Used Compressors Unit for sale (33,584)

Condition: ready for operation (used), Siemens 1FT5072-0AC01-2-Z Permanent Magnet Motor Z = H40, serial number as per photo, professionally fully overhauled and tested with 12-month warranty, 100% functional, delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately. Nwsdpfx Ahexlwqbskjk

Condition: ready for operation (used), Siemens 1FT5073-0AF71-1 - Z AC-VSA motor Z= G44 + K31 + K84 + K93 + Q10, serial number: YFM311220103005. The motor was completely overhauled by Siemens and then stored for a long period. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Nwedpsi D Svaefx Ahkjk

Condition: ready for operation (used), Bosch stator for SE-LB3.000 servo motor, serial number 471, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdpozt H D Hofx Ahkowk

Condition: used, functionality: fully functional, mileage: 385,244 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. Nedpezt H Dtsfx Ahkewk High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, mileage: 533,862 km, power: 375 kW (509.86 HP), first registration: 04/2023, fuel type: diesel, empty load weight: 8,451 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: VEB, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 315/70 R22.5, rear tire size: 315/70 R22.5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, parking heater, spoiler, truck registration, | Volvo FH 500 | XL cab, | Lane departure warning system, cruise control, sunroof | EURO6, I-Shift, VEB+ | Refrigerator | Hands-free system, multifunction steering wheel | Auxiliary heater, heated seats | Electric windows, electrically adjustable and heated mirrors | Radio | Subject to errors, typos, and prior sale. Njdpfx Ahozt R Snjkowk

Condition: used, Electric chain hoist crane DEMAG, type DCM PRO -125 1/1 H2.8 V8/2, Manulift Year of manufacture: 2004 Load capacity: 125 kg Hook travel: 2.8 meters Lifting speed: 8 m/min Fine lifting speed: 2 m/min Distance from suspension to load hook: 630 mm Power supply: 400 volts, 50 Hz 1 load chain = 125 kg Manulift hand control directly on the crane hook Weight: 21 kg Nwsdpfezugnujx Ahkek Good condition

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Nsdpfx Ahszukkgjkowk Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Nwsdpfszui U Rsx Ahksk Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: ready for operation (used), Fanuc A06B-0128-B175 AC servo motor, serial number: C989C3562, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwjdpfx Aszt Uv Rehkok

Condition: used, tank capacity / l working pressure / bar feed pressure / bar weight / kg Nedpfx Ahjzdvfzjkewk required space / m

Year of construction: 2003, condition: used, tank capacity 160 l Njdpfx Aen Tvg Eohkjwk feed pressure 160 bar weight / kg

Condition: new, Indramat MDD0718-N-030-N2SD-095PA1 permanent magnet motor without encoder, serial number 18968, unused, 100% functional, scope of delivery as shown in the photos. Nwjdpfeztuk Ijx Ahkjk

Condition: new, Indramat MDD071B-N-030-N2S-095GB1 Permanent Magnet Motor without encoder, serial number 09718, unused, 100% functional, scope of delivery as shown in the photos. Nodpfx Ajztuk Ujhkswk

Condition: used, Year of construction: 2012, Softforming edge banding machine with panel cutting device Manufacturer: Elwood Year of manufacture: 2012 Technical data: - Adhesive application system with slotted nozzle - Compatible with EVA and PUR adhesives - Meler adhesive melting and application system - Electronically controlled adhesive temperature and melting time - Panel thickness: 10-60 mm - 2 profiling milling units - IR heating lamps for material preheating - Spray device for release agent Nedszuyi Sopfx Ahkewk - Pressing zone with heated tower pads (can be replaced with pressing rollers) - Edge band magazine - Front and rear trimming units - Top and bottom flush trimming units for longitudinal edge overhang (2 at the top + 2 at the bottom) - Top and bottom polishing units - Computer control for quick, easy and precise adjustment of the machine's main functions and units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press Nedozu Aibspfx Ahkewk

Condition: ready for operation (used), Siemens stator for 1FK7042-5AF71 servo motor, serial number YFV343660309002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwsdpfszuu A Hsx Ahkok

Condition: new, Type: Linear unit / robot track Part number: FA2495034 Condition: New, unused Linear unit length: approx. 3 x 5 m Guide rail: 1 piece, length approx. 6 m Rail design: for outdoor use Screw pumps: 2 pieces Nsdpezuag Defx Ahkjwk Energy chain: 2 pieces Cable sets: 2 x KUKA CON XD30 H24B Cable length: 35 m Anchors: 3 x Fischer/KUKA Highbond Dynamic FHB-A dyn 16x125/25 Additional equipment: connecting elements, brackets and other mounting accessories

Condition: used, mileage: 231,300 km, power: 375 kW (509.86 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Lowliner ---- ----* Connectivity Board Module (Rio Box) * MAN EasyStart (rolling lock) * MAN EVBec (electronically controlled exhaust valve brake) * MAN Media System Advanced Navigation 7 inch * Front axle air suspension * Rear axle differential lock * Traction control (ASR) * Rear axle air suspension * Anti-lock braking system (ABS) * Emergency brake assist (EBA) * Retarder * Electronic Stability Program (ESP) * Disc brakes * Full emergency brake assist * Driver attention warning MAN AttentionGuard * Electric sliding/lifting roof, glass version * Stand-alone air conditioning unit, electric * Battery main switch * Lane departure warning (LDW) * Cab L (long) * External sun visor, transparent * Exterior mirrors electrically adjustable and heated * Air horns on cab roof * Roof and side spoilers on cab * Cab GX – the ultimate (wide, long, extra high) * Central locking with remote control * Immobiliser (transponder) * Automatic transmission * MAN Idle Speed Driving transmission function * MAN TipMatic 14 27 DD transmission with retarder * Automatic climate control * Additional hot-water heater * Heated driver’s seat * 480-liter fuel tank * 480-liter fuel tank * Fog lights * Headlight cleaning system * Engine version Euro 6, E * Engine version with AdBlue * Air-suspended driver’s seat * Cornering lights * High beam assist * Lower bunk * Upper bunk * Adaptive cruise control (ACC) with stop-and-go function * Driver comfort package Nwodpfxew Sp R Io Ahkok * Electric front windshield blind * Refrigerator in drawer under bed * EBS * Without spare wheel ----Sale to business customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions exclusively apply! We are happy to provide you with a leasing or financing offer.

Condition: like new (used), controller manufacturer: ABB, ABB 3HAC029818-001 ABB Type Designation: 55x40x30 Catalog Description: DSQC 663 Drive Unit Njdpfx Aezvyr Aehkswk

Condition: used, mileage: 609,220 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Touchscreen radio with Bluetooth * Integrated navigation system * Auxiliary heater * Auxiliary air conditioning * On-board computer * Multifunction steering wheel * Refrigerator * MAN sound system * 2 sleeping bunks * Heated seats ----* Adaptive cruise control with distance monitoring * Distance warning system * Hill start assist---- * Rear axle differential lock * Leaf/air suspension * Retarder Nwedpevhwa Ssfx Ahksk ----Internal vehicle number: 7932---- Errors and prior sale reserved. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, mileage: 635,357 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2024, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Touchscreen radio with Bluetooth * Integrated navigation system * Auxiliary heater (parking heater) * Parking air conditioning * On-board computer * Multifunction steering wheel * Refrigerator * MAN sound system * 2 sleeping bunks * Heated seats ----* Adaptive cruise control * Distance warning system * Hill start assist---- * Rear axle differential lock * Leaf/air suspension * Retarder ----Internal vehicle number: 7913----Errors and prior sale excepted. Nwjdpfsvht Sqox Ahkjk WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, mileage: 155,650 km, power: 375 kW (509.86 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2025, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, MAN TGX TG3 18.510 - Retarder - Refrigerator - 1,100-litre fuel tank capacity - 2 sleeper bunks - Rear axle differential lock - Stationary air conditioning - Lane departure warning system - Hydraulic system preparation - Front axle tyres: 385/55 R22.5 - Rear axle tyres: 315/80 R22.5 Nedpfx Ajw Iatfshkowk - Unladen weight: 8,053 kg - Technically permissible gross weight: 20,500 kg - Next MOT due: - Next safety inspection due: Subject to errors and prior sale. Internal vehicle number: 6597 WhatsApp support available! If you have any questions about the vehicle or need further information, simply contact us via WhatsApp. WhatsApp WhatsApp

Condition: used, Technical data: Njdpfx Ahsxxmz Nekjwk Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used

Condition: used, mileage: 576,452 km, power: 338 kW (459.55 HP), first registration: 05/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 18.460 TGS tractor unit 4x4 + Hydrodrive with hydraulic pump !!! 5 identical tractor units in stock !!! Suspension: leaf-air Wheelbase: 3.70 m Payload: 10,522 kg Equipment: - Engine brake - Digital tachograph - Radio-navigation-media-Bluetooth-AUX - Electric windows Nwsdpfxeyg S Nps Ahkok - Sunroof - Sun visor - Cool box - Multifunction steering wheel - Auxiliary heater - Heated seats - Hydraulic pump We are also happy to assist you with financing/leasing options through our partners. All information given without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 618,145 km, power: 338 kW (459.55 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab: Type L (long) 1 * Air-suspended cab mount * Mechanically operated tilting roof * Air-suspended driver's comfort seat, heated, with lumbar support * Static co-driver's seat with storage compartment * Sleeper bunk with mattress and storage space * Eberspächer auxiliary air heater * Air conditioning with automatic control * Multifunctional steering wheel * Leather steering wheel * Central locking with remote control * Electric windows for driver and co-driver * Sun visors and curtains * Interior design "Urban Concrete" ----Infotainment & Connectivity MAN Media Truck Advanced * Navigation Europe (SD) * DAB+ digital radio * Bluetooth / hands-free system * Voice control * USB / AUX * RIO Box (Connectivity Board) * Remote download of digital tachograph data ----Lighting & Electrical System LED daytime running lights * Halogen twin headlights H7 * Cornering lights * Automatic low beam with light sensor * 2 work headlights on the cab roof * Rotating beacon lights, yellow * Step light at the entrance * Additional interior lighting, red/white ----Engine & Exhaust Engine: MAN D2676LF52 1 * Power: 460 hp (338 kW) 1 * Torque: 2,300 Nm 1 * Emission standard: Euro 6 SCR 1 * Common-rail injection * Exhaust aftertreatment with AdBlue * Flame-starting system * Fine dust and pollen filter ----Transmission & Drivetrain Transmission: MAN TipMatic 14-speed DD with retarder 1 * Transmission software: Profi (on-road use) * Differential lock, rear axle * EfficientRoll * Rocking function * Auxiliary drive MAN 650P * Axial pump MEILLER * Hydraulic system MEILLER for tipper semi-trailer (275 bar high pressure) ----Chassis & Brakes Front axle suspension: Air suspension, 8.5 t * Rear axle suspension: Air, 13 t * ECAS air suspension system * MAN BrakeMatic * Disc brakes, front and rear axles ----Driver Assistance Systems Emergency Brake Assist 2 (EBA2) * Lane Guard System IV * Tire inflation connection * Emergency brake signal (ESS) * ABS * ASR * ESP * Electronic speed limiter 90 km/h * Cruise control * Adaptive Cruise Control (ACC) with Stop & Go * MAN EfficientCruise 2 * EBA2 Emergency Brake Assist ----Semi-trailer operation & structure Semi-trailer coupling: JOST JSK 42 1 * Coupling height: 185 mm * Saddle plate dimension: 585 mm * Work platform with steps and handrail * Hydraulic couplings ARGUS HDK * Oil tank, aluminum, 200 l, left * MEILLER hydraulic system for tipper semi-trailer, high-pressure system 275 bar/low-pressure system 150 bar * Coupling system ARGUS HDK DN 20, screwable for hydraulic connection, high-pressure system ----* Tire dimension, front axle: 315/80R22.5 * Tire dimension, rear axle: 315/80R22.5 * Fuel tank: 390 liters * AdBlue tank: 80 liters * Technically permissible total weight: 20,500 kg * Tare weight: 7,686 kg * Overall length: 5,983 mm * Wheelbase: 3,600 mm * Next inspection due: 10.2026 Nsdezv Dhujpfx Ahkjwk ----Vehicle number: 11902----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We will gladly assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. We can offer the following services for an additional fee: ----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM