Used Cambio Peeling for sale (184)

Condition: ready for operation (used), D-15454-Crypto Peerless Itsdpfx Aheh Hrg Hebjn Cripto Peerless CC14, Carborundum potato Peeler 10 kg

Condition: reconditioned (used), B., VK26M (model series 1974) with motorized discharge table: - Main machine - Infeed table (driven) - Discharge table - Control cabinet Including infeed and discharge table, workshop inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed = 235 RPM - Rotor opening = 65 cm - 30 kW motor, speed 1500/min Itodpfofn Iu Iex Ahben - Speed: 17-42 m/min - 3 m or longer (wood length) Dimensions (without infeed and discharge table) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Discharge table (motorized table): 3170 mm x 1000 mm x 1300 mm RENOVATION: Pos 1: 1 unit: Machine disassembly, washing, sandblasting, priming, and painting, repair, assembly Pos 2: 1 unit: Material - knife axle bearings on the rotor, new bearings and seals (if required) Pos 3: 5 units: Miscellaneous material: V-belt for rotor drive Pos 4: 1 unit: Gear oil Pos 5: 1 unit: Material: Abrasives + paints Pos 6: 4 units: Valonkone peeling knives Pos 7: 4 units: Valonkone pre-separators Pos 8: 1 unit: Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor input with start for 4 kW geared motor output Main starter Emergency STOP

Condition: good (used), Lubricating bolt for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple, bolt crane bolt, lubricating bolt -Grease bolt: crane bolt type 75x145 M48 Isdpfxev Ilc Ie Ahbstn -Shaft: Ø 59.6 mm .: 1045 1707 -Number: 10x bolts available -Price: per piece -Dimensions: Ø 80 x 150 mm -Weight: 3.4 kg/piece

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Iodpfxoihf Two Ahbstn Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Year of construction: 2026, condition: new, functionality: fully functional, Universal testing machine PM10 (10 kN) – Complete system including software For sale is a versatile universal testing machine PM10 with a maximum testing force of 10 kN. The system is characterized by its flexibility and efficient stand-alone operation. The machine is ready for use, including evaluation electronics and basic software for comprehensive data analysis. Technical data & performance features • Maximum testing force: 10 kN (including matching load cell) • Crosshead travel: 700 mm • Testing space / installation space: 400 mm • Testing speed: 1 – 500 mm/min • Return speed: 700 mm/min • Path resolution: 0.01 mm • Overall height: 1,230 mm • Weight: approx. 85 kg Itsdeyc U Ugspfx Ahbon Highlights & operation • Flexible stand-alone operation: Quick tests can be performed directly on the machine via a numeric keypad, completely without a PC. • Powerful basic software: Machine control, recording of curves, and detailed data storage when connected to a PC. • Open data interface: Easy export of raw data for further processing in your own programs (e.g., Excel). Scope of supply • Universal testing machine PM10 • Load cell 10 kN • Integrated evaluation electronics • Basic software for control and evaluation Optional services & accessories (upon request) • Service: Delivery, professional installation, and commissioning on site • Certification: DAkkS or factory calibration according to DIN EN ISO 7500-1 • Extensive range of clamping devices: Pressure plates, bending and shear devices, wedge and scissor clamps, peeling and screw clamps, as well as pneumatic or hydraulic clamping devices. The machine is available immediately. Please contact us for an individual offer including the appropriate accessories for your testing requirements!

Condition: good (used), Rope protection cage, for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, bridge crane, hall crane, assembly crane, flange hub, bearing cover -Bearing cover: Type 220x115x42 Isdpfjv Imahjx Ahbetn -Bolt circle: Ø 180 x 13 mm -Number: 8x bearing caps available -Price: per piece -Dimensions: Ø 220 x 42 mm -Weight: 5.7 kg/piece

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Itsdpfxsixqg No Ahbsn Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: Root peeler AE-800, General: The root peeler is an advanced device designed specifically for efficiently cleaning and peeling root vegetables such as potatoes, ginger, and carrots. Additionally, by using a soft brush attachment, it can also clean delicate fruits with thin skins. This machine stands out due to its high efficiency, advanced automation, and excellent peeling results. It significantly enhances production efficiency and reduces labor costs by swiftly and effectively removing skins from vegetables. The root peeler employs various peeling techniques, including steam peeling, scrubbing, and brushing. These methods ensure thorough skin removal while maintaining the quality and integrity of the produce. The machine's versatility allows for adjustments in peeling thickness and methods, accommodating different sizes and varieties of vegetables. Key Features: • Efficient Peeling: Equipped with high-speed rotating brushes and impact mechanisms, it ensures rapid and effective skin removal. Itedpfot Av Igox Ahbjn • Multifunctional Use: Beyond peeling, the machine can clean, grade, and slice vegetables, catering to various processing needs. • Adaptability: It easily adapts to different vegetable sizes and varieties, with simple adjustments. • User-Friendly Operation: Featuring automated controls, the machine is straightforward to operate, understand, and manage. • Labor-Saving: The use of this peeler drastically reduces the need for manual labor, boosting overall production efficiency. • Hygienic and Eco-Friendly: Constructed from food-grade 304 stainless steel, the machine meets food hygiene standards, is easy to clean, and environmentally friendly. Regular cleaning and proper handling are necessary to ensure the equipment operates smoothly and safely, minimizing the risk of accidents from improper use. Overall, this root peeler is a robust and versatile solution for the efficient processing of root vegetables and soft-skinned fruits, making it an indispensable tool in any food processing setup.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Iedpfxjyc U Dbo Ahbstn Displacement resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Load cell: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead travel: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: approx. 380 kg Resolution: 0.01 mm Testing speed: 0.03-1000 mm/min Return speed: 1000 mm/min Load cell: 50 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a "quick test" even without a PC. For tests that require data storage and recording of the curve, we offer the basic software, which allows you to control and evaluate the test. This enables you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Iodpfx Aed R Dp Ejhbjtn Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending devices, shear devices, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: good (used), Lubricating bolt for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple, bolt crane bolt, lubricating bolt -Grease bolt: crane bolt type d=90x2 8 M48 -Shaft: Ø 69.5 mm .: 1031 4143 -Number: 5x crane bolts available -Price: per piece Itedov Iknijpfx Ahben -Dimensions: Ø 90 x 248 mm -Weight: 6.9 kg/piece

Condition: good (used), Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device Isdpsb A Hdijfx Ahbetn -Diameter: Ø 63 mm -Weight: 0.6 kg

Condition: good (used), Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device Itsdpfx Aeb A H A Rehbsn -Diameter: Ø 32 mm -Weight: 0.4 kg

Condition: new, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, loading space length: 73,000 mm, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (Tel. No. ...). S-Way AD190S40/P 4x2 box body with tail lift. Ijdpfoyfvyiox Ahbotn EURO VI E emission standard, speed limiter set to 90 km/h, cab rear wall without window, plastic bumper, cab fittings in black, AD MY LOW ROOF CAB, standard cab roof insulation, flat white roof, electronic immobilizer and second vehicle key, rear wall storage compartment with two sections, dashboard design: plastic with black inlays, 10-inch instrument cluster, digital tachograph 4.1, air suspension on rear axle, generator 2160W (24V x 90A), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, moderate climate execution, standard specification, air compressor 1-cylinder 352cc, chassis frame in grey, standard complete tractor-trailer brake, steel air tanks (number depends on suspension and trailer version), front axle stabilizer, exhaust pipe to the left, batteries 180 Ah (Heavy) / 170 Ah (Eurocargo, recommended for tail lift and/or PTO use), standard chassis component positioning, standard ride height, rear frame overhang: 2208mm, fuel tank 290L aluminum, AdBlue tank 50L, ECO NORMAL MODE, standard gearbox mode, 4G Connectivity Box incl. TCO service contract, RADIO with Bluetooth, DAB+, 7-inch display, tire pressure monitoring system (TPMS) with internal sensors, 4 DIN slots storage above, gearbox software ECO-Roll (coasting function), standard engine configuration Cursor 9, adaptive cruise control (ACC), lane departure warning system (LDWS), driver drowsiness attention warning, hill start assist (Hill Holder) for improved start-up on inclines, electronic stability program (ESP), reverse monitoring system with camera, blind spot monitoring system (BSIS) on the right, intelligent speed assistant (ISA), NO HIGH WAY ASSIST, moving off information system (MOIS), advanced emergency braking system (AEBS), pneumatic parking brake, wiring for breathalyzer immobilizer (ALC), CAMBIO 12TX 1850 TD, tires: 315/70R22.5, mechanical roof hatch, first aid kit, fog lights with cornering/turning function, air suspension for driver cab, exterior mirrors electrically adjustable and heated, LED headlights at the front, black decorative foil on doors, transparent sun visor mounted externally above cab, leather steering wheel, sun blind for driver's side window, pneumatic horn behind bumper, fully automatic air conditioning, HI-Comfort driver's seat: multi-adjustable, air-suspended, integrated headrest and height-adjustable seatbelt, lumbar support, 3-step heating/cooling, luxury co-driver seat: 4-way adjustable, air-suspended, integrated headrest and seatbelt, heated, lumbar support, reinforced parabolic spring on front axle, electrical pre-installation for tail lift according to VEHH standard, front axle weight variant: 8,000 kg / rear axle: 11,500 kg (technically possible: 13,000 kg), heavy-duty anti-roll bar rear axle D 60mm, two wheel chocks, cab-mounted battery master switch, battery charging socket, terminal clamps, rear axle ratio: i = 3.08, 24V trailer socket, 15-pin, ...

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ijdpfxevzx Auo Ahbotn Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Year of construction: 2026, condition: new, The IMIZUNI OB-2R/4800 peeling machine is compatible with peeling machines from various manufacturers that use the dry peeling method for onions. The precision of its construction and its robust design made of stainless steel not only provide production advantages but also make the machine aesthetically pleasing and easy to clean, thus facilitating production while maintaining all hygiene standards. Itsdpfx Ahoh Hbfujbon Peeling machine capacity: with two operators positioning the onions, the capacity is 100-120 onions per minute; with four operators, the capacity is 120-180 onions per minute. We recommend purchasing the auger inspection table shown in the picture for use with the peeling machine.

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips. Itodpfx Aeydazuohbjn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KPP400, General: The Potato Washing and Peeling Machine is an advanced piece of equipment specifically engineered to clean and peel potatoes efficiently in large quantities. This machine transforms the labor-intensive and time-consuming task of potato preparation, making it indispensable in the food processing sector. Key Features and Benefits: Efficient Cleaning and Peeling: The machine uses rotating brushes or abrasive surfaces to effectively remove dirt, debris, and the outer skin of potatoes. Its design ensures a thorough cleaning and peeling process, which minimizes waste and maximizes the yield of usable potatoes. Time and Labor Savings: By automating the washing and peeling processes, this machine significantly reduces the manual effort and time required. It enables food processing facilities to handle large volumes of potatoes swiftly and consistently, enhancing overall productivity. Versatility in Potato Types: The machine is adaptable to various types of potatoes, accommodating different sizes and varieties. It can be adjusted to handle different shapes and ensure uniform peeling, regardless of the potato's size or texture. Gentle on Potatoes: Despite its powerful and efficient operation, the machine is designed to be gentle on potatoes, preventing damage or bruising during the cleaning and peeling process. This ensures that the final product retains its quality and appearance. Water Conservation: Many modern Potato Washing and Peeling Machines are equipped with water-saving features, utilizing efficient water circulation systems to minimize water wastage during the cleaning process. This eco-friendly Itedpjt A Ampsfx Ahbsn approach is crucial for sustainable food processing practices. Conclusion: The Potato Washing and Peeling Machine revolutionizes the processing of potatoes in commercial kitchens and food processing facilities. Its efficiency, versatility, and waste-minimizing capabilities streamline the potato preparation process and contribute to sustainable and efficient food production, meeting the needs of contemporary food processing industries.

Year of construction: 2025, condition: new, functionality: fully functional, POTATO KNIFE PEELING LINE 500KG/H: ROOT PEELER RP800 Itsdox Ex Dlspfx Ahbsn The Vegetable & Root Washer/Polisher is designed for effective cleaning and optional peeling of root vegetables like potatoes, carrots, and ginger. With durable soft or hard brushes, it can polish or peel raw produce efficiently. The machine features a sleek, rust-resistant stainless-steel design, high cleaning volume, low energy consumption, and user-friendly, continuous operation. Its long-lasting nylon cord brush rollers ensure durability and wear resistance. CONVEYOR AND KNIFE PEELING MACHINE CKP500 The Potato Washing and Peeling Machine with Washing Elevator is designed to streamline potato processing in production lines. The washing elevator lifts and soaks the potatoes, softening and cleaning the surface soil. Once ready, it automatically feeds them into the peeler, where the potatoes are efficiently washed and peeled. This automated process ensures continuous operation, reduces manual work, and prepares potatoes quickly for the next stage of production. Soaking Elevator SO2400-S The Prewashing Machine SO2400-S with Elevator is a durable, industrial solution for efficiently pre-cleaning root vegetables like potatoes. It streamlines the first washing stage and uses an integrated elevator to automatically transfer cleaned potatoes to the next step, saving time, reducing handling, and minimizing the risk of bruising or contamination. SORTING CONVEYOR VST2700 The sorting and conveying machine handles materials after cutting and peeling, with two-sided stations for manual inspection. Workers can remove any pieces with unclean skin for reprocessing. Built from durable 304 stainless steel, it resists impact and corrosion, and its adjustable speed allows the conveyor to be tailored for different materials.

Condition: new, Year of construction: 2026, functionality: fully functional, The Mercedes of cable peeling machines! The PR3 Evolution is produced entirely in our factory near Ulm. All purchased parts come from well-known manufacturers such as Siemens (electrical), Rittal (switch cabinet), KEB (gear motor) and Nachi (ball bearings). A machine truly MADE IN GERMANY! Robust, reliable and safe. The PR3 Evolution complies with the EC Machinery Directive 2006/42/EC Annex II A Technical data: Motor power 4kW / 380 V Cutting speed 44m / min Working range 1.5 mm2 - Ø 90 mm weight Isdpfougt Dxex Ahbstn approx. 700 kg Dimensions W 1000 x L 1800 x H 1520 mm Paint finish Ral 7037 / 7035 Subject to technical modifications 40 years of experience and over 500 machines sold worldwide speak for themselves.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV DTF printer, a digital flatbed printer, replaces conventional laser printers and enables color printing on glass, wood, textiles, plastics, metals, and many other materials. Easy to peel and apply to various surfaces! Iodpfx Aeg Icd Sshbotn New model: UV4060DTF Print head: Epson TX800 2690 dpi max. Includes software for the printer and image editing. Dimensions: 800*858*566mm Weight: 70kg A3 size 31x55cm and 23cm height are possible. 5 x 500ml of ink can be supplied (additional cost). Software setup and printer explanation are available upon request, throughout Germany/Europe (additional cost). Demo videos, etc., can be sent via email/WhatsApp.

Condition: new, Year of construction: 2026, BUMEX Sp. z o.o. | Industrial Powder Coating Technology A professional, compact industrial powder coating system designed for serial production and demanding workshop applications. Engineered with a strong focus on process stability, structural durability and premium coating quality. A complete solution ready for immediate operation in professional powder coating facilities. Scope of Supply ✅ Powder Coating Curing Oven 1200 × 1500 × 1800 mm ✅ Powder Coating Spray Booth with Filtration System 1400 × 800 × 1400 mm POWDER COATING OVEN — BUMEX INDUSTRIAL STANDARD Technical Data Working dimensions: 1200 × 1500 × 1800 mm Total power: 18 kW Key Construction Features ✔ stainless steel front frame preventing paint peeling at the door-to-frame contact area — long-term durability and premium appearance, ✔ excellent temperature uniformity thanks to an efficient air circulation system ensuring stable curing without overheating or cold zones, ✔ heavy-duty industrial construction designed for continuous operation, ✔ 4 patented BUMEX safety locking systems guaranteeing perfect door pressure, chamber tightness and maximum operator safety, ✔ internal loading trolley and external trolley for ergonomic handling, ✔ optimised airflow circulation ensuring repeatable curing quality. Result: fast heating, stable temperature control and perfectly cured powder coating finish. POWDER COATING SPRAY BOOTH Technical Data Working dimensions: 1400 × 800 × 1400 mm Fan power: 1.5 kW Airflow capacity: 6500 m³/h Premium Equipment ✔ construction made from powder-coated galvanised steel panels providing high corrosion resistance, ✔ 2 × 100% polyester filters mounted in TWIST system — fast installation and removal without tools, ✔ automatic filter cleaning system maintaining constant performance, ✔ highly efficient and low-noise industrial extraction fan, ✔ stable airflow ensuring effective powder capture, ✔ ergonomic working area for operator comfort. BUMEX Standard ✔ CE conformity, Ijdshd Nrajpfx Ahbjtn ✔ full technical documentation, ✔ manufacturer warranty, ✔ warranty and after-sales service, ✔ professional technological consulting. Commercial Terms ✔ own transport — individually quoted, ✔ VAT invoice provided, ✔ customised configurations and dimensions available. BUMEX Sp. z o.o. We design industrial equipment built for long-term reliability, safety and predictable performance.

Year of construction: 2026, condition: new, The machine is lightly used, serviced, with a 6-month manufactur warranty, and supplied with new press cloths and racks. Technical details: Performance: 1000 kg/h Press power: 25 T Electric demands: 2,2 kW, 400 V, 6 A Material: WNr. 1.4301, AISI 304 stainless steel Dimesions: 1000x2300x1900 mm Weight: 860 kg IP65 certified electronics Food industrial polyester press clothes Easy to clean Requires minimal maintenance High yield: 75% – depends on the freshness and quality of the fruits Ijdeikbacjpfx Ahbstn Accessories: 18 pcs polyester press clothes and 20 pcs acacia press grids. For high juice extraction of various fruits. (apple, pear, blackberry, strawberry, blueberry, elderberry (destemming needed), currant (destemming needed), peeled carrots, herbs, quinces, beets, sea buckthorn, rowan berries and onions. The work is significantly accelerated so that while one workspace is being pressed, the other can be prepared without any time out. Heavy-duty vibration-free machine feet. It requires minimal maintenance.

Condition: used, Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head Iodpfxok Hdtxe Ahbstn -Slicing drill: drill head cutting head with coolant device -Drill diameter: 62 mm -Intake: MK4 -Dimensions: 740/76/107 mm -Weight: 5.4 kg

Condition: new, Year of construction: 2025, VKM supplies spare parts for VKM, the complete Oswald product range, as well as selected Bezner-Oswald and Wema Probst machines, plus BÖGLI bandsaws and replacement knives manufactured to drawing specifications for a wide range of woodworking machinery. Some parts are available directly from stock. Below are some particularly frequently requested parts: Centering rollers bore 40mm €112.00/each Centering rollers bore 50mm €156.00/each Feed roller bore 40mm €118.00/each Feed roller bore 50mm €138.00/each Exit roller bore 40mm €102.00/each Feed roller bore 50mm €126.00/each Ijdpfx Ahowagxmsbetn Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to prepare a quotation including commercial terms; further spare parts available on request.