Used Connection for sale (14,543)

Condition: used, Year of construction: 2014, pressure 170 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 405 mm stroke of ram 400 mm distance between table / ram 320-720 mm feed down max. 220 mm/sec Nwjdpfx Aj Advb Heg Ron feed bending max. 10 mm/sec feed up max. 220 mm/sec connected load 27 kVA total power requirement 18,5 kW weight of the machine ca. 13.600 kg

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Nodpezzxk Usfx Ag Rown Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: excellent (used), Year of construction: 2011, Clean air filter with rotary valve airlock Integrated pre-separator Negative pressure monitoring Fire extinguishing system with powder fire extinguisher PLC control Nodpfx Ao Adrxbeg Rown Machine recognition and damper control for 8 machines/dampers Filter material with BIA test, category “M” Chip disposal via rotary valve airlock Maintenance opening for raw gas area Motor power: 9.2 kW / 3-phase / 400 V / 50 Hz Intake nozzle: DN 300 mm Nominal volume flow: 4810 m3/h Maximum volume flow: 6000 m3/h Negative pressure at Vn: 2100 Pa Filter area: 40 m2 Residual dust content: < 0.1 mg/m2 - H3 Sound pressure level: 81 dB(A) Compressed air consumption: 60 Nl/pulse Compressed air connection: 6 bar Dimensions L x W x H = 3015 x 970 x 2,280 Weight: 802 kg Note regarding used machines: • Errors and omissions in technical specifications and prior sale are reserved. • Stated prices are ex works, excluding loading! • The machine has been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address and telephone number!)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,343 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, total height: 3,282 mm, total width: 4,039 mm, table width: 914 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 11,250 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 40, tool weight: 5,400 g, product length (max.): 4,827 mm, number of axes: 3, This 3-axis Haas VF-8 vertical machining centre was manufactured in 2015. It features an impressive X-axis travel of 1626 mm, Y-axis travel of 1016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 1626 x 914 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the Haas VF-8 vertical machining centre we have for sale. Contact us for further details. • CNC control • Haas CNC control, Classic generation • 15-inch colour LCD • USB port • Program memory: 1 MB • Remote jog handle with colour display • Axis travels and feed rates • Spindle nose to table distance: 102–864 mm • Rapid traverse (X/Y/Z): 15.2 m/min • Maximum cutting feed rate: 12.7 m/min • Worktable • Table dimensions: 1626 × 914 mm • Max evenly distributed table load: 1814 kgSpindle • Spindle taper: 40 taper • Maximum spindle speed: 8,100 rpm • Spindle power: 15 kW • Two-speed gearbox • Spindle cooling system • Spindle taper air blast • Rigid tapping • Tool changer • Side-mounted tool changer: 40 positions • Coolant and chip removal • Through-spindle coolant: 20 bar, 22 L/min • ACF additional coolant filtration system: 25 µm • Programmable coolant nozzle position • Coolant system with pull-out coolant tank • Screw-type chip auger • Probing and machining options • WIPS-R wireless workpiece and tool probing system • Tool length and radius measurement • Workpiece measurement and setting cycles • PMDS probe interface, internal power supply and wiring • Spindle orientation, coordinate rotation and macros • VQC Visual Quick Code conversational programming • HSM High-Speed Machining with look-ahead for machining complex contours using three-axis interpolation • 4AXD fourth-axis preparation, including connections and wiring. Rotary table not included • APC-READY automatic pallet changer preparation, including eight additional functions, macro support and wiring. Pallet changer not specified as included Nodpfx Age Adz Ils Rjwn Additional equipment • Ball screw thermal compensation • Fully enclosed machining area with sliding front doors and hinged side windows • Program memory lock • Compressed-air connection • EPFDM early power failure detection module • Automatic central lubrication • Machine lighting • CABCOOL CNC control cabinet cooling unit Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Under a service contract until the very end. Technical Specifications: Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Njdpe Ad Hiusfx Ag Rjwn Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate – Tapping block – Spare knife

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve Nedpfozy Dziex Ag Rjwn - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Note: Operator terminal and angle scale on the right side! Cutting length: 3200 mm Max. saw blade overhang: 100 mm Feed rate, continuously variable: 5-100 m/min; return speed: 130 m/min Saw carriage guided on round shafts Drive via gear and rack and pinion system Automatic cutting length detection via laser sensor on the saw carriage Quick-change system for main and scoring saw blade (ProLock) Cutting direction against the stop Motor: 13.5 kW, total connected load: 18 kW, rated current: 38 A Electronic cutting height adjustment (continuously variable) for the sawing unit Raising and lowering of the sawing unit by means of a positioning drive Dimensional measurement via non-contact magnetic measuring system Including nesting program Scoring saw adjustment, horizontal and axial, from the control panel via electric servo motors Scoring saw unit with pneumatic lowering, scoring saw motor 2.2 kW Manual pressure regulators for package clamps and pressure bar for sensitive materials Tilting table on the left: 2300 x 600 mm with air cushion Solid stop rail with 2000 mm 2 side tables, 2300 mm with air cushion Nwjdpe Adv Rusfx Ag Ren Material pusher, cutting length 3200 mm Feed rate: 25 m/min; return speed: 80 m/min Rear support table with 9 double roller tracks Package clamps, 6 pieces, 2-finger design, opening height 80 mm 3 veneer stops for cutting panels with protruding veneers Device for automatic positioning of the trimming position by the material pusher Lateral pressing device for workpieces from 20 to 1200 mm Modular control system with 24" TFT flat screen PC with Windows 7 Pro operating system With thermal label printer Availability: approx. January 2027 Location: North Rhine-Westphalia

Condition: used, Year of construction: 2004, grinding wheel diameter: 660 mm, overall weight: 15,000 kg, Vertical double-disc grinding machine Manufacturer: JUNKER Model: Saturn Year of manufacture: 2004 Control system: Siemens 840D The machines were used for the production of connecting rods. One machine is suitable for rough grinding, and the other for finish grinding. Technical data: - Grinding wheel diameter: 660 mm - Workpiece width: min. 5 / max. 180 mm - Max. workpiece diameter: 200 mm - Machine weight: approx. 15.0 t - Space requirements: approx. L 3.1 x W 4.0 x H 2.7 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Nedsxq R Haspfx Ag Rjwn Subject to technical changes, errors, and prior sale.

Condition: refurbished (used), Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software Nwedpfx Agozlbrvj Rsn - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Features: - Dust collector - Briquetting press Technical Specifications: Vacumobil JP 300: - Nominal airflow: 5,100 m³/h - Max. airflow: 6,000 m³/h - Pressure differential at nominal airflow: 2,700 Pa - Pressure differential at max. airflow: 2,200 Pa - Filter area: 28.0 m² - Suction inlet: 300 mm - Inlet height: 1,215 mm (centered) - Fan motor: 7.5 kW Nsdpfx Agj Ad Rnuo Rewn - Customer-supplied fuse: 32 A - Compressed air connection: 1" - Operating pressure: 4.5 bar - Compressed air consumption: approx. 120 NL per pressure pulse at a pulse duration of 150 ms - Sound pressure level: 75.0 dB - Weight: 900 kg CS3-12 briquetting press: Maximum throughput: 50 kg/h or 0.75 m³/h (depending on material) - Hydraulic pump motor: 3.0 kW - Agitator motor: 0.37 kW - Feeding screw motor: 0.75 kW - Customer-supplied fuse: 16 A - Briquette diameter: 65 mm - Weight: 780 kg - Feed hopper: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Footprint: 4,500 x 3,000 x 2,900 mm Available starting in June/July 2027

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 60 W, laser wavelength: 1,070 nm, type of cooling: air, warranty duration: 12 months, shaft length: 1,070 mm, Equipment: cabin, Laser engraving machine with 60-watt laser power (new) - 60-watt MOPA laser (enables color laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - very easy to operate - switch on and start - Fiber laser source with 60 watts for high-contrast and fast markings with extremely high resolution (see images) - Deep engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g., for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600mm (l x w x h) - Clamping surface with fastening threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approx. 180 x 180mm - expandable to approx. 300 x 300mm - incl. foot switch to start the engraving process Nwedpfx Agjfkgq No Rjn Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to commercial businesses. Delivery / Consulting / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Condition: used, Year of construction: 2001, spindle diameter: 40 mm, total width: 2,000 mm, total height: 1,900 mm, total length: 3,800 mm, overall weight: 3,500 kg, input voltage: 400 V, number of spindles: 5, input frequency: 50 Hz, No. 04556 Four-sided planer WEINIG Unimat 23 E Used, year of construction 2001 Spindles (bottom - right - left - top - bottom) All spindles Ø 40 mm, spindle motors with mechanical brake 1. Bottom spindle (surfacing spindle): 5.5 kW, with rebating device 2. Right spindle (jointing spindle): 7.5 kW 3. Left spindle: shared drive with right spindle (7.5 kW) 4. Top spindle: 5.5 kW 5. Bottom spindle: 11 kW Spindle speed 6000 rpm Working range Workpiece width with tool diameter 140 mm: 20 - 230 mm With aluminium planing heads, a working width of 260 mm is possible Workpiece height with tool diameter 163 mm: 8 - 120 mm Infeed table with jointing fence, length 2,000 mm Control and adjustment ATS positioning control with Siemens SIMATIC OP7 operator panel Left spindle: automatic positioning forward - backward Top spindle: automatic positioning up - down Motorised height adjustment of the feed, 1.1 kW adjustment motor with brake Mechanical digital readouts on the spindle adjustments Feed Feed motor 3 kW with brake Feed speed 6 - 36 m/min, infinitely variable via handwheel Serrated feed rollers, driven by cardan shafts Short workpiece package for processing short pieces Top pressure rollers, swing-away Axial adjustment of the feed rollers relative to the left spindle Pneumatic pressure system with pressure reducing unit, 3 pressure regulators with gauges on the control desk Pressure shoes and tables Pressure shoe before top spindle, swing-away Pressure shoe after top spindle with wooden insert Table plate with wooden insert at bottom spindle 5 Anti-kickback device on the infeed table Manual Waxilit pump for removing resin from the table Central lubrication points on the front of the machine Safety and noise protection Full soundproof enclosure with viewing window and interior lighting CE marking, BG-tested (wood dust tested) Chip extraction connection diameters 140 mm and 200 mm Power supply 400 V / 50 Hz Scope of delivery 5 planing heads, mounted on the spindles Various spare parts: feed rollers, spacer rings, drive belts, table inserts, operator tools Complete technical documentation Nedpj Afb Eajfx Ag Rjwn Transport dimensions approx. 3800 x 2000 x 1900 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Operating Hours PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. Nedpfj Afbz Uex Ag Rown The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar

Condition: used, Year of construction: 2014, operating hours: 10,000 h, machine/vehicle number: LC696, Used TM INOX brewery line 70 hl - Year 2014Technical Specifications & Performance DataThis second hand brewery processing line is configured for beer production, covering key stages from brewhouse operations and yeast handling through fermentation, filtration, cooling, utilities and laboratory control. The equipment inventory combines components manufactured between 2004 and 2014, with a main electrical cabinet dated 2012 and fermentation control equipment dated 2013.Brewhouse vessels: two 3.5 m3 mash boiling tanks, a 7.8 m3 malt filter tank, a 7 m3 hop boiling tank, a 7.2 m3 buffer tank and a 7.5 m3 whirlpool tankYeast section: 2.1 m3 yeast tank and 1.5 m3 sterile tankUtility capacity: steam generator rated at 1,500 kg/hFiltration: kieselguhr filter, sterile filtration unit and beer flow meteringAdvanced Automation & Control SystemsThe brewery includes dedicated electrical and control infrastructure for coordinated process management. A main brewery electrical cabinet, brewhouse command panel with software, pneumatic valve control board, pump control cabinet and mixer motor cabinet support automated process functions. Fermentation is supported by a dedicated command cabinet with software, while K&P heat control electronics manage thermal process control.This arrangement is suitable for industrial packaging and beverage production environments where stable control of pumps, valves, heating and cooling functions is essential to repeatable beer processing.Production Line Integration CapabilitiesThe installation is arranged as an integrated brewery process plant rather than a bottle filling and packaging line. It supports the upstream preparation of beer prior to transfer to compatible downstream bottling, canning or kegging equipment. Process pumps, stainless steel piping, steam distribution and glycol installation provide the essential connections between brewing, fermentation, filtration and cooling stages.Machine TypeManufacturer / ModelYearVarious EquipmentVELO yeast mill2004TankTM INOX hot water tank, 10 m32014TankMash boiling tanks, 3.5 m32004FilterTM INOX malt filter tank, 7.8 m32014TankTM INOX hop boiling tank, 7 m32014TankTM INOX buffer tank, 7.2 m32014 Nwsdpfx Ago Adtqfj Ron

Condition: used, functionality: fully functional, The Dibipack 4255 EV from Italdibipack is a small, microprocessor-controlled shrink wrapping machine. Automatic adjustment of the sealing temperature to the operating cycle guarantees stable and consistent seams. The shrinking process, combined with the simultaneous sealing of the film, is completed in a single operation. The product is placed inside the film and then drawn into the shrink chamber. The hood is now manually closed and held in place by an electromagnet. The automatic cycle then begins, during which the film is sealed around the product and shrunk, conforming closely to the product's shape. The shrinking is achieved by heating the air, which is simultaneously circulated by a fan. Once the process is complete, the hood opens automatically, and the finished, packaged product can be removed. For bagging products, the film can be sealed without subsequent shrinking. Up to 8 different work programs can be stored via the control panel. Parameters such as shrink temperature, shrink time, and the sealing time of the sealing strip can be easily and conveniently adjusted on the operating panel. An electronic counter informs you about the product flow. A mobile base, which makes the Dibipack 4255 EV even more flexible, is available as an accessory. The Dibipack 4255 EV can be used to process PVC, PE, PO, LDPE, OPP, CP films, all sealable films, as well as micro-perforated and food-grade films. The machine has undergone a thorough inspection in our in-house workshop and is fully functional. Upon request, a video of the machine can also be sent. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment / inspection & expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. Technical data: Max. output per hour: 240-360 pieces Power connection: 230 V - 1 phase Rated power: 3 kW Working table height with base: 920 mm Sealing frame L x W: 550 x 420 mm Max. product height: 200 mm Machine dimensions, L x W: 1,235 x 750 mm Max. film width: 600 mm Max. film roll diameter: 250 mm Machine weight: 87 kg Condition: used, fully functional Further details: Up to 8 different work programs can be stored. Microprocessor-controlled processes. Energy-saving standby function. Hood opening system with gas spring. Electronic counter. Quick and easy adjustable film unit for different product sizes. Processing of different films. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Njdo Afdmyopfx Ag Rjwn

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Nwjdpfxo Afxi Ns Ag Rsn Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: used, Year of construction: 2011, operating hours: 69,103 h, functionality: fully functional, machine/vehicle number: NT430111102, travel distance X-axis: 750 mm, travel distance Z-axis: 1,635 mm, overall weight: 26,500 kg, For sale is a CNC turning and milling center from the renowned manufacturer Mori Seiki, type NT4300DCG/15000S, manufactured in 2011. The machine features a dual spindle, a milling spindle, and extensive technical equipment, making it suitable for demanding turning and milling operations. Technical specifications: Manufacturer: Mori Seiki Type: NT4300DCG/15000S Year of manufacture: 2011 Serial number: NT430111102 Machine number: 1216 Travel distances X/Z: 750 / 1,635 mm Nwsde Afx Alspfx Ag Ron Max. turning diameter: 750 mm Electrical connection power: 69 kVA Machine weight: approx. 26,500 kg Control system: Type F31IA5 Equipment and accessories: Dual spindle Milling spindle 10-position tool turret, partially with driven tools Three- and four-jaw chucks Internal tool measuring system Renishaw HPRA Chip conveyor, manufacturer Enomoto Coolant filtration system with band filter, manufacturer Knoll, type FKA500, year of manufacture 2012 Separate cooling unit, type CLPB, serial number 159145 Siemens control system, type Simatic Two workbenches with 10 and 12 drawers respectively Partition and lighting system Extensive accessories with digital and analog measuring instruments, hand tools, and machine accessories Sales offer: A powerful CNC machining solution with extensive equipment for industrial production. The machine is offered including the described accessories. Attractive offer – flexible & hassle-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Feel free to contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: used, functionality: fully functional, For sale: KOCH TECHNIK MIKO vacuum conveyor for transporting plastic granules. The device is designed for the automatic feeding of injection molding machines, extruders, and other processing machines. Data from the nameplate: * Manufacturer: Werner Koch Maschinentechnik GmbH * Model: MIKO * Serial number: GD1576 * Power supply: 230 V * Date of manufacture: 12-16 * Country of manufacture: Germany Equipment: * Integrated suction unit. * Control panel with digital display and time adjustment. * Transparent tank for observing the material. * Side connection for connecting the transport hose. * Pneumatic solenoid valve. * Lid with snap-on fasteners. * Mounting base. * Power cord with plug. Njdpfx Ags Afy Tgj Rewn Condition: used, visible signs of wear as shown in the photos.

Condition: used, Year of construction: 2020, Overview Compact bottling line for craft beer, built in 2020 by CDA (Chabot Delrieu Associés, France). The B-HOP monobloc labels, fills and caps glass bottles in one stainless-steel frame, fed by a rotary infeed table and discharging onto an outfeed table. Delivered with format parts for 75 cl bottles and additional tooling for 33 cl long-neck bottles; both formats are capped with 26 mm crown caps. Output up to 700 bottles/h. The line has been dismantled and is stored ready for transport. Technical data - Year of manufacture: 2020 - Output: up to 700 bottles/h - Product: beer - Containers: glass bottles, 75 cl and 33 cl long neck - Functions: labelling, filling, capping - Capping: crown cap 26 mm, for both the 75 cl and the 33 cl format - Electrical supply: 220 V / 16 A, 2 kW - Compressed air: max. 28 m³/h at constant 6 bar, compressor tank 200 L - Product inlet: DN40 Macon male connection at the pump inlet - Footprint: approx. 4,118 x 2,427 mm, plus door and cabinet clearance (approx. 3,254 mm deep) - Height: approx. 2,450 mm; conveyor height approx. 925 mm - Control: touchscreen HMI Scope of Delivery - Labelling, filling and capping monobloc | CDA | B-HOP | 2020 - Rotary infeed table | CDA | diameter 1,000 mm, standalone | 2020 - Outfeed table | CDA | 2020 Nsdpo Afkq Eofx Ag Rewn - Format parts for 75 cl bottles - Additional tooling for 33 cl long-neck bottles, including fixed-plate roller Condition Dismantled and stored. Inspection by appointment. Availability Available immediately. Location: France.

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Operating hours: 45,447 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Njdpfo Af Rt Eex Ag Rewn Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Nwsdpfx Ags Af Rvrs Ron Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: new, Year of construction: 2025, Working width: 510 mm Planing height: 250 mm Nwsdegqwx Hspfx Ag Ron Planing cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: digital display Feed rate: 8 / 16 Infeed roller: steel Pressure bar: segmented Outfeed roller: steel Table rollers: no Motor power: 7 kW Dust extraction connection: 120 mm Machine length: 800 mm Machine width: 900 mm Weight: 650 kg

Condition: used, Year of construction: 1985, machine/vehicle number: ARP-250, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, stroke length: 125 mm, total length: 2,500 mm, total width: 3,000 mm, total height: 4,500 mm, overall weight: 25,000 kg, Single-column (C-frame) eccentric press Ivo Lola Ribar ARP-250, 2,500 kN, for sale. The press has been completely overhauled, is regularly maintained, is in very good mechanical and functional condition, and is ready for immediate operation. Inspection under power is possible by appointment. Technical data (as per nameplate): Nominal force: 2,500 kN (250 t) Stroke: 40–190 mm, adjustable Ram adjustment: 125 mm Strokes per minute: 40 min⁻¹ Max. sheet thickness: 24 mm Distance table–ram (stroke down): 300–425 mm at 190 mm stroke, 375–500 mm at 40 mm stroke Year of manufacture: 1985 Equipment: Hydraulic die cushion Pneumatic clutch-brake T-slot table Central lubrication Air tank with service unit Separate electrical cabinet with control Dimensions and connection (approx.): Nedpfxe Af Na Aj Ag Rswn Table size: approx. 1,380 x 880 mm Ram face: approx. 1,200 x 800 mm Table height above floor: approx. 800 mm Drive power: approx. 22 kW Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 24 t Dimensions (L x W x H): approx. 2.5 x 3.0 x 4.5 m Location: Slovenia Delivery terms: EXW Price: EUR 22,000 net

Condition: good (used), Year of construction: 2015, machine/vehicle number: 3131151803, Offer 26255 Technical specifications: Nedpfe Af Igxex Ag Rown - max. working width 1350 mm - max. cutting capacity St 40 3 mm - cutting angle 2.30° - motorized back gauge 20 - 750 mm - sheet metal lifting, pneumatically assisted - rear guard with light curtain - front angle stop + support arms - stroke rate depending on cutting length up to 42 strokes/min - pneumatic connection 6 bar - drive 400 V / 7.5 kW - table height approx. 850 mm - electric foot pedal - space requirement including back gauge and rear guard, without front support arms - approx. W 1950 x H 1250 x D 1950 mm - weight approx. 1800 kg

Year of construction: 2026, condition: new, KEY Technology Optyx – Optical Sorting Machine Brand: KEY Technology Model: Optyx Year of manufacture: June 2026 Type: Optical sorting machine Electrical connection: 400 V Motor: 400 V / 4.85 A Frequency: 50/60 Hz Nodpfx Ae Af Nmgsg Rjwn Sales Description For sale: a NEW KEY Technology Optyx optical sorting machine, manufactured in June 2026. The Optyx is designed for the optical inspection and sorting of products within the food industry. Using optical detection technology, the system can monitor products and remove any items that deviate from specifications or contain unwanted components from the product stream. The machine is constructed from stainless steel and equipped with protective guards and safety features. Its industrial-grade design makes it suitable for integration into professional production lines. The KEY Technology Optyx is ideal for applications where product quality, food safety, and consistent sorting are essential. IQF Spiral Freezer – 3,600 kg/hour Complete industrial IQF spiral freezing line for the food industry A complete industrial IQF spiral freezing system, designed for the continuous freezing of various pre-cooked cheese and vegetable products. The system has a capacity of approximately 3,600 kg per hour and cools products down to a core/exit temperature of approximately -18 °C, depending on the product and process conditions. The spiral freezer features a hygienic design, a stainless steel conveyor belt, and an efficient air circulation system to ensure uniform heat transfer and product freezing. Key features and specifications * Type: SF-375/100-35 spiral freezer * Capacity: approximately 3,600 kg/hour * Suitable products: mozzarella and other cheese products, hash browns, spinach bites, nacho cheese nuggets, and chili cheese nuggets * Residence time: approximately 45 minutes * Product infeed temperature: maximum approx. +70 °C, depending on the product * Product outfeed temperature: approximately -18 °C * Conveyor belt width: 1,000 mm (effective) * Total conveyor belt length: approximately 700 meters * Number of spiral tiers: 35 * Cooling system: ammonia (NH₃), pumped system * Cooling capacity: approx. 600 kW absorbed power, with approx. 900 kW installed capacity * Defrost system: sequential hot-gas defrosting * Drive system: direct drive principle * Construction: fully welded and insulated enclosure * Control system: Siemens PLC with a 22-inch touchscreen * Frequency drives: Danfoss * Electrical components: Schneider Electric Configuration and included systems The installation is equipped with a complete CIP (Clean-in-Place) system, including a belt washer, spray bars, and rotating nozzles for cleaning the spiral and the interior space. The system features a foam/pump unit and connections for two different cleaning agents, with automatic switching. Furthermore, the installation includes a comprehensive control system, comprising an electrical cabinet, cabling, safety sensors, emergency stop mechanisms, and communication interfaces for integration into the production line. Application This spiral freezing system is suitable for industrial producers of frozen snacks, cheese products, and vegetable products who require high processing capacity and an integrated solution for freezing and cleaning. Note: The final capacity and freezing time depend on the product, product dimensions, infeed temperature, and the desired discharge temperature.