Used Buderus Boiler for sale (604)

Condition: used, Year of construction: 1996, Manufacturer : Scholl AG Type : Process tank Year: 1996   Possibility of adding bottom stirrer: 1.5 KW motor and mounting for mixer available. > This service may be subject to an additional quotation   Materials: 1.4571 stainless steel (Aisi 316 Ti) Capacity: 480 litres Pressure: 0 bar Temperature: 150°C Mechanical opening and closing   Jacketed : Materials: 1.4301 stainless steel Pressure: 3 bars Temperature: 150°C Capacity: 61 L   Dimensions : Height: 135 cm Bjdpex R Ddnefx Amreln Diameter : 90 cm  

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Including thermal oil pumps Bsdpjvytfusfx Amrsln Including thermal oil Including all accessories required for operation The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Bedpoyk Sgcefx Amroln

Condition: ready for operation (used), machine/vehicle number: 13350686, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 400 t, stroke length: 150 mm, number of cylinders: 10, cylinder diameter: 120 mm, TECHNICAL DETAILS Pressing force: 400 t Maximum pressing dimensions: 1,500 x 4,400 mm Maximum stroke: 150 mm Number of cylinders: 10 Cylinder diameter: 120 mm Plate material: Aluminium (solid) Plate thickness top and bottom: 90 mm Bsdpfsyuxh Usx Amreln MACHINE DETAILS Power: 7.5 kW Voltage: 380 V Dimensions & Weight Transport dimensions (L x W x H): 13,000 x 2,400 x 2,400 mm Total weight: 25,000 kg EQUIPMENT Infeed and outfeed conveyor Oil heated Oil boiler

Condition: used, Year of construction: 2004, The Gernal 500-liter cooking kettle is a device designed for meat processing plants and used for cooking and preparing cured meat products. The kettle is made of acid-resistant steel, ensuring compliance with food industry hygiene requirements and resistance to intensive, long-term operation in a production facility. Blsdozmhi Dspfx Amron Technical specifications of the Gernal 500-liter cooking kettle Manufacturer: Gernal Type: KK-E-DW-LKR-R-500 Capacity: 500 l Year of manufacture: 2004 Electric heating, 4 x 6 kW (total 24 kW) Power supply: 400 V, 3-phase, 50 Hz Current consumption: 36 A Manufactured in Belgium How does the Gernal 500-liter brewing kettle work? The kettle is electrically heated by four resistance heaters, each with a power of 6 kW—for a total heating capacity of 24 kW—which allows for efficient and uniform heating of the tank’s contents without the need to connect to the plant’s external steam system. This heating method facilitates installation of the unit in smaller facilities that do not have their own steam boiler room. The boiler tank, made entirely of acid-resistant steel, was designed for the cooking and brewing of meat products—such as sausages, cured meats, or other products requiring controlled heat treatment in large batches at a time. Key advantages of the Gernal 500-liter cooking kettle The electric heating system of the Gernal 500-liter kettle allows for easy control of the heating process without depending on pressure or the availability of steam in the plant’s system, which simplifies operation and increases the unit’s reliability. The acid-resistant steel construction ensures high corrosion resistance and ease of cleaning in accordance with the hygiene standards applicable in the meat processing industry. Applications of the Gernal 500 l cooking kettle The Gernal 500 l cooking kettle is used in meat processing plants—primarily for cooking and steaming meat products, such as sausages or other meat products requiring controlled heat treatment in large batches. Thanks to its electric heating system, the unit is suitable for use both in facilities with a steam system and in those where such a system is not available.

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Bjdpfxopy Dxro Amrsln Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R adhesive applicator - 1300 mm - NEW MACHINE - Feeder from the adhesive applicator to the conveyor - Infeed conveyor, 6000 mm long x 950 mm wide, with drive - ORMA 5100x1400 mm surface hydraulic press - 12 pistons, hot water plates, refurbished - Outfeed conveyor, 6000 mm long x 950 mm wide, with drive This press requires medium to high pressure for operation to ensure that the boards are 100% flat. Dimensions of veneering boards: 5100 x 1400 mm (solid, drilled steel boards) Board opening: 180 mm Pressure at full surface: up to 10 kg/cm2 Number of hydraulic pistons: 12 pcs - piston diameter 140 mm Teflon MYLAR film on the boards Blsdpfx Amevva Sysrsn Preparation for heating the boards with hot water - without a boiler Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine has been completely refurbished, adjusted, and tested. Price: EUR 49,000,- excluding VAT, without the OSAMA adhesive applicator Price: EUR 58,000,- excluding VAT, including the OSAMA adhesive applicator

Condition: used, Year of construction: 2026, total length: 4,000 mm, total width: 2,100 mm, total height: 2,050 mm, Colour: White Empty weight: 4.020 kg - Year: 2026 - Documentation available: Yes - └ Type Documentation: Technical data, Electrical diagrams, User manual - └ Language: EN - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: Yes - Main motor power [kW]: 2.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 400 - Total stroke [mm]: 400 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Assembled panel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Total pressure [Ton]: 70 - Working pressure [kg/cm²]: 2 - Heating boiler present: Yes Bsdpfjzkr Tbox Amrsln - Heating type: Oil heated - Max. temperature [°C]: 120 - Transport dimensions: 4000mm x 2100mm x 2050mm (l x w x h) - Transport weight [kg]: 4020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used Italpresse UT/6 hot press for surface finishing by applying veneers to chipboard, plywood, MDF, solid wood, or plastic laminates, also suitable for aluminum and other metals. The press platens are solid plates made of perforated steel. Platen dimensions: 3000 x 1300 mm. Maximum opening: 400 mm. Platen heating is achieved with heat transfer oil and an electric boiler, complete with a circulation pump. Boiler: 27 kW - 380 V. Selector switch for using 50% of the boiler's power (13.5 kW in 1st position) or 27 kW in 2nd position. Pressing time can be set with automatic opening. Maximum pressure: 300 bar. Option to exclude 2 lateral cylinders from the control panel. Protective Mylar film on the platens. Machine dimensions: 3700 x 1700 x H. 2100 mm. Weight: 6600 kg. Blodpszkt Tisfx Amrsn Machine complies with CE standards.

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1124, KIESELGUHR FILTER SCHENK TYPE ZHF S50 Bledpfxjtqf A Ro Amren Type: ZHF S 70 Year of manufacture: 1977 Material: Stainless steel (V4A) 1.4541 Boiler: Capacity: 4300 liters Permissible operating pressure: 6 bar Permissible operating temperature: 20°C Boiler room: 28 segment clamp screws 78 strainers Dimensions: Volume 4300 L Length 4200 mm width 2200 mm Total height 4800 mm Last use: Food (brewery) Technical documentation: Yes

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Sandwich panel construction Equipment: - Sink - Electric heater - Refrigerator Bledpfxjzy Dfze Amron Net: €9,151.26 / Gross: €10,890.00 Article number: BBC113372123.01 Technical data: • Brand: Blyss • Model: Comfort • Vehicle type: Site trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 370 x 210 x 230 cm • External dimensions (L x W x H): 542 x 222 x 290 cm • Permissible total weight: 1,300 kg • Unladen weight: 830 kg • Payload: 470 kg • Chassis: High loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Welded frame, hot-dip galvanized • V-drawbar • Chassis ALKO • Braked rubber spring axle • Ball coupling • Support wheel • Electrical system - 13-pin 12V connector • Downpipe supports with bracket - 4 pcs • Multiplex wood floor • Walls - 25mm sandwich panel, smooth laminate, RAL9016 color • Ventilation grilles - 2 pcs • Entrance door in the front wall • Entry step made of tread plate • Window in the rear wall with shutters • Socket • Switch box • 230V electrical installation • Double sockets - 3 pcs • Ceiling light - 1 pc • Table and benches for 4 people • Shelf above the window • Built-in refrigerator • Sanitary module (1.5-chamber stainless steel sink, faucet, 5 l boiler, 2 x 19 l canisters for clean and dirty water, soap dispenser, paper towel dispenser) • Clothes rail - 4 hooks • Curtain rod with fireproof curtain • Electric heater 2000W • Towing handles - 2 pcs _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: used, Year of construction: 1992, HTI thermal oil heating system in a 20" container - 1,600 liter capacity - 320 kW - Flow temperature 300 °C AB 1000 high-temperature boiler - 1,000 liter capacity - Year of manufacture 1978 Weishaupt burner Blsdpfxswlim Dj Amrjn - Type WL40Z-A The system is operational and in good, used condition. Subject to prior sale and errors. System location: Germany - 02943 Boxberg, OT Nochten, Upper Lusatia

Condition: used, Year of construction: 1999, 6 vertical storage tanks with jacket cooling Additional title: vertical, coolable stainless steel tanks Content: 2200 l Max. pressure: 0,99 bar Bjdpfx Ajw Tlppsmroln Length: 1000 mm Width: 1000 mm Height: 1965 mm Operation / Control: manual Material: stainless steel 1.4301 Position: free-standing Base construction: cylindrical tank with curved bottoms and square tube feet on domes Features: sprayball, bunging apparatus, pressure gauge, 1 shell cooling zone, standhose for content display, manhole, thermometer and sampler in the shell, manual valve for cooling control, central bottom outlet

Condition: excellent (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, total length: 5,700 mm, total width: 1,710 mm, total height: 2,780 mm, operating temperature: 95 °C, Equipment: cooling unit, For sale, as new and in a great functional condition A continuous synthesis reactor for organic compounds, based on microwave system, built in ATEX class II norm Sales price 120 000 CHF ex works (built new for 500 000 CHF) 3 raw material tanks, 100 L each 2 top entry agitators 1 CIP tank 2 finished product tanks, 50 L each 3 pumps 1 microwave with 2 generators (2450 MHz), 12 kW power output, fully conform to EU safety standards All high quality materials steel 1.4404, PTFE, Duran glass or similar High quality components (tanks, pumps etc), sensors and transducers, made in EU - full list available PLC controlled via 24V DC, with dedicated software Documentation available Bodsvy T Ivjpfx Amrjln The UNIT has been now professionally decomissioned and is stored on palettes, ready for pickup. Purchase of selected components (such as tanks or pumps) is also welcome.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) Bsdowxdctspfx Amroln CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Year of construction: 1999, condition: used, Colour: Grey Blsdpfownhicex Amren Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Blsdpfoxqd T Hex Amrsn Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: used, functionality: fully functional, machine/vehicle number: 31019, mileage: 69,900 km, power: 170 kW (231.14 HP), first registration: 05/2021, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, cruise control, differential lock, immobilizer system, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Lrsbn Ed Iezktyvs E Ior Further comparable vehicles available upon request. Bodpfezwfp Nsx Amroln Right-hand drive, 4-cylinder engine OM 934, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t with air suspension and differential lock, lane keeping assist, Active Brake Assist, hill start assist, underrun protection, reversing warning sound, daytime running lights, rain sensor, light sensor, plastic toolbox, fuel tank (125 liters), AdBlue tank (8 liters), fuel tank with locking mechanism. Cab with 2 seats, driver comfort seat, passenger fixed seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote control, immobilizer with transponder, OBU preparation, cruise control, digital tachograph, sun visor, reversing camera. Hydrostatic drive, turbine with infinitely variable speed control, tank made entirely of stainless steel, additional manual pump for lifting the boiler, weight indicator, operating hour counter, sweeping hour counter, and water level indicator (residual quantity 300 l). Automatic shut-off of the water supply when lifting the sweeping unit and when engaging reverse gear, acoustic signal in the cab when the boiler is raised, 2 LED rotating beacons + 2 LED work lights, sound insulation in the unit compartment, sweeping unit on the right/left, capable of sweeping on both sides, dual sweeping system (can sweep on both sides simultaneously), sweeping working width: 2300 mm / with dual sweeping system: 3940 mm, disc brush with steel bristles Ø 700 mm, disc brush angle adjustable (joystick on the right and left), roller brush made of mixed polypropylene and steel wire bristles L = 1500 mm Ø 400 mm, spray nozzles for disc brush, continuous spray bar at the front with 6 spray nozzles, 3 spray nozzles on each disc brush, 6 spray nozzles in the suction nozzle, 5 spray nozzles on the sweeping roller, water system for cleaning the upper suction shaft with external water connection, leaf grid in stainless steel, area approx. 2 m², lifting and lowering pneumatically with vibration mechanism, turbine wheel made of Hardox 700, 8 mm thick, housing arch made of Hardox 500, 5 mm thick, water nozzles for internal cleaning of the turbine, water tank 2000 liters made of stainless steel AISI 316 integrated into the superstructure, filling via hose with anti-return valve, water pump Wilden, P1, diaphragm pump, dry-running protection, leaf suction system at the rear, reversing camera with monitor in the cab, PM 10, holder for broom and shovel, cable remote control.

Condition: used, functionality: fully functional, machine/vehicle number: 36520, mileage: 38,200 km, power: 175 kW (237.93 HP), first registration: 07/2022, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6e, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use. Bodpszi Uh Sefx Amrjln Further comparable vehicles are available upon request. Right-hand drive, 6-cylinder engine OM 936, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t with air suspension and differential lock, lane keeping assistant, active brake assist, hill start assist, underrun protection, reversing warning sound, daytime running lights, rain sensor, light sensor, pollen filter, plastic toolbox, fuel tank capacity: 125 l, AdBlue 8, comfortable driver's air-suspended seat, fixed passenger seat, air conditioning, cruise control, rain sensor, electric windows, electrically adjustable and heated mirrors, radio CD with Bluetooth, speed limiter, central locking with remote control, immobilizer with transponder, underrun protection, digital tachograph, sun visor, reversing camera, sunroof. Hydraulically driven turbine with stepless speed control, tank made entirely of stainless steel, additional manual pump for lifting the boiler, weight indicator, operating hour counter, sweeping hour counter and water level indicator (remaining quantity 300 l), automatic shut-off of the water supply when lifting the sweeping unit and also when engaging reverse gear, acoustic signal in the cab when the boiler is raised, 2 LED rotating beacons + 2 LED work lights, sound insulation in the unit compartment, sweeping unit on the right/left, with dual sweeping system, sweeping width: 2300 mm/ with dual sweeping system: 3940 mm, disc brush with steel bristles, diameter 700 mm, adjustable disc brush angle (joystick on the right and left), roller brush made of mixed polypropylene and steel wire bristles L=1500 mm, diameter 400 mm, spray nozzles for disc brush, continuous spray bar at the front with 6 spray nozzles, 3 spray nozzles per disc brush, 6 spray nozzles in the suction nozzle, 5 spray nozzles on the sweeping roller, weed brush type "C" mounted on the right, water system for cleaning the upper suction shaft with external water connection, leaf grid made of stainless steel, area approx. 2m², lifting and lowering pneumatically with vibration mechanism, turbine wheel made of Hardox 700, 8 mm thick, housing arch made of Hardox AISI 316, integrated into the structure, filling via hose with return flow protection, water pump Wilden, P1, diaphragm pump, dry-running protection, leaf suction system at the rear, reversing camera with monitor in the cab, PM 10, holder for brush and shovel, cable remote control.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: 2026BD25, bending angle (max.): 190 °, overall weight: 1,000 kg, total length: 1,800 mm, total width: 850 mm, total height: 1,230 mm, power: 8 kW (10.88 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, control cabinet height: 1,200 mm, Single - Head Servo CNC Pipe Bending Machine BD25CNC3A1S Machine Model: BD25CNC3A1S Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Blodpfeyak E Nox Amron Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Maximum Bending Pipe Diameter × Wall Thickness (Normal Steel, Aluminum, Copper etc.) Φ25mm×1.2mm Maximum Bending Radius R150mm Maximum Bending Angle 190° Maximum Feeding Length 1200mm Working Speed: Bending Speed Max. 150°/s Working Speed: Pipe Rotating Speed Max. 200°/s Working Speed: Feeding Speed Max. 1000mm/s Working Precision: Bending Precision ±0.1° Working Precision: Pipe Rotating Precision ±0.1° Working Precision: Feeding Precision ±0.1mm Data Transmission Mode 1. Coordinates (X.Y.Z) 2. Working Values (Y.B.C) Bending Mode Servo Bending

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD38NCCOMP, bending angle (max.): 190 °, overall weight: 900 kg, total length: 3,100 mm, total width: 950 mm, total height: 1,500 mm, power: 6 kW (8.16 HP), input voltage: 220 V, type of input current: AC, warranty duration: 12 months, Semi-Automatic Single-Head Hydraulic Pipe Bending Machine BD50NC2A Machine Model: BD38NCCOMP Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Bodpfx Ameya An Nsroln Specification The largest applicable carbon steel pipe (bending radius ≥ 2d) Φ38×2.0mm (thickness Max. 2.0) The largest applicable stainless steel pipe (bending radius ≥ 2d) Φ38×1.5mm (thickness Max. 1.5) Maximum core length (*) 850mm Critical Parts and Functional Components Maximum bending radius (*) 320mm Maximum bend angle 190° The number of bends that can be set for each pipe fitting (*) 25 bends The number of pipe fitting files can be set 280 sets (extensible) Working speed bending speed Max.90°/s Machine tool bending angle ±0.1°

Condition: used, mileage: 203,607 km, power: 184 kW (250.17 HP), first registration: 08/2010, fuel type: diesel, empty load weight: 9,403 kg, maximum load weight: 2,587 kg, overall weight: 11,990 kg, tire size: 245 / 70 R 17,5, next inspection (TÜV): 11/2026, driver cabin: day cab, gearing type: automatic, emission class: none, total length: 24,800 mm, total width: 36,400 mm, total height: 98,400 mm, loading space length: 8,000 mm, Year of construction: 2010, front tire size: 245 / 70 R 17,5, Stationary air conditioning system, the structure was built in 2022! Living area: TV, cooking plate, sink, refrigerator with freezer compartment, leather seating area with table, various cabinets, air conditioning/heating, shower, toilet, washbasin, hot water boiler, 3000-watt inverter, radio CD/Bluetooth radio, microwave, alcove sleeping area, cargo area: 5 tie-down points across, water trough, rubber flooring, ramps at the rear and on the right, 2 roof hatches, 6 sliding windows, lighting, interior monitoring, tack room, fresh water and wastewater tank, passage to the living area, chassis: leather steering wheel and leather seats re-upholstered in 2022, 2 power windows, 2 electric mirrors, radio CD, automatic climate control, cruise control, differential lock, hands-free system, automatic transmission, air-sprung rear axle, screen for rear camera and interior monitoring, trailer hitch ball, 3,000 kg, RV registration, horse area: 4,200 mm. Bsdpfx Amsxwd Hmoroln

Condition: used, 1 item = 720 kg of BÖHLER-THYSSEN stick electrodes Welding electrodes for electric arc welding Stored dry, in 6 kg packages Type Phoenix SH Yellow B + Phoenix Special Yellow AWS A5.1-91 Item No. 18952 Electrode diameter: Ø 5 mm Electrode length: 450 mm Bljdexcnktopfx Amrjn DIN: EN 499-E38 2 RB 12 - Rutile-based stick electrode. - Easy welding in root, fill, and cover passes - Excellent welding in all positions - Suitable for X-ray quality welding in pipeline, boiler, and tank construction - Can be used on factory-coated sheets - In unopened original packaging, stock item Total weight: 720 kg The scope of delivery is: 30 packages of stick electrodes, each containing 24 kg are available 1 package = 24 kg of stick electrodes, welding electrode for electric arc welding = 4 packages of stick electrodes, each containing 6 kg 720 kg = 120 packages, each containing 6 kg = 30 packages, each containing 24 kg

Condition: excellent (used), Year of construction: 2014, We are offering for sale these two Bosch UL-S 14000 steam boilers, which are in very good condition. They were manufactured in 2014. Manufacturer: Bosch Type: UL-S 14000 Year of manufacture: 2014 Bodpfx Aozg Nt Djmrjln If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 375 kg, power: 5.5 kW (7.48 HP), The pressure vessel inspection (boiler and valves) was successfully carried out about two years ago. Bedpfjy Eqlrsx Amrjln