Used Vacon Danfoss Nxi01405-A0T0Css-A1Afa50000 for sale (201)

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves Hsdpfx Aswmh Hreitofn XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Hsdpjhabllsfx Aitofn -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 38,900 mm, total length: 9,800 mm, · Drehung 360 Grad (durchgehend) Hfsdpjxd E Npefx Aiton · Nennleistung 175 kW (238 PS) bei 2.300 U/min · Max. Drehmoment 975 Nm bei 1.380 U/min · Hubraum 5,13 l · Zylinderzahl 4 in Reihe · Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung · Kühlanlage Wassergekühlter Ladeluftkühler · Antrieb: Hydrostatisch · Modell Danfoss / Rexroth · Max. Druck 480 bar · Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. · Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt · Typ Achsen mit Planeten-Endantrieben · Hinterachse Lenkende Pendelachse mit hydraulischer Sperre · Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad · Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt · Feststellbremse Negativbremse, hydraulisch betätigt · Reifengröße 445/65 R22,5 · Max. Fahrgeschwindigkeit 40 km/h · Max. Zugkraft am Lasthaken 152 kN · Steigfähigkeit 65% · Wenderadius (mit Gabelzinken) 6.970 mm · Dieselkraftstoff 270 l · AdBlue 40 l · Motoröl 16 l · Kühlflüssigkeit 40 l · Max. Betriebsdruck 350 bar · Anlagentyp Load sensing · Betriebspumpe Danfoss / Rexroth - Verstellpumpe · Verteiler für Ausleger- und Oberwagenbewegungen Danfoss - Elektroproportionalventil SIL 2 · Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren · Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver seat - DAB radio - Differential lock - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air horn - Particle filter - PTO - Radio/Multimedia system - Rotating beacon - Rear view camera - Disc brakes - Sunroof - Sleeper cabin - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield Internal number for customer inquiries: Reference vehicle -> 3-150 MAN TGX 33.520 6x4 BLS with FASSI F485RA.2.28 xe-dynamic loading crane. Loading crane and superstructure: F 485RA.2.28 xe-dynamic Endless slewing range All hydraulic cylinders are double-acting Double-knee linkage system with PROLINK FASSI stability control FSC including LMB II Radio remote control, Fassi V7S Radio maxi-6 linear outriggers and color display FL system (Full Lift) switchable quick-gear valve for the outriggers Max. outreach 20.95 m with 1,325 kg lifting capacity (optional extendable to 24.95 m) Electronic overload protection with FX900 Danfoss D850 control valve Work lights Control system for additional function »Winch / xe-dynamic PAVIC semi-trailer crane superstructure in compact design Ball joint bearing on the superstructure to allow separate use of a ballast box (ballast box 3600 x 2480 x 800 mm, approx. €14,500 net) Vehicle: MAN TGX 33.520 6x4 BL SZM Technically permissible total weight 73,000 kg Engine D2676LF78 - 520 hp EURO 6e - 2650 Nm C -R OBD-D MAN TipMatic 12.28 OD, with Retarder 35 Driving program MAN TipMatic Performance, up to 70,000 kg Extension of driving program MAN TipMatic, 70,000 kg to 90,000 kg, heavy transport Driving program MAN TipMatic Offroad, up to 70,000 kg Rear axle Hypoid HYD-1370/HY-1350 Differential lock in rear axles Fuel tank 370l right and 60l AdBlue Drive 6x4 Wheelbase 3300+1350 mm Suspension Leaf/Air ECAS air suspension system Rear frame overhang 750 mm Trailer coupling ROCKINGER 400G150A Hfjdpfsylxrzex Aitsn Trailer coupling for pulling a semi-trailer (factory conversion) Fifth wheel coupling JOST JSK 37 C, mounting height 185 mm with integrated lubrication Fifth wheel distance 1125 mm Fifth wheel plate 40 mm, manufacturer JOST (fifth wheel load up to 36t) Cab GM: the spacious one (wide, long, medium height) Glass sunroof, electric Control panel MAN EasyControl, 2 functions, can be operated from the outside when the door is open Driver comfort seat, air-suspended with lumbar support, shoulder adjustment and heating 2 sleeping berths Cool box under sleeping berth, fully retractable Storage compartment on the rear wall of the cab with swan-neck light and control module MAN Media System Navigation Professional 12.3 inches Infotainment control MAN SmartSelect with touchpad and direct selection buttons Smartphone integration Lane departure warning system LDW Digital axle load display (ALM) in the cab for air-suspended axles and more. Financing / leasing, as well as...

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 34,900 mm, total length: 9,290 mm, - Drehbarer Teleskopstapler RTH 6.35 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 34,90 m - Drehung 360 Grad (durchgehend) - Motor: Typ Volvo TAD 583 VE, Stage V - Nennleistung 175 kW (238 PS) bei 2.300 U/min - Max. Drehmoment 975 Nm bei 1.380 U/min - Hubraum 5,13 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 152 kN - Steigfähigkeit 65% - Wenderadius (mit Gabelzinken) 7.000 mm Hfsdpoydqv Njfx Aitsn - Dieselkraftstoff 270 l - AdBlue 40 l - Hydrauliköl 220 l -Motoröl 16 l - Kühlflüssigkeit 40 l - Max. Betriebsdruck 350 bar -Anlagentyp Load sensing - Betriebspumpe Danfoss / Rexroth Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss Elektroproportionalventil SIL 2 - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtunf - Steuerung mit CAN-Bus-Technologie

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 174 kW (236.57 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,660 kg, input voltage: 400 V, total width: 1,100 mm, total length: 4,700 mm, total height: 2,240 mm, warranty duration: 6 months, AIRCOOLED CHILLER KTK JWA FC 172 S/K/P PS 174 KW Cooling capacity: 174.0 kW / 49.47 tons (15/10 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Freecooling. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH184A4ALB (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM90B14S2/330 E3 Dimensions: 4.7x1.1x2.24 m Weight: 1660 kg Working hours: 4174/4174/4174/4174 h.h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Hedpfx Ajzvbi Ajitsfn The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Detachable platform body, Jost fifth wheel coupling, fully clad in stainless steel (V2A) Commercial tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side exhaust silencer, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left 35 l AdBlue tank capacity, right Air compressor, 1 cylinder, 360 cc, with fuel-saving system Pneumatically controlled air dryer Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN diesel engine D2676 LFAX, 382 kW (520 hp), 2,650 Nm torque, Euro 6e Heated fuel filter, for fuels up to cleanliness class 25 Fuel pre-filter, with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as option at extra charge) Unlimited slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle boom system with PROLINK (overbending offset boom by up to 12°) Electronic overload protection with FX900 FASSI stability control FSC incl. LMB II Emergency stop, with optical alarm (90% and 100%) Hedpswllmmsfx Aitofn Pressure limiting and load holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and pressure value display (in bar and %) and 90%/100% warning on display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied piped Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base Hydraulic outriggers, extendable on both sides, support width 8.84 m Supports operated via radio with proportional control block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hook and mounting clevises (short / 500 mm) Travel position: boom folded transverse to vehicle direction Note: Observe onboard voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 connection box Low profile foundation 180° hydraulically upward-and-outward swinging support legs / both sides Control system for auxiliary function - winch / xhe-dynamic Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work lights operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LEDs for 2 support legs, not mounted (crane) LEDs for 2 support legs, not mounted (additional outriggers) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS Radio remote control V7 RCS Fassi radio remote control V7S: available with 6 or 8 functions, with linear levers or joysticks. V7S with 4.3" color display / 24bit – 480 x 272 px, with 8 push buttons Engine start/stop, speed up/down, 6 x ON/OFF functions, 10m cable and various working speed regulations, incl. spare battery, charger, neck and waist belt

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) Hodpfx Aisyxa Dtstsfn AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres Hfedpsq Hgg Uefx Aiten ■ Hardware and software (includes VACON 110 machine control) ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 380.9 kW (517.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,147 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,350 mm, total height: 2,450 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE CGAM140 380.9 KW Cooling capacity: 380.9 kW / 108.3 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Hodpezqzrgjfx Aitjfn Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHN315 (scroll) + 2 pcs. Danfoss CSHN250 (scroll) Type of refrigerant: R410A Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Wilo, buffer tank 762 l, expansion vessel 60 l. Dimensions: 5.35x2.3x2.45 m Weight: 4147 kg Working hours: 7343/3545/6326/7990/5866/6489 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC Hsdpfx Aijk Sgwaetsfn 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 261 kW (354.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,564 kg, input voltage: 400 V, total width: 2,260 mm, total length: 2,420 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RBP 260 0014 PE 261 KW Cooling capacity: 261 kW / 74.21 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum. Compressors: 4 pcs. Danfoss SH295A4ACE (scroll) Type of refrigerant: R410А Number of fans: 4 pcs. (Frequency inverter) Dimensions: 2.42x2.26x2.3 m. Weight: 1564 kg. Working hours: 602/592/1937/1912 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; Hfjdpszxnfiofx Aitjn - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 270 kW (367.10 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,580 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,340 mm, total height: 2,290 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA NX2 G06 Y 0294T 270 KW Cooling capacity: 270 kW / 76.77 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 4 pcs. DANFOSS DSH295A4APC (scroll) Hfodpfx Ajzxdcdeiton Type of refrigerant: R454B Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3 Dimensions: 4.34x2.25x2.29 m. Weight: 2580 kg. Working hours: 6233/6233/6233/6233 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 181 kW (246.09 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,913 kg, input voltage: 400 V, total width: 2,300 mm, total length: 2,460 mm, total height: 2,370 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RB0182 B0394 PE 181 kW Cooling capacity: 181 kW / 51.47 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Hedpfxozwvmfj Aitofn Condenser: Microchannel, Aluminum Compressors: 1 pcs. DANFOSS SH300B4ACC (scroll) + 2 pcs. DANFOSS SH240A4ACE (scroll) Type of refrigerant: R410а Number of fans: 4 pcs. Hydraulic module: 2 pcs. water pump WILO DPL65/130-4/2, expansion vessel. Dimensions: 2.46x2.3x2.37 m. Weight: 1913 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 109 kW (148.20 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,300 kg, input voltage: 400 V, total width: 1,160 mm, total length: 3,080 mm, total height: 1,940 mm, warranty duration: 6 months, AIRCOOLED CHILLER UNIFLAIR ISAF1221A 109 KW Cooling capacity: 109 kW / 31 tons (12/7 — 35°C) Year of manufacture: 2014 Options: Hydraulic module. Freecooling. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Danfoss VSH170AGANA (scroll, inverter) + 1 pcs. Danfoss SH180B4ABE (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Lowara CIE370/5/D (inverter) + 1 pcs. Lowara CIE370/2/D (Freecooling), expansion vessel. Dimensions: 3.08x1.16x1.94 m Weight: 1300 kg Working hours: 23605/11758 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. Hfjdpfx Aezwu Uboiton LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Danfoss, solenoid valve coil unused in original packaging Hfsdpofy R Rujfx Aitjn -Type: BB230AS -Voltage: 230 V/10 W -Price: per piece -Number: 21 piece -Dimension box: 65/55/H75 mm -Weight: 0.3 kg/piece

Condition: used, Stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Danfoss, solenoid valve coil -Type: BB230AS -Voltage: 230 V/10 W -Price: per piece -Number: 8 piece -Dimension box: 70/45/H95 mm Hsdpfxjfy R Rxe Aitefn -Weight: 0.3 kg/piece

Condition: used, Year of construction: 2011, functionality: fully functional, cooling capacity: 161 kW (218.90 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,500 kg, input voltage: 400 V, total width: 2,300 mm, total length: 3,620 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller TRANE ECGAN600 161 KW Hjdpeyzzxqjfx Aitjfn Cooling capacity: 161 kW / 45.78 tons (12/7 — 35°C) Year of manufacture: 2011 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHA150KE (scroll) Type of refrigerant: R407с Number of fans: 6 pcs. (2 pcs. frequency inverter driven) Dimensions: 3.62x2.3x2.3 m. Weight: 2500 kg. Working hours: 18195/18195/14900/14910 h. Condition: Good Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of cooling: air, overall weight: 2,310 kg, total width: 1,100 mm, total length: 4,400 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 265.5 kW (360.98 HP), HEAT PUMP KEYTER KWE6270QEP4W 265,5 Kw Heating capacity: 265.5 kW / 75.6 tons (40/45 — 7°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 2 pcs. Hfedpfevf Ebxjx Aitjn Condenser: Copper / Aluminum Heat exchanger: Plate Type of refrigerant: R410A Compressors: 2 pcs. DANFOSS DSH240A4APC + DANFOSS DSH295A4APC (scroll) Number of fans: 3 pcs. EBMPAPST A3G800-AU25-01 Hydraulic module: 2 pcs. water pump EBARA 30/1 50-160/7.4 expansion vessel. Weight: 2310 kg. Dimensions: 4.4 x 1.1 x 1.8 m. Working hours: 1024/1024/1477/1474 h. Condition: Excellent

Condition: new, mileage: 400 km, power: 352 kW (478.59 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.480 6x4H-4 BL CH HydroDrive ? Vehicle type: Flatbed truck and chassis, suitable for crane mounting ? Cab color: black with day registration 2025 Engine ? Type: MAN D2676 LF85 ? Power: 352 kW (480 hp) ? Torque: 2,400 Nm ? Emission class: Euro 6d Transmission ? MAN TipMatic 12-speed automatic transmission ? Reinforced single-plate clutch (430 mm) ? Driving programs: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis ? Wheelbase: 3,600 mm ? Overhang: 1,950 mm ? Main wheel spacing (between rear and tag axle): 1,350 mm ? Frame height above cab: up to 4,000 mm ? Frame longitudinal member thickness: 8 mm ? Frame end: straight Axles ? Front axle: 9,200 kg, steered, HydroDrive without through drive ? Rear axle: 13,000 kg, HY axle, not steered, without through drive ? Tag axle: 9,000 kg, steered, liftable, not driven ? Axle ratio: i = 3.70 Air suspension ? Electronically controlled air suspension (ECAS) on tag axle ? Automatic level adjustment ? Spring capacities: VA 9,500 kg / HA 13,000 kg / NA 8,000 kg Brakes ? Electronic brake system (EBS) ? ABS, ASR ? High-performance engine brake MAN EVBec (stepped) ? Disc brakes on all axles ? Electronic parking brake Tires and rims ? Front axle: 385/55 R22.5, steel rims 11.75x22.5 ? Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 ? Tag axle: Michelin 315/70 R22.5, Alcoa matte Cab ? Type: FN, flexible, narrow, normal height ? Comfort seats: air-sprung, seat heating, armrest ? Multifunction steering wheel ? Central locking ? Climatronic air conditioning system ? Lower comfort bunk ? Storage space in seat console and storage compartments ? Interior styling: Moon Grey ? Sun visors, tilting roof ? Various storage compartments ? USB sockets ? LED lighting Permissible loads ? Technically permissible gross weight: 26,000 kg ? Axle loads: VA 9,000 kg / HA 11,500 kg / NA 7,500 kg ? Technically permissible trailer load: max. 30,000 kg Tanks ? Fuel tank: 400 l ? AdBlue tank: 60 l Driver assistance systems ? ESP, ASR, cruise control ? Emergency brake assist ? Lane departure warning ? Digital tachograph ? Advanced navigation system (7 inches) ? MAN SmartSelect Interface for superstructures ? Pre-installation for crane mounting ? Trailer coupling: RINGFEDER Type 4040G150A ? Various electrical and pneumatic connections Hfjdpjy Sqqqofx Aiton Special features ? HydroDrive: Hydraulic front-wheel drive for more traction ? Comfort features for the driver ? Factory interfaces and pre-installations for municipal, construction, and emergency services as well as flexible superstructures - FASSI loading crane F545RA.2 xe-dynamic base unit ? Type: F545RA.2 xe-dynamic ? CE directive EN 12999 HD5S2 compliant ? Color: RAL 3020 traffic red, cylinders black Slewing range ? Continuously rotatable Hydraulics ? Double-acting hydraulic cylinders ? Piston rods hard chrome-plated Joint system ? Double knee lever system with PROLINK ? Knuckle arm can be extended by up to 15° Overload protection ? Electronic overload cut-out FX500 ? FSC stability control ? LMB II ? Emergency shutdown and optical alarm Valves & filters ? Pressure relief and holding valves ? High-pressure filter ? Separate hydraulic tank 180 l with filter and oil cooler on the base Control ? FASSI radio remote control RCH/RCS ? Display of pressure values ? Danfoss D850 control block with 4 control valves ? Emergency operation Outriggers ? Hydraulically extendable on both sides ? Outrigger width: 7.79 m Speed control ? Dynamic Control - load-depen

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer Hfodpfodzqn Dsx Aiton - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 465 kW (632.22 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,059 kg, input voltage: 400 V, total width: 2,300 mm, total length: 4,800 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 560 kW (761.39 HP), Aircooled chiller/Heat pump CARRIER 30RQ0522 0157 PEE 465 kW/560 kW Cooling capacity: 465 kW / 132.22 tons (12/7 — 35°C) Heating capacity: 560 kW / 159.23 tons (40/45 —7°C) Year of manufacture: 2011 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 8 pcs. Danfoss SH300A4ACB (scroll) Type of refrigerant: R410a Number of fans: 6 pcs. + 2 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump WILO DL65/170(163)-11/2 Carrier, expansion vessel. Dimensions: 4.8x2.3x2.4 m. Weight: 5059 kg. Working hours: 448/457/454/119/835/772/771/760 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Hodpfeybbgtjx Aitsfn

Condition: new, Danfoss 111.25.171.0A P1F6F5NNNN/NNNNN SNP3NN/033LN01FA SN: 2, unused, 100% functional, scope of delivery as shown in the photos. Hodszirptjpfx Aitefn

Condition: excellent (used), Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball valve, solenoid valve body -Manufacturer: Danfoss, solenoid valve for refrigeration technology, unused, original packaging -Type: EVR 20/032F1245 -Connection: 22 mm -Number: 2 solenoid valves available Hfodofx At Dopfx Aitsn -Price: per piece -Package dimensions: 275/120/H90 mm -Weight: 1.2 kg/piece

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 77 kW (104.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,400 kg, input voltage: 400 V, total width: 2,100 mm, total length: 2,600 mm, total height: 2,350 mm, warranty duration: 6 months, heating capacity: 87 kW (118.29 HP), Aircooled chiller/Heat pump DAIKIN EWYQ080 DAYN 77 kW/87 kW Cooling capacity: 77 kW / 21.9 tons (12/7 — 35°C) Heating capacity: 87 kW / 24.7 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss SJ180B4ABE (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. Dimensions: 2.6x2.1x2.35 m Weight: 1400 kg Working hours: 11860/11861 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Hsdpfeyymh Usx Aitefn Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.