Used Winkworth Steam Jacketed Kettle for sale (1,252)

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy 20FT ISO Tank Container 23,950L / 1 compartment Tjdpfx Aey Sxg Hsmrjc IMO-1 Bottom discharge Steam heating DIN 17440 1.4401 22T6 2.5Y-+ CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable materials: Chemicals, construction water, fuel, wastewater Weights Tare weight: 3,840 kg Payload: 30,160 kg Gross weight: 34,000 kg Functional Cargo compartment volume: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 comp. (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: used, functionality: fully functional, This is a handwashing and slop sink from the renowned manufacturer Blanco, in a robust design, not comparable to cheap manufacturers with inferior quality. You will receive an invoice with VAT shown. Our service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded appliances at fair prices Professional and competent advice – before and after purchase Free shipping within Germany (excluding islands/mountain stations) Provision of operating instructions, connection diagrams & spare parts Trade-in of your combination steam oven from model year 2004 onwards Complete range of accessories at attractive prices Condition: Used, fully functional Product description: W x D x H: 700 x 500 x 850/560 mm Sink size: Length: 340 mm Width: 240 mm Height: 150 mm Todszz Ibpspfx Amrjc Length: 370 mm Width: 340 mm Height: 150 mm Design: The handwashing and slop sink are arranged one above the other for space-saving reasons. Consisting of a compact, self-supporting construction, standing on four longitudinally seam-welded square tube feet (40x40x1.25 mm each). The ends of the uprights are equipped with height-adjustable plastic screws (+/- 15 mm) to compensate for uneven floors. Both sinks are fitted with three-sided stainless steel panels, with the cover of the handwashing sink arranged at an angle. The sinks are deep-drawn in a single process and seamlessly welded into the cover. The covers are bent over 50 mm on three sides. The handwashing sink is bent up 50 mm at the back with an outward flange. The slop sink is fitted with a raised profile edge (splash guard) all around. The handwashing and slop sink combination is equipped with plug-and-overflow valves 1 1/2″ and a support grid made of stable plastic (material: ASA). The water supply to both sinks is provided by a single-lever mixer tap 1/2″. Supply and drain lines as well as the tap are included separately and can be easily installed using the operating and installation instructions. Technical text HAU-P 5×7/ Version 3.0/ U. Herbstreith Technical data: Material: CNS 18/10 Material no.: 1.4301 Manufacturer: BLANCO GmbH + Co KG Type: HAU-P 5 x 7 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (AGB).

Condition: good (used), Year of construction: 2007, total length: 6,060 mm, total width: 2,550 mm, total height: 2,670 mm, = Additional Options and Accessories = - ADR = Notes = Welfit Oddyl 20FT Tank Container 24,870 L / 1-compartment UN Portable T-11 L4BH steam-heating bottom-discharge 2.5Y + CSC test: 02-2027 = Additional Information = General Information Year of Construction: June 2007 Model Year: 2007 Weights Unladen Weight: 3,650 kg Payload: 32,350 kg GVW: 36,000 kg Functional Load compartment volume: 25,064 l Body manufacturer: Welfit Oddy TC 25,070L Number of compartments: 1 Todpfxoy A Sktj Amrec Condition Technical condition: good Visual condition: good Further Information Please contact Arne Honingh for further information.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1407, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine (re-controlled 2014) Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Previously in professional denim-finishing production (MASI "Pesumasin No 3") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Tjdpfx Aozmt S Domroc Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional rigging required (heavy industrial machine, ~10 t). Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: H8966378, power of the servo motor: 400 W, input voltage: 400 V, type of input current: three-phase, pneumatic connection: 6 bar, compressed air connection: 6 bar, Brother RH-9820-02 Electronic Buttonhole Sewing Machine – Complete Industrial Workstation For sale is a Brother industrial electronic buttonhole sewing machine, model RH-9820-02, y. 2009 offered as a complete workstation. This machine is designed for automated buttonhole sewing in professional garment production. It features an electronic programmable control system enabling consistent stitch quality, repeatable sewing operations and efficient industrial production. The programmable control panel allows adjustment of sewing parameters, cycle settings and operation modes depending on the production requirements. The machine has been used in a professional garment factory environment and was operational prior to factory shutdown. Its industrial construction supports precise and efficient buttonhole production in continuous factory use. Includes: • Brother RH-9820-02 buttonhole sewing machine • Brother RX9820 electronic control unit • Integrated motor • Industrial worktable with steel stand and wheels • Thread stand • Foot pedal control • Pneumatic system and air preparation unit • Integrated control electronics and operator panel Technical Details: • Manufacturer: Brother Industries, Ltd. • Model: RH-9820-02 • Type: Electronic buttonhole sewing machine • Control unit: Brother RX9820 • Power supply: 400V / 3-phase / 50–60 Hz Tjdsy Ahmkepfx Amrjc • Programmable electronic control interface • Automatic sewing cycle functionality • Pneumatic system integrated • Made in Japan Key Features: • Automated buttonhole sewing operations • Consistent industrial stitch quality • Electronic programmable control system • High repeatability for production use • Integrated pneumatic components • Heavy-duty industrial construction • Factory-grade sewing workstation Condition: Used industrial condition. Operational prior to factory shutdown. Stored indoors. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications: • Buttonhole sewing • Shirts, trousers and jackets • Denim production • Workwear manufacturing • Industrial garment production • Textile manufacturing operations Location: Valga, Estonia Removal & Transport: Buyer responsible for dismantling and transport.

Condition: used, Year of construction: 2004, Filling content - 150 ltr. Agitator - 0.75 kW Bubble - 800mm Overall height - approx. 270 cm Tedpfez Aizyox Amroc Filling opening - approx. 35 cm Spout - approx. 20 cm Tap - inch Smoke pipe - approx. 18 cm Fuel - wood / steam

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: A79N517901, input voltage: 230 V, travel distance X-axis: 450 mm, travel distance Y-axis: 360 mm, overall weight: 720 kg, total length: 3,040 mm, total width: 1,360 mm, total height: 1,750 mm, nominal power (apparent): 1 kVA, rotational speed (max.): 1,000 rpm, rotational speed (min.): 100 rpm, Brother BE-1206B-BC-PC Industrial 6-Head Embroidery Machine Professional 6-Head Commercial Embroidery System for High-Volume Production The Brother BE-1206B-BC-PC is a professional multi-head industrial embroidery machine designed for continuous commercial production of logos, workwear, uniforms, caps, promotional textiles, and fashion garments. Featuring six embroidery heads with twelve needles per head, the machine enables simultaneous embroidery of multiple garments while maintaining excellent productivity and consistent stitch quality. The machine has been used in professional garment manufacturing and is offered as part of the MASI JEANS factory liquidation. Technical Specifications • Manufacturer: Brother Industries, Ltd. • Model: BE-1206B-BC-PC • Machine Type: Multi-Head Industrial Embroidery Machine • Configuration: 6 Embroidery Heads • Needles: 12 Needles per Head • Total Needles: 72 • Maximum Embroidery Speed: Up to 1,000 stitches per minute • Embroidery Area: Approximately 360 × 450 mm per head • Stitch Length: Adjustable • Control System: Digital PC-Controlled Programming Interface • Automatic Thread Change: 12 Colors per Head • Automatic Thread Trimming • Heavy-Duty Industrial Frame • Integrated Production Table Key Features • Six-head simultaneous embroidery system • High-volume commercial production • Automatic 12-color thread change on each head • Automatic thread trimming • Digital pattern programming • Accurate stitch positioning • Suitable for flat garments and various embroidery applications • Heavy-duty industrial construction • Designed for continuous production environments • High productivity with consistent embroidery quality Includes • Brother BE-1206B-BC-PC embroidery machine • Integrated industrial table • Thread stand • Embroidery hoops as shown • Digital control interface • Industrial frame Applications • Corporate logo embroidery • Workwear and uniform production • Promotional textiles • Sportswear • Fashion apparel • Caps, jackets and bags • Contract embroidery production • High-volume embroidery workshops Condition • Used industrial condition • Previously used in professional garment production • 5 embroidery heads fully operational • 1 embroidery head requires repair and is currently not operational • Good overall mechanical condition • Normal cosmetic wear consistent with industrial use • Available for inspection before dismantling Tedpfxezib Apj Amrec Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the size, weight, and precision alignment of the machine. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional Tsdpfxozgw Ebe Amrec • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: excellent (used), Year of construction: 2004, Wachtel Infra Bakery Oven Todpfx Amjz A Acbjrjc - Used - Year of manufacture: 2004 - Area: 8 square meters - 4 chambers (1.2 x 1.6 m) - Manual control - Steam generation for all chambers - Very good technical condition - Technically inspected - Collection from warehouse / shipping option available - Price on request

Year of construction: 2015, condition: new, functionality: fully functional, This is an UltraVent hood from the premium manufacturer Rational, type UV 201/E, suitable for SCC and CMP 201 combi-steamers from 10/2011 up to the iCombi series (this hood is no longer compatible with the iCombi series), including a connection kit. The hood is new, unused, and in its original packaging. The list price of the hood is: €4,329 net / €5,151.51 gross Our price: €1,988.23 net / €2,366 gross You will receive an invoice with VAT shown. Service: We will gladly connect you with a certified Rational customer service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new products. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our appliance service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded appliances at fair prices. Professional overhaul/inspection & expert cleaning, tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This UltraVent hood features patented condensation technology, which binds and removes steam and vapors. Elaborate measures for exhaust air system installations are a thing of the past. An external connection is completely eliminated. Installation is easy and can be done at any time, even retroactively. Ideal for use in small kitchens, in sales areas of butcher shops, bakeries, snack bars, and catering services. Technical data: W x D x H: approx. 886 x 1226 x 450 mm Power connection: V: 230 Serial number: EF1UE15125012465 Todpfjz Azb Eex Amrsc Year of manufacture: 2015 Further information: Integrated lighting Exhaust air capacity: approx. 1000 m3/h Condition: New, unused, in original packaging, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is exclusively subject to our general terms and conditions (AGB).

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm Todpfx Amsz Az Duerec

Condition: used, Year of construction: 2019, Overview Set of three cylindro-conical fermentation tanks built by Shandong Tiantai in 2019 - two of 1,000 litres and one of 7 BBL (approx. 820 litres). All three vessels are built in stainless steel SS304, rated for 4-5 bar working pressure and fitted with a cooling jacket with glycol inlet and outlet, a level gauge, an inward-opening side manway and a bottom outlet valve. The tanks stand on welded legs and are still installed at the site in Spain, where they can be viewed by appointment. A compact fermentation block for a craft brewery adding or replacing tank capacity. Technical data - Year of manufacture: 2019 - Units: 3 tanks - 2 x 1,000 L and 1 x 7 BBL (approx. 820 L) - Dimensions (approx.): Ø1210 x H2550 mm (1,000 L tanks), Ø1060 x H2550 mm (7 BBL tank) - Material: stainless steel SS304 - Design: cylindro-conical, isobaric pressure vessels on welded legs - Working pressure: 4-5 bar - Cooling: cooling jacket on every tank, glycol inlet and outlet - Fittings: level gauge, inward-opening side manway, bottom outlet valve Todpfx Aoz Atq Somrjc Scope of Delivery - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 7 BBL (approx. 820 L) | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 Condition Used, still installed at the current site. Viewing possible by appointment. Availability Immediately available.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Pressure range: -1 to 3 bar (drying chamber), 6 bar in the double jacket Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Tjdpfx Ajitcvuemrec Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Double coat, Mechanical seal, PT100 thermometer, Shaft heating with Maierkopf HWR 225, Sight glass, Technical documentation. Condition: Used very good Price: on request

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 070826, Equipment: CE marking, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour (If you need more, you can write, but send us the layout of the manufacture place.) Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. ​Technical Maintenance & Stability: We provide expert maintenance, diagnostics, and spare parts availability to prevent unplanned downtime and ensure your lines run smoothly. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs ( Blanching area 10m ) 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs 7- Conveyor line – 8pcs All line: 24m long Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine. Tsdpfjv Dftxex Amrsc

Condition: good (used), Year of construction: 1982, functionality: fully functional, year of last overhaul: 2002, type of input current: three-phase, For high-temperature dyeing of fabrics (e.g. polyester, mixed fiber materials) Tsdpfxofqmx Tj Amrsc Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Max. temperature: 140–144 °C Pressure: approx. 3 bar (3 kg/cm²) Heating: steam heated Bath volume: 9170 liters Material capacity: approx. 300 kg (typical) Useful working width: 2000 mm Fabric roll diameter: 1100 mm Cylinder diameter: 324 mm 2 main driven cylinders (reciprocating) Dosing system (for chemicals) Additive tank Automatic program control Temperature and pH control

Year of construction: 2006, condition: used, Technical data of the basic equipment Electrical connection values: Device total 230/400V 50Hz 50A 35 KW Motor washing pump 400/690V 50Hz 9,5A 4KW Heating elements: (3x9kW) 230/400V 50/60Hz 13,5A 9KW Motor steam extraction 230/400V 50HZ 1.1A 0,45kW Motor rotary basket drive 230/400V Todpfx Asn Nyt Hsmrsc 50Hz 1.1A 0.37kW Pneumatic connection values: Compressed air supply line min. 6 bar / max. 10 bar Performance data: Wash pump flow rate 280 l/min Delivery pressure washing pump 5 bar Dimensions, weights, contents data: Liquid volume tank 1 washing 650 L liquid volume tank 2 rinsing 265 L perm. basket load 750kg usable basket diagonal 1400 mm usable height in the unit 800 mm loading height 920 mm height approx. 3010 mm width approx. 2365 mm depth approx. 1665 mm empty weight approx. 1320 kg

Condition: new, overall weight: 65 kg, Stainless steel dispenser for pizza and other doughs, with built-in stainless steel container, more than 5 pieces available With a capacity of 30 kg, with a dosage of 50-800 gr, tare weight: 84 kg, With portion counter. Dosing with a tolerance of +/- 10%: 50/90 - 80/130 - 120/180 - 170/230 - 220/300 grams with safety switch on kettle lid. Tjdpor Uimwjfx Amrec Size: 510*830*660mm 400V voltage, 1KW power VIDEO: On youtube

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Tjdpfx Amoy Ua Rxsrjc Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm 270 kW, 411 amp canopy with electric hoists with a fine-mesh band Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 9.000 x 2.600 x 3.700 mm in good condition Tjdoz Ep A Hepfx Amroc Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: used, Bongard MG Range Gas or oil-fired, depending on configuration Heating power: 110 kW Gas connection: 3/4" galvanized pipe Trolley: 800 × 1000 mm Trolley: 780 × 980 mm Maximum load: 200 kg 180 to 216 baguettes (250 g each) 18 levels for baguettes 108 to 135 loaves (400 g each) Tedpjzyafdsfx Amrec 15 levels for loaves Stainless steel baking chamber Rotating tray Pulsed steam injection Maximum temperature: 280 °C Power supply: 3N~400 V Electrical protection: 16 A Water pressure: 2.5 to 4 bar Water connection: 3/8" or 12/14 mm pipe Oil connection: 10/12 mm copper pipe Smoke exhaust: Ø 200 mm Dimensions: 2251 × 2062 × 2492 mm Depth with door open: 2774 mm Minimum door opening: 1020 mm Net weight: 1830 kg Key advantages Capacity of 180 to 216 baguettes (250 g each) Production of 108 to 135 loaves (400 g each) Rotating trolley loaded up to 200 kg Baking chamber entirely made of stainless steel Adjustable blowing vents Two valves for programmable steam evacuation Retractable and removable ramp for loading Front access to the burner and technical components Reinforced door with double-glazed, ventilated glass, removable

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Power: 11 kW Tedpfx Aeyhd Imjmrsc

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan Todpoz Dv Uyjfx Amroc - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: used, - Bongard 8.64 MG Series 4 - External dimensions: W 1440 x D 2700 x H 2600 mm - Baking chamber: W 680 x H 1900 mm - Rotating rack: 600 x 800 mm, 19 levels - Baking capacity: Up to 152 baguettes per batch - Rack rotation diameter: 1120 mm - Total baking surface: 9.1 m² - Heating capacity: 70 kW - Connection power: 0.18 kW - Maximum temperature: 280°C - Lifting mechanism: Rack with automatic lifting - Gas burner included for fast and even baking - Opticom electronic controls for precise baking parameter management - Pulsed steam injection, ideal for crispy and golden breads - Ergonomic handles and controls positioned on the right for easy operation - Fresh air intake at burner for optimal performance - Voltage: 400 V / 3-phase - Weight: 1390 kg - Serial number: 930000015837 - Year of manufacture: 2014 Bongard 8.64 Series 4 Rotary Rack Oven – Gas or Oil Fired – Used A Compact Solution for Efficient and Uniform Baking Lrjy Tdewr T Edjxugsr Discover the Bongard 8.64 Series 4 Rotary Rack Oven, an outstanding second-hand solution offering both compactness and high performance. Designed to meet the needs of demanding professionals, this oven is ideal for maximizing production efficiency while optimizing your bakery space. Tsdowr T Edopfx Amroc Superior Performance for Even Baking The Bongard Series 4 Oven stands out thanks to advanced technologies that ensure uniform and top-quality baking: - Soft Flow Ventilation: This technology provides gentle, uniform air circulation, perfect for baking delicate goods such as fine pastries and rolls. Thanks to even heat distribution, your creations will remain intact and achieve ideal baking results. - Efficient Steam System: Equipped with structured cast iron gutters, the oven produces high-quality steam to improve the development of your bakery goods. For greater needs, optional ESG steam units can boost steam production capacity, ensuring optimal performance. Durable and Practical Design The Bongard 8.64 Series 4 Oven is built to withstand the rigors of intensive production environments while providing excellent user comfort: - Robustness and Longevity: Fitted with a high-performance refractory stainless steel heat exchanger and a reinforced base, this oven is engineered for outstanding durability. Electric elements are rigorously selected for maximum service life. - Simplified Maintenance: The seamless stainless steel baking chamber facilitates cleaning. Features such as the raised-edged floor and retractable steam units minimize residue accumulation. The listing was translated automatically. Translation errors are possible.

Condition: excellent (used), Year of construction: 2011, operating hours: 361 h, functionality: fully functional, machine/vehicle number: 7428122100001.105, pressure: 6 bar, power: 16,500 kW (22,433.73 HP), temperature: 120 °C, operating temperature: 120 °C, total height: 4,300 mm, total length: 8,700 mm, nominal heat output: 165 kW (224.34 HP), total width: 3,700 mm, tank capacity: 33,500 l, empty load weight: 35,000 kg, We offer this Viessmann VITOMAX 200 hot water boiler in very good condition, manufactured in 2011. It is currently stored and preserved with nitrogen. Manufacturer: Viessmann Model: VITOMAX 200 Year of manufacture: 2011 Type: hot water boiler Operating hours: 361 If you have any further questions or require additional information, please do not hesitate to send us a message or call us. Tjdpfx Aezlc Edjmrec Ioan Munteanu

Condition: excellent (used), JD manufacturing kettle crisps batch fryer. Gas fired. 55-60kg every 8-10 mins depending on product. With pumps and Valve systems. For "hand cooked" crisps. Frying area is approx. 1.2 m wide x overall length 3 m. Tsdpfx Amez E Skgjrjc I can supply the whole line for producing crisps 1ton a hour.