Used Voran Bottle Brushing Machine Ps400 for sale (65,193)

Condition: good (used), Year of construction: 1986, machine/vehicle number: B III 33-7086, Offer 25440 Technical data: Hodpfezrv Dajx Aitsnu - Brush diameter: 250 mm - Brush width: 60 mm - Disc speed: 1500 / 3000 rpm - Drive: 400 V / 1.0 / 1.4 kW - Working height: 900 mm - Space requirement: approx. W 650 x H 1150 x D 450 mm - Weight: approx. 100 kg

Condition: used, SECOND-HAND BRUSHING MACHINE COMEC Hodpfx Aijwrq Ehjtenu

Year of construction: 2018, condition: used, A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet. Additional title: single-ended machine for cleaning glass bottles Hnjdpszizyzofx Aitsu Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs. Processing time: 14,14 min Heating / Cooling: 1.352.712 kJ/h Water: 7,92 m3/h Formats: 0,5 l NRW bottles Material: housing from stainless steel Position: in a cabinet on legs with an enlarged surface area Base construction: sinle-ended machine Features: pre-soaking and lye baths; spray nozzles; bottle conveyor with drives; pumps; top surface serving as a work platform with guardrails; housing; control cabinet; touchscreen display serving as an HMI panel

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Hnjdpfotr Aviox Aitsu Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: ready for operation (used), Suitable for: - Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing - Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes - Cosmetics: shampoos, creams, shower gels, oils, lotions Piston filler with 4 volumetric filling heads, with upward dispensing Hedpfx Aeyxpqcsitjnu Manual cap placement by operator Automatic capping unit Incl. 80-liter heated tank with mixer Up to 2,000 bottles per hour

Condition: new, Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Hnodpfxeyqx Dbo Aiteu Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11,57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania)

Condition: used, Deburring machine with brushes, tube deburring machine, BAUER Type BE 1 Machine No. Year of manufacture 2005 Hnedpfx Ajhrkrwjitsu Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Power supply 380 volts, 50 Hz - Material support - New deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg In good condition

Condition: new, Steel aging brush, gold color, 600 Hnodpfx Aiezvmt Hjtju Outer diameter: 210 mm Inner diameter: 40 mm Brush width: 600 mm Available grit sizes: 36-150 We also offer brushes with a width of 400 mm.

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Hnedpfx Ajzwt Rbeitju

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 600 mm, brushing unit diameter: 150 mm, height adjustment type: electric, working height: 300 mm, power: 5.5 kW (7.48 HP), Brushing machine Houfek Twingo 600 BB 400V/50Hz, 2x5.5 HP (4 kW), width 600 mm Basic equipment: 1.1 Motor 4 kW (5.5 HP) per B-unit 1.2 Tool turning diameter 120-300 mm, working length 600 mm 1.3 Independent height adjustment of the working units 0 - 300 mm 1.4 Fixed table h=900 mm 1.5 Expansion shaft D=40 mm 1.6 Two rubberized pressure rollers on the work unit, height-adjustable 1.7 Electric stroke of the work unit(s) + scale with unit height indicator 1.8 Two feed belt speeds 4.5/9 m/min - replaced by P81 10 1.9 Brush protection cover 1.10 Suction nozzle diameter for unit B and Q D=120 mm Hnedpeu Rnb Njfx Aitsu 1.11 Machine is not equipped with the tool for 2nd unit 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Additional equipment installed in this machine: - 2x motor 5.5 kW 7.5 HP - Automatic feed belt centering - Frequency converter for feed belt speed 3 - 15 m/min - Oscillation for one brush unit with the possibility of switching off - 2x return of the main motor (1 unit) (synchronous and counter-rotation possible on both units)

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC. Hedpfxsz R Rbdj Aitsnu

Condition: excellent (used), functionality: fully functional, Maximum working height: 20 cm Maximum working width: 25 cm Hnodpfxez Dv Ugo Aitsu Electrically driven rollers Smoothly adjustable roller speed

Condition: ready for operation (used), functionality: fully functional, Filling heads: 8 volumetric filling heads Filling volume: 5 ml - 5,000 ml Capacity: 30 - 100 bottles per minute Suitable for pharmaceutical, chemical, and food products. Hodpfx Aiozfpq Totjnu

Condition: new, Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Hedpfxjm Dr Rgs Aitsnu Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 250506-mxa-03, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 600 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, input voltage: 380 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,400 kg, total length: 4 mm, total width: 3 mm, total height: 2 mm, warranty duration: 3 months, air pressure: 16 bar, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, Fiber laser metal cutting machine — 1500 W MAX Photonics (Senke SKL-1530F) Brand new, unused — still sealed in original factory export packaging (0 operating hours). Immediately available. High-precision, long-term stable and affordable fiber laser cutting for professional sheet-metal work. Ideal for metal fabrication shops and repair workshops. Delivered as a complete, ready-to-run package. Complete package — key features: ● MAX Photonics fiber laser source, 1500 W ● DELTA servo motors & drives (1500 W X/Y, 400 W Z) ● Raytools control system with RayTools BM110 cutting head ● Large 1500 x 3000 mm working area (fits a full standard sheet) ● Open-frame design — easy access and loading of oversized plates ● Reinforced, stress-relieved welded steel bed for lasting dimensional stability ● Taiwan YYC gear rack + HIWIN 25 square rails + TBI ball screw (Z) ● Positioning speed up to 150 m/min · cutting speed up to 7 m/min (material/thickness dependent) ● S&A industrial water chiller ● France Schneider electrics · SMC pneumatics · France Motoreducer · automatic central lubrication ● Included air compressor (15 kW, 1.6 MPa, 340 L tank) — enables low-cost cutting with compressed air, so bottled nitrogen/oxygen is reserved only for jobs that require it. Lower running costs and greater gas autonomy from day one. ● Included 30 kVA voltage stabiliser — stable power supply, protects the electronics ● Included spare consumables: 100 protective lenses + 100 copper nozzles — full starter set of wear parts Hnjdpfx Asztn N Djitsu Materials: carbon steel, stainless steel, aluminium, brass and other sheet metals — sheet-metal processing, auto parts, metal crafts, chassis/cabinets, kitchenware and similar industries. Sales exclusively to commercial businesses. Machine located in Jõhvi, Estonia — viewing by appointment; INCOTERMS: EXW

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, adjustable separately Brush deflection height: 25 mm with pneumatic damping 1st brush: Metal brush, diameter 220 mm Hnedpfei Ezrzex Aitsu 2nd brush: Tynex brush, grit 80, diameter 220 mm Right/left rotation: for both brushes Height adjustment: handwheel Height indicator: mechanical counter Feed rate: 4 - 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, adjustable separately 1st brush: Scotch Brite Medium / Diameter 220mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220mm, variable speed drive Height adjustment: Handwheel Height indicator: mechanical counter Feed rate: 4 - 12 m/min Motor power, brushes: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Hnodpfxsi Hpk Us Aitou Motor power, feed: 0.37 kW Machine length: 1400mm Machine width: 900mm Weight: 500kg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 177, SECOND-HAND BRUSHING MACHINE CAMAM MOD. CAM - CE RULES - S/N 177 - Year 2000 Hsdpfox Rn Tyox Aitonu

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, adjustable separately 1. Brush: Metal brush, diameter 220 mm 2. Brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power for brushes: 2 x 4 kW Motor power for feed: 0.37 kW Machine length: 1400 mm Hedpfod Ry Dtsx Aitonu Machine width: 1200 mm Weight: 650 kg

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, adjustable separately 1. Brush: Metal brush, diameter 220 mm 2. Brush: Tynex brush, grit 80, diameter 220 mm Right/left rotation: for both brushes Hjdpfod Ry Drex Aitsnu Height adjustment: handwheel Height indicator: mechanical counter Feed rate: 4 - 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: used, machine/vehicle number: 008463, Max. working width: 1700 mm Max. working thickness: 60 mm Hodpfx Aez Eyxfeitenu

Condition: used, Year of construction: 2003, Labelling machine Krones Prontomatic Type 12-6/6-4, year of manufacture 1994 - reconditioned. Capacity: 13500 bph Swing-top label Voltage: 400 V Frequency: 50 Hz Length: 2450 mm Width: 2000 mm Height: 2500 mm Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l Machine partitioning: 180mm Hnodpfx Ajxbpggoitsu Running direction: Right - left Operation / Control: Simatic S7-300

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, Hedpfxez Srv De Aitenu +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: new, Year of construction: 2024, Cleaning method The Roba Profi Clean machine line guarantees as a through feed solution high productivity. As a stand-alone solution for large quantities or directly behind the turnover/backside trimming equipment of a thermos foiling line. The only solution that is able to feed a complete batch of doors coming out of a membrane press. During this operation the laminated fronts get cleaned from glue residues and simultaneously all four edges are slightly rounded without the risk of delamination. Therefore the parts do not require any further processing steps and can be forwarded directly to the packaging. This is ensured by two or four clockwise and counterclockwise working cleaning drums, which are equipped with special cotton brushes. Further on this machine is also able to show its high capability in the cleaning of all other laminated furniture parts. Roba Profi Clean Hjdpfxsff Htpj Aitsnu Operation areas • Backside cleaning of thermo-foiled doors • Cleaning of laminated furniture panels The Roba Profi Clean as through feed solution guarantees high productivity with best cleaning results. Advantages of the Roba Profi Clean principle: • Optimized cleaning from dust and glue residues • Optimal rounding of sharp edges Roba Profi Clean equipped with two double brush cleaning Aggregates Double brush aggregate work clock- and counter- clockwise, equipped with special cotton brushes for secure cleaning. The Roba Profi Clean is suitable for cleaning of all kind of laminated furniture parts

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Hedpfxsmk I Dwo Aitjnu