Used Union Gera Bft 130 Nc for sale (8,917)

Condition: used, empty load weight: 15,900 kg, lifting height: 11,500 mm, mast type: telescopic, Year of construction: 2022, operating hours: 130 h, total length: 4,495 mm, construction height: 199 mm, fork length: 2,000 mm, fork carriage width: 1,700 mm, drive type: Elektro, load capacity: 8,000 kg, construction width: 1,850 mm, Rigid telescopic forklift Load center of gravity: 800 Fork width: 150 mm Fork thickness: 65 mm ISO class: Pin type Mast type: Telescopic Condition: As good as new Djdpet Eldpsfx Albocl Technical condition: Very good Front tires Type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Fork positioner, remote control

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Dsdeu Eki Sspfx Albjcl Type: Horizontal Drive: Electric

Condition: good (used), geared motor, electric motor -Engine comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 130 rpm -Power: 0.4 kW -Design: B5 -Shaft diameter: Ø 19 mm Dedpfx Alodqck Iobocl -Protection class: IP 44 -Number: 3x geared motors available -Price: per piece -Dimensions: 335/195/H110 mm -Weight: 10 kg

Condition: excellent (used), Hydraulic cylinder, support cylinder Dcedpfxjb A Hvlo Albsl -Piston diameter: approx. 130 mm -Piston rod: 100 mm -Stroke: approx. 700 mm -with support rollers -each cylinder with hand pump -Number: 3 cylinders available -Price: per piece

Condition: repair required (used), Hydraulic vise, machine vise, NC compact clamp -Handover in its current condition as inspected The vise has no spindle and is therefore sold as a source of spare parts. -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm Dodpfx Aeb A Ik Delbscl -Weight: 104 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Dcjdpsyi Acfsfx Albel -Hydraulic cylinder: double-acting, stroke 130 mm -Piston rod: Ø 37 mm -Hole: Ø 30 mm -Pitch spacing: retracted 425 mm -Number: 2 cylinders available -Price: per piece -Dimensions: Ø 83 x 500 mm -Weight: 9.3 kg/pc.

Condition: used, mileage: 206,000 km, power: 96 kW (130.52 HP), first registration: 04/2016, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, total length: 4,963 mm, total width: 2,050 mm, total height: 2,254 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, 2nd owner since 2018. German minibus. Only original 206,000 km. TÜV (roadworthiness certificate) valid until 02/2027. In 2025, €2,000 were invested in this Citroen Jumper, including: - Rear brakes NEW, parking brake partially new - Rear tyres NEW (all-season tyres) - Front tyres as-new (all-season tyres, DOT 17/2024) Last service in November 2024. Auxiliary heater (functions well). Air conditioning. Dcjdpfx Aev I Idbjlbol 9 seats. Radio system. Central locking with remote key. ABS. ESP. Electric windows and exterior mirrors. Unladen weight: "2025-2293 kg" as per vehicle registration certificate. Gross vehicle weight rating: 3,000 kg. Standard registration as "vehicle for passenger transport up to 8 seats / multi-purpose vehicle". Original COC (Certificate of Conformity) document available. Euro 6 emissions standard. 6-speed manual gearbox. The Citroen drives powerfully and very well. This offer is valid only for businesses, freelancers, farmers, forestry operations, and comparable legal entities. Sale to purely private individuals is strictly excluded. Subject to prior sale and errors at any time. Net price: €10,500. For export, we reserve the right to initially retain a deposit equal to the statutory 19% VAT until receipt of the final export confirmation (the export document or confirmation of arrival).

Condition: good (used), Technical data: Planing width: up to 300 mm Planing height: up to 130 mm Number of heads: 6 bottom – 5.5 kW right – 5.5 kW left – 5.5 kW top – 5.5 kW universal 360° – 5.5 kW Dcjdpjw Sh Dmjfx Albsl bottom – 7.5 kW Feed motor: 2.2 kW, stepless adjustment via inverter 4 feed rollers in the table

Condition: like new (used), I am selling a complete Yaskawe Motoman UPT 130 T robot. Dodeu Tk H Dopfx Albecl

Condition: new, Year of construction: 2025, Cutting length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric / NC control Dcodpfx Ajxzfwuolbol Saw blade tilt adjustment: electric / NC control Rip fence adjustment: electric / NC control Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Motor output: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1025 kg

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg Dcodewid Spopfx Albjl C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: good (used), Year of construction: 1970, Rail track gauge: 900 - 1680mm Max. wheel tread Ø: 1300mm Min. wheel tread Ø: 650mm Max. axle length wheel set:2350mm Min. axle length wheel set:2050mm Max. clamping Ø: 1050mm Min. clamping Ø: 700mm Face plate Ø: 1400mm Speeds / ranges: 31,6Rpm Number of slides: 2 Sjablone copy attachment: 2 Power: 90kW Length: 5400mm Width: 3600mm Height: 2900mm Dodswvkb Repfx Albocl Weight: 56000kg

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Dcjdpfsyf Uy Usx Albsl Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: used, The scope of delivery includes: 1x steel beam, used Material color: orange Box profile: 130 x 40 mm Agraffe: 4 HK (hooks) Overall length: approx. 2,780 mm Length of box profile: approx. 2,680 mm Dsdszvlrnjpfx Albscl Note: This is a former pallet rack crossbar that can no longer be used in its current form. If you separate the agraffe here, you will obtain a box profile with a length of approx. 2,680 mm. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, Elektror HRD 2 FU-130/7.5 high-pressure blower, serial number: 212/864490, with ATB VAF 100L/2C-11S motor, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Dcodpfx Aszkc Tljlbjl

Condition: excellent (used), Catalogue number 7721 TECHNICAL DATA Dcedpfxezrlraj Albjl - Working width: 1300 mm - Max. pass-through height: 60 mm - Rubber rollers: 2 pcs - Rubber roller diameter: 190 mm - Motor approx. 1.1 kW - Dimensions (L/W/H): 2020x770x1260 mm - Weight: 500 kg ADVANTAGES – used glue applicator – condition: very good Net price: 14,900 PLN Net price: 3,540 EUR depending on 4.2 EUR rate (Prices may change with larger fluctuations)

Condition: used, Scharmann Drilling Machine Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Lateral (Z): 1,150 mm Spindle speed: 20 – 6,000 min⁻¹ Table size: 1,200 × 1,400 mm Table load: max. 6 t Without tools and accessories. Disassembly begins after payment is received. Djdpfx Alozilmrobscl Collection in September. Being replaced with a new machine. Very important: • The height and weight of the asset must be taken into account when selecting the transport vehicle. • There is no loading dock on site. However, a forklift or an overhead crane is available for loading. • If collection is not carried out on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. • The sale is made excluding any guarantee or warranty. • The information provided consists of the technical data from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display Dcedey Hkd Hspfx Albol - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 1980, machine/vehicle number: PN 0312, Offer 26138 Technical data: - 90° cutting head, pneumatically operated - Cutting thickness: - Normal steel: up to 2 mm - Stainless steel: up to 1.5 mm - Aluminum: up to 3 mm - Blade length: 130 mm - Table size: W 600 x D 380 mm - Working height: 940 mm - Foot pedal - Compressed air requirement: 6 - 8 bar - Space requirement: approx. W 600 x H 1250 x D 850 mm - Weight: approx. 180 kg Dedpfsy U Hv Usx Albjcl

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,070 h, fuel type: electric, empty load weight: 613 kg, total length: 1,275 mm, drive type: Elektro, tractive force with load: 2,000 N, construction width: 600 mm, Tractor Technical condition: very good Battery voltage: 24V Dcedpfx Alozhydisbjl Battery Ah: 250Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2017 Battery condition: 60 - 80% Description: Inspection and UVV new Steering wheel, electric steering, battery discharge indicator

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle Djdpjzdk Hyofx Albjcl ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set for fix...

Condition: new, functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, color: other, overall weight: 12,400 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE DMK series are secondary impact crushers that leading to the crush of medium and high hardness materials, which are used after jaw crushers or primer impact crushers. DMK crushers are also designed to reduce wear costs while increasing capacity and cubic production. It reduces medium and high hardness materials such as limestone, dolomite, granite and basalt into the desired size of asphalt and concrete aggregate. The ease of maintenance and adjustment is one of the major advantages of this type of crusher. Hydraulic body opening system, adjustment of crushing plates from the outside, easy pallet and lining replacement ensure that these types of crushers can be used easily on site conditions. GENERAL SPECIFICATIONS AND FUTURES: -High capacity -High reduction ratio -Wear surfaces are protected by solid filler electrode welding -Hammers and crushing plates are manufactured from high manganese steel casting -Inner surfaces of the crusher is coated with wear resistant lining plates -Easy maintenance thanks to hydraulic adjustment system TECHNICAL SPECIFICATIONS • Model: FABO DMK-01 • Type: Secondary Impact Crusher • Capacity: 130-200 tph • Size: 1120 x 1000 mm • Max Feeding: 450mm • Motor: Heavy duty GAMAK, 160 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 12400 kg • Including chassis, motor and safety guards. Dcedjzibf Ropfx Albol FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, mileage: 455,245 km, power: 96 kW (130.52 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 3,320 mm, loading space width: 1,900 mm, loading space height: 2,050 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, 3-seater, power steering, driver airbag, 6-speed manual transmission, tachometer, power steering, electric windows, on-board computer, electric exterior mirrors, center armrest, single door/rear, side door/right, central locking + remote control, 5-pole power socket, Carrier Xarios 600 MT refrigeration unit, unladen weight: 2510 kg, payload: approx. 1000 kg, TÜV inspection (technical inspection) can be renewed upon request, etc. Errors and prior sale reserved. For sale only to commercial businesses and for export. Test/inspection drive to TÜV Dekra or Fiat is possible!!!! TÜV inspection can be renewed upon request!!!! All documents can be sent in advance by email or WhatsApp to check mileage, accident history, vehicle history, etc.!!!! WhatsApp!!!! !!!! Fg-8707 !!!! Key number 21!!!! Dcedpfozwrm Ijx Albjl

Condition: used, mileage: 326,000 km, power: 96 kW (130.52 HP), first registration: 01/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 1,900 mm, loading space height: 2,050 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, 3-seater, power steering, driver airbag, 6-speed manual transmission, tachometer, power steering, electric windows, on-board computer, electric exterior mirrors, center armrest, rear gullwing doors, side door/right, central locking + remote control, air conditioning, power socket, Carrier Pulsor 400 MT refrigeration unit, TÜV (technical inspection) can be renewed upon request, etc. Errors and prior sale reserved. Dedpezwrn Sefx Albecl For sale only to commercial businesses and for export. Test drive/inspection at TÜV Dekra or Fiat is possible! TÜV can be renewed upon request! All documents can be sent in advance via email or WhatsApp to check mileage, accident history, vehicle history, etc.! WhatsApp! !!!! Fg-8032 !!!! Key number 250 !!!!!

Condition: good (used), Year of construction: 2007, *Description:* Industrial column drill press *CINCINNATI CA NC320V*, year 2007. Made in France. Dcedpfxszvgn Ro Albjl High-end machine for precision drilling in a mechanical workshop. Column-mounted spindle with mechanical speed variation in 2 ranges. Cross table + vise included. Complete machine, available for inspection. *Specifications:* - *Make / Model*: CINCINNATI CA NC 320V 380 - *Year*: 2007 - Serial number 320838 - *Speeds*: 2-range variable speed: 80-625 rpm and 385-3000 rpm - *Spindle*: CM3 or CM4 taper, to be confirmed - *Table*: Cross table + vise, as shown in the photo - *Column*: Column with rack and pinion for motorized up/down movement - *Equipment*: Emergency stop, speed chart *Condition*: Very good condition. Recent and robust machine. On a pallet for removal. Testing possible on site. Removal by carrier.