Used Weiz Typ B for sale (40,636)

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Rcsdpfxsytr Sws Ahcof Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Year of construction: 1969, condition: good (used), Steel chain hoist, type T 302, 400 volts, 2 lifting speeds, chain length 3 meters. Rcjdpjd E Akksfx Ahcjf

Condition: new, functionality: fully functional, machine/vehicle number: Typ-U6M_Angebot, empty load weight: 210 kg, maximum load weight: 540 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,500 mm, loading space height: 150 mm, suspension: other, Year of construction: 2026, Koch trailer, 150x250cm, 750kg, "Type U6M" Our best-selling, unbraked Koch trailer, Type U6M, with a body made entirely of anodized aluminum. Car trailer, Type U6M, with loading dimensions of 150 x 250 x 25cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 540kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features: 10-year warranty (unique) Double-walled, anodized aluminum side panel, 30mm (unique) Side panel with a load securing system in V2A stainless steel (unique) 1 x 22/200 aluminum ramp, mounted on the side Side panel fastening with 8 mm V2A stainless steel screws (unique) Support wheel, standard 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional features: 15mm thick, stable screen-printed wooden floor, slip-resistant birch plywood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185/70 R13 tires, balanced and suitable for 100 km/h Steel sheet fenders, fastened with 8 mm stainless steel screws Rcjdpfx Asi R Hxkohcsf 12-volt electrical system, 13-pole plug with reversing light 2 rear supports, as shown, are available as accessories for €102.00 Other Vehicle registration document / registration certificate, Part 2 If you would like to purchase this trailer or have any further questions, please use our internal box trailer "Type U6M_Offer".

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H101-000-000, conveyor belt width: 1,420 mm, conveyor belt speed: 1,700 mm/s, total width: 1,420 mm, power: 4 kW (5.44 HP), axle spacing: 2,450 mm, construction width: 1,420 mm, Center distance: 2,450 mm Rodpfx Aheu S Adrecjcf Belt width: 1,200 mm Overall width: 1,420 mm Cheek height: 310 mm Conveyor speed: 1.7 m/s Belt quality: EP 400/3 3:1.5 mm normal quality Profiling: Steep conveyor belt, PB 900 mm / PH 32 mm Drive: Van der Graaf drum motor Power: 4.0 kW Motor protection class/efficiency class IP 55 / IE3 Drive drum: Ø 215 mm (drum motor) Rubber coating: Metallic surface Idler drum: Ø 190 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø50 mm Support rollers: Ø 63.5 mm fitted with buffer rings Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm / support ring Ø 108 mm Side guide rollers: Ø 50 mm Clamping station: M16 threaded spindle

Condition: used, Year of construction: 2004, We are offering this used STORK MPS B.V. bone separator. Type no: DMM50; Serial no: B27-13B; Order no: BX152004; Voltage: 400V; PHASE/Hz: 3/50; Netherlands; Year of manufacture: 2004. Control cabinet is not included. Net price: 7,000 EUR. Price negotiable. Rjdey Hi A Ujpfx Ahcocf

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: GER, Technical data: 1 Abus VS column-mounted slewing crane, nominal load 500 KG Maximum load at full outreach: 500 KG / 0.5 tons Height: approx. 3.8 m, under jib: approx. 3.4 m Outreach: approx. 4 m, hook height: approx. 3 m Base plate approx. 60x60 cm Total weight approx. 700 kg Rcsdjy Hgnnopfx Ahcef Including Abus GM4 chain hoist (year of manufacture 2018) with pendant control (2 lifting speeds) Connection: 400V 16A, slewing range 360° Crane is disassembled and immediately available Article location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping via forwarding agent or collection by appointment

Condition: used, Year of construction: 1978, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Rceder Igtkspfx Ahcef Shipping by courier or collection by appointment

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 Rsdpfx Ahevwgagscscf weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: new, working width: 6020 x 1000: ca. 140weight approx.: 2 tomessurements (LxWxH): ca. 7000 x 1700 x 1500: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 6020 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE Redpfxerzx Emo Ahcecf - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 4010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 4010 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm). Rsdpjr A Ntwsfx Ahcscf

Condition: new, working width: 3010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 3010 Rodpfx Ajrzx Dzshcocf - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 4010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 4010 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL Rcjdpfsrzx D Nsx Ahcof - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 5020: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 5020 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE Rcjdsrzx Ebepfx Ahcef - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 3010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 3010 - HIGH PROFITABILITY - FULLY HYDRAULIC Rsdpfxerzx Dwo Ahcscf - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 5020: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 5020 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE Rsdjrzx Efepfx Ahcecf - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 6020 x 1000: ca. 140weight approx.: 2 tomessurements (LxWxH): ca. 7000 x 1700 x 1500: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 6020 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT Rcjdporzx Eiofx Ahcof The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: excellent (used), Charger Timetronic ECO JH Redpfx Aew R Nvnjhcecf Type E230VG24/50B-ETIS Year of manufacture: 2004 Transport dimensions: Length: 39.5 cm Width: 26.5 cm Height: 34.5 cm Weight: 25.5 kg

Condition: new, Year of construction: 2025, Centrifugal wheel system, suspended monorail type 1.15 2T Dimensions: D=1000mm, H=1500mm, payload: 500kg, with 2 centrifugal wheels, 7.5kW each, including filter system and dust collection filter. For questions regarding technical specifications, etc., please contact us in writing or by telephone. Rodpfxodrr U Sj Ahcjcf The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contacts.

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, Rcodsg Avfkopfx Ahcsf pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Condition: ready for operation (used), functionality: fully functional, Submitting a bid obligates you to collect the items on time by 31 December 2025! The offer includes: Web offset printing press with cutting unit Edelmann Graphics Webprint 48 Five (Serial No.: 6160-64, Year of manufacture: 2004) Sorting unit Edelmann Graphics HS (Serial No.: B-534, Year of manufacture: 2004) Extraction system incl. piping, frame Roll collator Rotatek Model RC2 (Serial No.: 007, Year of manufacture: 1994) Rcedpfx Asxyh Rhohcsf Note: The green unit outside is not included in the system.

Year of construction: 1955, condition: used, used manufactured by IMA type B55 built in 1955 Masch.-No. 0/650 Rcedevwf Szjpfx Ahcef pressing cylinder pneumatic 4 table 2900x1300 mm working height 750 mm max. material thickness ca. 200 mm located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen without guarantee and warranty

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H106-000-000, conveyor belt width: 800 mm, conveyor belt speed: 1,400 mm/s, total width: 1,066 mm, power: 3 kW (4.08 HP), axle spacing: 5,300 mm, construction width: 1,066 mm, Axle distance: 5,300 mm Belt width: 800 mm Construction width: 1,066 mm Side plate height: 270 mm Conveying speed: 1.4 m/s Belt quality: EP 400/3 3:1.5 mm Standard quality Profiling: steep conveyor belt, PB 550 mm / PH 17 mm Drive: drum motor, Van der Graaf brand Power: 3.0 kW Motor protection class/Efficiency class: IP 66 / ISO F Drive drum: Ø 215 mm (drum motor) Lagging: metallic surface Return drum: Ø 190 mm, crowned Bearing: maintenance-free tensioning bearing Ø50 mm Carrying rollers: Ø 63.5 mm with buffer rings Carrying roller interval: 600 mm Carrying roller bearing: maintenance-free Return rollers: 2 pieces Ø 89 mm Side guide rollers: 2 pieces Ø 50 mm, L = 120 mm Tensioning station: threaded spindle M16 Special design: transfer chute, free discharge Redjyh Aqkepfx Ahcecf

Year of construction: 2013, condition: excellent (used), Price plus VAT. The product is also available in other quantities and designs. This package includes: 7 x upright frames, each 700cm x 110cm (grey) 36 x crossbeams, each 3600mm (grey) 96 x safety pins This results in a shelving row with 6 bays, each with 3 levels of floor space = a total of 96 pallet spaces (400kg per pallet) Manufacturer: Jungheinrich Type: B Condition: used, very good condition Height: 700 cm Length: approx. 1 x 22.20 m Rjdpfsk Eb Sfox Ahcocf Shelf depth: 110 cm Bracing: bolted Crossbeam length: 3.60 m Shelf load: 1600 kg Bay load: 4981 kg Pallet spaces: 96 Accessories such as: Floor anchoring Connectors Load warning signs Impact protection Guide rails Grid decks Rear panel grilles Deep shelf supports Barrier railings and much more... Just ask us!

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Rjdjudk Amjpfx Ahcecf

Condition: used, Year of construction: 1980, second hand Make Scheer Rodpfxovwfuvo Ahcocf Type DB 5 Year of construction 1980 Machine no. 508054 Number of spindles 21 pieces Number of drilling beams 1 drilling from below pivoted manually Working width 800 mm Drilling depth 80 mm Tensioner 2 pieces Pitch 32mm Space requirement approx. LxWxH mm 1200x800x1300 Weight approx. 300 kg Total connection value 2.2 kW Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -