Used Vem Zg1 Bmre71K4 for sale (449)

Condition: used, Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 32,880 mm Number of bays / row of shelves: 09 pcs. 2,880 mm each Dodpetr Unfofx Ailocn Number of levels plus floor level: 03 pcs. The scope of delivery includes 12x pallet rack uprights, used Material color: green Upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces and load distribution plate Total length: approx. 930 mm Internal width: approx. 102 mm The uprights are pre-assembled ( welded framework ) 3,650 mm high 870 mm deep 66x pallet rack cross beam, used Material color: green INP profile: 80 x 42 mm clear width: 2,880 mm max. load per pair of beams 1,600 kg with evenly distributed load 132x locking pin, used Version: completely galvanized For securing the longitudinal beams against unintentional lifting out 48x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 24x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven ground 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Currently available from stock: approx. 05 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: ready for operation (used), Elau MC-4 / 11 / 03 / 400 PacDrive MC-4 SN:897473.0060, the plastic front is slightly damaged see photo, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos Djdpfx Aiep Hrzpoljcn

Year of construction: 1991, condition: excellent (used), functionality: fully functional, overall weight: 520 kg, Pump was operated on a test bench and has only run for very few operating hours. Flow rate: 400 m³/h ( 111 liters / second ) Delivery head / delivery pressure: 19 meters / 1.9 bar Pump speed: 1450 1/min NPSH required: 3.83 m Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm) Shaft seal: single mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: roller bearing Lubrication type: Grease Materials of construction Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: Cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Nominal size of suction nozzle: DN 200 Discharge connection Nominal diameter: DN 150 Nominal pressure suction PN 16 Nominal pressure pressure PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 1/min Frequency: 50 Hz Rated voltage: 380 / 660 V Djdpfx Aorfdtteilscn Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Cosphi: 0.82 Dimensions: Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, Dsdpfx Aeranngoiljcn -Manufacturer: Orsta, Hydraulic unit -Motor: VEM 7.5 kW / 1430 rpm -Individual components: Hydac Hawe Hoerbiger see photos -Dimensions: 860/320/H420 mm -Weight: 97 kg

Year of construction: 2001, condition: good (used), 2 units of axially split spiral casing pumps with motor and baseplate. Last application as a turbine. !!! Performance curves as a pump and as a turbine are included as images !!! Manufacturer: KSB Dcedsd Nqi Repfx Ailon Type: Omega 350-360 A Flow rate: 1728 m³/h Head: 32 m Speed: 1450 rpm Year of manufacture: 2001 In turbine operation: Motor: VEM G21R 280 S4 Power: 75 kW at approximately 20 meters head and 1600 m³/h Voltage: 400 V In pump operation: Required shaft power: 177 kW Required electric motor: 200 kW NPSH value: 6.9 Efficiency: 85.28% Maximum operating temperature: 140°C Speed sensor: Yes !! Price per unit !!

Condition: good (used), Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Unit comes from: grinding machine WERKO SKSt 200 -Motor: VEM type KMR 56 G 4 -Pump: 220/380 V/1360 rpm/0.18 kW -Dimensions: 470/570/H445 mm -Weight: 88 kg Dcsdpfx Aisfdg Igolen

Condition: excellent (used), strapping machine, strapping set, tensioning and sealing device, textile strapping set Dcedsvrdzwepfx Ailon -Manufacturer: Vematec, textile strapping set 19 mm with tensioning device, unwinder, accessories -Steel reel: with 2x polyester tape width 19 x 1 mm -Staples/reel tensioners: see photos -Transport dimensions: 560/480/H480 mm -Total weight: 32.4 kg

Condition: excellent (used), Year of construction: 2000, For sale is a Jenoptik test table of the type T8000 Wavemove for housings The device is in very good condition and ready for immediate use with many additional attachments Year of manufacture: 2000 Weight: 2,500 kg The offer includes the components shown as well as computers and software Dcjdjvkxa Espfx Ailen Loading and/or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Dcsdezwu Dispfx Ailsn Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: like new (used), Year of construction: 2006, For sale: Huvema HU 360 x 1000 VAC conventional lathe, manufactured in 2006. This Huvema lathe is a robust and versatile machine for various metalworking operations. With a maximum turning diameter of approximately 360 mm and a turning length of 1000 mm, the machine is suitable for both general turning work and maintenance and repair tasks. The lathe is designed as a conventional machine, making it practical and easy to operate. The Huvema HU 360 x 1000 VAC is suitable for professional workshops, machine construction companies, maintenance companies, and metalworking businesses. Specifications Turning diameter over bed: 360 mm Turning length: 1,000 mm Turning diameter over cross slide: 220 mm Spindle bore: 38 mm Spindle speed: 30 – 2,200 rpm Motor power: 2.5 kW Voltage: 400 V Tailstock spindle: MK3 Tailstock diameter: 45 mm Tailstock travel: 110 mm Number of feeds: 40 Metric thread cutting: 0.4 – 7 mm Spindle nose: D1-4 / Camlock Dimensions Length: approx. 1,920 mm Width: approx. 920 mm Height: approx. 1,298 mm Weight: approx. 750 kg Dcedpfxjzwpfnj Ailon

Condition: excellent (used), Year of construction: 2012, We offer the VEMAG Filler Robby 2 vacuum stuffer from 2012 – a high-performance machine for stuffing and portioning meat fillings in meat and food processing plants. The Robby 2 model is a proven solution for manufacturers of sausages, deli products, meat fillings, and convenience foods. VEMAG Robby 2 performs well in processes requiring precise product mass feeding and consistent product quality. This machine is designed for daily production work and is valued for its robust construction and practical application in modern food processing. Thanks to electrical specifications adapted for industrial use, the device can be successfully used as part of a production line or as a standalone stuffing station. Technical specifications: Manufacturer: VEMAG Model: Robby 2 Year: 2012 Power: 7.6 kW Filling capacity: up to 3,000 kg/h Capacity: up to 650 portions per minute Hopper capacity: 230 liters Portioning range: 5 to 60,000 grams SCCR: 5 kA rms Voltage: 220–240 V / 400–460 V / 575 V Current: 11 A E-Diagram: 137 890 002e Weight: 740 kg Machine dimensions: L: 2000 mm, W: 1300 mm, H: 1820 mm Advantages of the VEMAG Robby 2 stuffer precise stuffing and portioning of filling, suitable for the production of sausages and meat products, stable operation in industrial conditions, trusted VEMAG brand, ideal for facilities looking for a used, reliable stuffer. Dedpfx Aisy N Sgbjlocn

Condition: refurbished (used), Year of construction: 2022, operating hours: 50 h, EDM313MF30-SLM (second-life machine) Technical data: Travel ranges XxYxZ 620x420x400mm Workpiece table size 1000x600mm Tank size 1070x600mm Filling level of the working tank 400mm Distance table/electrode holder 150/550mm Workpiece weight max. 1500kg Machine dimensions 2550x2430x2500mm Machine weight 3900kg Equipment: Silver metallic paint New control cabinet Dcedpfxehwwtzj Ailen New control system win10 MF30 user interface Touch panel screen Manual control bar New filling filter + pump (speed-controlled) Generator exopuls+60A working current Table: steel/slots Electrode changer, 20 positions CO2 extinguishing system Warranty 12 months Completely new electrical system New drives with endat encoders Linear measuring system, resolution 0.0001mm New ball screws, bearings Cooling unit integrated Cartridge filter Automatic tool chuck

Condition: used, mileage: 89,900 km, power: 120 kW (163.15 HP), first registration: 06/2018, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, CO₂ emissions: 216 g/km, fuel consumption (extra-urban): 7.5 l/100km, fuel consumption (combined): 8.3 l/100km, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 6, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, onboard computer, parking heater, power assisted steering, soot filter, trailer coupling, C42 Stabilizer bar, rear axle, mounted under the frame, F61 Interior mirror, PB3 Master code for official vehicle specifications, Intax, C45 Reinforced stabilizer bar on the front axle, E43 Trailer socket, 13-pin, F66 Lockable glove compartment, H20 Heat-insulating glass all around, J65 Outside temperature display, JW6 ASSYST service interval display, F68 Heated and electrically adjustable exterior mirrors, R65 Spare wheel holder under the frame end, JG0 Shift point indicator, RS3 Steel wheels 6.5 J x 16, S04 Adjustable passenger seat, Y44 Warning triangle, Y43 Hydraulic jack, RG8 Tires 225/75 R16 C, KA8 Particle sensor, XO9 Mercedes-Benz MobiloVan with breakdown assistance and extended warranty, ZG1 All-wheel drive, switchable, SA5 Airbag, driver, F35 Rear window, SA6 Airbag, passenger, EN6 Audio 10, T75 Grab handles for driver and passenger entry, X30 Vehicle registration certificate, Part II, IF4 Chassis with double cab, HH9 Semi-automatic climate control system TEMPMATIC, KB0 Main fuel tank, 100 liters, JD2 Digital tachograph, EG compliant, with download capability, Y10 First aid kit, C21 Rear suspension, two-stage, ES0 Jump start – connection, SB1 Comfort driver's seat, FU5 Exterior mirrors without turn signal indicators, H00 Warm air duct to the passenger compartment, L44 Side turn signal lights, front, VY2 Fabric Tunja, black, Q22 Trailer coupling, fixed ball head, R87 Spare wheel, HI1 Climate zone 1 (cold/comfort), S22 Armrest for driver's seat, P02 Platform body with aluminum side panels, IG3 Sprinter Standard, XU1 Signage / printed materials, German, Z41 Approval as a truck, RM1 M+S tires, S25 Armrest for passenger seat, LE1 Adaptive brake light, XM0 Model upgrade, C71 Underrun protection, EG compliant, V07 Rear panel trim, Y26 Wheel chock, RM9 Tire brand, special request, E33 Battery management, H12 Auxiliary hot water heater, J10 Speedometer, km/h, J58 Seatbelts. We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Furthermore:!! Leasing/financing and trade-in options available! !! !! -Errors and prior sale excepted! Dcodpfxozunrne Ailjn -All information without guarantee ... more on our homepage.

Condition: ready for operation (used), Stöber FDS50007/L HW 19 SW V5.3C Posidrive servo drive, serial number: 8712903, MDS5000 LEA5000 . 49029, device number: 8706279, SW HW 3, used, in good condition, fully functional, scope of delivery as shown in photos. Dcodpfxoz Ac Iys Ailjn

Condition: used, mileage: 60,000 km, power: 120 kW (163.15 HP), color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, airbag, central locking, power assisted steering, seat heater, = Additional Options and Accessories = - Passenger airbag - Electronic window lifters - left - Electronic window lifters - right - Driver airbag = Notes = - To ensure you receive the best possible advice, we kindly ask you to schedule an appointment. Mr. J. Ebert will be happy to assist you. Dodpfx Aiezbzhdjljcn NIGHT BLACK, FABRIC BLACK / ANTHRACITE, VEHICLE PRODUCTION LOCATION RASTATT, PARKING PACKAGE, MIRROR PACKAGE, URBAN / PROGRESSIVE PACKAGE, DIGITAL PACKAGE, CONNECTIVITY PACKAGE PREMIUM, EQUIPMENT PACKAGE ENTRY, SEAT COMFORT PACKAGE, LIGHT AND VISIBILITY PACKAGE, SMARTPHONE INTEGRATION PACKAGE, SMARTPHONE INTEGRATION CARPLAY, SMARTPHONE INTEGRATION ANDROID AUTO, REAR VIEW CAMERA, REAR SEAT BELT STATUS INDICATOR, LUMBAR SUPPORT ADJUSTMENT, ACTIVE PARKING ASSISTANT, ACTIVE LANE KEEPING ASSISTANT (CAMERA), INTERIOR MIRROR WITH AUTOMATIC ANTI-GLARE FUNCTION, COLLISION WARNING SYSTEM WITH ACTIVE BRAKING FCW-STOP, THROUGH-LOADING FEATURE, KNEE AIRBAG, RAIN SENSOR, DOUBLE CUP HOLDER, RAIN SENSOR, HARD DRIVE NAVIGATION, AUTOMATIC 8-SPEED TRANSMISSION, CRUISE CONTROL, HEATED STEERING WHEEL, TIRE PRESSURE MONITORING SYSTEM (TPMS) HIGH LINE / MID LINE, COMFORT SUSPENSION, EXTERIOR MIRRORS, LEFT AND RIGHT, FOLDABLE, TRAFFIC SIGN RECOGNITION, DIGITAL RADIO STANDARD DAB (DIGITAL AUDIO BROADCAST), SUN VISOR WITH ADDITIONAL FUNCTION, CLIMATE CONTROL, ROOF LINING FABRIC GRAY, AUTOMATIC HIGH BEAM ASSIST PLUS (IHC+), HEADLIGHTS LED DYNAMIC RIGHT-HAND TRAFFIC, ADDITIONAL USB PORTS, ROLLER BLIND CLOSED, AC CHARGING FUNCTION WITH 3.7 KW CHARGING POWER, DARK TINTED GLASS, CENTRAL DISPLAY MID (9 INCH TO 11.5 INCH), HEATED DRIVER AND PASSENGER SEATS, HEATED WINDSHIELD WASHER SYSTEM, AUTOMATIC REAR DOOR, ADJUSTMENT OF STEERING WHEEL CONTROLS FOR ASSISTANCE SYSTEMS, I-SIZE MARKING (ISOFIX SUCCESSOR), DRIVING PROGRAM SELECTOR (AGILITY SELECT), SPORTS STEERING WHEEL SPLIT LEATHER SMOOTH, DISPLACEMENT 1.4 LITERS, R4 PETROL ENGINE M282 1st owner (German vehicle), We would be happy to provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Errors and prior sale excepted - Electronic immobilizer, ESP, Navigation system, Service booklet available, Warranty, Rain sensor, Electric side mirrors, Bluetooth, On-board computer, Hands-free system, Multifunction steering wheel, Isofix, Light sensor, Non-smoking vehicle, Start/stop system, Lane keeping assist, Emergency brake assist, Armrest, Heated steering wheel, Electric tailgate, Leather steering wheel, Lumbar support, Driver drowsiness detection, Emergency call system, Tire pressure control, Gearshift paddles, Sound system, Voice control, Touchscreen, USB, Traffic sign recognition, Glare-free high beam, Winter package, Distance warning, WLAN / Wifi hotspot, Apple CarPlay, Android Auto, Fully digital instrument cluster, Interior mirror with automatic anti-glare function, Speed limiter, Plug-in hybrid, High beam assistant, Tinted windows, Electric side mirrors foldable, Distance warning = Further Information = Engine displacement: 1,332 cc Number of owners: 1 Please contact Tobias Ebert for further information.

Year of construction: 2011, condition: used, For sale are three used vertical, free-flow centrifugal pumps from Emile Egger Pump & Co. AG, manufactured in 2011. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Dcodpfx Aoga Drqsiljn Serial number: T 214050 and T 214050 Year of manufacture: 2011 L/s: 2.77 1/min: 1800 m: 14.7 Connections: DN50 and DN65 Length: 192 cm Quantity: 3 Motor data: Manufacturer: VEM motors GmbH Year of manufacture: 07/2011 Type: IEC/EN 60034-1 Serial number: 186889/0003, 186889/0001H, and 186889/0002H kW: 5.5 HP: 7.5 V: 400 A: 10 1/min: 1470

Condition: used, Year of construction: 2008, operating hours: 14,357 h, axle configuration: 4x4, power: 129 kW (175.39 HP), maximum speed: 80 km/h, first registration: 03/2008, color: orange, empty load weight: 7,277 kg, maximum load weight: 4,723 kg, overall weight: 12,000 kg, number of seats: 2, gearing type: other, mileage: 14,358 km, suspension: steel, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, air conditioning, all wheel drive, cabin, onboard computer, power assisted steering, trailer coupling, * German vehicle * 1st owner * Condition, see photos * Mulag verge mower head RMK1200 * Working width: 1,200 mm * Mounted on Mulag boom MRS300 * Reach: 3.00 meters * Drive via PTO shaft * Mulag rear boom MHS800 * Lateral displacement: 1,600 mm * Reach right & left: 8.70 meters * with Mulag mower head MK1200 * Working width: 1.20 meters * Municipal hydraulics & rear hydraulics * Rear power lift * Height-adjustable trailer hitch * Trailer load: 32,845 kg * Comfort cabin with 2 seats * Air conditioning * Windshield heating * Outside temperature display * Comfort driver's air suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * Rotating beacon lights * Distance warning lights * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor unit, agricultural tractor Djdpfx Aijxiyqfoljcn * Wheelbase: 3,000 mm * GVWR: 12,000 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false expectations regarding the condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to change, prior sale and errors.

Condition: used, Industrial vacuum filler Vemag HP 15 E A reliable German powerhouse for medium-sized and large butcher shops. Ideal for the production of all types of sausages, frankfurters, pâtés, and processed meat products. Main advantages: Perfect product quality: The gentle conveying system protects the filling material, guarantees a clear cut, and prevents air inclusions. Highest weight accuracy: The precise servo drive portions to the gram, which minimizes raw material loss. Versatile: Seamless synchronization with all common clipping machines (Poly-Clip, Alpina), cutting and forming lines. Dcsdpfx Ajzcazfeilen High performance: Processes even very firm and cold masses effortlessly with a filling pressure of up to 45 bar. Technical data at a glance: Filling capacity: up to 14,000 kg/h Portioning speed: up to 700 portions/min. Portioning range: from 5 g to 100 kg Hopper capacity: 250 / 350 liters Control: Vemag PC control (graphic display, program memory)

Year of construction: 2004, condition: used, cutting range 90°: 90 mm cutting range 45°: 75 mm Saw blade diameter 315 mm Table dimensions 800 x 500/400 mm Dodpfx Aiod Ih Nkoljcn Saw blade 30 mm machine weight ab. 45 kg dimensions 850 x 600 x 430 mm

Condition: used, This listing is for the Radiant Innovation ZG10U Wall Mount co2 Monitor with receiver The unit is in full working condition and is ready for immediate use The ZG10U Wall Mount CO₂ Monitor by ZyAura is a professional indoor air quality monitoring device engineered for environments where accurate CO₂ measurement and ventilation control are essential. It utilizes advanced sensing technology and supports automated safety alerts for confined spaces. Key Features & Specifications CO₂ Measurement Range: 0–50,000 ppm (parts per million) Sensing Technology: Dual Beam NDIR (Non-Dispersive Infrared) – ensures precise and stable long-term CO₂ detection Accuracy: ±100 ppm or ±5% of reading (whichever is greater) Temperature Monitoring: 0°C to 50°C (32°F to 122°F) Display: Large digital LCD that clearly shows ambient CO₂ concentration and temperature Alarm System: Audible and visual alerts with configurable alarm thresholds (AL1 and AL2) Relay Output: Controls external devices (e.g., fans or CO₂ generators) Output: 30 VDC or 250 VAC, max 2A, SPST, Normally Open Automatic Ventilation Control: Relay output can trigger ventilation (e.g., fan) in confined spaces based on CO₂ levels IP Rating: IP54 Splash Proof Protection for the Sensor Unit (SEU), excluding the backside when mounted on a wall SEU + RDU Modular System SEU (Sensor Unit) connects with up to 3 RDUs (Remote Display Units) via 7-meter communication cables Ideal for safety notices in multiple locations or rooms Remote units mirror real-time CO₂ and temperature data from the SEU Common Applications Offices and meeting rooms Classrooms and educational facilities Laboratories and research centers Industrial warehouses and storage units HVAC system integration for smart ventilation Installation Dedpfxsxv A Dbj Ailjcn Wall-mounted design (recommended ~0.45 m from the floor) AC adapter power supply (110/220 VAC) Easy relay connection to ventilation or safety systems Radiant Innovation ZG10U Wall Mount co2 Monitor with reciever

Condition: refurbished (used), This versatile Rovema VPR 250 is the perfect solution for efficient and precise packaging. It is a ‘Second Life’ machine that has been fully refurbished to like-new condition. Suitable for both gusseted bags and pillow bags. Technical specifications: Brand/Model: Rovema VPR 250 Dodpfx Ajiwdhujilocn Capacity: up to 120 packages per minute Size range (W×L): 70–250 mm × 80–350 mm Options: TTO printer, label dispenser, dosing unit, and more Warranty: 12 months Delivery time: On request Displayed at the Empack 2024 trade fair in Gorinchem

Condition: refurbished (used), Year of construction: 2021, Project-related overhaul completed in 2020–2021. Originally built in 1991 and fully refurbished by DL Packaging in 2021. Now available again! Dcodpfxjx Dapws Ailjn Since the refurbishment, the machine has operated for only approx. 150 hours – available immediately. Included: FS 110 forming set for pillow bags, 110 mm width FS 180 forming set for pillow bags, 180 mm width Markem X65 TTO printer The machine can produce both pillow bags and block-bottom bags. Includes SDX, printer, and forming sets. Capacity: 50–80 bags/min, depending on bag format, film thickness, filling product, dosing system, and synchronization. Delivery time: On request. If you are interested in this machine, it will be modernized by DL Packaging according to your product and specific requirements.

Condition: used, Belt conveyor Dsdpfx Ajz An Rtsiljcn Total length: ~17 m Dismantled into 2 sections: Section 1: ~8.8 m Section 2: ~8.4 m Manufacturer / model: VEM motors KPER 112 M4 electric motor Power: 4.0 kW Conveyor belt included

Condition: used, Year of construction: 2006, functionality: unexamined, For sale: lot of 7 industrial electric motors and gear motors. Dcsdjzfwwbspfx Ailjn The lot includes: - Siemens electric motors - VEM ATEX explosion-proof motor - Gear motors with industrial gearboxes - Various sizes and power ratings Equipment originates from industrial application and has been professionally removed and stored. Condition: Used industrial surplus. Functionality has not been tested. Sold as shown in photos. Ideal for: - industrial maintenance - spare parts stock - conveyors - mixers - process equipment - machine builders Sale preferably as one complete lot. Location: Dunajská Streda, Slovakia (EU) Worldwide shipping possible.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input current: 15 A, Excellent condition machine from 2012, 15a, 400v, 12Kw. Dedpfxezl Dx Ej Ailscn Includes a folding unit and a feeding arm for wrapping. We speak English, German, and languages of the former Yugoslavia. Contact is also possible via WhatsApp.