Used Trafo-Union Tlun 7146 for sale (187)

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Hedswu Dcxspfx Ahgst Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel, with a working and maximum allowable pressure of 11 bar, is designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. The tank is made of galvanized steel sheet, providing an excellent protective barrier against external factors and corrosion and significantly extending the service life of the unit compared with standard painted tanks. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Galvanized Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. Galvanized finish – the tank surface is galvanized, providing an attractive appearance and high resistance to demanding conditions in workshops and production halls. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality construction – durable galvanized external coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Compliance with standards – the tank meets pressure equipment safety requirements and is suitable for registration with the Polish Office of Technical Inspection (UDT). Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a galvanized coating resistant to external factors and corrosion. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection ports: 6 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 130 kg Number of connections 6 Connection sizes 1 1/4", 2", 1/2" Dimensions 2030 × 600 mm Hodpfx Ahszwlzfogjt Tank capacity 500 L Working pressure 11 bar Maximum pressure 11 bar Wall thickness 4 mm Diameter Ø 600 mm Height 2030 mm

Condition: used, Year of construction: 2000, IMMEDIATE CLEARANCE SALES AUTOMATIC BED LINEN HEMMING, FOLDING & PACKING PLANT / COMPLETE set Sheeting hemming automate : AKAB AK 244 2437..748 short side / 132 2438 long side Yoc 1991 Max width 240 cm , With Singer sewing mc Speed 170 kpl/h, Sewing Lock 6kpl, Chain stitches and industrial stitches Sweing in Longitude and cross-sectional Duvet cover stitching automate : AKAB Yoc 1984, updated in 2005 with modern Omron logics with Union Special sewing mc , AK 156 2009 short side, 188 2010 long side Max width 180 cm Pillow case hemming automate : AKAB Yoc 1983, updated in 2005 with modern Omron logics With folding & conveyor Adler sewing mc Max fabric width 240 cm, with foulding rods for fabric of 150 cm, Akab AK: 198 1870 sewing, 176 1871 fould, 187 1874 conveyor Turning mc for pillowcase : Supaturn SUP 3314 , Yoc 1999 Folding mc Duvet Covers : Jentex Type 5*5, Machnr 42-103, 2000, Max article size 315 x 375 , min 80 x 80 cm Table for fold mc Jomeks, yoc 2001 Folding for pillow cases : JULIEN yoc 1988 For pillow cases max 110 x 120 cm Julien CT/708, 1988 Hedpfx Asy Hvaashgot CT/707 Packing station for pillow cases Packing station for pillow cases, with conveyor belt - rollers - see pictures Packing station for duvet covers, with conveyor belt - rollers - see pictures MACHINEs WERE REFURBISHED - UPDATED , AFTER FEW YEARS PROFESSIONALLY PRESERVED MARKED, DISMANTLED, STORED ON MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately. Manual sewing machines : Juki lockstitch DLN-415-4 Yamato overlock AZ 8003-04 DF Yamato overlock YA AZ8003G-04DF/K2/SC10, yoc 2001 Global ylisyrjäys OV-704-050 lift wagon PV-12-3350

Condition: ready for operation (used), Year of construction: 1986, operating hours: 1,200 h, functionality: fully functional, total height: 1,520 mm, total length: 2,580 mm, total width: 1,440 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,500 rpm, feed length X-axis: 2,120 mm, feed length Y-axis: 250 mm, feed length Z-axis: 150 mm, type of input current: AC, grinding wheel diameter: 250 mm, overall weight: 3,730 kg, grinding length: 280 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 2,600 rpm, center height in crank: 115 mm, center height: 115 mm, collet bore: 55 mm, grinding spindle speed: 2,600 rpm, feed rate X-axis: 12 m/min, pivoting range: 45 °, travel distance X-axis: 2,120 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 150 mm, center width: 280 mm, grinding spindle motor power: 3,000 W, table length: 2,800 mm, table width: 250 mm, power: 6.5 kW (8.84 HP), height adjustment type: mechanical, workpiece diameter (max.): 235 mm, grinding diameter: 250 mm, input frequency: 50 Hz, disc diameter: 250 mm, input voltage: 380 V, space requirement width: 1,440 mm, space requirement length: 2,580 mm, space requirement height: 1,520 mm, grinding wheel speed: 2,100 rpm, distance table to spindle center: 362 mm, tool diameter: 235 mm, workpiece length between centers: 280 mm, distance between centers: 280 mm, Hob Sharpening Machine 33C (ZZS) 3A662 (Gear hobbing cutter grinding machine) Hsdpfex Nprbjx Ahgst The 33C (ZZS) model 3A662 is a specialized hob sharpening machine designed for precise sharpening and regrinding of gear hobs and gear cutting tools. Manufactured by 33C (Soviet Union), this machine is intended for industrial tool rooms and gear manufacturing facilities requiring reliable accuracy and repeatable grinding quality. The machine is suitable for sharpening hobs with a maximum diameter of 235 mm and a maximum length of 280 mm. It supports hobs with 4 to 30 flutes and allows grinding of straight and helical flutes with a helix angle range from 0° to 45°, covering a wide range of gear cutting applications. The grinding spindle is designed for grinding wheels with diameters from 200 to 250 mm. Spindle speed is adjusted via step pulleys and offers four speed stages: 1500 / 1900 / 2100 / 2600 rpm, ensuring flexibility for different tool sizes and materials. The machine is equipped with a dividing mechanism and supplied with a complete set of change gears, allowing accurate indexing during the sharpening process. A hydraulically driven table provides smooth longitudinal movement and stable grinding conditions. With overall dimensions of approximately 2580 × 1440 × 1520 mm and a machine weight of about 3730 kg, the 3A662 features a rigid and robust construction, providing excellent vibration damping and long-term operational stability. The machine operates on three-phase AC power (380 V / 50 Hz) and is supplied with original factory documentation. Key Features: *Specialized hob sharpening machine *Max. hob diameter: 235 mm *Max. hob length: 280 mm *Number of flutes: 4 – 30 *Helix angle range: 0° – 45° *Grinding wheel diameter: 200 – 250 mm *Grinding spindle speeds: 1500 / 1900 / 2100 / 2600 rpm *Hydraulically driven table *Dividing mechanism with full set of change gears *Rigid industrial construction (approx. 3730 kg) *Original technical passport and manual (Russian) Typical Applications: *Sharpening and regrinding of gear hobs *Maintenance of gear cutting tools *Tool room operations in gear manufacturing *Repair and refurbishment of worn hobs *Small- and medium-series gear production support

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel with a working pressure of 16 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Pressure Vessel Professional pressure-rated construction – made of high-quality 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 16 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 16 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. Standard Equipment Connection ports: 6 pcs. G1/2" – 2 pcs. G2" – 2 pcs. G1 1/4" – 2 pcs. Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Tank capacity 500 L Maximum allowable pressure PS 16 bar Test pressure PT 22.88 bar Hedpfxszwmlfo Ahgst Maximum allowable temperature TSmax 50°C Minimum allowable temperature TSmin -20°C Diameter 600 mm Height 2110 mm Weight 160 kg Connections 6 G1/2" connections 2 pcs. G2" connections 2 pcs. G1 1/4" connections 2 pcs.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, conveyor belt width: 520 mm, Technical specifications Product number: SK 9000 Year of manufacture: 2009 Machine dimensions: 900 x 1,740 x 1,700 mm (W x D x H) Belt width: 520 mm Hedpfjw H Tt Aex Ahgst Weight: approx. 220 kg Protection rating: IP 69 Performance: 12 tons/8h Very sharp shaft The machine can operate as part of a production line or the raised stand on which the machine is placed can be removed to work at the standard belt height of 900 mm from the ground. Fully dismountable for cleaning. Fully operational after service. The machine is equipped with a shaft with rubber wheels and a pneumatically inflatable shaft for products with a particularly challenging structure. No tools are required for disassembly and cleaning. More information and videos can be provided to interested parties via email. The device is in perfect condition, without any defects, following a major service. Complies with all European Union standards and safety requirements – CE certificate.

Condition: used, functionality: fully functional, The can seamer is the machine used for hermetically sealing the lid to the can body prior to sterilization. Depending on the product, sterilization can also be done before filling. Hedown Dmdopfx Ahgot The sealing of the can is achieved by deformation and subsequent overlapping by compression of the metal layers of the can body and the lid. The result is a kind of hook between the two that achieves its hermetic union and, consequently, the tightness of the container. This sealing requires a rubber (sealing gasket) inserted in the rim of the lid to achieve the most effective bonding of the metal layers. * Production may vary depending on the format and product to be closed. * Incorporates steam injection. Features FMC 652 Seamer: -Almospheric/Steam injection. -Geared rotary can seamer. -Integrated head. -Normal lid / Easy open lid. -Can feeding by straight infeed. -Cans diameter min/max: 52.4 - 108 mm. -Cans height min/max: 28-190 mm.

Condition: used, Year of construction: 1999, plate width 2980 mm Hedpfx Ahegxqvzegot plate depth 3000 mm plate height 1400 mm total power requirement 11 kW

Condition: used, Year of construction: 2010, functionality: fully functional, 3500 kVA (1750/1750 kVA) cast resin transformer, manufacturer SGB, year of manufacture 2010, primary side 20 kV, secondary side 2 x 690 V, Dy5d6. Hedpfxsza Ugqj Ahget

Condition: used, Year of construction: 1985, functionality: fully functional, 3150 kVA oil transformer, 20500V – 5 taps/6600V, with oil conservator, Buchholz relay, dial thermometer, Dyn5, year of manufacture 1985, make Asea Lepper, type DOHH Hjdew In Htopfx Ahgjt

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment • Hainbuch Hydraulic Vise for BZI32 Collet Hedpfx Ahsx U Tinjgot Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Extra Information • Machine still under power • Space requirement: 4200x2000mm (with the cooling unit) • Control: Millplus DV400

Condition: good (used), TGL: 28561/01 Table number: 14167 diameter: 315 mm footprint: 380 x 600 mm Height: 150 mm Accessories/equipment: graduation on table 360°, rotatable Condition: good weight: 75 kg dimensions: 600 x 600 x 320 mm dimensions with frame: 700 x 700 x 1.500 mm Hsdemikdhjpfx Ahgot

Condition: used, mileage: 45,000 km, power: 390 kW (530.25 HP), first registration: 03/2025, fuel type: diesel, overall weight: 18,000 kg, color: grey, gearing type: automatic, Equipment: soot filter, Vehicle number: 1424766004 1st owner, accident-free, full service history, non-smoker ---- Additional Features * We also offer financing, leasing, and rental options! * LA1 & LA2 7146 MOONSTONE GREY METALLIC * LZ2 FULL PAINT FINISH * C1W WHEELBASE 3700 MM * W9Z WEIGHT VARIANT 18.0 T (7.5/11.5) * M3E ENGINE OM471, R6, 12.8 L, 390 KW (530 HP), 2600 NM * M4X ENGINE VERSION EURO VI, E * M8B AIR INTAKE, BEHIND CAB, MOUNTED * M7K RADIATOR BLIND * M7T CONTROLLED WATER PUMP * M5V HIGH PERFORMANCE ENGINE BRAKE * M6M TWO-STAGE, CONSUMPTION-OPTIMIZED AIR COMPRESSOR * G5A SINGLE-PLATE CLUTCH * G2E TRANSMISSION G 281-12/14.93-1.0 * N6Z TRANSMISSION OIL COOLING * G5G MERCEDES POWERSHIFT 3 * G5L POWERSHIFT ADVANCED * G0K DRIVE PROGRAM ECONOMY/POWER * N2E NA MB 131-2C, PUMP * Z5M PTO, SINGLE * Z5S PTO PUMP, BELOW FRAME UPPER EDGE * A1Z FRONT AXLE, CRANKED DESIGN * A1D FRONT AXLE 8.0 T * A2E REAR AXLE, RING GEAR 440, HYPOID, 13.0 T * A3D REAR AXLE WITH ACTIVE LUBRICATION, NON-REGULATED * A5G AXLE RATIO I = 2.412 * A1A FRONT AXLE AIR SUSPENSION * J3Z AXLE LOAD MEASURING SYSTEM * R5E ALUMINIUM RIMS 11.75 X 22.5, FRONT, DURA-BRIGHT, ALCOA * R2Y ALUMINIUM RIMS 9.00 X 22.5, DURA-BRIGHT, ALCOA * R0L CUSTOMER-SPECIFIED TYRES FRONT * R0Z WHEEL NUT COVERS * S1Y TYRE PRESSURE MONITORING * A1 W48KBA 75 2 X 385/65 R 22.5 TL HIGHWAY RR STEERING? K? * A2 F38LCB 75 4 X 315/70 R 22.5 TL HIGHWAY RR DRIVE? L? * CZW STEP PLATE ABOVE FRAME, EXTENDED * C5P BOLTED FRAME * C0G REAR FRAME OVERHANG 1050 MM * C6G STEERING, SERVOTWIN * C6I POWER STEERING PUMP, CONTROLLED * C7T REAR INTEGRAL END * K0T MAIN TANK, LEFT * K1N TANK 570 L, LEFT, 650 X 700 X 1450 MM, ALUMINIUM * K3W ADBLUE TANK 75 L, LEFT * K5M LOCKABLE TANKS * K5S PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM * Z4O NARROW TANK CROSS-SECTION * Z4R HIGH TANK CROSS-SECTION * K8D EXHAUST SYSTEM, OUTLET RIGHT SIDE EXTERNALLY, HORIZONTAL * U2G EXHAUST BOX * C8B REAR AXLE MUDGUARD, 2550 MM VEHICLE WIDTH * C8H 3-PIECE MUDGUARD, WITH EC SPLASH PROTECTION * C8I SPLASH PROTECTION (EC), FRONT * C7F FRONT UNDER-RUN PROTECTION (ECE), ALUMINIUM * C8Y UNDERBODY PANELING, AERODYNAMIC * F7A BUMPER, CORNERS PLASTIC * F7C BUMPER, CENTRE PART WITH TOWING EYELETS * C8Z SIDE SKIRTS, AERODYNAMIC * Q4Z FIFTH WHEEL, LOW MAINTENANCE, GREASED LOCK * Q6J FIFTH WHEEL COMPACT, JOST JSK 40K * Q6G FIFTH WHEEL, WITHOUT MOUNTING PLATE * Q6Z FIFTH WHEEL ANGLE, WITH HOLE GRID * Q4L FIFTH WHEEL HEIGHT, H = 190 MM * H2C FIFTH WHEEL OFFSET +600 MM * Q0W FIFTH WHEEL FROM FACTORY * B2A DISC BRAKE, FRONT AND REAR AXLE * B1B ELECTRONIC BRAKING SYSTEM WITH ABS AND ASR * B1F HEATING, ELECTRONIC AIR SUPPLY UNIT * B1H ELECTRONIC AIR SUPPLY & CONTROL, MEDIUM * B4A CONDENSATE MONITORING FOR AIR SYSTEM * B4L COMPRESSED AIR TANKS, ALUMINIUM, COMPLETE * B5D TRAILER STABILITY ASSIST (TSA) * B5J BRAKE AND ELECTRICAL CONNECTIONS, LOW * B2X PARKING BRAKE, ELECTRONIC * B3K SECONDARY OIL RETARDER * F1J L-CAB GIGASPACE, 2.50 M, FLAT FLOOR * F1R L-CAB * F2A FLOOR VERSION, FLAT FLOOR * F2H CAB WIDTH 2.50 M * F2P CAB, 765 MM MOUNTING HEIGHT Hjdowflwljpfx Ahgjt * F2X GIGASPACE * F4H CAB REAR WALL, WITHOUT WINDOW * F3C CAB SUSPENSION, COMFORT, AIR SUSPENDED * F3W CAB TILTING DEVICE, MECHANICAL-HYDRAULIC * F6D TINTED WINDSCREEN WITH SUN STRIP * F8V LIGHT SENSOR * F8W RAIN SENSOR * D8M ELECTRIC SLIDING/TILTING SUNROOF, GLASS DESIGN * F4X EXTERNAL STORAGE BOX, LEFT * F4Y EXTERNAL STORAGE BOX,

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Hodpfx Ajwdny Tjhgjt Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: used, mileage: 350,920 km, power: 96 kW (130.52 HP), first registration: 06/2015, fuel type: diesel, overall weight: 3,300 kg, color: grey, gearing type: automatic, emission class: euro5, number of seats: 3, loading space length: 2,900 mm, loading space width: 1,900 mm, loading space height: 1,900 mm, Equipment: ABS, central locking, electronic stability program (ESP), had accident, soot filter, !!!!! ENGINE FAILURE !!!!! 3-seater, power steering, driver airbag, automatic transmission, tachometer, power steering, electric windows, onboard computer, electric exterior mirrors, center armrest, gull-wing doors, sliding side door/right, central locking + remote control, 3-pin power outlet, Carrier Xarios 350 refrigeration unit. Errors and prior sale excepted. For sale to commercial businesses and for export only. !!!! Fg-7146 !!!! Key number 156 !!!!! !!!!! Test drive/inspection drive at TÜV, DEKRA, or Fiat possible !!!!! Hedezp S Agepfx Ahgjt

Condition: used, Year of construction: 2001, functionality: fully functional, 1600 kVA Oil/Hermetic Transformer, Pauwels, year of manufacture 2001, 21kV/0.69, vector group Dyn5, HV plug-in bushings, LV porcelain bushings, Optional: pointer thermometer, full hermetic protection, rollers, connection flags. Hedpfoxwa S Eox Ahgot

Year of construction: 1962, condition: used, machine/vehicle number: 35701, height of centers: Werkstueck- bzw. Schleif-Ø 500 mm Hedpfx Ajz Hctshget distance between centers: ca. 2000 mm max. working piece weight: 1200 kg grinding wheel measures: 600 Ø x 300 mm grinding wheel rotations: 965 Upm electrical connection: 380 V, ca. 15 kW space needed: 2300 x 9000 x 2000 mm weight: 13000 kg

Condition: used, For sale: LK measuring table, granite Length: 3500 mm Width: 2100 mm Hodpfx Ahegbd Rtogot Thickness: 500 mm Weight: approx. 10,000 kg Includes: air bearings Price for the LK measuring table: €4,500 Delivery conditions: Delivery time: in stock, subject to availability Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for any discrepancies between the technical specifications in this offer and the actual machine, accessories, and parts. Machines, accessories, and parts are sold in their current condition, as known to the buyer. We cannot offer any warranty on used machines, accessories, and parts. The METAL UNION CONDITIONS, deposited with the Registry of the District Court of Rotterdam, as they read according to the latest version deposited there, apply to all our quotations, all orders placed with us, and all agreements concluded with us. The delivery conditions will be sent to you upon request. Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry, and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 b 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,206 h, functionality: fully functional, machine/vehicle number: 20170708, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 18,000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (with adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotational drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control: Heidenhain 530 Hedpfsy I Tvnox Ahgjt Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating Hours Control on-time: 20,248 h Machine on-time: 19,424 h Program run: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle chiller Kessler swing, 800 mm turning diameter, fully utilizable with zero-point clamping system Note: The touch probe is not included in the offer. The holders, however, are part of the offer.

Year of construction: 2003, operating hours: 4,689 h, condition: reconditioned (used), functionality: fully functional, 2023 comprehensively overhauled: - Spring assembly spindle renewed - Rotating union renewed - trackball renewed - Life support battery renewed - Graphic card regenerated - X-axis bearing new - backlash X-/Y-axis 0,015mm TECHNICAL DETAILS X travel: 1270 mm Y travel: 660 mm Z travel: 610 mm speed: max. 8.000 rpm table load: max. 1300 kg table size: 1500x660 mm tool changer: 24-fold/double arm tool holder: SK 40 DIN69871 Control: Ultimax 4 control MACHINE DETAILS spindle hours: 4.689 h, machine ran only 1 shift drive: 15 kW machine weight: approx. 9 t Hjdpfx Ahsl D Rubsgst space requirement: approx. 4,8 x 4,5 x 2,95 m EQUIPMENT - Coolant system - Cooling through the spindle (IKZ) 20bar - chip conveyor - machine light - 2x color screens (working) - Removable electronic handwheel SOFTWARE - Pocket milling with islands - Synchronous tapping without compensating chuck - DXF software - 3D contouring software - Ultinet - Advanced Velocity Control - Plunge Ramp/Helix

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 270-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 270 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 270-litre capacity – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 5 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. Hsdpfx Aszwl H Ijhget The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 270-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 92 kg Number of connections 5 Connection sizes 1 1/4", 2", 1/2" Dimensions 1825 × 500 mm Tank capacity 270 L Working pressure 11 bar Wall thickness 4 mm Diameter Ø 500 mm Height 1825 mm

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR Hsdpfx Ahomqkt Tsgst • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER Hedpfemqkubex Ahget • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 Hsdpfsmqkuujx Ahgjt tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: used, Year of construction: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with tap changer 19 steps, switching group YNyn0, with expander, Buchholz relay, dehumidifier, fan, dial thermometer, year of manufacture 1978 Hodpot Akl Hjfx Ahgst