Used Atos Pfed-54129/029/1Dto for sale (537)

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. Lajdpfxjzdtfls Anuec The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Despatch laboratory oven. Despatch laboratory oven + 8” WAFER LCC: Maximum temperature 260 °C Lockable disconnect switch – turn off the control panel for easy maintenance Protocol 3 controller with large LCD display, integrated data logging functions, and USB port for easy oven setup and data export Stainless steel interior with continuously welded interior seams on the insulation side to protect the working area from contamination Lsdpfx Aozdr Ekonujac Programmable door interlock prevents the operator from opening the oven door while the cycle is running The door interlock switch turns off the heating when the door is opened The recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic manometer monitors the pressure drop of the HEPA filter, so you know when the filter needs to be replaced Electric door release for ergonomic operation UL & C-UL listed control panel opens Modbus communication connection (RS485) for remote monitoring and recording Chamber dimension L 350 mm Chamber dimension W 350 mm Chamber dimension H 350 mm maximum temperature 260°C Digital display Yes Electrical connection 230 V Overall dimension L 830 mm Overall dimension W 910 mm Overall dimension H 560 mm Type: LCC1-16NV-3 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory dryer WALTHER TROWAL G 100 B Year of construction: 1998 Bowl dimensions: Ø 1100 m x height 1100 mm Inside dimensions: width 200 mm x max height 300 mm Motor rotation: 1500 t/min. Motor power: 0,45 kW Max heating capacity: 3 kW In perfect working condition Weight: 250 kg Ledpfxszf Ebus Anuoac

Year of construction: 2020, condition: like new (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Ljdpfow Sfg Esx Anujac Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Ljdpow R T Dijfx Anujac Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Lajdezf A D Hopfx Anuec Manual hatch Independent electrical panel Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

Condition: used, max. load 90000 N 175 x 105 x 55 mm weight 4 kg screw diameter 17 14 pieces in stock, without threaded screw, Ljdpfx Aeuftryjnusac Unit price € 40,-

Year of construction: 1998, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Complete Technological Line for tomato paste production - 3-stage vacuum evaporators Professional industrial plant for the concentration of tomato juice and fruit juices. Manufactured by the experienced Bulgarian manufacturer Thermohran Engineering, this system is designed for high-quality production, preserving the organoleptic characteristics of the product through low-temperature vacuum evaporation. Technical Specifications: Manufacturer: Thermohran Engineering Ltd. (Bulgaria) Year of Construction: 1998 Material: High-grade Stainless Steel (Inox) System Type: 3-stage Vacuum Evaporator Components Included: * Main Evaporation Columns II.5. GENERAL LAYOUT DATA OF THE COMPLETE LINE Capacity (processed tomatoes) t/24h 150 Product capacity 28-30 oBrix kg/h 1 000 Lajdszfx Dvepfx Anujc Steam consumption kg/h 4 000 Tap water consumption m3/h 10 Sealing water consumption m3/h 0.7 Electrical consumption kW/h 147 Water consumption t = 18 oC m3/h 78 t = 28 oC m3/h 195 Air consumption at P= 4 bar nm3/h 7 Mounting area m 6x40x6m (in the area of the evaporating installation the height must be 13 m) Complete Control Panel (Brix meter) Pumping Station (centrifugal pumps) External Cooling Tower / Heat Exchanger unit Applications: Enrichment of tomato juice (Double and Triple Concentrate). Fruit juice concentration.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total length: 3,200 mm, total width: 600 mm, input voltage: 400 V, inner dimension width: 580 mm, Equipment: rotational speed infinitely variable, Brand RÖSLER Type R2000 2 BT, double blower Electrical connection 380V Dimension L (Length) 3200mm Dimension W (Width) 1400mm Lodpfxjzfwmij Anusac Dimension H (Height) 1850mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total length: 3,200 mm, total width: 600 mm, input voltage: 400 V, inner dimension width: 580 mm, Equipment: rotational speed infinitely variable, Brand RÖSLER Type R2000 1 BT Electrical connection 380V Dimension L (Length) 3200mm Laedpfx Anozfwl Souec Dimension W (Width) 1400mm Dimension H (Height) 1850mm

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Laodpfx Anozc N Axsusc Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: used, functionality: fully functional, input voltage: 220 V, Deburring machine Gratomat 120 Manufacturer: Herbert Rausch Maschinenfabrik, Haan, Rhld. Drive motor: 0095 Grinding motor: 250.00 GE / USJ 65 Operating voltage: 220 V, 50 Hz Year of manufacture: 1962 Exclusive distribution by: Lenze & Co. K.G., Hameln / Weser Gratomat 120 L Manufacturer: Maschinenfabrik Herbert Rausch KG, Haan / Rhld. Drive motor: 0.095 Grinding motor: 250.00 GE USJ 65 Operating voltage: 220 V, 50 Hz Year of manufacture: 1965 Exclusive distribution by: Hans Lenze & Co. K.G., Groß-Berkel near Hameln Price: Negotiable Lajdpfx Aozfhq Esnuec All technical specifications are subject to typographical errors and omissions. Sale exclusively in EU countries.

Condition: new, Year of construction: 2025, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität Pressure line 28 N / mm air pressure max. 4 bar Capacity of dye tub Becken - 1,3 Liter Capacity of dye tub Zwickel - 0,3 Liter Speed driven roll 0-25 U/min speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg dimensions 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, Lajdeu Dn Uvspfx Anusc • by means of wheels the pressure roll is driven when the nip is open.

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Lodpfjzd Unbjx Anueac Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: used, isoloc machine feet 8.0 – set of 6 – like new 6 isoloc machine feet 8.0 (UMS8) from isoloc Schwingungstechnik GmbH. In very good, like-new condition. Lsdjzcq Enjpfx Anueac Ideal for vibration-isolated installation and precise leveling of machines. Robust industrial quality – Made in Germany.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, option for grinding on the inside or on a flat surface mechanical oscillation electric adjustment of the unit up/down height of the grinding belt: 150 mm table angle adjustment option for grinding curved components total motor power: 3.6 kW 2004 Lodpezdypwefx Anueac power supply: 380 V

Year of construction: 2019, condition: excellent (used), Autopack Vibratory hopper Ljdjzcg Ewjpfx Anuoac 2019, Stainless, 150Kgs stainless hopper, 250mm discharge width, overall length 1500mm x overall width 1050mm, 1Ph

Condition: good (used), WALTHER CN 550 PN Trowal + RÖSLER Z300 Turbo Floc Centrifuge -Walther Trowal + Rösler Centrifuge -Coating in good condition -Rotational speed: 1460 RPM -Capacity: 550 liters -Motor: 3.5 kW -Pneumatic soundproofing cover -Control cabinet -SEPARATION UNIT -Dirty water / drainage system -Compound + 2 boxes of sliding stones -Documentation -Dimensions: L x W x H: 2 x 1.8 x 1.8 meters / Weight: 1500 kg Ledeyh Ezljpfx Anueac RÖSLER Z 300 TURBO FLOC / Centrifuge -Year of manufacture: 1996 -Rotor speed: 3160 RPM -Power: 4 kW -Max. throughput: 800 liters per hour -Documentation -Dimensions: L x W x H: 1.7 x 1 x 1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: ready for operation (used), Polishing and deburring system / KROMAS VM 200 with separation unit -Rotary vibrator with a 200-liter capacity -Inner diameter 980 mm -Motor power 1.1 kW -Control panel / ON / OFF / SEPARATE / TIMER / Stepless speed control -Separation unit -Soundproof cover -Machine feet Lsdpfxjzdb Hxj Anusac -Documentation Dimensions: L x W x H 1.5 x 1.5 x 1.6 meters / Weight 650 kg Errors and omissions excepted.

Condition: used, Málo používaný sudový rotační homogenizátor / mixér Pharmatech Model BV 400A MultiBlend z nerezové oceli. - Výrobce: Pharmatech (Terriva) UK, - Model: BV 400A Laedpfxszbug To Anusc - Maximální hmotnost dávky: 200 kg - Pohon míchání: 2,2 kW, 1400 ot./min, 50Hz, Ex II 3 G EEx nA II T3 / II 3 D EEx tDT

Condition: used, Unused GEA Niro type F01A stainless steel rotary atomiser suitable for use with GEA Niro Mobile Minor spray dryer. No atomiser wheel included. Ledpfjzbubkex Anujac

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: presumably SRC-N 250-2R Year of manufacture: approx. 2000 Bowl diameter (bottom): 250 mm Bowl diameter (top): 380 mm Bowl internal height: approx. 90 mm Sorting track width: 30 mm Overall height (drive + bowl with sorting track): 405 mm Oscillation frequency: 100 Hz / 6000 min-1 Mains connection: 230 volts, 50 Hz - Control unit RNA, type ESG 90 for adjustable vibration speed - Vibratory bowl with rubber coating - The conveyor was used for feeding automotive fuses Space requirement Ø x H: 430 x 405 mm Weight: 38 kg Good condition Ljdpszbhuqsfx Anuoac A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: new, Vibratory feeder Ledey H Ewhjpfx Anuoac Deprag ADFS-01811-P/15 / Deprag ADFS-2-1508-1-X

Year of construction: 2021, condition: used, (1) Gas Chromatograph Mass Spectrometer Lodpfx Anezbaw Rjueac Technical Details: Shimadzu Gas Chromatograph Mass Spectrometer with AOC-20S autosampler and ASOC-20i autoinjector.

Condition: used, Tall metal cabinet Width: 1150 mm Ljdpfxeza Edyo Anusac Depth: 520 mm Height: 1750 mm Weight: 90 kg Includes 3 shelves, doors lockable.