Used Wacker Neuson 3001 for sale (311)

Condition: excellent (used), Year of construction: 2001, Boiler Vitoplex 300 130Kw Used Year: 2001 Type: TX3 Output: 130Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Codpfxetu Txhe Ailsgw Loading possible Request more information

Condition: excellent (used), Year of construction: 2006, Vitoplex 300 105Kw Year: 2006 Type:TX3 Power: 105Kw With gas or oil burner Viewing by telephone only! Preferential sale to dealers, tradesmen or export. Cedstu Tv Ajpfx Ailjgw All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: good (used), Year of construction: 2002, overall weight: 110 kg, type of input current: three-phase, input voltage: 400 V, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation Cgedpfx Aevmhq Eeilew machine length: 1100mm width: 700mm height: 500mm Dc200Rj weight 110 kg

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Cjdpfsxbfutox Ailegw

Condition: used, axle configuration: 3 axles, first registration: 04/2008, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,660 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,110 mm, color: other, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 32400 kg, Tare weight: 6600 kg, Gross weight: 39000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2008, Customs seal, Sunroof, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: OK-29-JH Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 12 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 12 mm Weights Tare weight: 6,600 kg Payload: 32,400 kg GVW: 39,000 kg Functional Loading platform height: 125 cm Sunroof: Yes Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 12/2026 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Cgsdpsziutbjfx Ailjw Inquire directly about our European warranty package.

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Csdsx Eh Dropfx Ailegw Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 2726

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. MasterCut Compact 3001.15P/Me Approx. 3,000 x 1,500 mm Sturdy construction Up to 100 mm material thickness High-quality linear guides and backlash-free drive on both sides Digital, maintenance-free AC servos with IRC Up to 40,000 mm/min IRC 2500 (incremental encoder) • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC Cgjdpfxsycvq Ae Ailew • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: used, axle configuration: 3 axles, first registration: 04/2008, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,600 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,110 mm, color: other, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - EBS = Notes = Number of axles: 3, Payload: 29500 kg, Tare weight: 9500 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year of manufacture: 2008, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Vector1950, Refrigeration unit: Diesel/electric, Unit hours / electric: 6630, Unit hours / Diesel: 20090, ATP condition: 02,2029, Wall thickness: 60 mm, Coupling, Type of cooling: Refrigeration, Axle type: BPW, Carrier 1950 MEATRAILS = Additional information = General information Cab: Day cab License plate: OK-43-JD Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 12 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 5 mm Cgjdpfezhtqisx Ailew Weights Tare weight: 9,500 kg Payload: 29,500 kg GVWR: 39,000 kg Functional Refrigeration unit: Diesel and electric (20090 operating hours diesel; 6630 electric) Wall thickness: 60 mm Environmental Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damage: none = Company information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and models from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request through our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2004, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 679 cm³, injection pressure: 2,000 bar, injection weight: 618 g, mold height (min.): 330 mm, opening stroke: 1,150 mm, plate width: 995 mm, plate height: 1,050 mm, overall weight: 14,300 kg, Robot W 621-ß077 Hot runner control unit IMM 8 Control system MC 4 Cgodpfx Aozixbveiljw

Condition: new, Brinkmann FH417A49 + 001 pump, serial number: 0613803324-26933001, unused, 100% functional, scope of supply as shown in the photos. Cgsdpfxjzhqtns Ailsw

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Cgodpjwxdrbofx Ailjw Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Net weight with control cabinet: 121 t Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Cgedjzinanjpfx Ailjw Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical data Year of manufacture: 2007 Clamping unit Clamping force: 1300 t Max. opening stroke/mounting height: 2300 mm Cedpfx Aozgv Uujilsgw Max. distance between platens: 4000 mm Min./max. mould height: 1000 - 1700 mm Max. platen height: 1910 mm Min. mould size: 1000 - 1700 mm Clear tie bar spacing: 1500 mm Nozzle radius: R40 mm Mould weight: 29000 kg Ejector stroke: 350 mm Injection unit Screw diameter: 135 mm Stroke volume: 8588 ccm Core pulls AWS/DS: 1/1 Needle shut-off pneumatics: 1 The machine is supplied with a Kuka robot and can be inspected in operation.

Condition: used, functionality: fully functional, Nowicki MP 300 1E Crate Washing Machine This Nowicki industrial crate washing machine is designed for washing E1, E2, and E3 crates. The efficient washing system is compact, robust, and can be operated by a single person. The continuous washing process makes it ideal for medium to large-scale processors. This washing machine has a capacity of 300 crates per hour. The machine is equipped with one washing section and one rinsing section. In the main washing zone, the crates are cleaned, and contaminants are removed. The spray nozzles are supplied with water by a powerful and energy-efficient 5.5 kW pump. The main washing tank is filled via a dedicated filling connection equipped with level sensors. The discharge section is fitted with a stainless steel discharge platform (length 2250 mm). The crate washing machine is fully manufactured from stainless steel. Production capacity: 300 crates/h Conveyor speed: Continuously adjustable Voltage: 400V (3+N, 50Hz) Power: 32.5 kW Weight: 715 kg Year of manufacture: 2007 Machine dimensions (W × D × H): 5950 × 1020 × 2120 mm Cgjdpfx Aezh H Alsilsw

Condition: good (used), Year of construction: 2011, operating hours: 78,454 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 678 cm³, injection pressure: 2,007 bar, installation height: 330 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm Csdpozgt Skefx Ailsgw screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included machine without robot-system screen text german CEE-socket 16A pressure accumulator for uprated injection speed core pulling hydraulically 2x machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface for handling Schuko-socket 10A measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: like new (used), Year of construction: 2008, functionality: fully functional, • BB300-10K envelope module "right" with BSC 2.0 user interface • Feeder system with 6 feeder positions "right" • 4x rotary feeders AT25 (at positions 1–4) • 1x hybrid feeder HF3 (at position 6) • 1x free feeder position with safety guard • long chain guide • 15” panel • Keiper stacking conveyor, 1.5m • Preparation for reading at a maximum of 6 positions • Vacuum sealing section with integrated discharge station • 1x turning conveyor • 1x envelope autoloader Codpfxozh Er Eo Ailegw • D/V printing/vacuum pump with noise protection - With Müller channel – consisting of: • Module 6798 Autoloader • Module 6686 single-sheet feeder, 26,000 sheets/hour • Module 6896/6815 transfer unit with stop function • Module 6826/6822 second pocket folding unit, 2x top with stop function • Module 6786 collection pocket, standard up to 12” • Module 6730 transport module • Module 6730 transport module • Module 6955 Black Box • Preparation for camera reading

Condition: used, Year of construction: 2014, Plasma cutting machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of manufacture: 2014 Operating hours approx.: 7,024 Control system: iMSNC Working area: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access via TeamViewer 15 m hose package Without fume extraction Cgjdeypdl Iepfx Ailsw 1 x nesting software Asper Win Basic + automatic nesting on the machine control system 3726ä All-gas = enables the gas to be changed to adjust the cutting quality and cutting speed to the material.

Year of construction: 2026, condition: used, NEW, built in 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum board, cement fiber board, and planks. Examples: Doors, planks, MDF panels, cabinet fronts, gypsum board, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed andwith a set loading and unloading capacity. This allows you to easily automateyour loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical Specifications: - Manufacturer: Ka-Ma - Model: KR-1300-1 Cgedpfoy S S Htjx Ailsw - Working width: 1,300 mm - Includes belt conveyor, length 3,000 mm - Working height: 930 ± 50 mm - PLC control, operated via a touch panel, Siemens S7-1200 - Loading and unloading of parts via 2 suction plates, length 442 mm - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min. - Electric motor power: 1.5 kW- Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: 2-circuit vacuum system with 4 additional suction cups and the ability to lift the panels 15 mm on one side before vertical movement; required for all materials that can be vacuum-sealed. YouTube link:?v=WpRUnvPFqN0

Condition: used, Year of construction: 1963, Single-column hydraulic press MÜLLER ZE 250/300-12.5 1.3-U, No. 586, year of manufacture 1963, pressing force 250 t, working area 1,300 x 1,100 x 1,000 mm, retrofitted with ROMA safety roller door (year of manufacture 2012) Cjdpfeyhqqnsx Ailogw

Condition: ready for operation (used), Siemens stator for 1FK6083-6AF71 servo motor, serial number: YFM210681703001, used, in good condition, 100% functional, scope of delivery as shown in the photos. Cedpfozffi Eox Ailjgw

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 141 h, load capacity: 3,000 kg, lifting height: 3,395 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,200 mm, drive type: Elektro, Electric 4-wheel forklift Cgsdpfx Aiozfbwrslow Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Like new Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 40 - 60% Battery year of manufacture: 2024 Description: left door missing Side shifter, 3rd valve, rear work light, front work light, half cabin, heater, full free lift,

Condition: used, axle configuration: 3 axles, first registration: 11/2004, color: other, Year of construction: 2004, Empty weight: 6.600 kg Axle 1: left 10 mm right 10 mm Cjdpfx Aozgtgzjilsgw Axle 2: left 6 mm right 6 mm Axle 3 left 10 mm right 10 mm

Condition: good (used), Here we offer a PINK vacuum drying oven. PINK vacuum drying oven Space requirements for operation and maintenance: Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions of the vacuum drying oven: External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber 79 liters Operating temperature min. 20 °C, max. 150 °C Electrical connection: Supply voltage 3 x 400 V; 50 Hz, N / PE, 8.5 kVA Heating power 6 kW Cooling power 6 kW at 15 °C medium temperature and 15 °C cooling water temperature Heating: Floor, ceiling, side walls and door, double-walled; heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters, depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Csdpfx Ajzdi Ivoiljgw Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: used Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 1986, grinding wheel diameter 300 mm Cedpfx Aet Hwzvjilegw table length 0 mm table width mm total power requirement 11 kW weight of the machine ca. t dimensions of the machine ca. m Cut-Off Machine for Hard Materials, Coolant, Hand Lever11 kW

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Cedpfjrixi Nox Ailsgw For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics