Used Welding Turntable, Container Turning Device for sale (26,698)

Condition: good (used), BILZ Size 3 Radius Lathe Turning Diameter 150 - 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Nlsdev Sag Nepfx Afaoa DE - 44143 Dortmund - Wambel

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Nlsdpfoyqr Sxex Afaoa

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm -Peak height: 870 mm -Speed: electrically continuously variable 0-3 rpm Nledpfxsxm Sqro Afaja -Drive: Servo motor 1/1.6 kW with cooling, see photo of nameplate -Direction of rotation: Right/left rotation -Transport dimensions: 3890/900/H1420 mm -Weight: 880 kg

Condition: used, machine/vehicle number: 008411, Max. panel width: 1200 mm Max. panel length: 2700 mm Rotation system: double cone Nodpfx Afoyngy Eeaela Rotation direction: from long to transverse

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece 120 T Dimensions (Estimate) Length 60000 mm Width Nlsdpfx Afskwcnzoaoa 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Nledpfx Ajkwcn Ejfaja Year: 2007 Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator Njdpfx Afoyv H Eljaola - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: used, functionality: fully functional, for extended medium to heavy-duty applications. With switchable power levels and mode control for a wider range of uses. Nlsdpeyx Sq Eefx Afaoa • Cleans and passivates in a single operation • Can process any thickness of stainless steel • Electropolishing possible • Low operating costs • Cost-effective consumables and spare parts, saving time • Up to 10 times faster than pickling paste • No reworking required • No need for regrinding or polishing Flexible and robust • Ideal for large objects • Durable high-performance brush • Splash-proof housing • Machine does not overheat • Cable can be extended up to 12 meters • Operates at 250 watts • Can be powered by a generator

Year of construction: 2020, condition: ready for operation (used), Load capacity: 16000kg, swivel angle: 90°, swivel time: approx. 50s, table dimensions X/Y: 1600mm/1600mm, table support height: 1100mm, machine dimensions X/Y/Z: approx. 2600mm/1800mm/2800mm, weight: approx. 4400kg. An on-site inspection is possible. Nsdpfxoyxgrke Afasla

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 1500kg- Own weight: 300kg- Insertable workpiece diameter: approx. 50 - 3000 mmm- Roll diameter: 250mm- Roll width 50mm - Rotation speed approx. 100 - 2,000 mm/min- Two-pedal foot switch potentiometer for stepless speed control Nljdpfx Asd Iuqlefasa

Year of construction: 2020, condition: new, Height-adjustable turning device under load for the machining or assembly of turbine rotors, rollers or shafts. Load capacity: 20.000kg stroke: 400mm Roller diameter: 350mm Applicable component diameter: D180mm - D900mm Track roller material: TEXMAT-500 Nljdpfx Afofw Afkeaea

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 15000 kg- Own weight: 960kg- Insertable workpiece diameter: approx. 50 - 3200 mm- Roll diameter: 250mm- Roll width 240mm - Rotation speed approx. 100-2,000 mm/min- Two-pedal foot switch- Potentiometer for stepless speed control Nlsdpsd Iuqaofx Afasa

Condition: new, Year of construction: 2025, Protec welding rotary table 5000 Kg load capacity speed infinitely variable 0,05 - 0,5 rpm manual remote control height 600mm diameter 1500mm Njdpfoid Szcsx Afaela Foot remote control extra charge

Condition: new, Year of construction: 2024, Protec KT 5000 welding rotary table Complete set incl. double foot remote control and hand remote control with digital display 5000 Kg load capacity Diameter clamping disc 1500mm Height horizontal 1500mm Height tilted to middle 1500mm Nlsdpfofkt Ebox Afaoa Speed infinitely variable from 0.01 to approx. 0.7 rpm Inclination up to 120 length 2100mm width 1500mm

Condition: new, Year of construction: 2024, table load: 2,000 kg, Welding rotary table 2000 Kg load capacity Nljdpfx Afsgfqk Teasa with hand and foot remote control diameter 1200 mm Bore 100mm height 580mm speed stepless 0 - 0,6 rpm Motor AC 380 V

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 Njdpoyc Nzusfx Afajla • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Nlsdpfx Ajdzql Ssfasa Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with DC and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition Nlsdpfx Asdzqa Hefaea

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle Njdpfx Afsdzqacsaola 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) Nlodpod N E Rvofx Afaea - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Nlsdpoyrg Hysfx Afaea

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Nsdpfx Asyrg H Hsfajla

Year of construction: 2026, condition: new, functionality: fully functional, AVANTECHNO 411 is a professional mobile system for line boring and internal build-up welding, designed for precision restoration of worn cylindrical bores and pivots directly on site. The system integrates boring, internal welding (overlaying), facing, drilling, and thread cutting into a single portable unit. The equipment is mounted directly onto the workpiece, allowing on-site repair without the need for disassembly or transportation of heavy components. The coaxial centering system ensures high concentricity when restoring spaced bores. Technical specifications: - Boring diameter range: Ø 22 – 400 mm (up to 1,000 mm with additional kits) - Internal build-up welding range: Ø 25 – 400 mm - External build-up welding range: Ø 20 – 250 mm - Accuracy: up to 0.01 mm (H7 tolerance field) - Feed rate: 0 – 0.5 mm/rev - Maximum spindle speed: up to 450 rpm - Continuous feed travel: 250 mm (extendable via bar length) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 3 kW - Operating temperature range: −30°C to +40°C - Weight of electromechanical module: approximately 42 kg Nljdpfxoyq Rlde Afaea Functional capabilities: - Single-pass coaxial restoration of multiple aligned bores - Internal hole welding with continuous spiral overlay technology - Facing of flanges and mounting surfaces - Restoration of bearing seats and circlip ring grooves - Restoration of blind bores - Quick change of boring bar with welding shaft without the need for re-centering Applications: Suitable for maintenance and repair of: - Excavators, loaders, and construction equipment - Mining machinery and processing equipment - Agricultural machinery - Cranes and lifting equipment - Industrial and heavy mechanical assemblies Advantages: - On-site repair without disassembly - Significant reduction of downtime and transport costs - Compact and portable design - Manufactured in the EU with a 24-month warranty - Engineered for heavy-duty industrial applications

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 220 V, overall weight: 50 kg, warranty duration: 24 months, AVANTECHNO 611 is a heavy-duty mobile line boring and internal welding system, designed for precise on-site restoration of worn cylindrical bores and pivot joints. The machine combines boring, internal welding, facing, drilling, and thread cutting in a single portable unit. It mounts directly onto the workpiece, allowing repairs without dismantling heavy components, while maintaining precise coaxial alignment of multiple bores. Technical specifications: - Boring diameter range: Ø 62 – 600 mm (Ø 32 – 1,000 mm with additional kits) - Internal welding range: Ø 350 – 1,000 mm - Accuracy: up to 0.01 mm (H7 tolerance) Njdpfxsyq Rivo Afaola - Feed rate: 0 – 0.5 mm/rev - Maximum bar rotation speed: up to 300 rpm - Continuous feed travel: 300 mm (extendable) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 2.5 kW - Weight of electromechanical unit: approximately 50 kg Applications Suitable for repairing: - Excavators and construction machinery - Mining and industrial equipment - Agricultural machinery - Cranes and lifting equipment - Heavy-duty mechanical assemblies Advantages: - On-site repair without disassembly - Reduced downtime and transport costs - Portable and robust construction - Manufactured in the EU with a 24-month warranty - Designed for heavy industrial applications

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control Nodpfxopy Uzyj Afajla - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.