Used Cooling Compressor, Heating Compressor for sale (22,588)

Condition: good (used), functionality: fully functional, machine/vehicle number: og10, 10m³ tank for diesel, heating oil or HVO Pgedpfscyb Twex Angsu

Condition: new, Power 7,5 KW Receiver 500 L weight of the machine ca. 300 kg dimensions of the machine ca. 1,7x 0,6 x 1,45 m feed pressure 16 bar liter capacity 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around Pgjdpjhid Erjfx Angju to reduce peak voltages. The UWM 10/870/500 is available with 400 V

Condition: new, Year of construction: 2026, tank made of steel to store heating oil, diesel or HVO Pgedpfxji A Hw Ro Angju

Condition: excellent (used), Year of construction: 2018, ATLAS COPCO COMPRESSOR XAS58 3.0m3/min 2018r. Compressor DIESEL ATLAS COPCO XAS 58 machine after service Technical data: capacity 3.00 m3/min; working pressure 7 Bar; year of production 2018; KUBOTA engine Podpfx Anetyk Svogegu mileage 681h!!! compressor fully operational net price: 39500 zł gross price: 48585 zł Below is a link to the video , showing the work of the machine

Condition: excellent (used), Year of construction: 2012, operating hours: 11,118 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 972.6 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Premium used Atlas Copco GA90 90 kW 7.5 bar 16.21 m3/min Only 11,118 operating hours! Psdpfx Anot E I D Ejgogu

Condition: good (used), Swegon Teal 16.2ST 2PS air cooler water chiller Pgodpfx Ajqqhrhsngeu Refrigerant R401A

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Oil-water separator for compressor condensate Pgsdpfoz Ndazjx Angju Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty)

Condition: excellent (used), Year of construction: 2010, PROD. KAESER TYPE CSD102 S/N 1379 YEAR 2010 POWER (kW) 55 CAPACITY (m3/min) 8.75 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 13407/28537 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no DOCUMENTS no CONNECTIONS 2 Pjdoz Dhd Hjpfx Angjgu NEW/USED USED

Condition: excellent (used), Year of construction: 2003, S014178 PROD. ATLAS COPCO Pedpjz D Duhefx Angogu TYPE GX7 S/N AII629046 YEAR 2003 POWER (kW) 7.5 CAPACITY (m3/min) 1.17 PRESSURE (bar) 10 HOURS (SERVICE/TOTAL) 21268 FREQUENCY CONVERTER NO BUILT-IN DRYER NO HEAT EXCHANGER NO COOLED (AIR/WATER) AIR WITH TANK YES, 500 L DOCUMENTS YES, available at the service center NEW/USED USED

Condition: excellent (used), Year of construction: 2007, S015113 PROD. KÄSER TYPE ASD32 S/N 1183 YEAR 2007 POWER (kW) 18.5 CAPACITY (m3/min) 2.95 PRESSURE (bar) 11 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes EXCHANGER no COOLED BY (AIR/WATER) air Psdpfsz D E Hfox Angogu ON TANK no DOCUMENTS yes CONNECTION 1 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2004, S016550 PROD. RENNER TYPE RSK37 Pgjdpez Elfdjfx Angsu S/N 8470 YEAR 2004 POWER (kW) 37 OUTPUT (m3/min) 6.15 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 7166 / 25832 FREQUENCY CONVERTER no BUILT-IN DRYER yes EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1' NEW/USED USED

Condition: used, Year of construction: 1993, feed pressure 8,0 bar liter capacity 2340 l/min Number of working hours 13382 h voltage 400 V total power requirement 15,0 kW Pedjz Dxn Aopfx Angegu weight of the machine ca. 0,45 t dimensions of the machine ca. 0,0 x 0,8 x 1,3 m Serial no. 1006 Operating hours run: 26736 Operating hours load: 18261

Condition: used, Year of construction: 2014, operating hours: 32,903 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 1,055.4 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, Atlas Copco GA90VSD screw compressor Pgjdpfxjz Ngz Aj Angou Inverter integrated 90 kW 13 bar 17.59 m3/min Year of manufacture: 2014 Operating hours: 32,903 h

Condition: used, machine/vehicle number: 220.00452, power: 7.5 kW (10.20 HP), Used, functional ALUP compressor stage Air End Tri AG 51-S The stage is used and in working order. Pedpfx Anjz Er Edjgogu Art. No.: 220.00452 Motor: 7.5 kW 3970 rpm 16.5 A The price is €350 plus VAT. Freight shipping is available for an additional charge.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. Pjdpfxoz Iww Re Angegu We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: excellent (used), Used, electrically heated stainless steel tank / transport container Last use: Chemicals Item number: 10907 Volume: 1000 L Type: Upright, mounted on a stainless steel frame Material (in contact with medium): 1.4301 / AISI304 Pgodpfx Anjz Ixgyogeu Design: With electric heating Bottom: Curved Top: Curved Operating pressure according to nameplate: 0.30 bar Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 240 mm Materials: Inside: 1.4301 / AISI 304 Frame: Stainless steel Features: Nameplate: Yes Outlet valve: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 433 kg

Condition: excellent (used), S017062 PROD. ATLASCOPCO TYPE GA26 Plus S/N API310087 YEAR 2008 POWER (kW) 26 CAPACITY (m3/min) 4.79 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 22740/23509 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air Podpjz Iz Igsfx Angsgu ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: repair required (used), Year of construction: 2018, operating hours: 34,881 h, functionality: limited functionality, power: 45 kW (61.18 HP), volume flow: 502.2 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor 45 kW Pjdpoz Iz Itefx Angjgu 8.50 bar 8.37 m3/min Year of manufacture: 2018 Operating hours: 34,881 Problem with the cooling system. The temperature is rising rapidly. The compressor is running.

Condition: good (used), Year of construction: 2020, pressure (max.): 10 bar, noise level: 68 dB, Double-piston compressor with dryer Brand: KAESER Model: KCT 401-100 Year: 2020 Type: Double-piston and oil-free (dry-running) Pressure: 10 Bar Flow rate: 275 Liters/min. Power: 2.4KW (3.2Hp) Tank: 100 Liters Sound level: 68dB Three-phase 380V - Suitable for continuous use: Unlike conventional piston compressors, the KCT series compressor blocks from Kaeser are designed for a 100% duty cycle. - Typical applications: Dentistry, laboratories, pharmaceutical sector, medical technology, food packaging, and the electronics industry where completely clean air is required according to ISO 8573-1 Class 0 standard. Air dryer: - Brand: Kaeser - Model: TAH7 KRYOSEC - Single-phase 220V - Flow rate: 600 Liters/min. - Environmentally friendly refrigerant: R-513A - Weight: 24Kg - Plate heat exchanger: Made of stainless steel with low pressure drop. Pgjdpfxsz E R Dxo Angou - Integrated condensate drain: Equipped with an electronic condensate drain ECO-DRAIN as standard (does not lose compressed air during discharge). - Hot gas regulation: Prevents internal freezing when the unit operates at low air load.

Condition: used, Year of construction: 2019, operating hours: 43,002 h, functionality: fully functional, power: 26 kW (35.35 HP), volume flow: 294 m³/h, pressure (max.): 12.75 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Atlas Copco GA26VSD+FF screw compressor Pgodpez Nh Svjfx Angeu Inverter and dryer integrated 26 kW 12.75 bar 4.90 m3/min Year of manufacture: 2019 Operating hours: 43,002 h

Condition: good (used), 313 USED Proofer, proofing/cooling chamber. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Pgedeyi U Dzjpfx Angsu We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2008, volume flow: 2.61 m³/h, pressure (min.): 11 bar, KAESER ASD 32 screw compressor Pgedpfxjz Nz Uqe Angsu Motor: 18.5 kW Capacity: 2.61 m³/min Pressure: 11 bar COMPRESSOR IN FULLY OPERATIONAL CONDITION.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 32228379, cooling capacity: 110.6 kW (150.37 HP), type of cooling: air, overall weight: 1,340 kg, total width: 1,100 mm, total length: 3,225 mm, total height: 2,400 mm, We are offering this like-new Mitsubishi Electric MEHP-IS-G07 0112 air-cooled chiller, manufactured in 2026. Pgodpfx Asz N Hupengou Manufacturer: Mitsubishi Electric Model: MEHP-IS-G07 0112 Serial Number: 32228379 Confirmation Number: 250204110 Customer Order Number: 4501557791 Order Date: November 21, 2025 If you have any questions or require further information, please do not hesitate to contact us. The stated price does not include shipping costs.

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 1,700 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Electric car-bottom furnace for heat treatments on steels (normalizing, annealing, tempering, preheating, etc.) by Pagnotta Termomeccanica srl, Deruta, Italy. Maximum temperature: 1,100°C Usable loading dimensions: 1,250x800xh1,000 mm Capacity: 1,000 liters Pgsdjzxxkvjpfx Angeu CE Declaration of Conformity Used and refurbished machine with new electric heating elements The listed specifications are for informational purposes only; the photos depict similar machines. The furnace can be customized according to your specific heat treatment process.

Condition: good (used), Year of construction: 2000, Atlas Copco ZT30 Air compressor Serial: AIF065086 Pjdpfsvtcw Tjx Angogu 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank