total weight 15,000 kg - Tare weight approx. 1,900 kg - Payload approx. 13,100 kg - All steels sourced from Thyssen Krupp - All steel parts automatically sandblasted before processing - Double zinc phosphate primer with 120 µm - 2K coating in RAL 7016 with 80 µm - 6x 5t lashing points in the body floor - 2x 7t lashing points on the inside of the front wall - Traversable, spring-relieved hinged flap - Incl. nameplate & container inspection according to DGUV Rule 114-010 (formerly BGR 186) - Unit price: €5,700.00 plus VAT - Also available in stock in 5.5 m Dkodpszcm Hujfx Ab Top Delivery throughout Germany is possible for an additional charge. If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sales excepted.

Condition: used, maximum load weight: 13,443 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 01/2006, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, Year of construction: 2006, Equipment: tail-lift, Information in English: GROENEWEGEN TRAILER – FULLY INSULATED VEDECAR BOX, LIKE NEW Box body: Fully insulated isothermal VEDECAR box Chassis make and type: Groenewegen DRA-10-10-2 Cooling unit: None First registration: MOT (APK): 07 ? 2025 Internal dimensions (L x W x H): 735 x 250 x 255 cm Unladen weight: 6,560 kg Payload: 13,440 kg Gross vehicle weight (GVW): 20,000 kg Suspension: Air suspension Axles: BPW axles with disc brakes Tyre size: 275/70 R22.5 Tyre tread axle 1: Left 90% / Right 90% (Michelin) Tyre tread axle 2: Left 90% / Right 90% (Michelin) Additional features: - Fully repainted and sandblasted in 2029 - ABS - BPW axles with disc brakes - 2 toolboxes - Fully insulated VEDECAR box body - Dhollandia tail lift 2,000 kg load capacity - Complete service history available - Immediately available and ready for use - Absolutely rust-free, like new Further details: * Curb weight: 6,560 kg * First axle: Michelin, tyre size 275/70 R22.5, left external 90%, left internal 90%, right external 90%, right internal 90% * Second axle: Michelin, tyre size 275/70 R22.5, left external 90%, left internal 90%, right external 90%, right internal 90% * Tail lift: Manufacturer DHOLLANDIA, load capacity 2,000 kg * Axle 1: Position – Front, Brand – Other, Brake type – Disc brakes, Suspension – Air suspension, Twin tyres – Yes * Axle 2: Position – Rear, Brand – Other, Brake type – Disc brakes, Suspension – Air suspension, Twin tyres – Yes Further equipment: * Homepage Dkjdpfjxx E Tqox Ab Tep * Steering axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Please inform yourself in advance about export costs and procedures for your respective country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to prior sale, changes, and errors.

Condition: used, mileage: 740,000 km, power: 338 kW (459.55 HP), first registration: 05/2001, fuel type: diesel, overall weight: 26,000 kg, emission class: euro3, Equipment: ABS, all wheel drive, MAN FE 460 !!!! DAUTEL INTERCHANGE SYSTEM - Tipper + Fifth Wheel Coupling !!!!! First registration: km 6x4 German vehicle Dautel Interchange System Tipper Bordmatic Tipper and frame completely sandblasted and repainted Fifth wheel coupling Supports Tel: Please visit our website: ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number VAT deposit: €2000 Dsdpfx Aboy Rcfkj Tekp Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Airport transfer (Munich) or train station transfer (Passau)

Condition: used, mileage: 740,000 km, power: 338 kW (459.55 HP), first registration: 05/2001, fuel type: diesel, overall weight: 26,000 kg, emission class: euro3, Equipment: ABS, all wheel drive, MAN FE 460 !!!! DAUTEL INTERCHANGE SYSTEM - Tipper + Fifth Wheel Coupling !!!!! First registration: km 6X4 German vehicle Dautel Interchange System Tipper Onboard computer Tipper and frame completely sandblasted and repainted Fifth wheel coupling Supports Tel: Visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... ... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 € Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport Dkedpfxey Rcf Do Ab Tep - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, Year of construction: 2009, Liebherr crane 160 HC-L 8/16 including remote control: 160 HC-L 8/16 height: 37.5 m, reach 55 m, serial no. 30349039 Year of manufacture: 2009 Incl. the following crane parts: 1 undercarriage cross 2 base ballast A 7.5 to 12 base ballast B 4.8 to 1 boom 611. 10.7m 1 boom 621 8m 2 booms 622 10.35m 1 boom 631 5.18m 1 boom 641 tip 1 base tower 12.42m 5 tower section 4.14m "Completely repaired, sandblasted and repainted! This crane has been completely overhauled and is in excellent condition. Old paint and rust layers were thoroughly removed by sandblasting before a high-quality new coat of paint was applied. Subject to changes, errors and advance sales! You can find more vehicles on our Dkjdpjvx Eccsfx Ab Tsp Sales are made exclusively in accordance with our terms and conditions - see Homepage Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not represent an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted Dksdpfx Abolthguj Tep * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Roll tarp made of high-quality PVC (680 g/m²), color silver * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) Dkjdpsxn Eckjfx Ab Tep * Socket: 15-pin Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Flatbed executed as steel/welded construction, fixed-mounted, low design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics Dkodsx A Npdopfx Ab Tsp F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction Dksdpfjy Ei R Asx Ab Tep • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating feature (Type Jost JSK), mounted on the subframe. ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel plate is then mounted on the chassis. The crane and superstructure, including the fifth wheel plate, can also be used in combination. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler undercarriage would also be available; the net price is €149,900. ? Mounting/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front Dsdpfxey Hm E Hs Ab Tekp ? Platform body as a steel/welded construction, removable. ? Length approx. 380 cm, width approx. 248 cm. ? Platform body painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized finish with steps, removable stake pockets. ? Standard platform floor with welded 4 mm steel checker plate, painted in RAL (chassis color). ? 6 recessed lashing eyes, 2500 daN each, per side, in a slot profile with flexible arrangement. ? 4 lashing points for chains 6500 daN (2 in the front and 2 in the rear of the superstructure). ? Stable front wall consisting of a welded frame, welded steel sheet 4 mm and 5 accessory hooks, front wall height approx. 1300 mm, steel, painted, with 2 folding eyelets for lashing straps, welded on. ? Side panels, mudguards made of aluminum checker plate (sandblasted, powder-coated and painted). ? Multifix stake pocket rows, 2 rows with a distance of approx. 80 cm from the front and rear walls. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support under the chassis. ? Mounting of an underrun protection at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with endless rotation, fully assembled, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane are carried out according to the technical regulations and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection certificate. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on the left and one on the right, arrangement to be agreed upon. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available upon request.

Condition: new, maximum load weight: 24,200 kg, overall weight: 31,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 2026, Equipment: ABS, WIESE 2-Axle Hooklift Trailer with Lift Axle, Brand New Vehicle Data: Type: WAK 2-25 SK Gross Vehicle Weight: 31,000 kg Axle Load: 20,000 kg Fifth Wheel Load: 11,000 kg Unladen Weight: approx. 6,800 kg Payload: approx. 24,200 kg Dimensions: Overall Length: approx. 7,100 mm Overall Width: approx. 2,500 mm Fifth Wheel Height: approx. 1,150 mm Roller Height (equipment): approx. 1,500 mm Chassis / Axles: 2 x SAF axles, each 10,000 kg Disc brakes Air suspension with lift and lower function 1st axle liftable (lift axle) Axle spacing: 1,820 mm Brake System: WABCO two-line compressed air brake system EBS electronic braking system Automatic brake force regulator Spring-loaded parking brake Tyres: Djdpfxeyt T A Ds Ab Tekp 4x 425/65 R22.5 tyres Steel rims Hooklift / Hookloader: VDL hooklift, push/knuckle design Type: SK25-6750 DE Lifting/Tipping capacity: 25,000 kg Container length: 5,000 – 7,250 mm Hook height: 1,570 mm (DIN 30722) Tip angle: approx. 50° Max. oil pressure: 350 bar Equipment – Radio remote control with display: ControllerPlus control system Softstop (gentle lowering) Softslide (smooth container shifting) Automatic axle stabilisation during hydraulic operation Manual control for emergency operation Additional Equipment: 4 work lights 24V lighting system as per StVZO 7-pin and 15-pin socket at the front 2 gearbox support winches (2-speed) 4 plastic mudguards Wheel chocks Rear light bar with mud flaps Paintwork: Chassis sandblasted, primed, and painted Reflective tape on sides and rear according to EU regulations If you have any questions, please do not hesitate to contact us at any time.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) Dedpfsy Ei Rvex Ab Tjkp • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Type: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel coupling with sliding mechanism and self-lubricating (Jost JSK type), mounted on support frame • Reversing camera fully installed Bodywork: • Execution of all chassis modifications required for crane installation, including removal and installation of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork modifications are carried out in strict compliance with the bodybuilder guidelines of the respective chassis manufacturer and executed in premium quality. • Complete assembly of a proprietary designed and in-house manufactured special subframe made of fine-grained steel for crane and superstructure. The fully welded and bolted subframe to the chassis frame guarantees exceptional torsional rigidity and outstanding stability for the crane vehicle. A unique feature is the subframe construction, executed to the highest quality and coated in chassis color. • Installation/bolting of the crane and main outrigger support on the subframe. Installation of all hydraulic and electrical connections. Installation position: Front • Removable drop-side platform in steel/welded construction • Length approx. 380 cm, width approx. 248 cm Dkjdpfx Abjy Ei R Nj Tsp • Platform body painted in RAL (chassis colour) • Removable aluminium side boards by Suer, height 600 mm, anodised finish with step treads, removable Kinngripp stakes • Standard platform floor with welded 4 mm steel checker plate painted in RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, set in perforated rails for flexible arrangement • 4 chain lashing points 6500 daN (2 front, 2 rear on body) • Robust front wall made from welded frame, welded 4 mm sheet steel and 5 accessory hooks, wall height approx. 1300 mm, painted steel version, with 2 folding lashing eyes welded on for securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted); please specify RAL color • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted); specify RAL color; size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stake pockets, 2 rows (as agreed), approx. 80 cm from front and rear walls • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizing support mounted under chassis • Installation of underride protection at rear and additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections at front for semi-trailers and also at rear for trailers New crane, FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual, crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 beacons on the FH roof • 2 strobe lights in engine hood • 2 LED lights under bodywork at rear, left and right, position per agreement • 4 LED working lights, 2 each left and right

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the auxiliary frame ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Dkedpfx Ajy Hm Etsb Tsp Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis. The crane and superstructure, including the fifth wheel, can also be used together. The vehicle has a total of two fifth wheels, each of which can be moved longitudinally. A crawler would also be available, net price is €149,900. ? Mounting/bolting of the crane and main support beam to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed design as a removable steel/welded structure ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with steps, removable Kinngripp stanchions. ? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color) ? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement. ? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure) ? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2 foldable loops for lashing straps, welded. ? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and painted) ? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for trailers ? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI crane manufacturer. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front panel ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available on request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating features (Type Jost JSK), mounted on the subframe ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Body: Crane interchangeable system: The body including the crane can be disassembled, and a fifth wheel plate is then mounted on the chassis. The function of the crane and body including the fifth wheel plate is also possible. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler track would also be available, net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed body as a steel/welded construction, removable ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed body painted. Color: RAL (chassis color) ? Removable aluminum side boards, manufacturer Suer, height 600 mm, anodized design with steps, removable stake pockets. ? Standard flatbed floor with welded 4 mm steel tread plate, painted in RAL (chassis color) ? 6 recessed lashing points 2500 daN each side, in slot profile with flexible arrangement. ? 4 x lashing points for chains 6500 daN (2x front and 2x rear on the body) ? Sturdy front wall consisting of a welded frame, welded 4mm steel sheet and 5 accessory hooks, front wall height approx. 1300 mm, steel design, painted, with 2 foldable eyelets for lashing straps, welded on. ? Cladding sheets, fenders made of aluminum tread plate (sandblasted, powder-coated and painted) ? Multifix stake pocket, 2 rows with a distance from the front and rear of approx. 80 cm. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection device at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hyd. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof Dsdpfx Abjy Hm Eyj Tjkp ? 2 x FLASH lights in the bonnet ? 2 x LED under the body at the rear, each on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right under the body in the area of the support legs, mounted. ? 4 x yellow LED light strips, 1x mounted on each support. Further information is available upon request.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF 3-Axle Tipper Semi-Trailer SKM 36/3 SR Membrane ? Steel Half-Pipe Body (50.4 m³) New Vehicle Availability: Expected February 2026 ----Technical Specifications Type: KEMPF SKM 36/3 SR Membrane * Design: 3-axle tipper semi-trailer with steel half-pipe body * Permissible total weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Loading length: approx. 9,500 mm * Loading width: approx. 2,350 mm * Body height: approx. 2,400 mm * Body volume: approx. 50.4 m³ * Total height: approx. 3,830 mm to the top edge (loaded) * Nominal coupling height: approx. 1,200 mm (technically 1,200–1,260 mm) ----Superstructure / Body Steel half-pipe body in durable off-road design * Material: highly wear-resistant HARDOX steel (HB 450 / HB 500) * Floor: continuous 5 mm HARDOX steel, reinforced * Side walls: 4 mm HARDOX steel * Front wall: 20° inclined, 4 mm HARDOX steel * Rear wall: double-leaf (1/3 left, 2/3 right), grain-tight, with pneumatic 2-hook locking system and integrated slide (400 x 400 mm) * Cover plate: removable, protects slider from dirt and damage * Air vibrator: rear left, operated by switch * Catwalk with ladder and guardrail according to accident prevention regulations (UVV) * Internal access via step system in the front wall * Shovel and broom holder on the front wall ----Chassis and Superstructure KEMPF welded construction made of fine-grained steel, sandblasted and hot-dip galvanized * Off-road version, conically tapered * Chassis color: Deep Black (RAL 9005) * Body color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) Dedpfx Asxn Ebmjb Tskp * Attachments: hot-dip galvanized and black powder-coated * Robust and high-quality overall construction ----Axles, Tyres, and Suspension SAF INTRADISC plus Integral off-road axles with disc brakes (Ø 430 mm) * Axle with automatic lift axle and forced lowering * Tyres: 385/65 R 22.5 (brand according to Kempf's choice) * Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO * Air suspension system with lift/lower function and quick release * Load gauge with scale display at the front left * Chassis laser-aligned (optimized tire wear and fuel consumption) ----Hydraulics and Tipping System HYVA front tipping cylinder, single-circuit hydraulic system (190–250 bar) * Edbro 1" closure coupling, high mounted * Hard-chromed piston, robust design ----Brake and Safety Systems Knorr EBS with RSP (Roll Stability Program) * ABS with 4-channel configuration (4S/2M) and brake light connection * Tire pressure monitoring system in accordance with ECE R141 * Trailer Info Module TIM G2 with brake wear indicator and diagnostic data * Acoustic reverse warning system * Folding underrun protection to ECE R58.03 with spring-assisted lifting ----Lighting and Electrics Complete LED lighting to EC standard, ADR compliant * LED triple chamber lights with chrome rings * LED side markers with indicator function * LED cargo space lighting, operated by switch * LED reversing lights (2 additional side-mounted) * LED rear fog light and license plate lighting * Brake light * 15-pin socket ----Accessories and Extras Two PVC toolboxes (approx. 660 x 500 x 460 mm each) * Removable aluminum ladder (4 m) with holder * Two plastic wheel chocks * Double-sided side underrun protection in accordance with EC regulation * Folding A-plate at the rear of the chassis * Large reflective panel (200 x 1,130 mm) * Mud flaps with spray suppressor * Two aluminum landing legs (load capacity 24 t) ----Tarpaulin and Frame Rol