Used Viessmann Vitorond 200-160Kw 0,95 Heating & Blower for sale (28,050)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar Nedpfx Aowc Rk Esfajla TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: like new (used), As new Tote Bins Capacity 200 Ltr Mobile on 4 nylon wheels Some complete with lids Nsdpfx Aou Ti Slefajla Qty 10 available

Condition: like new (used), 200 lfm Fachbodenregal Schäfer R3000 Njdpfx Afedz Agdjasla

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 6,000 rpm, section length (max.): 3,450 mm, TECHNICAL DETAILS Maximum cutting height: 155 mm Maximum cutting height at 45°: 105 mm Maximum cutting width: 1,250 mm Maximum cutting length: 3,450 mm Maximum saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scorer: Auto-EPS with motorized positioning for lateral and height adjustment Cross carriage: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Motorized control, with positioning control to 0.1 mm MACHINE DETAILS Nedpoyx Et Hefx Afaela Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electrical axis control Sliding table completely readjusted Ruler carrier replaced with new system, featuring 3 flip stops Stainless steel scale for angle adjustment renewed Cross carriage checked Longitudinal fence with 90° locking completely replaced Machine electrically inspected Machine completely readjusted, checked, and lubricated Note: The specified data are partially taken from manufacturer's brochures or documents and may differ from the actual values.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, pressing force: 32 t, working height: 200 mm, controller model: Siemens 840D, working length: 2,150 mm, TECHNICAL DETAILS Bending length: 2,150 mm Maximum bending height: 200 mm Minimum length/width between bends: 160–350 mm Pressing force: 32 t Nodpfx Aey D Ihwsfajla MACHINE DETAILS Control: Siemens 840D Dimensions & Weight Dimensions (L x W x H): 8,500 x 7,000 x 2,850 mm Weight: 30,000 kg EQUIPMENT Automatic tool changer Manipulator Reverse bending cycle Sheet centering system Additional top tools Loading and unloading system

Condition: like new (used), functionality: fully functional, machine/vehicle number: Geo Knight Maxi - Press, Year of construction: 2017, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and Nledpfx Afjv Dm Udjaoa higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: Nedpfx Afoq Nia Ioasla - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Nedpew S Dmdsfx Afaola Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / All-Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 25 mm Shot weight: 39 g Nodpfsy Dp E Rox Afasla Injection pressure: 1580 bar Dosage volume: 44 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle lever Control system: NC5 - touchscreen Additional equipment: All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface 4x air valve Hot runner control Hardened injection unit – bimetallic Central lubrication Screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Nedpey Dqiqjfx Afaola Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Engel e-victory 200/80 with Engel Viper 12 Robot / Electric Machine / Operating hours: approx. h in automatic mode Year of manufacture: 2012 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 71 g Injection pressure: 2400 bar Dosage volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: electric Clamping unit: hydraulic Control system: CC 200 – touchscreen Additional equipment: Production line with Engel Viper 12 Machine is in very good technical condition Electric machine: energy-efficient and very quiet Operating hours: approx. in automatic mode Air valve x 4 Hydraulic core pull x 1 Controller with 12 hot runner zones Injection unit is wear-resistant and corrosion-resistant Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Kistler sensor – mold pressure regulation Parallel movements Engel Viper 12 Robot Year of manufacture: 2012 5-axis robot: 3 axes driven by servomotors (electric): X, Y, Z; B-axis pneumatic and C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Nsdpfx Afjy Dp Irsaola Purchase of robot and conveyor at extra charge Dimensions: Weight: 5500 kg Length/Width/Height: 4.40x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Nlodpfx Asv Sbmqsfaoa Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light Nlodpswp Ebljfx Afaja saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Nlodpfsyvgf Dox Afaoa Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Nljdpfjycckcsx Afaja Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: simplex, construction height: 1,335 mm, fork length: 1,200 mm, empty load weight: 1,350 kg, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Nedpfx Ajqynq Rofaola Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate,

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE morbidelli x200 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with a comprehensive range of drilling and milling tools to meet any requirements in the processing of wood and similar materials. Highlights: • Powerful, featuring drilling spindles with 8,000 RPM and advanced technology – the most robust spindle available on the market, offering over 1,000 hours of maintenance-free operation • Better and more extensively equipped, with a multifunction table that allows for various configuration options, ensuring optimal setup according to your needs • Easier and more intuitive programming thanks to the integrated Cad-Cam module 'MAESTRO CNC' • User-friendly operation: the work table is accessible at all times, and both control cabinet and vacuum pump are integrated. In the PRO SPACE configuration, there are no safety barriers required Construction: The supporting structure consists of an exceptionally robust monolithic steel base, heavily ribbed and very rigid; its particularly wide support surface is specifically designed to ensure the machine’s stability, providing sustained precision regardless of working conditions, without the need for floor anchoring. The base provides a large, solid foundation for the moveable gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of withstanding the highest demands, resulting in superior performance quality and greater accuracy. The movable portal is formed from a solid single piece, anchored to both sides of the base and running on high-quality prismatic guides with recirculating ball carriages. Dual drive motors on the X-axis ensure top performance even under heavy-duty conditions. Movement along the lower movable unit (X-axis) and along the gantry (Y-axis) is achieved via helical rack and pinion transmission. This enables higher tooth-by-tooth thrust, greater acceleration, and increased velocity along the X and Y axes. The specially designed helical gearing ensures lower wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, providing perfect balance under dynamic load as well as allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, guaranteeing top-quality finishing since potential vibrations are fully eliminated. Movement along the X-Y-Z axes is accomplished with brushless motors powered by digital inverters, offering: Nsdpjywvldsfx Afasla - Reduced processing times due to improved acceleration - Enhanced positioning accuracy with high-resolution encoders - No need for setup referencing upon startup thanks to absolute encoders - Practically no general maintenance required due to the brushless system, as there are no brushes Axis movement and general machine operating elements are managed by an industrial NS module with digital data transmission.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Njdpey E Ilxofx Afajla Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Number of shelves: 3 units Maximum permissible load: 90 kg, evenly distributed across 3 shelves Maximum load per shelf: 30 kg Test chamber material: Stainless steel Wst.-Nr. 1.4301

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Nsdjwtmi Espfx Afaela Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: new, neu ca. 4 Monate ab Auftragse Italien 55200 € 1043.28 € 200 to 500 mm 1000x600 mm 640 mm 21 mm/s 2 mm/s 5.5 kW 1800 mm 1300 mm 2500 mm 6400 kg Njdpjynnfiefx Afaela 2 speeds adjustable max. pressure manomete

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Connection: Input 600x1220 mm -Connection: Output 680x680 mm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm Njdog N Dhwspfx Afasla -Weight: 584 kg

Condition: used, Year of construction: 2018, operating hours: 7,610 h, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, Weight: 2.500 kg Price: On request - Details: - └ Description: Machine currently still has a malfunction to be fixed - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 7610 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit Nlsdpsy Ewv Tjfx Afaoa - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 1,500 kg, total width: 1,400 mm, total length: 1,300 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Lifting Dough Mixer Diosna mobile mixer Model: D 200 a Dough machine with flour dust cover 2 bowl trolleys Robust engineering 2 speeds Connection: 400V, 32A-CEE plug Refurbished used machine Nljdpfsuyrzrjx Afaea Options: Leasing & rental service Floor anchoring Delivery service Maintenance contract E-Box Service package Commissioning & instruction More lifting dough mixers in stock!

Condition: used, axle configuration: 3 axles, first registration: 02/2015, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2015, Equipment: ABS, = Additional options and equipment = - EBS = Remarks = Number of axles: 3, Kerb weight: 8,610 kg, Gross weight: 41,000 kg, Kingpin size: 2 inch, Suspension type: air suspension, ABS, EBS, Body build year: 2015, Sidewall material: insulated, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: SLXe 200, Refrigeration unit: diesel, Unit hours / diesel: 11,774, Wall thickness: 45 mm, Cooling type: Cooling and freezing, Axle type: BPW = Further information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 8 mm; Tyre tread right: 8 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 7 mm Axle 3: Tyre tread left: 6 mm; Tyre tread right: 5 mm Weights Unladen weight: 8,610 kg Payload: 32,390 kg Gross vehicle weight: 41,000 kg Functional Refrigeration unit: Diesel (11,774 operating hours) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Visual condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range covers all European makes, model years and price categories. Why buy from Kleyn Trucks? Simple! Nljdpjw Srxnofx Afaja • Large, fast-changing inventory • Recognizable quality • Good prices • Professional service • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The safety of “recognizable quality” • And much more… Please visit our website for special offers and our complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an enquiry through our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Nsdpfx Aeyagidofaola X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.