Used Vital Dms 63 for sale (4,904)

Condition: excellent (used), Year of construction: 2001, Eckold tool ECKOLD - HLA60 MACH-ID 9687 Make: ECKOLD Type: HLA60 Year: 2001 Hnedpsz A Trgsfx Ap Het Beak-Shaped shrinking dies for U-profiles They are specifically made to eliminate marring the material while shrinkin These jaws fit the Eckold KF170PD Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, spindle speed (max.): 3,750 rpm, bar diameter (max.): 26 mm, overall weight: 6,800 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For further Schütte multi-spindle machines for sale from the same location, see below! TECHNICAL DETAILS Bar diameter round: 26 mm Bar diameter square: 19 mm Bar diameter hexagonal: 22 mm Bar diameter octagonal: 24 mm Spindle circle diameter: 270 mm Hodpjz Agy Hjfx Ap Hsnt Standard bar feed: 125 mm Special bar feed: 290 mm Longitudinal slide travel, standard total: 80 mm Longitudinal slide travel, standard working length: 63 mm Longitudinal slide travel, special total: 125 mm Longitudinal slide travel, special working length: 98 mm Cross slide travel, upper slide total: 40 mm Cross slide travel, upper slide working length: 25 mm Cross slide travel, middle slide total: 40 mm Cross slide travel, middle slide working length: 25 mm Cross slide travel, lower slide total: 50 mm Cross slide travel, lower slide working length: 31 mm Number of spindle speeds: 49 Spindle speed range I: 530–3,750 rpm Spindle speed range II: 236–1,700 rpm Workpiece revolutions per working cycle, standard: 60–425 Workpiece revolutions per working cycle, short: 33.5–236 Workpiece revolutions per working cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Rated drive motor power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,500 x 1,450 mm Length with bar guide: 6,470 mm Machine weight: 6,800 kg Space requirement for packed machine: 14 m³

Condition: new, I sell the combined surface planing - thicknessing machine VITAL FS41N. New machine. Max. working width 410mm Spindle 3-knives 410x100mm Main spindle + Feeding motor 4,0 KW. Total weight 420kg. Surface planer: Max. construction cutting take-out 5mm Table dimensions 1800 x 410 mm / 900 mm input + 900 mm output Aluminium fence dimensions 1100 x 155 mm / adjustable 0–45°. Thicknesser: Max. construction cutting take-out 4mm Max. working thickness 4-230mm Feeding speed 8 m/min. 1+1 top pressure rollers with anti kickback device. 2 bottom rollers in table for better feeding of wet or heavy parts Working thickness adjustment manual . Hnsdpfx Apjq Dzk He Hjt Dust extraction hose diameter 120mm. European product, made in EU, with CE certificate and instruction manuals. New machine with 12 months warranty. Machine in stock in Kežmarok, Slovakia, possibility to test. Possible to buy the additional mortiser with adjustable table. Price 700 Euro. On stock.

Condition: used, mileage: 838,952 km, power: 324 kW (440.52 HP), first registration: 05/2007, fuel type: diesel, number of seats: 63, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro4, color: black, Year of construction: 2007, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater,

Condition: repair required (used), Year of construction: 2015, machine/vehicle number: 1464, Offer 26166 - Screw compressor with defective drive motor Manufacturer: KAESER, Type: SK 22 Machine No.: 1464, Year of manufacture: 2015 - SIGMA Control - Operating hours approx. 15,933 h - Load hours approx. 7,654 h - Operating pressure 11 bar - Delivery rate 1.67 m³/min - Drive 400 V / 11 kW - Space requirement approx. W 780 x H 1030 x D 850 mm - Weight approx. 300 kg - Compressed air tank Manufacturer: OKS, Type: 500L Machine No.: 462811, Year of manufacture: 1998 - Tank volume 500 L - Compressed air dryer Manufacturer: JÄGER, Type: ERD 150 Machine No.: 1268, Year of manufacture: 2011 - Refrigerant R134 A - Cooling air volume 150 m³/h Hnodpfx Apozg Uh To Het - Oil-water separator

Condition: used, mileage: 638,810 km, first registration: 08/2018, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,510 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2018, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, soot filter, spoiler, traction control, = Additional options and equipment = - Aluminum fuel tank - Heated exterior mirrors - Power brake booster - Combination lights - Roof spoiler - Remote central locking - High beam - Speed limiter - Ceiling lights - Refrigerator / cooling drawer - Beacons - Air suspension - Air horn - MX engine brake - Particulate filter Hodpfx Apjz Datms Hsnt - Radio/CD player - Sleeper cab - Sun visor - Standalone air conditioning - Auxiliary heater - Toolbox - Power take-off (PTO) - Power take-off (PTO) - Equipment transmission = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Gearbox: TraXon, automatic Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Suspension: leaf spring Rear axle 1: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Suspension: air suspension Rear axle 2: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Suspension: air suspension Weights Unladen weight: 8,818 kg Payload: 18,182 kg Gross vehicle weight: 27,000 kg Functional Body manufacturer: ZF Identification Registration number: 57-BLB-1

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Hodpfx Apozz Sd Us Hjnt Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: used, Year of construction: 1958, For sale: an industrial filling and dispensing machine from Gebrüder Höller Maschinenfabrik, Type MB, designed for dispensing and packaging granular and pelletized products. Key information: Manufacturer: Gebrüder Höller Maschinenfabrik Model/Type: MB Application: granular/pelletized products The machine features a robust, mechanical industrial design and is equipped with a large hopper with a mixing system, as well as an extensive dispensing and packaging mechanism. Equipment visible on the machine: large hopper/feed bin, mixer in the hopper, mechanical dispensing system, product feeding system, mechanical packaging system, electric main drive, gears and mechanical drive transmission system, control panel, Hnjdpfszumk Asx Ap Hot adjustable working elements, heavy-duty, stable industrial construction. After appropriate adjustment and adaptation to the specific product and packaging type, the machine can be used to package various types of bulk, granular, and pelletized products. Condition: Used machine, in the condition shown in the current photos. Visible signs of use, scratches on the paint coating, and localized corrosion marks typical of long-term operation of an industrial machine. The machine is complete as shown in the photographs. It is currently placed on a pallet and prepared for transport. Options: personal inspection of the machine, obtaining additional information, arranging loading and collection terms. Sales conditions: Selling price: 15,000 EUR Machine available immediately. We invite companies interested in purchasing an industrial filling and dispensing machine to contact us.

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors Hnedpfx Aoyhzhhep Hot - Trolleys - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, RÜHLE GFR 450 | Guillotine for frozen meat blocks / guillotine slicer Manufacturer: Rühle GmbH Model / Type: GFR 450 Serial number: 60010525 Year of manufacture: 2016 Hedpfx Apjzxudfo Hjnt Power supply: 400 V / 50/60 Hz Power: 7.2 kW Rated current: 12.3 A Dimensions: 2270 x 710 x 1350 mm Estimated weight: approx. 400 kg Maximum block / portion size: 400 x 200 mm Cutting temperature of raw material: Up to -18 °C The RÜHLE GFR 450 is a professional, industrial guillotine for frozen meat, designed for the initial shredding and cutting of frozen meat blocks, fat blocks, cheese blocks, and other food raw materials without the need for prior thawing. The device efficiently cuts chilled and deep-frozen raw materials at temperatures as low as -18 °C, which helps maintain a continuous cooling chain, prevents leakage of cellular juice, and reduces the loss of raw material mass. The compact and extremely robust design of the GFR 450 model has been designed for continuous operation in the demanding environment of the food processing industry. The use of a powerful 7.2 kW drive, combined with a durable guillotine knife assembly, allows for quick and even shredding of blocks up to 400 x 200 mm into smaller portions, perfectly prepared for further processing in grinders, cutters, or mixers. The device is ideal for butcher shops, meat processing plants, fish processing plants, catering facilities, and the industrial production of ready-made meals.

Condition: new, I sell the surface planer VITAL DMA 53 L with spiral head. New machine. Max. working width 530mm Max. construction cutting depth 8mm Spindle spiral 530x125mm / knife dimension 15x15x2,5mm Hnjdpfx Aeixlrqsp Hot Working table dimension 2900x540mm / 1650mm input + 1250mm output Fence dimensions 1300x167mm / adjustable 0-45°. Stroke for thickness adjustment manual. Suction throat diameter 160mm. Main spindle motor 5,5 KW. Total weight 800kg. European product, made in EU, with CE certificate and instruction manuals. Machine in stock in Kežmarok, Slovakia, possibility to test.

Condition: used, Year of construction: 1963, operating hours: 10,752 h, For inquiries regarding the vehicle, please contact Mr. Mihm (phone number available upon request). Frisch KG Grader Type 50D 10,752 operating hours, 52,683 km, year of manufacture 1963, air-cooled diesel engine, 3 cylinders, permissible total weight: 6,600 kg Used condition, commensurate with age. Hjdpfozq N Iiox Ap Hent Mr. Mihm (phone number available upon request) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change!!! = Further information = Please contact Tobias Ebert for further information.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Hedoztpixspfx Ap Hent Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Dual pallet changer Spindle cooling Oil cleaner Chip conveyor Cooljet Systems oil cooler Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm Hnjdpezrprdjfx Ap Hjt stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2004, machine/vehicle number: AL/007522, functionality: fully functional, operating hours: 25,000 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,870 mm, travel distance Y-axis: 1,465 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 3,870 mm, workpiece width (max.): 1,465 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 100 kg, number of axes: 3, number of slots in tool magazine: 10, actuation type: electric, total height: 2,700 mm, total length: 5,800 mm, total width: 3,500 mm, overall weight: 3,800 kg, table length: 3,870 mm, table width: 1,465 mm, year of last overhaul: 2023, Equipment: documentation/manual, For sale: a fully functional CNC machining center, Morbidelli Author, manufactured in 2004. The machine features a 7.5 kW main spindle with HSK63F tool holder, a tool magazine with 10 positions, a drilling head with 24 positions, an additional mortising head, and a powerful vacuum pump with a capacity of 190 m³/min. It is in very good technical condition, regularly maintained, and still in operation. A significant advantage for the buyer is the opportunity to personally inspect and test the machine in real-time during actual production. Thanks to this extensive configuration of the drilling head and mortising unit, the machine is ideal for both custom and series production of wood products, furniture, frames, or doors. We will also include a spare spindle, which requires a position sensor replacement. Hnsdjzzmhnspfx Ap Hjt

Condition: like new (used), Year of construction: 2026, functionality: fully functional, We offer you: CNC turning and milling center with robotic automation Manufacturer: DMG MORI Type: CLX 450 TC Year of construction: 2026 Control system: Celos X with Siemens Sinumerik One Technical data: Max. turning diameter: 400 mm Turning length: 1100 mm Bar capacity: max. 65 mm Travel paths: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool interface: HSK-T 63 Tool changer: 60 positions Max. torque: 73/90 Nm Internal clamping device: Ø 67 mm Operating hours: approx. 1,130 h Spindle hours: approx. 280 h Technical features & accessories: - Absolute, direct linear scales in the X and Y axes - Double-circuit filter - Counter spindle ISM 65, A2-8, C-axis and hydraulic spindle brake - Hinged belt chip conveyor, incl. coolant tank - Chuck flushing device on the outside for the main and counter spindle - Coolant supply through the counter spindle - Coolant spray gun - Screen cleaning for the safety shield - Electronic handwheel (if available) - Alternating speed - Signal light, 4-color - Automatic work area door, electric - Electrical interface Robo2Go - Workpiece measuring probe, manufacturer Renishaw RMP40 (if available) - Tool measuring device, manufacturer Renishaw RP1 (if available) - Function for drill breakage detection for Renishaw RP1 - Linear scale for Z1-axis - Differential pressure monitoring 2.0 on the main and counter spindle - Tailstock function for the counter spindle, incl. foot switch - Coolant system 8/40 bar, consisting of: - Coolant tank 600 l - Pump pressure variable 8 – 40 bar - Belt filter system - Lifting pump with level monitoring - Mechanical oil mist separator - Protection Package - Technology cycle with dialogue-guided programming - Technology cycle for parting off the workpiece - 2x 3-jaw chuck, manufacturer Schunk ROTA THW3 265-81 - Loading and unloading system Robo2Go, consisting of: - Module 35 kg - Drawer storage incl. additional drawer - Accessories on request Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and specifications, as well as prior sale, are reserved! Hodpoz A Ay Tjfx Ap Hjnt

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Hsdpfxjzi R R Ne Ap Hjnt Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: repair required (used), Mill for recycling waste and plastics. Manufacturer: ALPINE AUGSBURG Type: RO 63/50 Hjdsw E Nw Nepfx Ap Hent Motor power: 50 kW Feed hopper dimensions: 400 x 500 mm Included: 16 interchangeable screens with mesh sizes from 1 to 50 mm Machine dimensions: 3000 x 2000 mm Height with conveyor: 4200 mm Weight: 7000 kg Technical condition: used machine, no electrical installation.

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Hnodpfozrupzjx Ap Het Main switch Synchronous welding control 15036

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,870 h, screw conveyor diameter: 63 mm, Krauss Maffei KMD-63K extruder in very good condition for sale. The machine comes from a technical center and has only 1,870 original operating hours! All functions are in working order. An inspection with a test run without material is possible at any time. Technical data: - Year of manufacture: 2015 - Operating hours: 1,870 - C5 control system - Twin-screw, single-conical design - Closed screw cooling system - Standard profile screw - Motor power: 38.3 kW - Weight: 2,700 kg Delivery includes all documents, hoppers, and adapters. Hnodpfx Apoz Ag Tgo Hot Loading with a forklift. Delivery is possible by arrangement. Export documents and sea packaging are also available. Please do not hesitate to contact us with any questions.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60227, Offer 26293 Hydraulic Horizontal – Two-Column Miter Bandsaw Machine Technical data: - Automatic operation for the cutting process, hydraulic lifting and lowering of the saw frame - Manual miter adjustment to the left and right with clamping - Saw band dimensions 4400 x 34 x 1.1 mm - Cutting speed, continuously adjustable 15 - 150 m/min - Cutting pressure regulation, continuously adjustable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range: - at 90°: round 335 mm - at 90°: square/rectangular 500 x 335 mm - at 45°: round 330 mm - at 45°: square 320 x 335 mm - at 30°: square 170 x 335 mm - Miter adjustment with digital angle display Hodszz Rbljpfx Ap Hsnt - Outfeed roller conveyor with dimension stop 6000 mm - Infeed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 1500 x H 1850 x D 2100 mm - Weight approx. 1500 kg

Condition: used, Year of construction: 1990, used, in good condition with Tersa cutterblock and infinitely variable feed Make: SCM Model: S63B Year of manufacture: 1990 Machine no.: 47015 GS-certified Motor: 5.5 kW Planing width approx. 630 mm Planing height approx. 3–240 mm Segment pressure beam 2 steel feed rollers Feed rate: 18 m/min Number of knives: 4 pcs Hodpfx Asyztzqsp Hsnt Knife system: Tersa reversible knives Digital height display Electric fine adjustment of height Extraction port D 160 mm Space requirement approx. 1250 x 800 x 1100 mm Weight approx. 750 kg Location: 97447 Gerolzhofen, freely loaded, unpacked Delivery in current inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 1988, Šmeral Trnava Metal Lepa 63 PA Category: Metal Hodpfszw D Dfox Ap Hent Brand: Šmeral Trnava Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes 630 kN --- ---

Condition: defective spare-parts repository (used), Year of construction: 1974, machine/vehicle number: 121645, functionality: not functional, pressing force: 63 t, table width: 650 mm, table height: 910 mm, overall weight: 4,000 kg, space requirement height: 2,800 mm, space requirement length: 1,200 mm, space requirement width: 1,900 mm, stroke adjustment: 63 mm, The eccentric press has a clutch defect and is currently non-operational. Hnjdpjx D Tngefx Ap Hot Without the column stand mounted in the pictures.

Condition: used, Year of construction: 2022, For sale: a CNC bending press, model FICOM PBH-63T/3200, manufactured in 2022, with minimal usage. The machine was purchased new and has seen very little use. It is currently fully operational and connected to power, allowing for inspection, testing, and trial bends. The machine is available on-site and ready for immediate pickup. We have the technical documentation for the machine. Key information: Manufacturer: FICOM Model: PBH-63T/3200 Year of manufacture: 2022 Bending force: 63 T Working length: 3200 mm Controller: ESTUN E21 Hnjdpoz Aiqzsfx Ap Hst Controlled axes: X and R axes with NC control Equipment and features: ESTUN E21 controller Automatically controlled X and R axes Quick release system for upper tools Linetech Laser Safe laser operator protection system 85° bending punch and die 30° bending punch and die Technical documentation for the machine Two different sets of bending tools allow the machine to be immediately adapted to different bending tasks. If you have any further questions, we will be happy to answer them.