Used Felder Mvp 300 for sale (13,256)

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW Dkodpfsvwgpbex Albot quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: as good as new (ex-display), Year of construction: 2026, Combination 4-in-1 machine HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- Dodpfx Aloci Tvhebskt - Circular Saw - Beam length 2,250 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 103 / 82 mm Max. support width to the left of the saw blade 2,310 mm Cutting width with parallel guide 820 mm Saw blade tilt 90° - 45° - Jointer - Working width 300 mm Jointer table length 1,510 mm Cutterhead diameter / Number of cutter knives 72 mm / 3 pcs. - Thicknesser - Table dimensions 300 x 585 mm Min./max. working height 3 / 230 mm Max. material removal 4 mm Feed rate 7 m / min - Table Router - Usable spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 7,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter on saw blade guard 60 mm - Promotional Price - Location: In stock, 54634 Bitburg

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Dedpfohkzu Asx Albokt Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. Dsdpfx Ash D If Hjlbekt - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Year of construction: 2005, condition: excellent (used), 16 stations design: cassette Dkodpfx Aleh I Nizsbjt shaft Ø: 45 mm strip width: 300 mm strip thickness: 2 mm

Condition: used, Year of construction: 2001, Technical data: Okuma Space Turn LB 300 MY Year of manufacture: 2001 Control: OSP U 100 L Max. Turning length: 340 mm Chuck diameter: 10 inch X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360°(0.0001°) Spindle: 4500 rpm Spindle clearance: 62 mm Weight: 6000 kg Accessories: Djdpfx Aljqucnbebjkt -Driven tools -Chip conveyor -Transformer -Manuals

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm Dkodspuy H Depfx Albot - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Year of construction: 1985, condition: good (used), machine/vehicle number: 376, Item No. 10275 Technical data: - Flexible shaft 1500 mm - Infinitely variable speed control from 1000 to 12000 rpm Djdpfxjk E Ey Do Albjkt - Power supply 380 V - Mobile base frame - Space requirement approx. W 750 x H 1400 x D 500 mm - Weight approx. 50 kg

Condition: excellent (used), Year of construction: 2008, 300 kg load capacity welding rotary table, with hollow shaft diameter 125 mm Dkodpfxolamtbj Albjt with chuck 320 mm or 400 mm very robust speed continuously adjustable from 0.15 to 5.0 RPM current transfer 350 A rotary table diameter 400 mm tilting up to 135° height in horizontal position 835 mm, when tilted up to the center approximately 735 mm length 850 mm x width 580 mm

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, 12 months warranty, in-stock item, new unit -Model on wheels -Maximum temperature: 300 °C -Oven chamber volume: 1050 liters -External dimensions: 1470 x 970 x 1920 mm (W x D x H) -Oven chamber dimensions: 1200 x 670 x 1400 mm (W x D x H) -Controller B510 (5 programs, each with 4 steps), also available with C550 (10 programs, each with 20 segments) -Horizontal, forced air circulation results in a temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with closed exhaust flap) -Permissible batch weight: 250 kg with distributed load -Load per grid shelf: 30 kg with distributed load -Reinforced floors and rails for 80 kg distributed load available upon request -Grid shelves included: 4 pcs -Maximum number of grid shelves: 14 pcs, available for short-term delivery -Connection power: max. 9.3 kW -Fan capacity: approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Weight: 450 kg -Documentation, CE declaration Packaging on pallet: 170 x 135 x 210 cm, 450 kg Dkodpeiqkr Isfx Albst The oven is not to be used for materials containing solvents or for heating food, animals, wood, grain, etc. Oven, industrial oven, heating cabinet, heating oven, laboratory oven, drying oven, temperature oven, testing cabinet

Condition: new, The scope of delivery includes: Dodpfjmv Dyzjx Albekt 01x stage support, new Manufacturer: SSI Schäfer design: corner connection / 90 suitable for CS Sigma profiles with a profile height of 300 mm type of screw connection: internal Material color: sendzimir galvanized Technical data of the stage support: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Condition: used, Technical data for the shelf: Shelving system: SSI Schäfer Type: R 3000 The scope of delivery includes: 01x used shelf Material color: sendzimir galvanized Dimensions: 1,282 x 300 x 30 mm f. Stand depth: 300 mm Weight per unit: approx. 3.96 kg Max. load per shelf 200 kg with evenly distributed load Currently available in stock: 1280 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Dkjdpfjtuu Urox Albet General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Input Power AC220V 50/60HZ Load capacity 0°300Kg, 90° 150 KG Table diameter 500mm Table heigh 600mm Rotating speed 0,3 - 2,5 rpm Tilting angle 0-90° Tilting way Manually Totating motor power 200W Dodpfsdylk Hox Albjkt

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used upright frame for roller conveyors for sale here. When placing an order, please specify the required upright heights and upright depths! The scope of delivery includes: Dkedpfx Aedf S Eyelbst 1x Upright frame, used Material color: completely galvanized Upright height: 250 to 700 mm (freely selectable by you) Upright depth: 300 to 700 mm (freely selectable by you) Other heights and depths can be manufactured upon request. Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions. - Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems. - Delivery with our own fleet (without unloading) Shipping costs upon request!

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails Dedpfx Alecnxa Nobskt large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2026, Max. lifting capacity: 330 kg Multiplex board, 1245 x 740 mm Dkjdpfx Alsbygv Nebot Height adjustment: 475 to 1070 mm

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: Dkjdpfoydpxvjx Albot - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,330 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, overall weight: 670 kg, Equipment: CE marking, saw blade guard, – Italian production – year of manufacture: 2012 TECHNICAL SPECIFICATIONS: – carriage length: 3200 mm – cutting width on the right: 1330 mm – saw blade diameter: min. 250 mm, max. 315 mm – scorer blade diameter: 120 mm – main motor: 5.5 kW – scorer motor: 0.75 kW Djdsyxph Ujpfx Albokt – brake – main saw spindle diameter: 30 mm – scorer spindle diameter: 20 mm – cutting height adjustment – cutting angle adjustment: 0° - 45° – max. cutting height: 100 mm – two latches – movable guard – extraction nozzle diameter: 80 and 120 mm – dimensions (L/W/H): 340 / 220 / 170 cm – weight: ~ 670 kg

Condition: good (used), Technical data: Planing width: up to 300 mm Planing height: up to 130 mm Dsdpfow Sh Dmjx Albokt Number of heads: 6 bottom – 5.5 kW right – 5.5 kW left – 5.5 kW top – 5.5 kW universal 360° – 5.5 kW bottom – 7.5 kW Feed motor: 2.2 kW, stepless adjustment via inverter 4 feed rollers in the table

Condition: new, functionality: fully functional, empty load weight: 265 kg, maximum load weight: 1,035 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,950 mm, loading space width: 1,630 mm, Year of construction: 2026, MARTZ Unilader 300 C 1.3T NEW VEHICLE Internal dimensions: 295 cm x 263 cm Gross vehicle weight: 1,300 kg Payload: 1,035 kg Braked single-axle low-loader 1,300 kg KNOTT axle with inertia brake, automatic reverse function, and handbrake Bolted and galvanized steel frame Folding drawbar With hydraulic assistance 15 mm thick, robust, and anti-slip phenolic plywood flooring 13-pin electrical system Plastic mudguards Support wheel 13-inch M+S tires Multiple lashing points Front position lights Rear lights with reversing light, rear fog light, and triangular reflectors Folding license plate holder 2x wheel chocks Optional accessories: - 100 km/h upgrade - Rear support stands - 40 cm steel side panels Dkedpfxoww Eg Rs Albst - Extension side panels - Mesh sides - Drive-on rear ramp - Motorcycle wheel rail - Crank handle for infinitely adjustable tipping angle - Flat tarp with or without hoops - High tarp - Coarse or fine mesh net - Spare wheel with holder Further accessories available on request! Photos are for reference only and may show optional accessories at additional cost. Plus vehicle registration document and shipping to Gera €150 net Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and immediately available for collection. Workshop open weekdays from 8:00 am - 5:00 pm for all types of repairs. Specialist for axle repairs, including caravan axles. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get professional advice by phone, visit our website, or drop by directly.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, WORKING DIMENSION 250x150 mm MILLING MOTOR 50 HP HYDRAULIC POWER UNIT MOTOR 20 HP Dsdpfx Alsw E Etysbokt PUSHING FORCE 40T MAXIMUM WORKING SECTION 250x150 mm EXIT ROLLER CONVEYOR NOT INCLUDED

Year of construction: 1999, condition: used, Saw blade diameter: 300 mm Manual material clamp Minimum quantity spray device Good condition Dkedpfxow Im Tro Albjt 120 kg

Condition: used, mileage: 18,950 km, power: 150 kW (203.94 HP), first registration: 07/2025, fuel type: electric, overall weight: 3,500 kg, fuel: electricity, energy efficiency: A, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 7, total width: 2,249 mm, total height: 1,901 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, traction control, E07 Hill-start assist, E7M MBUX multimedia system, JH0 Widescreen cockpit, JB7 Parking package with reversing camera, 02B OPERATING MANUAL AND SERVICE BOOKLET - GERMAN, 502 Digital extra: Updates for intelligent speed assistant, 806 AEJ X5/1, B25 Parking brake, electric, BA3 Active brake assist, BB6 Brake force compensation in case of brake booster failure, BB7 CO2-optimized braking system, BH1 HOLD function, C6L Multifunction steering wheel, CA3 Active steering assist, CF9 Basic chassis Plus, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and attachments painted in vehicle color, E1D Digital radio (DAB), E1E Digital extra: Hard disc navigation, E1T Touchpad, ED4 AGM battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in luggage compartment / cargo area, ET4 Active distance assist DISTRONIC, EW5 Digital extra: Remote and Charging Premium, EW8 Digital extra: Remote and Navigation Services, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F1O Center console with storage compartment + cup holders, medium version, F3Z Comfort closing, F65 Exterior mirrors automatically folding, F66 Lockable glove compartment, F69 Exterior mirrors, electrically adjustable and heated with integrated turn signal, F71 Interior mirror automatically dimming, FP3 Mirror package, FS5 Illuminated mirrors for sun visors, H00 Warm air duct to passenger compartment, H1K Pre-air conditioning, H20 Heat-insulating glass all around, HH4 Automatic climate control system THERMOTRONIC, HI1 Climate zone 1 (cold/comfort), HX1 Cooling, We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, touch-up paintwork has been carried out on the vehicle as part of the preparation. No liability for printing and spelling errors. Errors and prior sale reserved ... more on our homepage. Dkjdjzwwmmepfx Albjt

Condition: ready for operation (used), functionality: fully functional, HAHNDORF, Type SEW 52/300mm / Keyway Broaching Machine - Keyway broaching machine suitable for broaching internal keyways in gears, pulleys, or hubs. - Broaching length, stroke max. 300mm - Keyway width max. 32mm - Cutting speed 5 meters/minute - Return speed approx. 5 meters/minute - Clamping plates / table diameter approx. 380 x 300 mm - Smallest bore with special broaching tool 6mm - With broaching inserts 20mm - With standard broaching tool 60mm - Drive power 1.1 KW - Broaching tool with broaching insert - Connection cable Dimensions: L x W x H 1.2 x 0.6 x 1.6 meters / Weight 350 kg Errors and omissions excepted. Dkjdpfszw Idcjx Albot

Year of construction: 2023, condition: used, The "Rest Wind" machine is an electrically powered winding machine used for the controlled winding of residual materials onto a winding core. The machine is designed to collect material remnants from production or processing operations in a clean and uniform manner. The material is guided through guide rollers and wound onto the winding mandrel. The electric drive enables consistent winding at an adjustable speed. The machine features a control cabinet with start/stop function, main switch, emergency stop, and control indicators. The machine can be inspected in 06502 Thale by appointment. Dkjdpfx Ajzr I Azolbjt