Used Forma Pbs M4 for sale (1,454)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction Ndsdpfx Aboyuuzdj Aec • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: good (used), Direct from catering butchers which closed recently. Commercial model with extended hopper and extended outfeed conveyor. Complete with paper interleaver and auto wipe function (needs compressed air for this function). Njdpfxet I E T Ae Ab Asdc

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Ndsdpfx Ajudim Djb Aec Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Nedpfx Abeudi Uzs Aodc Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Year of construction: 2003, power: 315 kW (428.28 HP), gearing type: other, first registration: 01/2003, mileage: 1,001 km, driver cabin: other, emission class: euro3, Vehicle location: Bovenden, yellow environmental sticker Construction: ENGINE EURO 3 6 cylinders 11967 cc, 6 cylinder in-line, OM 457, test engine, OM457ST3078, approx. 5000 km ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Ndodpfx Asvhgyheb Asc - .

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Ndsdpfxsu Dnrus Ab Aec Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: new, Year of construction: 2026, functionality: fully functional, conveyor belt width: 475 mm, warranty duration: 24 months, total width: 2,055 mm, total length: 940 mm, total height: 535 mm, input voltage: 400 V, table length: 2,055 mm, empty load weight: 95 kg, opening width: 30 mm, working width: 475 mm, roller length: 500 mm, space requirement height: 810 mm, space requirement length: 940 mm, space requirement width: 850 mm, New machine - new design Successor to the STM 514 24-month warranty on parts Advantages: + Robust, compact tabletop sheeter + Push-button operation + Suitable for all types of dough for rolling and rolling + Stainless steel tables can be folded up on the left and right + Scrapers can be easily removed without tools + Fast spare parts delivery within 1-2 business days Nsdjivdixopfx Ab Ajdc Technical specifications: - Belt width: 475 mm - Roller width: 500 mm - Table length: 2055 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on the product) - Speed: approx. 50 cm/sec - Motor power: 0.75 kW - Connection: 400 V - 3Ph - 50Hz - Protection: 16A CEE plug - Dimensions: --- Working position: 2055 x 940 x 535 mm (WxDxH) --- Rest position: 850 x 940 x 810 mm (WxDxH) - Net weight: 95 kg optionally possible at extra charge: - Machine equipped with original RONDO synthetic belts (to roll dough & marzipan or fondant) + €499 net The exchange of belts may extend the delivery time!

Year of construction: 2004, condition: good (used), Maja EVM 4006 Membrane Skinners Quantity 3 in stock Ndodsim Swaepfx Ab Ajc 560 mm rollers Fully stainless steel CE Marked. 3 phase / 50Hz 2.2 amp, 0.75KW

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm Nedpfx Ajmv Ehzob Aedc - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: used, Year of construction: 1993, machine/vehicle number: 931200665, Verpackungssystem - Wrapping & Shrinking Machines BVM SM4012 K-SC4030SYear 1993 - Serial-No. 931200665 Full automatic packaging SM 4012K Einlaufbreite max. 420mm / Infeed width max. 420mm Nedpfx Ajh Ax Hfjb Ajdc Shrink tunnel SC4030S Format (Breite x Höhe) / Size (width x high) 450mm x 330mm 5m Chain gripper feeder Delivery band GUK Feeder for single sheets Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2000, Technical details: turning diameter: 1600 mm turning length: 3000 mm centre height: 800 mm turning diameter over bed: 1600 mm Nodpfx Aohutpvjb Asdc turning diameter over bed slide: 1400 mm turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories *

Year of construction: 1999, condition: good (used), I am selling 3 more or less identical piston diaphragm pumps from GEHO, type ZPM 400. Built in 1999, max. 29bar, max. 15 m3/h, engine 28 kW. Technical documents are available and pumps were used as a transport pump in a sewage treatment plant. Nodpoq Tprrjfx Ab Ajdc Location is 58762 Altena in the Sauerland, can be loaded freely

Condition: excellent (used), functionality: fully functional, power: 330.97 kW (449.99 HP), first registration: 11/2008, fuel type: diesel, tire size: 315/60 R22,5, axle configuration: 2 axles, wheelbase: 5,700 mm, brakes: intarder, color: white, gearing type: mechanical, emission class: euro5, suspension: air, Year of construction: 2008, operation weight: 18,000 kg, DXI11 engine, 450 hp, Euro 5/EEV exhaust emissions, Full pneumatic, Automatic transmission, Intarder, 315/60 R22.5 tyres, ROLFO equipment with double platform for transporting vehicles (negative platform) and ROLFO trailer with platform under the trailer (10 vehicles), Year of registration: 11/2008, Km 1,463,431 on the display. The vehicle has been serviced and is ready to work (the former owner has an internal workshop where he keeps the vehicles in perfect working order) Ndedpfx Aov Nn Dwob Ajc

Condition: new, Year of construction: 2025, Fully automatic labeller for bottles, cans, containers. PLC control, operation via touch monitor. Variable speed motors and conveyor chain board. - Specifications: label length: 6-260mm; label width (backing paper width): 10-150mm; bottle diameter25-130mm; inner diameter of the label roll: 76mm; max. outer diameter of the label roll: 300mm; label precision: ± 1mm; production capacity: max. speed of the machine in neutral: 40 cycles/minute; power: 220V, 50Hz/60Hz. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nodpsv Nk Sdefx Ab Aedc

Condition: ready for operation (used), SEW Eurodrive R17F DRS71M4 / TH geared motor SN: 01.1971210703.0008.14,used, good condition, 100% functional, scope of delivery as per photos Ndsdpstwhr Uefx Ab Asc

Condition: used, Spare parts donor We are dismantling the CNC turning machine GILDEMEISTER, type GDM 42/2A CNC control system Eltropilot EPL 2 Machine no. 4.5733, year of manufacture 1989 Machine not operational - electrical problems Turning diameter, normal: 185 mm Swinging diameter, max.: 400 mm Cross slide travel = planar travel: 190 mm Longitudinal slide travel = longitudinal travel: 450 mm Spindle bore in the turning spindle: 52.7 mm Spindle passage in the draw tube: Ø 42 mm Ndsdjdzqm Rjpfx Ab Aoc Feed rate X and Z, max.: 3000 mm/min Spindle speed: 40-6300 rpm, continuously variable Motor power, spindle drive: 22 kW Mains connection: 400 volts, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT, Ø 200 mm - Tool turret, 12-station, VDI 40, every second station powered - Powered tool station in 6 stations - Electrical cabinet located beside the machine Footprint of the complete machine, L x W x H: 5000 x 2500 x 2100 mm Weight of the complete system: approx. 5.7 tons good condition Transport dimensions: Footprint of the base machine, L x W x H: 3000 x 2300 x 1900 mm Weight of the base machine: approx. 4.8 tons Footprint of the machine's electrical cabinet, L x W x H: 2500 x 550 x 2000 mm Weight of the machine's electrical cabinet: approx. 450 kg without chip conveyor Main motor missing Individual parts available upon request In the electrical cabinet: Siemens Siemens 6SC6101-3A-Z + the circuit boards

Condition: used, mileage: 295,499 km, power: 345 kW (469.07 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2027, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,300 mm, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 850 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), VOLVO FM 460 6x4 Dautel three-sided tipper with Bordmatik system VIN: B760716 Chassis / Components: * Full air suspension * Wheelbase: 1-2 = 3,400 mm / 2-3 = 1,370 mm * Tire size: Axle 1 = 385/65 R22.5 // Axle 2 + 3 = 315/80 R22.5 * Remaining tire tread: Front ~50/60%, Middle ~70/80%, Rear ~70/40% * 1 x aluminum fuel tank + 1 x AD-Blue tank * 1 x hydraulic tank * Foldable underrun protection * Trailer coupling Body: * Dautel tipper, three-sided tipper * Load area: 4.90 m x 2.42 m x 0.85 m * Bordmatik system * 5 x lashing eyes per side * EN 12640 certificate * Front wall 0.95 m * Rear flap, mechanical Cab / Cockpit * FM Day Cab * Roof hatch * Automatic climate control * Radio / CB radio * Bluetooth, AUX, USB * 2 x rotating beacons Engine / Transmission Njdpfez D Nzmox Ab Asdc * 345 kW // 12,777 cm³ // Euro 6b * I-Shift / Automatic * VEB + * Differential lock Weights * Gross vehicle weight 26,000 kg * Payload 13,860 kg * Unladen weight 12,140 kg Other * German vehicle * 1 previous owner * TÜV (technical inspection) valid until 02 / [year - missing in original text] Feel free to ask us! New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange the delivery of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing & spelling errors, changes, prior sale, and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day registration plates / export license plates We will gladly assist you in obtaining export license plates/short-term registration plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: excellent (used), mileage: 546,203 km, power: 309 kW (420.12 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 6,300 mm, Year of construction: 2016, Equipment: crane, Crane Crane length: 8.2 m Highest: ✓ Number of hydraulic extensions: 2 Number of support legs: 2 Number of extra functions: 2 Remote control: ✓ Rotator: ✓ Clamshell bucket: ✓ Meter capacity: 8,20 m Capacity kilo: 3200 kg = More information = General information Number of doors: 2 Cab: single Registration number: 2JEC711 Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Ndsdpfxoz I Uzae Ab Ajc Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 15.090 kg Carrying capacity: 21.910 kg GVW: 37.000 kg Max. towing weight: 42.000 kg Functional Crane: HMF 1643 Z2, year of manufacture 2015, behind the cab Tipper: Back Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 1,900 mm, total width: 1,500 mm, overall weight: 1,200 kg, spindle speed (max.): 6,300 rpm, product length (max.): 1,600 mm, number of axes: 3, This 3-axis MACMON M 454 V CNC was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 250 mm, and Z-axis travel of 400 mm. The machine is equipped with a spindle speed of 6300 rpm and a hydraulic tool clamping system. If you are looking to get high-quality machining capabilities, consider the MACMON M 454 V CNC vertical machining centre we have for sale. Contact us for further details. • Tool Clamping: Hydraulic • Measuring System: Linear glass scales on all axes • Voltage / Operating Voltage: 380 V Njdpjz Nhu Refx Ab Asdc • Frequency: 50 Hz • Control Voltage: 24 V • Connected Load / Power: 11 kW • Nominal Current: 23 A • Dimensions (L x W x H): 1600 mm x 1500 mm x 1900 mm - Weight: 1200 kg • Optional Equipment (Not included) - WNT vise (HDG2 125) - 20x SK tool holders in various designs (ER and Weldon) in very good condition - Storage box/rack for tool holders

Condition: ready for operation (used), Year of construction: 1988, Mössner Record SM 420 / Vertical Bandsaw -Overhang approx. 410mm -Workpiece height approx. 265mm -Saw band length approx. 3150-3260mm -Saw band width approx. 16mm -Table size approx. 605x605mm -Tiltable work table -Cutting speed 12 - 750 m/min -4 gear stages Ndjdpfx Absz Eqqle Ajc -Band welding device -Band grinding device -Foot switch -Drive power approx. 2 KW -Various spare saw bands -Documentation Dimensions: L x W x H 0.9 x 0.9 x 2 meters / Weight 500 Kg Errors and omissions excepted.

Condition: used, mileage: 1,001 km, first registration: 01/2018, empty load weight: 380 kg, color: grey, driver cabin: other, gearing type: other, Year of construction: 2018, load capacity: 1,500 kg, Equipment: crane, Vehicle location: Bovenden No rotating head! Maximum package height approx. 1250mm! Maximum package depth approx. 460mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Ndsdpfsz E Ni Hsx Ab Ajc

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total width: 1,225 mm, total height: 1,850 mm, overall weight: 1,470 kg, warranty duration: 12 months, hopper volume: 550 l, rotor diameter: 276 mm, rotational speed (max.): 13 rpm, blade width: 20 mm, power: 7.5 kW (10.20 HP), rotor width: 400 mm, Genox M400 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Ndodpfx Absz Hytre Aec Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with a 7.5kW drive motor and oversized, heavy duty reduction gearbox providing high torque, low speed operation. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.

Condition: excellent (used), mileage: 804,945 km, power: 338 kW (459.55 HP), first registration: 01/2012, fuel type: diesel, axle configuration: 8x4, wheelbase: 7,650 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 10,100 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Beacon(s) - Gullet - High Beams - Lift Axle - PTO - Radio/CD player - Rotator - Sleeping cabin Ndjdpfsz Dpvqex Ab Ajc - Steering Axle - Sun visor - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Rotator: ✓ = More information = General information Number of doors: 2 Cab: single Registration number: BZ-SJ-12 Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle: Max. axle load: 9000 kg; Steering Rear axle 1: Max. axle load: 9500 kg Rear axle 2: Max. axle load: 9500 kg Rear axle 3: Lift axle; Max. axle load: 7500 kg; Steering Weights Empty weight: 17.000 kg Carrying capacity: 18.600 kg GVW: 35.500 kg Max. towing weight: 50.000 kg Functional Crane: HMF 2200-K3, year of manufacture 2011, behind the cab Extendable superstructure: Yes Tipper: Back Layout Number of beds: 1 Maintenance, history and condition APK (MOT): tested until 02/2027 Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, lifting height: 7,000 mm, fuel type: electric, gearing type: automatic, tire condition: 100 %, Equipment: fork extension, STILL FM-4W 25 Four-Way Reach Truck – in almost new condition For sale is a STILL FM-4W 25 four-way reach truck, manufactured in 2025, with only approximately 2 operating hours. Consequently, the truck is in almost new condition. Thanks to its four-way technology, it is particularly suitable for the transport and storage of long materials, panels, profiles and other bulky materials. Technical data Ndedpfx Abjz Ihmce Aoc * Manufacturer: STILL * Model: FM-4W 25 * Year of manufacture: 2025 * Operating hours: approx. 2 h * Serial/Vehicle number: RSB36B 50031 * Load capacity: 2,500 kg * Lifting height: approx. 7,050 mm * Mast height retracted: approx. 3,190 mm * Operator protective roof: approx. 2,155–2,215 mm * 48 V electric drive * Battery weight: approx. 933 kg * Vehicle weight without battery: approx. 3,875 kg * Vehicle weight incl. battery: approx. 4,808 kg Special features Equipped with a Griptech FPN-25-RT fork adjustment and KOOI RG4-25 telescopic forks. * Load capacity attachment: 2,500 kg at a 600 mm load center * Base length telescopic forks: approx. 1,350 mm * Extension: approx. 1,050 mm * Total length extended: approx. 2,400 mm * Hydraulic fork adjustment * Four-way driving function for particularly flexible material transport The FM-4W 25 is particularly interesting for stone/natural stone businesses, metal trading companies, wood trading companies, building material trading companies and warehouses with long materials. Due to the year of manufacture (2025) and the extremely low number of operating hours, this is an opportunity to acquire a virtually unused STILL four-way reach truck. Inspection and test drive possible by appointment. Sales to businesses preferred. Further pictures and technical documents can be provided upon request.

Year of construction: 2004, condition: used, Year of manufacture: May 2004 Nsdpezykwwjfx Ab Aodc New: No Part suitable for: Renault Premium 420 Engine Attachment suited for: Trucks General condition: very good Technical condition: very good Visual appearance: very good