Used Giardina Surface Lacquering Plant for sale (9,865)

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Csdpfx Ajzvddcjfgohc

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires Chsdpfxozvfk De Afgsc • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, functionality: fully functional, Year of construction: 2003, RC rotary dryer, Ammann - Burner: Oertli / 9.74 kW Chjdpfx Aozxbihjfgjc Year of manufacture: 2003 Complete steel construction

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Codpeyyzv Tefx Afgjhc

Condition: refurbished (used), Chamber filter press 1200x1200 Application: gravel works / tunnel construction Number of filter plates: available in different designs and number of plates Filter pressure: 15 bar Filter cloths: optional in coordination with the medium Piston diaphragm pump: optional Chedpfx Aerq I Iwefgjc Available: pre-configured from stock or according to customer requirements Condition: refurbished - rebuilt also according to customer requirements

Condition: used, Polygonmach mobile or portable hot mix asphalt plant is a type of asphalt plant that is designed to be easily transported and set up at different job sites. Unlike stationary plantsPolygonmach mobile plants can be quickly assembled, disassembled, and moved to different locations as needed. Capacity vary from 40 to 200 tph on design based. The functions of Polygonmach mobile/portable asphalt plant are similar to those of a stationary plant and include: Aggregate Storage and Handling: Polygonmach Mobile plants have storage bins or silos to store aggregates of different sizes. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: Polygonmach Mobile plants have storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored temporarily in storage silos or bins until it is ready for loadout onto trucks for transportation to the construction site. Cedpfx Afjx D A Agegehc Options: mobile, continuous Capacity: Max.: 200 t/h(122 lb/s)Min.: 40 t/h(24 lb/s)

Condition: good (used), Year of construction: 2015, total width: 1,700 mm, total length: 4,700 mm, total height: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this Novatec PLURITANK 550 ultrasonic cleaning system in good condition, manufactured in 2015. 1) Overall dimensions of the system: 4700 x 1700 x 1500 (h) mm 2) Total installed electrical power: 53 kW Cjdpfxezy R Rks Afgohc 3) Supply voltage: 400V - 3 phases + N + PE - 0 Hz 4) Dimensions of the tanks: • Tank 1: “Ultrasonic cleaning tank in hot aqueous detergent solution”  1450 x 1150 x 1500 (h) mm (capacity 620 L) • Tank 2: “Hot hydrokinetic rinsing tank for immersion in tap water with passivating agent”  1200 x 1150 x 1500 (h) mm (capacity 580 L) • Tank 3: “Hot air recirculation drying oven”  1200 x 1150 x 1500 (h) mm (capacity 580 L). If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor, badge_tracstrap Equipment: - Perforated sheet metal floor - Shovel rack - TracStrap securing system Net price: €6,743.70 / Gross price: €8,025.00 Article number: DPT235371700.22 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 370 x 170 x 20 cm • External dimensions (LxWxH): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 781 kg • Payload: 2,719 kg • Chassis: Low loader (wheels next to the superstructure) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor, internally on the sides • Screen-printed wooden floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel individual ramps, steel galvanized, adjustable, L=1.62m • Stable ACME locking system: closes silently, loading ramps are held in place by safety locking fasteners, rubber buffer dampens noise • Very low chassis for low approach angle • Excavator bucket rack • 10x lashing points on the side wall (1000dAN/kg), TÜV certified • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form a basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Free choice of lashing points when lashing in the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side wall • Reversing automatic system • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED position lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any desired features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright! Codpfxjzy A Arj Afgehc Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor, badge_tracstrap Equipment: - TracStrap securing system - Perforated sheet metal floor - Shovel rack Net price: €6,449.58 / Gross price: €7,675.00 Article number: DPT235321700.22 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 320 x 170 x 20 cm • External dimensions (L x W x H): 512 x 232 x 197 cm • Loading height of the floor: 40 cm Chjdpjzy Dq Refx Afgjc • Permissible total weight: 3,500 kg • Tare weight: 736 kg • Payload: 2,764 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wood floor in the middle, 18 mm thick, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel ramps, steel galvanized, adjustable, L = 1.62 m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator bucket rack • 10 x lashing eyes on the side panel (1000 dAN/kg), TÜV certified • Free choice of lashing points when lashing down on the perforated steel floor • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form the basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse automatic braking system • ALKO overrunning device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, durable and reliable. • LED rear marker lights • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis guarantee _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary transport license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: used, Applicable material: Concrete POLYGONMACH PSC100 100 m3/hour stationary concrete batching plant is a concrete batching plant that can produce 100 cubic meters of concrete per hour. It is preferred in large construction projects due to its high capacity. Stationary concrete batching plants are a complex system that includes components such as concrete mixers, cement silos, water meters, aggregate weighing systems and control panels. The 100 M3/h stationary concrete batching plant requires a larger space requirement than the smaller capacity stationary concrete batching plants and is usually specially designed for high-rise construction projects. Codpfex D Ddlox Afgehc The advantages of POLYGONMACH 100 m3/h stationary concrete batching plant are: 1. High capacity: 100 m3/hour fixed concrete batching plant is a high-capacity plant that can produce 100 cubic meters of concrete every hour. 2. Production of quality concrete: Stationary concrete batching plants are designed to produce high quality concrete. Therefore, a 100 m3/hour stationary concrete plant also produces high quality concrete. 3. Labor saving: 100 m3/hour fixed concrete batching plant reduces the number of workers and lowers labor costs. 4. Time saving: Fixed concrete batching plants speed up the production and distribution process of concrete and shorten the completion time of projects. 5. Less waste: Stationary concrete plants produce exactly the amount of concrete needed, therefore reducing the amount of waste and being environmentally friendly. 6. Less operating costs: Fixed concrete batching plants reduce operating costs and are more economical than other production methods. Mobility: stationary Capacity: 100 m³/h(3,531.47 ft³/h)

Condition: used, Applicable material: Concrete POLYGONMACH 120 M3/hour stationary concrete batching plant is one of the high capacity stationary concrete batching plants. These plants are used to produce high quality concrete for large construction projects and infrastructure activities. POLYGONMACH 120 M3/hour fixed concrete batching plant has a capacity of 120 m3/hour and operates fully automatically. Concrete mixing, conveying and unloading processes are fully automatic. In addition, these plants have special designs that facilitate the production of high quality concrete. They give superior results in factors such as concrete strength, quality and homogeneity. These power plants are often used for large-scale construction projects such as large bridges, dams, hydroelectric power stations, highways and shopping malls. Due to their stability, they guarantee on-time delivery and high productivity. Csdpfxex D A Snj Afgehc POLYGONMACH 120 M3/h stationary concrete batching plants are also known for their environmental friendliness. They have low energy consumption and low emission levels. Therefore, they are the preferred solution in sustainable projects around the world. Thanks to these features, POLYGONMACH 120 M3/hour stationary concrete batching plants are a frequently preferred option in the construction industry. Different types of mixers can be used in POLYGONMACH 120M3 concrete batching plants. 1. Rotary mixer: Rotary mixers work by rotating the drum while mixing the concrete. These mixers are suitable for both small and large-scale jobs and provide high performance. 2. Static mixer: In static mixers, fixed systems are used instead of parts to be held together to mix the concrete. These mixers may cost less but perform less well Mobility: stationary Other characteristics: automatic, special Capacity: 120 m³/h(4,237.76 ft³/h)

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Chjdpfsx Dzb Iox Afgoc Polygonmach single shaft mixers has been designed for ready mix concrete nad other type of concrete types prodcution from c10 to c40. Its robust helical design enables its low problematic, low maintenance necessity, low abbrasion rate, longlife span. Paddles, pallets and helical arms made from ni-hard 25mm width, body and side wearing plates made from 10mm hardox 400 plates. Discharge covers are controlled by pneumatic or hydraulic which can be managed by Scada-PLC software. From 0,5 to 2 m3 capacity is available. Polygonmach single shaft mixers offers its customers with automatic lubrication systems, easy lubrication bar to multiple points, top cover for several applications. Polygonmach in contrast to competitors gives you %100 flexible design and customer based projectsü, multiple hopper and mixer design is available. Motor type: hydraulic Mobility: truck-mounted Other characteristics: automatic, single-shaft Capacity: Max.: 2 m³(70.6 ft³)Min.: 0.5 m³(17.7 ft³) concrete plant

Condition: used, Year of construction: 1979, Used Machine Year of manufacture: 1979 Features and technical specifications: - Planing table width: 500 mm - Planing table length: 2,650 mm - Cutter shaft: 2x strip planer blades - Motor: 3 kW Chjdezk Nmxopfx Afgjc - Planing guide can be tilted up to 90° The machine does not have a motor brake and can therefore only be sold for spare parts! Availability: Immediate Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2002, Grinding area: 550 x 200 mm Max. grinding height: 390 mm Grinding wheel dimensions: max. 225 x 20 mm Bore: 50.8 mm Speed: 2,880 rpm Max. table load: 200 kg Machine weight: 1,800 kg Chedpfx Aszi R Sgefgjc

Condition: used, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, Empty weight: 3.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.5 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 510 - Table width [mm]: 800 - Table depth [mm]: 350 Chsdpfsxpgwrex Afgjc - Magnet width [mm]: 600 - Magnet depth [mm]: 350 - Max. grinding wheel diameter [mm]: 350 - Motor power: 4.5kW - Transport dimensions: 2600mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, grinding length: 10,000 mm, grinding width: 1,250 mm, FRITZ HECKERT SFBP 1250/10000 – Long-Bed Surface / Guideway Grinding Machine – 10,000 × 1,250 mm METALEX offers for sale a large industrial FRITZ HECKERT SFBP 1250/10000 surface grinding machine, designed for the precision grinding of very long and heavy workpieces. The machine has been used in our own workshop primarily for grinding machine tool beds and guideways, especially POREBA lathe beds during complete overhauls carried out by METALEX. With this machine design, the workpiece remains stationary during the grinding process, while the grinding unit travels longitudinally along the machine. This makes the machine particularly suitable for machining very long and heavy components without having to move the workpiece during grinding. Technical data and capabilities Manufacturer: FRITZ HECKERT / VEB Werkzeugmaschinenfabrik Type: SFBP 1250/10000 Maximum grinding length: approx. 10,000 mm Maximum grinding width: approx. 1,250 mm Heavy-duty, very rigid industrial construction Stationary workpiece during the grinding process Longitudinal movement of the grinding unit Chsdpfxozzcpzj Afgsc Suitable for very long and heavy workpieces Particularly suitable for grinding machine beds, guideways, machine frames and other long flat surfaces Very good grinding performance and surface quality The machine has been used by METALEX for our own production and machine rebuilding work. Among other applications, we have used it for precision grinding of POREBA lathe beds as part of our complete machine overhaul projects. The machine is located in our workshop in Bydgoszcz, Poland. The machine can be inspected at our facility in Bydgoszcz. Further technical information can be provided upon request. Details regarding dismantling and loading can also be discussed with interested buyers. Location: Koronowo, Poland Price: On request / negotiable

Condition: defective spare-parts repository (used), For dismantling – spindle drive defective – without coolant system. Cjdozxmdwepfx Afgjhc

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. Csdpfjzxqd Iox Afgshc If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: W09368333J2D38007, conveyor belt length: 8,500 mm, conveyor belt speed: 2,000 mm/s, conveyor belt width: 1,200 mm, roller length: 3,000 mm, number of rollers: 1, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Conveyor belt Width: 1,200 mm Length: 8,500 mm Belt speed: 2.0 m/s Discharge height: 5,050 mm Hopper Loading height: 3,307 mm Roller Number of rollers: 1 Roller length: 3,000 mm Maximum roller speed: 32 rpm Permissible total weight: 33,000 kg MACHINE DETAILS Cjdpszuyuusfx Afgehc Dimensions & Weight Working dimensions (L x W x H): 16,786 x 2,500 x 5,050 mm Transport dimensions (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Drive Engine type: Diesel engine Manufacturer: MTU 6R 1300 Emission standard: Stage V Rated power: 390 kW / 530 hp Fuel tank capacity: 950 l Operating hours: 5,000 h EQUIPMENT Overband magnet

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical specifications: Operating voltage: 400V AC, 3PH/PE Frequency: 50Hz Connected load: 110kVA Main supply fuse: 200A Production capacity: depending on material to be processed, 20m/min / 6" core up to max. 830mm diameter / up to 1.4t Degree of automation: fully automatic Csdjxzuc Hjpfx Afgshc Installation dimensions: 5.2x3.7x3.2m (LxWxH)

Condition: ready for operation (used), functionality: fully functional, grinding length, max. 600 mm Table clamping surface 600 x 200 mm Magnet dimensions 500 x 200 mm Csdpfx Ajz Ayqxsfgohc Maximum distance between table surface and center of the grinding spindle 495 mm Grinding wheel dimensions (D x b x d) 250 x 25 x 51 mm Grinding spindle drive 5.5 kW

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: Power Line 300 T2, For sale: a high-quality, continuous/throughput industrial washing system manufactured by the German company LPW Reinigungssysteme GmbH, model Power Line 300 T2. The machine was built in 2018 and is complemented by an original MAHLE Filtersysteme extension/expansion from 2019. Cedpfx Afjz Atinjgehc

Condition: used, functionality: fully functional, Double-deck sieve, 1,300 x 4,000 mm OD: 60x60 mm; UD: 15x15 mm Equipped with discharge chute, electric drive, and control cabinet Mobile unit on a single-axle trailer Chodpfsz Az I Sex Afgoc With discharge conveyor and discharge hopper

Condition: used, Year of construction: 1982, Planing width: 500 mm Table length: 2840 mm Chodsz Agu Dopfx Afgoc Cutterhead speed: approx. 5000 rpm Adjustability of the fence: 0 - 45° Motor power: 5.5 kW Dust extraction port: 160 mm Machine weight: approx. 950 kg including: toothed table lips console for feed hydraulic adjustment of the planing table NEW planer guard

Condition: used, total width: 800 mm, total length: 2,200 mm, total height: 1,500 mm, Colour: Green Empty weight: 1.000 kg Knife bench, knife sharpening machine grinder Model: Conventional Manufacturer: Erma Fulda Type: ASM-8/4 Series: 045371 Travel: 1200mm Table: 800x150mm Motor: 1.85kW Max. Spindle speed: 2730 rpm Grinding diameter: 165mm Machine-size: 2000x800x1550mm Csdez Ain Tjpfx Afgshc Machine-weight: 500kg - Documentation available: No - CE certificate present: No - Serial number: 045371 - Drive system: Conventional - Power [kW]: 1.9 - Number of axes [pcs]: 1 - X-axis travel [mm]: 1200 - Table width [mm]: 800 - Table depth [mm]: 150 - Max. grinding wheel diameter [mm]: 165 - Max. spindle speed [rpm]: 2730 - Options: Knife Sharpener, Tiltable magnet - Transport dimensions: 2200mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum