Used Womatec Dany 1.0 for sale (1,204)

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Tedozf Eh Uspfx Amrec Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: used, mileage: 54,372 km, power: 260 kW (353.50 HP), first registration: 01/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, loading space length: 4,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, navigation system, Immaculately maintained Mercedes-Benz 2135 Arocs truck with Atlas AK 135 loading crane, featuring 3 hydraulic extensions, remote control, and elevated platform control, plus additional 5th and 6th control circuits for the swivel head/grab, with only 402 operating hours and a new UVV inspection valid until 07/2026. Includes a Meiller three-way tipper, payload of 6,860 kg, air conditioning, automatic transmission, trailer hitch (pintle hook), tipping hydraulic connections, High Performance Engine Brake, navigation system, leather steering wheel, refrigerator in the cab, from first owner with only 54,372 km, and more. Equipment: S-cab Classic-Space short cab with rear window Wheelbase 3,900 mm Heavy-duty chassis Weight variant 20.5 t (8.0/13.0) Permissible total weight 18,000 kg Technically possible total weight of 20,500 kg Payload 6,860 kg at 18,000 kg permissible total weight Payload 9,360 kg at 20,500 kg technically possible total weight Engine OM936 R6 7.7 l with 260 kW (354 hp) and 1,400 Nm of torque Engine Euro 6 E Drive 4x2 Loading crane Atlas AK 135.2E - A3 with hydraulic 3-section extension UVV-compliant crane, inspected new in 07/2026 Crane has only 402 operating hours Lifting capacity at 1.90 m / 5,700 kg // 4.30 m / 2,910 kg // 6.20 m / 1,920 kg // 8.10 m / 1,410 kg // 10.10 m / 1,130 kg according to manufacturer Optional crane extension with 1 mechanical section up to 12.11 m at 850 kg available for an extra charge Remote control Elevated platform control with storage for remote control Todpezn Ehysfx Amrec Swivel servo and grab control 2-point support with swivel supports and hydraulically extendable Meiller 3-way tipper, 4.0 m x 2.42 m side walls 0.60 m high Front wall 800 mm high Tie-down recesses in the tipper bed Automatic transmission Type G 211-12/14.93-1.0 Mercedes-Benz PowerShift 3 Predictive Powertrain Control Differential lock in rear axle Front and rear axles leaf-sprung Stabilizers on front and rear axles Front axle 8.0 t, rear axle, crown wheel 300 planetary 13.4 t Front spring 8.0 t, rear spring 13.0 t Permissible front axle load 8,000 kg, permissible rear axle load 11,500 kg Technically possible rear axle load 13,000 kg Axle ratio i = 3.714 Air conditioning Electronic braking system with ABS and ASR High Performance Engine Brake Parking brake electronic Disc brakes with full protection on front and rear axles Increased engine brake power Navigation system Refrigerator in the cab Cruise control Trailer hitch (pintle hook) Rockinger D40 with air pressure connections Permissible total weight of the vehicle and trailer 44,000 kg Trailer load with continuous braking system 35,000 kg Rear tipping hydraulic connections for tipping trailers Multi-function steering wheel in leather LED daytime running lights 290-liter aluminum tank External sun visor Retractable side sunblind on driver's side Comfort door locking system 2 LED roof beacons on the cab roof Electrically adjustable side mirrors and electric windows Driver's suspension seat comfort with velour seat covers Comfort Package cab German vehicle from first owner Very good and well-maintained condition Price NET, plus 19% VAT. We will be happy to provide you with attractive financing offers. All information without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2604

Condition: used, mileage: 170,811 km, power: 390 kW (530.25 HP), first registration: 07/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ACTROS 2553 L TANK TRUCK * Body: TANK with stainless steel A 3 * Tag axle, hydraulically steered + liftable * Tank cleaning system, 3 chambers, NEW 09/2026 * Vehicle No. for customer inquiries: 4802 * Engine: Euro VI, E * Tag axle, 7.5 t, steered, load-reducing, liftable * Predictive Powertrain Control * Secondary water retarder * Distance Assist System * ADR Type Class AT * Aluminum rims 9.00 X 22.5, Dura-Bright, Alcoa * Trailer Stability Assist (TSA) * Automatic high/low beam and turning lights * Bi-Xenon headlights * Differential lock, rear axle * Air conditioning * Refrigerator, on engine tunnel * Navigation system * Safety Package * Lane Keeping Assist * Environmental badge (green) * Traffic Sign Assist * Roll Control Assist * Trailer coupling, comfort, D40, Ringfeder * Attention Assist * High Performance Engine Brake * Light sensor * Air suspension, rear axle * Multimedia cockpit, interactive * Wheel formula 6x2 ENA * Rain sensor * Service booklet maintained * Sight Package * Stability Control Assist (ESP) * Front axle, air-sprung * Active Brake Assist 5 * Actros S/M cab, model generation 5 * Airbag, driver * Trailer brake connection at the rear, Duo-Matic+Standard * Trailer brake, 2-line, brake connections on the left * Trailer socket 24 V, 15-pole * Air horns, cab roof * Electronic brake system with ABS and ASR * Driver's suspension seat, comfort * Parking brake, electronic * Transmission G 281-12/14.93-1.0 * Weight variant 26.0 t (8.0/11.5/7.5) * Mercedes PowerShift 3 * Auxiliary drive, single * Wheelbase 4300 mm * Locking system, with central locking * Exterior sun visor, transparent * Cruise control * Pre-installation for Mercedes-Benz Truck App Portal * Two-seater * AdBlue tank 60 l, left * Starting assist, speed limitation 30 km/h * Roof hatch/ventilation flap, roof * Heater, electronic compressed air supply unit * M-cab ClassicSpace, 2.30 m, tunnel 170 mm * Mercedes star, illuminated * Engine OM471, R6, 12.8 l, 390 kW (530 hp), 2600 Nm * Tires tubeless, 315/80 R 22.5 rear axle * Tires tubeless, 315/80 R 22.5 front axle/front steer axle/rear axle * Headlight cleaning system * Tank 290 l, left, 650 x 565 x 950 mm, aluminum * Additional stabilizer, rear/tag axle * Steering oil cooler * NA MB 123-10b, flange, N-speed * Tachograph digital, 2nd generation, ADR No liability for printing and typographical errors. Sales only to commercial customers. Subject to errors and prior sale. * Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer. * Warranty insurance possible upon request with the insurer. * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our partners on site. * Customs license plates for 30 days * All customs documents for export are possible, but must be requested individually. * TOLL for Toll-Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württ) train station. * TRAIN STATION: 72555 METZINGEN/WÜRTT. Tjdpfx Amez D Nr Eerec * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * *

Condition: used, Year of construction: 2009, Manufacturer / Brand: HB-THERM Model / Type: HB-160Z1 (Serial number: 909-9512) Todpjz D T Ttefx Amrjc Year of manufacture: 2009 Heat transfer medium: Pressurized water (closed circuit) Maximum temperature: 160 °C Maximum system pressure: 20 bar Internal fluid volume: 1.5 L Heating capacity: 8.0 kW Pump capacity: 1.0 kW (max. flow rate 60 L/min, max. discharge head 60 m) Cooling capacity: 30 kW (at 60 K temperature difference) Supply voltage: 380–420 V (3~, 50–60 Hz) Nominal ratings: 400 V, 50 Hz | 14 A | Total power consumption 9.1 kW Cooling water inlet pressure: 2 to 5 bar Additional equipment: DFM 8 flow measurement module (HB-FM160-20), 4-zone manifold (circuits 1, 9, 8, 7)

Condition: used, Year of construction: 2004, Technical details: Todpfx Aju Nvnuemroc lifting capacity: 1,0 t span width: 7170 mm Arm length: Säule - Kranhaken: 7.000 mm height lower edge cantilever arm: ca. 1.550 mm column diameter: Ø 400 mm rotation: +/- 100 ° total power requirement: 1,1 kW weight: ges. ca. 1450 kg travel of hook: ca. 5000 mm Classification H2, B3 Hoist Star Liftket 1.0 to type 071/53; lifting speed 5/1.25 m/min; load chain/round link chain DIN 5684-0 7.2x21 - 2/1; manual trolley travel; travel distance hoist 5,600 mm, External control, Hubhöhe 2 m Boom length: 7,300 mm Column height 1,950 mm Column base plate Ø 915 mm with 16x Ø 30 mm holes distributed around the circumference incl. 15 foot clamping screws incl. KIPP pneumatic push rod tensioner i.D. *

Condition: used, Technical details: welding current: 440 V weight of the machine approx.: 242 kg dimensions L x W x H: 1,5 x 0,8 x 1,3 m Tedpfx Asvz Advomrjc MIG/MAG control unit: with 2/4-cycle switchover with 3x12 welding stages Cooling system: water-cooled with frost protection Shielding gas with solenoid valve and pressure reducer Hose package 3.6 m long Torch head Ground clamp with ground cable 4.8 m long Wire feed with 4 roller drive for wire diameter: Ø 1.0 mm/Ø 1.2 mm *

Condition: new, !!! We have two units in stock. Price is for one unit only !!! The SAMSON Type 3432 is the Controller Station component of the SAMSON Type 3430 Series Pneumatic Indicating Controllers. It is primarily configured for industrial temperature and pressure regulation. The primary technical specifications for the Type 3432/3430 series from the SAMSON Technical Data Sheet include: Core System Configuration Device Framework: Operates as a chassis/base station (Type 3432) that houses modular inserts. Compatible Modules: Controller Modules: Type 3433 or Type 3434 (offering PI or PID control modes). Transmitter Modules: Type 3436 (for temperature with capillary sensors) or Type 3435 (for standard pneumatic signals). Pneumatic & Operating Specifications Tedpfx Amsz Ezyworjc Required Supply Pressure: Standard 1.4 bar (20 psi). Operating Air Pressure Range: Expandable from 2.0 to 12 bar (30 to 180 psi) when utilizing an optional integrated SAMSON Supply Pressure Regulator. Output Control Signal: 0.2 to 1.0 bar (3 to 15 psi) standard pneumatic analog output. Temperature Measuring Range: Typically –40 to 300 °C (depending on the installed capillary sensor transmitter). Front Panel Interface & Features Visual Indicators: Designed with high-visibility pointers displaying the Set point (w), Controlled variable/Actual value (x), Set point deviation, and Output pressure (y) simultaneously. Manual Overrides: Features an integrated Manual/Automatic (MAN/AUTO) switch alongside a dedicated manual mode adjustment knob. Bumpless Switchover: Equipped with a built-in differential pressure indicator to ensure seamless, bump-free handovers between manual and automatic loops. Mounting Enclosure: Built with a durable chassis optimized for wall, panel, or pipe mounting layouts. Brand new never used. Please check out our other listings as well.

Condition: good (used), Approx. 51 Corlette carts, widths 1.20 and 1.80m, upholstered carts, furniture dollies, heavy-duty carts - used: Prices per unit ex works (net): Type 1 Corlette 1.80m: only €39.00 Type 2 Corlette 1.20m: only €29.00 Type 3 Upholstered cart: only €20.00 Type 4 Furniture dolly / furniture cart: €19.00 Type 5 Heavy-duty cart: €25.00 Manufacturer: unknown Type: unknown Year of manufacture: unknown Type 1: 34x Corlette External dimensions, width: 1.80 x depth: 1.10 x height: 1.77, foldable with skids Type 2: 17x Corlette External dimensions, width: 1.20 x depth: 1.10 x height: 1.77 foldable with skids Type 3: Tjdpfxoz Dt Tmj Amrjc 29x Upholstered cart Upholstery element cart, 2 levels (extendable, foldable) L: 2200, W: 700, H: 1230 (mm) Type 4: 50x Furniture dolly, 60x35cm, 300kg payload Type 5: 3x Heavy-duty cart 2.20L x 1.0W x 1.80H Condition: used Available: immediately Location: 37269 Eschwege

Condition: used, mileage: 199,650 km, power: 330 kW (448.67 HP), first registration: 05/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space volume: 46 m³, loading space length: 8,150 mm, loading space width: 2,480 mm, loading space height: 2,290 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, ACTROS 2545 L, refrigerated box body, 8.15 m, with BÄR 2,000 kg tail lift * ORTEN swiveling superstructure with roof + 2 x high and low coupling hitch * LASI VDI 2700 with 4-row rear cargo securing system * Vehicle No. for customer inquiries: 4823 * Engine type Euro VI, with OBD-C * Tag axle, 7.5 t, steered, load-compensated, liftable * Predictive Powertrain Control * Secondary water retarder * Turning assistant * Distance keeping assistant * Differential lock, rear axle * Air conditioning * L-cab StreamSpace, 2.30 m, tunnel 170 mm * Radio/navigation system, Bluetooth, comfort * Safety Package * Lane keeping assistant * Environmental badge (green) * Roll stability assistant * Tail lift * Active Brake Assist 4 * Trailer coupling, standard, D40, Rockinger * Attention Assist * Lifting roof, electric * High Performance Engine Brake * Comfort bunk, lower * L-cab * Air suspension, rear axle * Axle configuration 6x2 ENA * Well-maintained with service booklet * Stability control assistant (ESP) * Front axle with air suspension * Hot water auxiliary heater, cab * Actros * Airbag, driver * Trailer brake connection rear, Duo-Matic + Standard * Trailer brake, 2-line, brake connections left * Trailer socket 24 V, 15-pole Tedpfoz Dyhqex Amroc * Chrome package, interior * Electronic brake system with ABS and ASR * Driver's air-suspended seat, comfort * Gearbox G 211-12/14.93-1.0 * Weight variant 26.0 t (8.0/11.5/7.5) * Mercedes PowerShift 3 * Tire pressure monitoring system * Locking system, with central locking * Cruise control * Two-seater * Storage flaps, above windshield * AdBlue tank 60 l, left * Start assist, speed limitation 30 km/h * Heater, electronic compressed air supply unit * Engine OM471, R6, 12.8 l, 330 kW (449 hp), 2200 Nm * Wheelbase 5200 mm * Tires tubeless, 315/70 R 22.5 rear axle * Tires tubeless, 315/70 R 22.5 front axle/steering axle/tag axle * Drawers, under bed * Pre-wiring for CB radio, 12 V, DIN socket * Pre-wiring for toll collection system * Additional stabilizer bar, rear/tag axle * Rear axle with active lubrication, regulated * Digital tachograph, EC, speed, ADR * Tank 630 l, right, 650 x 700 x 1600 mm, aluminum No liability for printing and typographical errors. Sales only to commercial customers. Subject to errors and prior sale. * Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/HIRE PURCHASE offer. * Warranty insurance possible upon request from the insurance company. * TÜV / UVV tail lift inspection / tachograph inspection and installation of OBU device by our partners on site. * Customs license plates for 30 days. * All customs documents for export are possible, but must be requested individually. * TOLL for Toll-Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württ) train station. * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Todpfxjt Dx U Se Amroc Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Todpfxezmd Uij Amrjc Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Condition: used, Year of construction: 2017, Measuring range Z 420 mm Measuring range D 420 mm tool taper SK 50 weight approx. 215 kg Condition: used Todpfxoz Ek D Eo Amroc Technical specifications & accessories: - SK 50 to SK 40 adapter - Pilot 1.0 Software Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: Toded Ih Hqepfx Amroc 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg ----- Total price for the configuration listed above, ex works: upon request ----- ----- Options available at additional cost, upon request: - Stop for longitudinal drilling, height-controlled slot stop via NC axis - Online connection to window software; data cable must be provided on site (Klaes, Prologic 3E, Adulo) - CNC module for venetian blinds and circular milling -Remote maintenance module -Milling spindle with HSK mount -HSK 32 tool holder ----- Plus shipping and installation/training (Technical specifications according to the manufacturer—subject to change without notice!) Translated with (free version)

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable Tsdpfx Aeyrty Temrsc for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Condition: new, Ruchser standard offering with layout for a wooden window manufacturing process, including profiled glazing bead and screw-connected corner joints. ----- Daily capacity: approximately 30 windows Manufacturing process consisting of: Item 1.0 - Article 107850000 ----- 1 piece RU-PWD-H1600/130/4 profile rack, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cut-to-size pieces. 12 support arm pairs per column, permanently welded to the column, 2 center columns adjustable, clear distance between support arms 130 mm, depth of support arms per side 400 mm, support arms with felt padding, with 4 swivel castors, diameter 150 mm, 2 of which with locking mechanism. Item 2.0 - Article 10776000 ----- 1 piece RU-MSTR assembly station for frame hardware 3000 mm long, 600 mm wide 1 piece shelf for hardware 1 piece support table with felt padding Work height adjustable between 900 - 1100 mm (Without screw units) Item 2.1 - Article 6747 ----- 1 piece guide rail with carriage, 3000 mm long Item 2.2 - Article 6308 ----- 1 piece balancer for tools, 3 to 5.5 kg Item 2.3 - Article 10778000 ----- 1 piece RU-STS-A screw feeder with automatic Tsdpfxsytx Uls Amroc screw feeding system POWASERT, consisting of screw feeder and feeder unit ADS-MF4, complete with hose connections, screw feeder ADS 2445 RD with torque cut-off. Set to the screw guide used by the customer. Suitable for the following screw dimensions: Shank diameter: 2.4 - 4.0 mm Shank length 10 - 35 mm Head diameter 5 - 8 mm When ordering, information about the screw must be sent to the manufacturer's factory. Item 3.0 - Article 10782000 ----- 1 piece RU-EW-2S storage rack, double-sided Storage capacity max. 36 pieces of frame profiles in L-shape, screwed together, length 1200 mm, depth 800 mm, height 2200 mm, support beams with felt padding, 4 swivel castors, 2 of which with stoppers Item 4.0 - Article 10766000 ----- 1 piece RU-DR-1 rotary table with travel mechanism for frame assembly. Table with parking brake. Support platform with crossbars and one pull-out section each to the left and right with felt padding. Basic dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, work height 900 - 1100 mm adjustable Item 4.1 - Article 5360, permanently mounted tool storage 1000 x 400 mm for RU-DR-1 Item 4.2 - Article 6354 ----- 1 piece 3-meter travel rail for travel mechanism, rail 10 mm high Item 4.3 - Article 6454 ----- 1 piece travel mechanism with flanged wheels and parking brake Item 4.4 - Article 6788 ----- 1 piece corner screwing device, 1 pair of pneumatically height-adjustable clamping units for fixing the profiles at a right angle. Item 5.0 - Article 10383000 ----- 1 piece RU-DK-T14/34 rotary tilting table with pneumatic tilting mechanism. Work platform with 4...

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1107, total height: 1,700 mm, total length: 1,000 mm, total width: 900 mm, overall weight: 350 kg, For sale is a compact surface grinding machine from the German manufacturer Degen. Model FSM300E. In very good used condition. The machine has seen little use. A very high-quality and precise machine, ideal for tool or prototype construction. Due to its small footprint, it is also suitable for small workshops. Grinding length: 300mm Cross travel: 170mm Todpfxez E S Hbj Amroc Max. distance between magnetic chuck and grinding wheel: 290mm Rapid traverse in height adjustment Magnetic chuck: 300x150mm Space requirement: length 1.0 m x width 0.9 m x height 1.7 m Machine weight: approx. 350kg Includes coolant system, electromagnet, wheel dressing device, and extraction system. The machine runs perfectly and grinds with precision. Can be tested while powered on. Location: 5023 Salzburg.

Condition: used, functionality: fully functional, machine/vehicle number: 33124, mileage: 999 km, power: 235 kW (319.51 HP), first registration: 08/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, MAN PowerMatic 08.12.OD torque converter automatic transmission, operated with steering column lever, manual (DNR selector), heated fuel filter, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full-brake assist, emergency brake assist EBA Plus, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, MAN EasyStart hill start assist, exhaust pipe positioned high and to the left behind the cab, lane departure warning LDW, turning assist, MAN AttentionGuard driver alertness system, preparation for alcohol interlock, traffic sign recognition, distance warning, trailer hitch Rockinger 400G150B (40 mm) Tjdpfoz Ha Ivjx Amrec Cab CC (narrow, short, normal height), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, rain sensor, light sensor, LED headlights, LED daytime running lights, tinted windshield and door windows, lift-up roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multi-function steering wheel, safety automatic, cruise control, digital axle load display (ALM), MAN Media System Navigation Advanced 7-inch with navigation and Bluetooth hands-free system, rear view camera, smoker's package, 2x LED rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, sun visor on driver's door, sun shield Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 11.5 m³ (sludge compartment approx. 10.5 m³ / water compartment approx. 1.0 m³), water compartment is welded into the front of the container with inspection opening, water compartment level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow line, 2x water tanks, each approx. 0.5 m³, on the left/right side of the container made of plastic, rear flap hydraulically opens upwards over the entire cross-section with pipe rupture protection, hydraulic latch locking, sludge compartment level indicator with external scale with divisions every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge apron made of stainless steel, 2 pneumatically operated slide valves, container discharge: free discharge through the lower suction connection or by tipping to the rear, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the control panel, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, hooks on the bottom flap for transporting long continuous hoses, waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the

Condition: used, functionality: fully functional, control type: manual, degree of automation: manual, actuation type: manual, sheet thickness (max.): 1 mm, Manual guillotine shear JÖRG 4111 with a robust, heavy-duty workshop construction. Designed for precise manual cutting of sheet metal. This machine is suitable for metalworking workshops, maintenance departments, small-series production, and vocational training facilities. Technical specifications: Todpoz Dqywjfx Amrsc • Manufacturer: JÖRG • Model: 4111 • Machine type: manual mechanical guillotine shear • Maximum cutting length: 1,020 mm • Maximum cutting capacity in mild steel: 1.0 mm • Maximum cutting capacity in aluminum: approximately 2.0 mm • Manual operation – no electrical connection required • Robust, stable workshop construction • Compact design • New cutting blades installed The machine is used and shows normal signs of previous industrial use. Overall visual condition is good. A simple, reliable, and economical machine for straight cutting of sheet steel, aluminum, and other thin sheet materials. Internal reference: 48979-113 The machine is located in Latvia and is available immediately. Loading assistance is available. Transport within the Baltic States and to other European countries can be arranged upon request. The machine is sold as shown in the photographs. Inspection is possible by prior appointment.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,110 mm, travel distance Z-axis: 1,800 mm, number of axes: 3, This 3-axis MASSIVIT 1800 PRO was manufactured in 2019. It features a maximum printing volume of 1,450 × 1,110 × 1,800 mm and a maximum linear printing speed of 300 mm/s. The machine is available with either one or two printing heads, with the two-head configuration available at an additional cost. If you are looking to get high-quality large-scale 3D printing capabilities, consider the MASSIVIT 1800 PRO plastic 3D printer we have for sale. Contact us for further details. Tsdsz Hdflepfx Amrjc • Printing technology: Gel Dispensing Printing (GDP) • Printing heads: Two machines available: one equipped with 1 printing head and the other with 2 printing heads. The machine with 2 printing heads is available at an additional cost. • Max build volume (X/Y/Z): 1,450 × 1,110 × 1,800 mm • Max linear printing speed: 300 mm/s • Z-axis printing speed: up to 350 mm/hour (specified for a 1 m diameter cylinder) • Layer thickness / resolution: 1.3 mm (Normal), 1.0 mm (Quality), 0.8 mm (High Resolution) • Special printing modes: Mega-Quality, Variable Resolution, Mold Mode • Supported materials: Dimengel 90 (all-purpose), Dimengel 100 (translucent), Dimengel 300 (transparent) • Material system: Single-material • Software: Integrated software incl. Massivit SMART Pro Slicer and Estimator Tool; advanced slicing algorithms; Mold Mode; Variable Resolution; Mega-Quality • Monitoring & automation: Automatic time-based cleaning; camera on printing head tip; remote monitoring; remote operation/support via computers, tablets, and phones • Current machine status: Two units available; being replaced by new machines. Replacement container ETA 29 Oct 2026; installations expected early November. Both units purged/drained and currently not in operation.

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Tedpfxjxcy D Es Amroc Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm Tedpfsrfd Thox Amrec turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Condition: like new (used), Year of construction: 2021, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Tedszzxb Hopfx Amrsc Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: used, Year of construction: 1999, curved belt conveyor curved belt 109° right Transnorm TS1500-100 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 109° right TS 1500-100 belt bend conveyors Year of construction: 1999 Angle: 109° Tedjk Aa E Aopfx Amrsc Direction: Right Nominal radius RN: 600 mm BN width: 600 mm Speed: v = 1.0 m/s Strap type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: Lxwxh = 2.4 x 1.10 x 0.40 m Weight: 150 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2003, The Manroland Roland 504-L is a high-performance four-color sheetfed offset press, manufactured in 2003 and currently operational in a printshop in Germany. With a 520 x 740 mm format and 170 million impressions, this press is built for demanding, high-volume production environments. The Roland 504-L is equipped with coating units for added versatility, and features semi-automatic plate change (PPL) for quick job turnarounds. Automatic format adjustment and non-stop devices for feeder and delivery ensure seamless operation and minimal downtime. The press also includes automatic washing devices for ink rollers, blankets, and impression cylinders, simplifying maintenance and improving productivity. Advanced features such as inking unit temperature control (Tempcontrol NT3), a powder device (Hitronic-S Grafix), and a dampening solution cooling unit (Technotrans) guarantee consistent print quality and optimal operating conditions. The integrated Grafix IR dryer further enhances drying efficiency, making this press a comprehensive solution for high-quality, high-speed printing. Format: 530 x 740 mm Min. Size: 260 x 400 mm Tjdpfx Amoxnbiaeroc Max. Size: 530 x 740 mm Min. Paper Thickness: 0.04 mm to 1.0 mm Max. Paper Thickness: 0.04 mm to 1.0 mm Speed: 16,000 sheets per hour Net Weight: 24000 kg Equipment: 4 Colors Offset press with Coater RCI with CCI Color Pilot Press Pilot Roland Matic Delta Dampening with Technotrans Impression Cylinders, Blankets and Rollers Washers PPL Auto. Plate Loading Inking unit temperature control (Tempcontrol NT3) Powder device (Hitronic-S Grafix) Coating Unit with Extended Delivery Air Glide Grafix IR dryer

Condition: used, Year of construction: 2016, Format: 400 x 770 mm Power: 230V / 400V Net Weight: 350 Kg Measurements: (LxWxH):105 x 135 x 130cm Equipment: Mechanical speed: 250 pieces/hour Blank Sheet Width: Minimum 250 mm to Maximum 770 mm Blank Sheet Height: Minimum 150 mm to Maximum 400 mm Allowable Board Thickness: From 1.5 mm up to 3.5 mm thick rigid greyboard Cutting Width (Horizontal): Adjustable from a narrow minimum of 6 mm (perfect for thin hardcover book spines) up to a maximum width of 700 mm. Cutting Height (Vertical): Adjustable from 127 mm up to 355 mm. Automatic 3-Panel Segmenting Automated Material Lift & Feed Integrated Sheet Transport Conveyor Heavy-Duty Rotary Shear Knife Block Todpfoyxqwkjx Amrsc Digital Operator Display Panel Maximum Sheet Feed Capacity: Accommodates a raw board thickness range commonly spanning 1.0 mm up to 4.0 mm