Used D&K Europa Pb System B2 Laminating Machine for sale (114,259)

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Rodpfx Ajzuykvjhcocf Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Rcodpfey Uydfox Ahcef

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Rcodjudz D Uopfx Ahcsf Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Condition: used, Year of construction: 1998, WEEKE BP 150/K Manufacturer: WEEKE Type: BP 150/K Year of construction: 1998 Machine type: CNC machining center / Point-to-point cantilever machine Working area X approx. 3,645 mm* Working area Y approx. 1,250 mm* Working area Z approx. 250 mm* 1 main spindle power: 10 kW Main spindle speed max. 24,000 rpm Tool holder: HSK-F63 Tool changer: 8-position Rcjdpfozvbhrsx Ahcef 4th axis 30 vertical drilling spindles 6 horizontal drilling spindles Table system: Console table Number of consoles: 8 Vacuum pump Safety device Control system: HOMAG HOMATIC 2000 / HOMATIC 2000 IPC* Software: HOMAG woodWOP 4.5 4th axis: C-axis / NC-controlled auxiliary axis*

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Specifications see attached PDF. Rcsdjvpdhxepfx Ahcof Leasing possible. (All prices are NET)

Condition: new, How does it work? The magazine is manually fed with deck boards and stringer boards, then the machine automatically organizes the decks in the right position for nailing. The machine is constructed for continuous and reliable production of pallets. It combines professional precision with a user-friendly setup. The size of the manufactured pallets can be easily readjusted in just a few minutes. Deck Size: Min / max length: 600 mm - 1 600 mm Min / max width: 600 mm - 1 400 mm Stringer Min / max length: 600 mm - 1 400 mm Min / max width: 75 mm - 150 mm Min / max thickness: 16 mm - 28 mm Min / max wing: -20mm - +50mm Deck board Rcedpfx Ahewdurpocjf Min / max length: 600 mm - 1 600 mm Min / max width: 75 mm - 150 mm Min / max Thickness: 16mm - 28mm Specifications: Operators | 1 Length | 4,0 m Width I 3 m excluding platform ladder Height | 3,6 m Power | Electric: 14 kW, 3x400 V+N, Hydraulic: 22 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 400L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 24 deck boards/min Standard equipment: 2 cassettes for deck boards 3 channels for stringer feeding 3 cassettes for stringer 1 mechanical clinching plate Nailing system: Electric or hydraulic beam nailing, 1 nail box (9 nails), Individual nail picking, nail indication system, 9 nailing hammerheads Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: like new (used), For sale is a Renishaw XL80 laser interferometer system for machine calibration, suitable for linear and rotary axes, in very good condition. The measuring device is fully functional and has been used very little. It was manufactured in 2022. The device has an accuracy/deviation of 1 nm, and the software is, of course, included in the offer. If you have any further questions, please do not hesitate to contact me. Rsdpjzrgvmjfx Ahcocf

Condition: used, Year of construction: 2009, Folding machine MBO K 800.2/6 S-KTL Year: 2009 Description: Rcjdexg Nlmspfx Ahcsf - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Excluding pump - Machine was connected to a centralised air system Folding unit MBO K 800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left Excluding delivery Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: Rcedpfx Ajx Eb Abehcsf - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC Rcjdpfjzii Umox Ahcjf - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. Rcedpezb Ip Isfx Ahcsf TECHNICAL DETAILS Adjustable speed: up to 5 m/min Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: excellent (used), The Freeman FUSING 48M is a professional machine designed for the thermal bonding of materials using temperature, pressure, and a conveyor belt. The device is used in the apparel, footwear, and leather industries, as well as in the production of laminated materials. Rjdpfx Aszgx Idjhcocf The machine enables the durable bonding of interlinings, adhesive layers, and other reinforcing materials to fabrics and leather. Thanks to adjustable temperature, pressure, and belt speed, it allows for precise adjustment of operating parameters to suit the material being processed. Technical specifications: Manufacturer: Freeman Model: FUSING 48M Serial number: 9315 Power supply: 220 V 1 phase (1PH) Temperature control Pressure control Belt speed control Heated conveyor belt Pressure gauge Feeding and receiving table Steel construction Manufacturer: The Louis G. Freeman Co., USA Applications: Bonding of interlinings and apparel linings Lamination of fabrics and technical materials Production of clothing and leather goods Bonding of materials using heat-activated adhesives Heat transfer and fixing of appliques

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Rcedpfezc Agkex Ahcof Availability: short notice Location: Flörsheim

Year of construction: 2008, condition: used, Labelling Machine / Marking System SRD Stano-/Alone-Line Features: Rcodpfx Aeyfgp Ujhcsf * Used labelling machine with integrated marking system * Very robust construction * Condition: fully functional with signs of use * Ideal for fast material handling * Professionally dismantled and packaged Year of manufacture: 2008 Technical Data: Manufacturer: SRD Model: Stano/- Alone-Line Unit: Valentin SPE 106/12 Internal article number: 2026012704 Semi-automatic marking system for image and audio media Refer to the operation manual, wiring diagram, and pneumatic diagram for details Tailor-made solutions for your intralogistics. Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your competent partner! We are happy to provide you with a custom quote or assist you with planning or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and excellent network of professionals. We have successfully completed projects for companies from various industries, such as logistics, pharmaceutical, trades, and electronics. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can also supply fully automated sorting technology or additional components such as picking racks or containers.

Condition: new, Year: 2023 • Type: Robotic pick and place cell • Robots: 2 x Stäubli TS2-80 SCARA robots • Robot reach: 800 mm Rcjdpfoy An Egex Ahcef • Robot payload: 8.4 kg each • Guarding: Full enclosed safety cell • Controls: Integrated control cabinet with HMI • Teach pendants: 2 fitted • End of arm tooling: Vacuum gripper heads fitted • Conveyor system: Infeed/outfeed conveyors included • Application: High-speed food/product pick and place

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “GMP Qtopic-380 Auto” laminating machine Item for Sale: 1 x GMP Qtopic-380 Auto Rsdjzmtkmspfx Ahcjcf We can easily configure the machine to meet your specific needs. Please feel free to contact us! Condition: This listing is for a used machine, which may show signs of wear (minor scratches or discoloration). The unit has been tested to ensure it is in working order Packaging and Shipping: You are welcome to view the unit during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Colour: Blue Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Rjdpfxsztxn Re Ahcscf Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: • Easy operation • Multi-function display • Various welding processes can be selected: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling Rsdpfxoyrgu Rs Ahcscf • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2010, operating hours: 44,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 570S2200-400/170e² Baujahr: 2010 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 47 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Rcjdju E E H Sopfx Ahcef Schutzzaun

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details. Rcedpfeyl Tr Nox Ahcjf

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Redeu E Id Tspfx Ahcocf Förderband Schutzzaun

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK ZLFM-800SC is a fully automatic film laminating machine with integrated dust removal, designed for high-quality printed materials and packaging. It combines a high-performance feeder, a precise laminating unit, and an automatic cutting and stacking system into a compact production line. Thanks to the integrated dust removal system, optimal adhesion of the film to the printed sheet is achieved. The machine is ideal for printing companies and packaging manufacturers who expect the highest quality, high production speeds, and a fully automated workflow. ### Highlights * Fully automatic production process * Integrated electric dust removal * Precise film lamination with heated rollers Rcedpfezg E I Rex Ahcsf * Automatic high-pile feeder with non-stop paper feed * Automatic cutting and separating unit * Automatic stacker with continuous sheet discharge * Fast changeover and easy operation * Touchscreen control * Robust machine construction for continuous industrial operation ### Application Areas The machine is ideally suited for: * Folding cartons * Cardboard packaging * Book covers * Brochures * Business cards * Posters * Premium printed products * Food packaging * Cosmetic packaging * Pharmaceutical packaging ### Technical Data * Format range: 260 × 250 mm to 780 × 1040 mm * Model year: 2024 * High-pile feeder with non-stop feed * Electric dust removal * Main printing roller Ø 380 mm * Rubber roller Ø 305 mm * Heated oil temperature system for optimal lamination quality * Automatic cutting unit * Cutting speed up to 70 m/min * Pneumatic separating system * Automatic sheet delivery system with stacking system ### Standard Equipment * Automatic high-pile feeder * Electric dust removal * Heated laminating unit * Automatic cutting unit * Automatic stacker * Touchscreen control * Non-stop paper feed ### Included in the Scope of Delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ Machine commissioning on-site ✅ Free training and instruction for your operating personnel ✅ Comprehensive after-sales service and technical support, even after installation ### Delivery Time Approximately 6-8 weeks after order receipt ### Machine Type Fully automatic film laminating machine with integrated dust removal KMK ZLFM-800SC

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Paper cutters fo pin feed available. We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Rjdpfxetwc Abe Ahcjcf Just let us know and we have the solution!

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm Redpfx Ahokdnv Tjcocf - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: used, functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, Roller Conveyor Curve / 90-Degree Curve Manufacturer: Soco System Condition: Used Model: Roller Type: 90° Total outside width: approx. 1430 mm Total inside width: approx. 820 mm Rcodpfxjygyhao Ahcof Total width incl. motor: approx. 580 mm Conveying width: approx. 410 mm Roller pitch: approx. 60 mm Axle spacing: approx. 110 mm Roller type: Plastic Material: Steel/Plastic Color: Galvanized, Light Grey, Orange Includes 2 Soco 0.12 kW motors Stock quantity: 4 units Price per unit The conveyor system was fully operational until disassembly. Condition: Fully functional, with signs of use Ideal for fast material handling Internal item number: 2026020302 Pickup address: Industriestraße 5 (47918 Tönisvorst) Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your materials will glide smoothly to their destination—even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading your goods, we are your experienced partner! We are happy to provide you with a customized quote or advise you regarding concepts or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our extensive network of specialists. We have already successfully completed projects for companies in various sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will work to optimize your operations and material flow efficiently and sustainably. We can also offer fully automated sorting technology and additional components such as picking shelves or containers.