Used Belt Press Pt-1050 for sale (22,823)

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EP8607, Press brake punch for Trumpf Ncsdpfjyzpf Ejx Amyow 86 degree H220mm gooseneck punch 42CrMo material with full body hardened and radius tip laser hardened

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table by Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, form gluing, form veneering, edge gluing, etc. With this press, you can, with some limitations, do without a hydraulic veneer press. New heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or mineral materials. Frame internal dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks, each 200 liters, for comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which means the pump switches off when the target negative pressure is reached and does not run continuously. Movable on four swivel casters, lockable Frame easily folds open, secured with two latches Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Ncsdey Hl Hpjpfx Amyjw Original paint, some areas have been touched up The silicone membrane and the base plate have been replaced, the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (L x W x H). Weight approx. 550kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm Nsdpfx Ajvwgl Nomyecw upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm Nodpfxex Uru Ns Amyecw weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW Njdpfx Ajxcblwjmyecw weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm table dimension - longitudinal 400 mm Nodpfovwgqrox Amyscw dimensions of the machine ca. 1400 x 1050 x 2350 m

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m Nodsym D E Aspfx Amyocw

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam Ncedpew Nafksfx Amyjw - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: reconditioned (used), Year of construction: 2014, Working width 4000 mm Working height 2550 mm Number of cylinders 6 St. S+S Bavaria 2000 L window frame and sash press The press will be partially reconditioned at our warehouse prior to pickup. Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for "mortise and tenon" corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550* mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure plates (for triangular/pointed windows) - All pressure plates and abutments faced with plastic - Control cabinet located on the inside of the left base leg - Press can be completely disassembled if required (price on request!) Ncedpfx Amozpblkjyow - Finish: RAL 7035 Light Grey and RAL 7016 Anthracite Grey Image shows an archive photo of a delivered press. No original photos available yet. (Technical specifications provided by the manufacturer – subject to change/no guarantee)

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Ncedpfjhmmfksx Amyew Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table Nodjmck Ryjpfx Amyscw - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Ncodpfx Amexpqy Dsysw Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Ncedpsya Iaqofx Amysw Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), Year of construction: 2010, Engel Victory 1050/220 Tech with Wittmann W721 robot Year of manufacture: 2010 Injection unit: Screw diameter: 55 mm Shot weight: approx. 480 g Injection pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 3 Control system with hot runner system x 30 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 12200 kg Length/Width/Height: 5.66x1.88x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Nodpfx Aszpauksmyjcw Price: On request

Year of construction: 2016, condition: used, press capacity 14,5 MN operating pressure 310 bar stroke of press 960 mm speed Press: max. 23 mm/s speed Press: nom. 17 mm/s Extrusion Press SMS - HyBrEx 14 - Extrusion centerline above pass line: 1.000 mm - Extrusion height above pass line: 3.400 mm BILLET CONTAINER - Contact force: 1.4 MN - Retraction force: 1.0 MN - Retraction stroke: 1,155 mm - Bore diameter: 160 mm - Container length: 830 mm - Billet length, min. - max.: 250–800 mm - Shortest billet length (with billet shearing): 200 mm SHEARS - Shear, cutting force: 0.4 MN - Profile shear – tool slide, cutting force: 0.2 MN PROFILE CIRCLE / TOOL ASSEMBLY - Die backer opening – diameter: 190 mm - Die backer opening – width: 230 mm - Tool assembly – diameter: 330 / 277.5 mm Ncsdjzhxiwopfx Amyjw - Tool assembly – height: 380 mm HYDRAULIC SYSTEM Four high-pressure oil pumps - Max. operating pressure: 310 bar - Drive power: 75 kW High-pressure variable-displacement pump - Max. operating pressure: 320 bar - Drive power: 5.5 kW Low-pressure double pump - Max. operating pressure: 320 bar - Drive power: 37 kW Filter and cooling pump - Max. operating pressure: 6 bar - Drive power: 5.5 kW INSTALLED MOTOR POWER - Billet container: 2x 15.7 kW - Moving crosshead: 2x 31.7 kW - Billet loader: 14 kW Connected load: 600 kVA

Condition: good (used), - All rubber rollers new or as good as new - Belt length 3000 mm - Year of manufacture Nodpjulvlkofx Amyscw - Price On request

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Ncodjzn Hx Tjpfx Amyjw

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt Njdpfxjxlr U Io Amyjcw - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm shelf pressure 260 bar max pressure of side pressure 120 bar bumper max pressure 200 bar total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min feeder speed 0 -40 m / min Nodsh Tm A Eopfx Amyocw adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm Transport dimensions 1000x 230x 220 cm weight 11 t

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant Ncedjgr Er Sjpfx Amyjw - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: used, functionality: fully functional, grinding width: 630 mm, grinding height: 150 mm, height adjustment type: electric, - Italian-made - Used sander, in very good condition TECHNICAL SPECIFICATIONS: - Maximum working width: 630mm - Maximum working height: 150mm 1 unit: + - Grooved rubber calibrating roller + pad + 1 metal roller: + *from above: - Rubber feed-in slip roller: + - Processing unit: + - Rubber feed-out slip roller: + *from below: Nedpfsw Ip Ekex Amyjcw - Rubber slip roller: + - Feed belt: + - Pneumatic belt oscillation with photocells: + - 2 feed speeds: 0.28kW - Motor: 6kW - Electric brake: + - Electric table elevation: + - Working pressure: 6-8 bar - Extraction nozzle diameter: 150mm - Overall dimensions (L/W/H): 1070x1320x1900mm - Weight: 722kg

Condition: used, Year of construction: 1993, functionality: fully functional, grinding width: 1,350 mm, grinding height: 150 mm, working height: 150 mm, height adjustment type: electric, workpiece height (max.): 150 mm, - Very good condition - Year of manufacture: 1993 Ncodpfx Ajw H Sk Tomyow - Electronic PLC control: Heesemann - Model / Type: LSM 6 TECHNICAL PARAMETERS: - Working sanding width: 1350 mm - Max. thickness of workpieces: 150 mm MACHINE CONFIGURATION: I – Cross sanding unit (sergeant type) with sequential electronic pressure - Main motor: 13 kW - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pad pressure - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTO SENSOR OSCILLATION - Pneumatic bar cleaning system with oscillation for cleaning belts III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pad pressure - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit for workpiece behind the main unit at the outfeed - Motor: 1.1 kW - Extraction port: 1 x 140 mm - Feed regulated by gear motor: 4 kW feed motor - Feed speed: 6–26 m/min - Air requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic feed belt cleaning system - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for sanding lacquer and intermediate sanding between coats - Dimensions (LxWxH): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m Ncjdpfsyuylnox Amysw – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 150 mm, type of input current: three-phase, – Made in Germany – Shoes with pneumatic jump (pressure shoe) TECHNICAL PARAMETERS: – Sanding width: 1100 mm – Max. sanding height: 150 mm – Min. workpiece length: 600 mm – Motor power: 2 x 15 kW – Both units with pressure shoes – Pneumatic pressure shoes – Adjustable shoe pressure – Rubber rollers: 70 Shore – Pneumatic oscillation – Cleaning brush – Feed tables with support rollers – Continuously adjustable feed speed Ncodpfx Amjyyv Auoyow – Feed speed range: 4–13 m/min – Extraction port diameter: 3 x 200 mm – Machine dimensions (L/W/H): 250 x 200 x 210 cm – Weight: ~2500 kg

Condition: used, Year of construction: 2005, functionality: fully functional, working width: 910 mm, grinding width: 910 mm, overall weight: 1,000 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, type of input current: three-phase, - After technical inspection - Czech production - Year of manufacture 2005 TECHNICAL SPECIFICATIONS: - Working width 910 mm - Height of workpiece 3-160 mm - Main motor 11 kW - Total machine power 12 kW - Shoe - Electric height adjustment - Automatic star/delta switching - Ammeter - Oscillation using an opto-electronic sensor - Table positioner - Working pressure 5.5/7 bar - Two feed speeds 4.5/9 m/min - Rubber pressure rollers - Pneumatic disc brake for the main motor - Diameter of dust extraction nozzle 140 mm Machine dimensions: Nedpfx Amezinr Dsyecw - Length 160 cm - Width 160 cm - Height 220 cm - Weight 1000 kg