Used Veb Rotary Table for sale (19,113)

Condition: new, table diameter 650 mm table load 600 Kg swivelling range 90 Grad Bdsdpfxjulbgae Amroh turning speeds 0,2 - 3,0 U/min total power requirement 0,55 + 0,4 kW weight of the machine ca. 0,28 t Welding rotary tilting table - Remote control - 2 x welding current transmission

Condition: used, machine/vehicle number: HR6-1200, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Bsdpfeyntrhox Amrodh Control cabinet. Three rotary table polishing machines are available.

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Bodpfx Amsqmfv Sjrjdh Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. Bodpfx Amodzp T Neredh The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: used, Year of construction: 1985, chucking diameter 315 mm table load 300 Kg turning speeds 0,1 - 4,0 U/min connected load frequency 220 V bore diameter 63 mm weight 0,09 t Dimensions (LxWxH) 0,8 x 0,6 x 1,2 m Welding turntable incl. Bedpfx Amez Dky Dorodh - 315 mm chuck - 3-axis torch holder - Cutting torch - Machine base frame

Condition: used, table diameter 400 mm table load . t table height . mm The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team Bdodozc Rtfspfx Amrjh

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Bjdpfxjzgtyhs Amrodh Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Year of construction: 2002, condition: good (used), machine/vehicle number: 8280, Offer 21463 Technical data: - Max. load capacity 10000 kg - Turntable dimensions 1400 x 1400 mm Bodpfx Ashfwnqsmrjdh - Turntable hydraulically swivelable 0 - 90 / 135 ° - Rotation speed continuously adjustable 0.05 - 1.2 rpm - Clockwise and counterclockwise rotation controllable - Welding current transmission approx. 500 A - Power supply 400 V - Table height in horizontal position approx. 2500 mm - Electric remote control - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Condition: used, rotary table 400mm Bsdpfxsvpvh Ro Amrodh

Condition: new, table diameter 180 mm 10 Kg Bsdpfxjvn Uy Ns Amredh 5 Kg chucking diameter 65 mm turning speeds 2 - 10 U/min swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 15 Kg dimensions of the machine ca. 400 x 400 x 400 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: excellent (used), Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit. PRODUCT TYPE: S10 TYPE CODE: S10.1-1HH 1000kg / 2000 Kg LIFTING CAPACITY (KG): 1000 / 2000 Kg STROKE (MM): 1000 Bedpfx Aozbl Sgjmredh ARM LENGTH (MM): 1500 / 2000 BENDING MOMENT CLAMPING PLATE (NM): 1400 BENDING MOMENT ARM (NM): 3000 FREQUENCY CONVERTER: yes LIFTING DRIVE: hydraulic SELF-WEIGHT (KG): 1700

Condition: reconditioned (used), - Table dimensions: 1,250 mm x 2,500 mm - Table positions: 4 Bedpfezx Sd Asx Amredh - Table rotation via a toothed crown gear (HIRT type) - Maximum load capacity: 2,000 kg - Equipped with a hydraulic unit - Height from base to table: 530 mm - Overall height: 700 mm

Condition: new, table diameter 340 mm table load 290 horizontal kg Bsdpfxsxaafqe Amrsdh table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. Bedoxabm Njpfx Amrjdh - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: Bedsxaatnjpfx Amrjdh - control (integrated) - foot switch

Condition: good (used), Welding rotary table KT 300 Load capacity, horizontal: 300 kg, tilted: 150 kg Power consumption: 220 V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Bdsdpfx Aob Am Tgjmroh Includes foot-operated remote control Optional extra: Quick-change chuck Diameter 300 mm, €450.00

Condition: good (used), Welding rotary table KT 300 Load capacity, horizontal: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Bsdpfx Asb Dymhomrsdh Height: 500 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Includes foot-operated remote control Optional extra: Quick-release chuck Diameter 300 mm, €450.00

Condition: used, Rotary table, make WMK 'Fritz Heckert' Model D315 k TGL 28 561/01 Bsdpfx Amozw H Rhorodh Serial number 33402 • Clamping surface D = approx. 310 mm

Condition: new, table diameter 1500 mm table load 5,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 10000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,5 + 3,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). Bodpfxsfv Axfo Amrsdh No original pictures. Design but identical.

Condition: new, table diameter 2000 mm table load 10,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min Bedpfofv Axisx Amrsdh max. torque on the faceplate 20000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 3,0 + 4,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 600 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,8 U/min max. torque on the faceplate 450 Nm table pass 80 mm welding current 500 Ampere total power requirement 0,18 + 0,18 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. Bedpfx Asfv Awzsmrjdh • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1200 mm table load 1,2 t swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t Bodpjfv Aw Nsfx Amrodh ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 2,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. Bsdpfx Amefv Aw Tjrodh • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right).

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. Bdsdpfxofv Axme Amrsh • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 3,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. Bdodpefv Axbsfx Amroh