Used Fibro Nc Rotary Table for sale (21,806)

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg Lsdoxaafqjpfx Ab Ashn turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table diameter 340 mm Lodpfx Aexabm Njb Aohn table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: as good as new (ex-display), 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.6 revolutions per minute Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with the disk in a vertical position, measured to the center: 960 mm ~ 1910 mm Dimensions with the disk in a horizontal position: 1200 mm to 1900 mm Lsdsdvn E Ujpfx Ab Ashn

Condition: new, table diameter 180 mm 10 Kg 5 Kg chucking diameter 65 mm turning speeds 2 - 10 U/min swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 15 Kg dimensions of the machine ca. 400 x 400 x 400 m welding turntable with Lodpfx Asvn Uy Nsb Aohn - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: used, centre height / mm total power requirement / kW weight of the machine ca. 450 kg Ledpfx Aoy Sul Eob Aohn

Condition: used, Year of construction: 1988, table length 2000 mm Lodpfx Abstv H Txs Aohn table width 1800 mm table load 12,5 t table adjustment - longitudinal 1.250 mm table rotating 360 Grad table positioning 4 x 90 ° feeds - longitudinal 0,63 - 2.000 mm/min total power requirement 4 kW weight of the machine ca. 7,6 t

Condition: new, table diameter 650 mm table load 600 Kg swivelling range 90 Grad turning speeds 0,2 - 3,0 U/min total power requirement 0,55 + 0,4 kW weight of the machine ca. 0,28 t Welding rotary tilting table - Remote control Lhjdpfx Absulbgas Aen - 2 x welding current transmission

Condition: used, Year of construction: 1985, chucking diameter 315 mm table load 300 Kg turning speeds 0,1 - 4,0 U/min Lhedpfx Abjz Dky Ds Aen connected load frequency 220 V bore diameter 63 mm weight 0,09 t Dimensions (LxWxH) 0,8 x 0,6 x 1,2 m Welding turntable incl. - 315 mm chuck - 3-axis torch holder - Cutting torch - Machine base frame

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) Lhsdpfx Aexf Uytob Asn - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Year of construction: 2022, turning speeds 0,7-9,0 U/min Lsdpfxezip Iyj Ab Ajhn Torque 2,5-10 Nm table load capacity - central/maximum 50 kg welding current 400 A voltage 230 V

Condition: good (used), Extremely practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Maximum load: 100 kg horizontally. Maximum load: 50 kg vertically. Rotation speed: 0.5-9 rpm. Rotation direction: left and right. Rotary table speed: manually adjustable. Rotary table diameter: 345 mm. Rotary table height: 415 mm. Rotary table tilt angle: 0-90°. Lodocctnaepfx Ab Ajhn Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power supply: AC 110V / 220V 50/60Hz. Optional with jaws, additional cost: 160. Delivery to your doorstep: 80.

Year of construction: 1987, condition: used, machine/vehicle number: 6489; Lg-Nr. 13105, Technical data: - Maximum load capacity: 3000 kg - Turntable diameter: 1600 x 1600 mm - Turntable extension tubes - Turntable, motor-driven, swiveling: 0 - 90 / 135° Lsdpfxobp Ddzs Ab Ashn - Steplessly adjustable rotary motion: 0.01 - 4 rpm - Controllable clockwise and counterclockwise rotation - Welding current transfer: approx. 500 A - Power supply: 400 V - Table height in horizontal position without base: approx. 1200 mm - Table height in horizontal position with base: approx. 2200 mm - Space requirement: approx. W 1600 x H 1200 + 1000 x D 2400 mm - Weight: approx. 2700 kg

Condition: good (used), Year of construction: 2000, clamping force: 4,000 kN, _TECHNICAL DATA – ENGEL ES 1800H/500W/400 HL-2F_ _INJECTION UNIT_ | AG1800H | AG500W Screw diameter: 70 mm | 40 mm Screw length: L/D 20 | 20 Metering stroke: 270 mm | 200 mm Lsdpfx Aszvf H Ejb Aohn Screw speed: 226 rpm | 400 rpm Shot rate: 81 g/s | 32 g/s Injection rate: 386 cm³/s | 198 cm³/s Max. shot volume: 1039 cm³ | 251 cm³ Spec. injection pressure: 1441 bar | 1300 bar Spec. inj. pressure (increased): 1735 bar | 2020 bar Nozzle stroke: 750 mm | +5/-100 mm Nozzle contact force: 144 kN | 63 kN Heating capacity: 30.2 kW | 11.4 kW Heating zones (incl. nozzle): 5 | 7 _CLAMPING UNIT_ Clamping force: 4000 kN Opening stroke: 950 mm Ejector force: 82 kN Ejector stroke: 250 mm Max. platen distance: 1550 mm Min. mold height: 600 mm Platen BAP: 1400×1080 mm Platen FAP: 1400×1200 mm _DRIVE_ Pump power: 55 kW Oil (main tank): 540 l Oil (suction tank): 400 l _WEIGHT (without oil)_ Clamping unit: 27 850 kg Inj. unit AG1800H: 5 600 kg Inj. unit AG500W: 1 000 kg

Condition: used, Year of construction: 2010, table diameter 1000 mm Lhodpfx Absznndko Aon table load 0,5 t table height 300 mm total power requirement 12 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 1,2 x 0,3 m Permamantly rotationg table,adjustable in speed. Basic of table has a diameter of 570 mm. Table diameter increased to 1000 mm. Table was mounted on a surface ginding machine. Table will be delivered with a new spare motor.

Condition: new, table diameter 1000 mm table load 1200 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min max. torque on the faceplate 900 Nm welding current 500 Ampere total power requirement 0,75 + 0,75 kW weight of the machine ca. 0,8 t Welding rotary tilting table Ljdpevn Uwuefx Ab Aohn - Remote control with cable - 2 x welding current transmission

Condition: new, 2000 kg load capacity, welding rotary table, height-adjustable very robust Speed continuously adjustable from 0.05 to 0.7 RPM Rotary table diameter 1200 mm Tilting up to 120° Total height adjustment 600 mm Lhsdpfx Abjdvn E Ej Ajn Height adjustment from 1450 mm to 2050 mm Minimum height in horizontal position: 1350 mm, when tilted to the center: 1200 mm Maximum height in horizontal position: 1850 mm, when tilted to the center: 1700 mm Hand and foot remote control

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Lodpfx Abjxbtl Tj Ajhn Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation Lhjdpfx Asgvkgteb Aon - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: as good as new (ex-display), Very practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Max. load: 100 kg horizontally. Max. load: 50 kg vertically. Ledpfxo Ugnbe Ab Ashn Rotation speed: 1 to approx. 7 RPM. Rotation direction: left and right. Table speed: manually adjustable. Table diameter: 345 mm. Table height: 415 mm. Table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power: AC 110V / 220V 50/60Hz. Optional: with chuck/quick-release chuck, surcharge of 180 €. Delivery to your door: 90 €.

Condition: new, table diameter 1500 mm table load 5,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 10000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,5 + 3,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE Lhjdpfx Abjfv Axfe Aon • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 2000 mm table load 10,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min Lhjdofv Axijpfx Ab Ajn max. torque on the faceplate 20000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 3,0 + 4,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 600 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,8 U/min max. torque on the faceplate 450 Nm table pass 80 mm welding current 500 Ampere total power requirement 0,18 + 0,18 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). Ledpfx Ajfv Awzob Aohn No original pictures. Design but identical.

Condition: new, table diameter 1200 mm table load 1,2 t swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t Lhedpfx Asfv Aw Nsb Aon ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 2,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm Lodpfxofv Aw Tj Ab Ajhn welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right).

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere Lsdjfv Axmepfx Ab Ajhn total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.