Used Bts-Mf450 Waste Baler, Cardboard, Foil for sale (5,393)

Condition: like new (used), Year of construction: 2022, operating hours: 1,635 h, functionality: fully functional, WINDSHIFTER: Separation of LDPE from the light fraction of SDS. Infeed material belt width 800 mm. Rotary air separator with a capacity of 17,000 m³/hour. Power 17.2 kW. Equipped with filter model BF104m. SDS: Single-drum separation system. For MSW separation. Infeed belt length 2750 mm, width 800 mm. Expansion room 6000 x 2400 mm. Power consumption 32.2 kW. Dimensions 11460 x 2400 x 6770 mm. Kedpfxsy Smwae Abfolu

Condition: good (used), Year of construction: 2003, operating hours: 4,899 h, load capacity: 2,500 kg, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, construction height: 2,480 mm, mileage: 4,899 km, Duplex electric forklift Brand: BT Klodpfx Abjymbakofeu Year of manufacture: 2003 Capacity: 2,500 kg Lift height: 3,700 mm Overall height: 2,480 mm Equipped with sideshift 4,899 operating hours Battery: 2009 Comes with external charger Schedule an appointment for a test drive

Condition: good (used), Year of construction: 1999, load capacity: 1,600 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, empty load weight: 1,300 kg, Received in trade-in Electric stacker Brand: BT Year: 1999 BLOCK PALLETS: outer fork width 68 cm Capacity: 1,600 kg Lifting height: 2,900 mm Drive-through height: 2,000 mm Battery: maintenance-free GEL with charger Watch the video on YouTube Kjdpfx Asyc Eygsbfelu

Condition: good (used), operating hours: 2,200 h, load capacity: 1,200 kg, lifting height: 1,800 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, mileage: 2,200 km, The WIDE GAUGE stacker of this brand is from 2006 and is in good condition; Capacity 1,200 kg; Lifts up to a height of 1,800 mm; Clearance height is 2,100 mm; Only 2,200 hours on the counter; Equipped with stainless steel forks! Outside fork width 88cm, inside fork width 69cm; Gel battery is maintenance-free and comes with an external charger. Watch the video on YouTube. Kledpfx Abow Nk Szofsu

Condition: good (used), Year of construction: 2015, operating hours: 3,126 h, load capacity: 2,000 kg, fuel type: electric, mileage: 3,126 km, This BT brand electric pallet truck is from 2015 and is in good condition.Capacity is 2,000 kg, Equipped with 2,000mm forks;3,126 hours on the counter;Battery from 2013 has an external charger;Video follows. Kedevclpwspfx Abfslu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 x Loma Systems IQ2F Ferrous-in-Foil metal detector head. Model - MDF. Serial number - QFG37184-56153F. Kljdpfoy Umvuex Abfsu Date of manufacture - 2015. Aperture dimensions - 370mm wide x 184mm high. Electrical requirements - 85-265 V / 50-60 hz / 1 phase.

Condition: used, Shank diameter: 5 mm Kljdpfx Absw Uqpkjfou Pitch: 22 mm

Year of construction: 1992, condition: excellent (used), functionality: fully functional, machine/vehicle number: P-Z 176, We are offering this very well-maintained Steuer PZ 90 foil embossing machine, manufactured in 1992. Manufacturer: Steuer Model: PZ 90 Year of manufacture: 1992 This is a machine from the manufacturer STEUER, model PZ 90. Klodpfx Aey Ulitsbfeu - Embossing cylinder format 90x65cm (instead of 90x65cm) - Base is height-adjustable. This embossing cylinder has special functions, such as 3 hologram tracks for embossing (original from PZ-Steuer). The main motor underwent a general overhaul in 2025. There are 3 bases available, and various accessories are included. Dismantling and loading are the responsibility of the buyer; we will only disconnect the machine from the power supply. If you have any questions or require further information, please feel free to send us a message by email.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Ksdpey Uimvjfx Abfolu Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feeding opening dimensions: 119.5 cm × 65 cm Condition: very good! Video of the machine in operation available upon request.

Condition: like new (used), Year of construction: 2022, operating hours: 1,335 h, functionality: fully functional, For municipal waste. Spliter 425 unit: Width 2500 mm. Length 4000 mm. 16 shafts. Acceleration belt 3100 mm. Positioned at 25 degrees. Width 1200 mm, effective 1050 mm. Speed from 1 to 2.5 m/s. Total consumption 11 kW. Approximate dimensions: 6685 x 2720 mm. Height 676 mm. Approximate weight 9 t. Kodpjy Sgk Hefx Abfjlu

Condition: used, Year of construction: 2008, Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  Capacity: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packing type: Wrap-around carton box Carton dimensions: Length: 120 – 300 mm Width: 210 – 400 mm Height: 100 – 350 mm Formation of packs: 2x5 and 4x5 Scope of Delivery  Meypack VP 531WA wrap-around packer Kodpfx Abewhf S Usfelu

Condition: used, functionality: fully functional, Main Technical Specifications Machine Model: COMDEC LV 50-40 PFT horizontal baling press Pressing force: 50 tons Horizontal hydraulic baler for cardboard, paper and industrial waste Electrical data Power supply: 380 V / 3 phase / 90 A Hydraulic motors: Klsdpfxey Uddio Abfou 2 × 22 kW hydraulic pump motors Conveyor pump motor Hydraulic system Hydraulic main cylinder: 180 / 150 × 2000 mm Hydraulic pressure control system with oil cooling and filtration Oil tank with pressure and return filters Machine dimensions Total machine length: approx. 8,394 mm Width: approx. 1,920 mm Height: approx. 3,104 mm Functional equipment Automatic wire tying system Bale length control system Hydraulic wire twisting unit Automatic bale ejection system Conveyor control cabinet and electrical automation system Noise level Working noise level below 70 dBA

Condition: good (used), Year of construction: 2006, Used grinding machine from Kraku (DE) Ksdpfx Abjwc Nl Uofslu Type: BTS 150 Belt width: 150 mm Circular grinder with a diameter of 300 mm

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production Ksdpfsxzvamex Abfelu available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. Kledpsy R Nnfefx Abfsu • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), Year of construction: 2008, operating hours: 2,500 h, load capacity: 1,200 kg, lifting height: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, mileage: 2,500 km, The WIDE-TRACK stacker from the brand is from 2008 and in good condition; Capacity 1,200 kg; Lifts up to a height of 1,400 mm. Clearance height is 2,100 mm. Only 2,500 operating hours; Equipped with stainless steel forks! Outside fork width 88 cm, inside 69 cm; Gel battery is maintenance-free and comes with external charger. Watch the video on YouTube. Kljdjy R Aqtjpfx Abfou

Condition: used, Year of construction: 2013, operating hours: 3120 h, with loading fork Kljdpfx Abey Rvm Isfou

Condition: used, operating hours: 429 h, color: grey, total length: 3,250 mm, total width: 1,250 mm, total height: 1,900 mm, Empty weight: 3.000 kg Price: On request Ksdpfsym Uzbjx Abfolu - Documentation available: No - CE certificate present: No - Serial number: - Operating hours: 429 - Transport dimensions: 3250mm x 1250mm x 1900mm (l x w x h) - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 307 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information Klodpfxjym Uxte Abfsu VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request Kljdpfxeyrtcue Abfsu - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Klodpfey T Ngtex Abfeu Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 line hologram capability : Full impression and register tested before supply Carries distributor's warranty

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, CARTON CUTTING AND CREASING MACHINE LCR VISION 2800 Technical features and options Kodpfjy T Evdjx Abfjlu Production rate: 7/8 boxes/min Group positioning time: 7 to 12 sec Max. cardboard width: 2800 mm Max. cardboard length: unlimited Single-fan-fold cardboard/sheets Cardboard types: A, B, C, K, BA, BC, EB, single/double flute Operator panel Thickness: 2 to 7 mm CAD/CAM system with a library of FEFCO/LCR box designs Function to acquire production lists by uploading/downloading from a host system (AS400, SAP, SQL)

Condition: excellent (used), Year of construction: 2024, operating hours: 992 h, functionality: fully functional, machine/vehicle number: 20240250, overall weight: 6,000 kg, For sale: BOXMATIC Manual 25 DCFM-D – a semi-automatic machine for producing regular corrugated cardboard folding boxes with cutting capabilities. It is an ideal solution for companies requiring flexible production of corrugated cardboard boxes with frequent order changes. Kodpfxey Tv N Is Abfslu The BOXMATIC Manual 25 model is designed for the professional and efficient production of basic types of folding boxes, with the option of additional die-cutting (e.g., cutting hand holes, cross boxes), particularly FEFCO 02 and FEFCO 03 types made from single, double, or triple-wall corrugated cardboard. The machine can also produce dividers or simply score and cut the cardboard. The machine performs excellently in short and medium runs (10–5000 units), offering quick changeovers and a wide range of produced formats and FEFCO box types. Key advantages: - Cardboard handling: single, double, and triple-wall (2–12 mm) - Max. sheet width: 2500 mm - Output: 300–600 units/hour, up to 2300 units/hour in multi-product mode - Quick setup and production change (approx. 5–10 minutes) - Wide range of FEFCO box types - Flexographic printing and additional die-cutting options - Ideal for producing large formats - Excellent value for money Technical specifications: - Weight: approx. 6000 kg - Length: 3070 mm - Width: 2820 mm - Height: 1710 mm - Power supply: 400 V / 50 Hz - Power: 19 kW

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Kodjy Tlzajpfx Abfolu

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. For sale with factory support and spare parts due to underutilization. Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) Kedpfxeykz Ebe Abfolu - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000