Used Tec-Point Gmbh Motor Briggs & Stratton Crawler Dumper With Lifting Function for sale (101,779)

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A Lodpswf Rg Ssfx Anueac --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Laedpfxsytr Swe Anusc Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) Lsdoy Rmwdjpfx Anusac CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium Ledpfx Ansg Ewwrsusac -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors to the Mahr multisensor coordinate measuring machines currently in use worldwide. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Maximum workpiece weight: approx. 40 kg on the glass plate Accuracy: U1 = 1.9 + L/200 U2 = 2.4 + L/150 U3 = 2.9 + L/100 (L = measuring length in mm) Ledpfx Anog Ewk Rsuoac Increased accuracy available on request Traverse speed: 200 mm/s Acceleration: 400 mm/s Scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser - including high-precision USB camera with 2-stage zoom and telecentric beam path - including PTL01 TTL point laser, high-precision, telecentrically coupled - including Renishaw TP200 integrated tactile probe system, optionally expandable - including Quad-Light LED power ring light, programmable illumination - including LED power transmitted light - including Nikon precision objective 5x (optional 3x, 10x, 20x, 50x) C-mount Technology - including calibration standard with factory calibration certificate, consisting of a glass plate "circle", calibration sphere and gauge ring Transfer - state-of-the-art PT200 CNC controller system in a robust, industrial-grade control cabinet - PCI-BUS system for fast internal data transfer in real-time operation - pull-out controller rack 19" for optimal access in the event of service - modular controller concept open for later upgrades and retrofits - service-optimized controller design for quick access and service times - integrated 64-bit broadband bus technology with real-time data transfer - 4-channel online temperature compensation preparation "on board" - active safety technology for drives, light management and sensors - online remote connection for remote maintenance and online system check - LS circuit breakers for quick fault finding in the event of service - firmware adaptation for volumetric 3D full error compensation Including the powerful OptiCheck3D 5.0 software Commissioning, training and start-up support (programming) can be booked as a special package!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. Ljdpfx Aeng Exaenujac The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch Lsdendn Agepfx Anusac OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site Lasdponh R Eksfx Anujc - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification Lsdpfxonfvx Ne Anusac OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site Lasdpfjndk N Asx Anusc - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 1018, control type: PLC-controlled, degree of automation: manual, actuation type: electric, pipe diameter (max.): 50 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, warranty duration: 24 months, Equipment: CE marking, emergency stop, foot remote control, quick-change device, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: Laodpfonfvy Usx Anusc - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: Ljdeng Amkjpfx Anuoac - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles Lasdpfxeng A R Se Anujc OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. Laedpfxjnh R Suj Anujc POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. Ledpfxsng Ax Ss Anuoac The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: used, Year of construction: 2004, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: DRI 04320080, mileage: 100 km, overall weight: 7,000 kg, fuel type: diesel, color: blue, operation weight: 14,000 kg, maximum load weight: 15,000 kg, chain condition: 50 %, bar diameter (max.): 61 mm, pipe diameter (max.): 400 mm, Equipment: cabin, hammer hydraulics, rubber tracks, German horizontal directional drilling rig capable of drilling up to 200 meters in length, with a thrust/pull-back force of 15 tons plus impact (28 tons) with hydraulic hammer. Rubber tracks, max speed 3 km/h. Suitable for trenchless installation of pipes up to diameter 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, year 2004, 7,800 operating hours. Main components: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod containers, each with 48 drill rods x 3 meters = 144 rods (432 meters total) Control options: 1. Rod handling manipulator 2. Semi-automatic rod gripper and pulling system Lasdpfxsy H H Uuo Anujc Mixing system (8056D) with hydraulic station (TT-M2) DRI 8904.B, Deutz 4-cylinder diesel engine, bentonite pump P-72, two bentonite preparation tanks (each 4,000 liters), two BÖRGER rotary pumps for mixing Connection cable for mixing unit Bentonite hose reel 2 x drill heads Ø110 reamer, 5t swivel Ø280 reamer with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system New spare working components (adapter, shaft, sleeve) Price incl. VAT.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 40 / 670, functionality: unexamined, -KOM 853- Offered here is a Unifil air purifier from ILT Industrie-Luftfiltertechnik GmbH. This unit is in used condition and has not been tested for functionality. Manufacturer: ILT Industrie Luftfiltertechnik GmbH Model: U40 Serial No.: 40 / 670 Year of manufacture: 1988 Voltage: 80 V Current: 3.3 A Frequency: 50 Hz Ledsw Ehzyepfx Anueac

Condition: new, Eurotec Innovation TV25-M – Mobile Vibratory Finishing Machine / Trough Vibrator (Made in Germany) The TV25-M by Eurotec Innovation is a compact, mobile all-in-one solution for professional vibratory finishing – ideal for deburring, grinding, and polishing a wide variety of workpieces. Thanks to its well-designed system layout, all necessary components are integrated in a space-saving manner on a mobile frame. This makes the machine flexible to use and ready for immediate operation. Type: TV25-M TROUGH VIBRATOR Lodpfjhmp Dqex Anusac Manufacturer: Eurotec Innovation GmbH Gross volume: 50 liters Advantages: ✔ Mobile complete system – all components integrated on a movable frame ✔ Plug & Play – simply connect to 230V and start ✔ Integrated process water treatment (cascade system) ✔ Screening unit for automatic separation of workpieces and media ✔ Sound-insulated design for quiet operation ✔ Programmable control with timer & frequency adjustment The U-shaped trough design allows the processing of larger and longer workpieces while maintaining a compact footprint. ⚙️ Technical Data: Gross volume: approx. 50 liters Effective volume: approx. 36 liters Internal dimensions (working container): Length: 600 mm Width: approx. 275 mm Height: 325 mm Power supply: 230V Power consumption: approx. 0.5–1.0 kW 🏭 Applications: Deburring of metal and plastic parts Polishing and surface finishing Processing of individual parts up to small batch production Ideal for industry, workshops, and contract manufacturers Ideal for: Metal processing Deburring & polishing Workshops & production The TV25-M is the perfect solution for companies looking for a flexible, space-saving, and immediately ready-to-use vibratory finishing system – maximum efficiency with minimal space requirements. Additional variants and custom configurations available upon request. From development to production, we supply all products from a single source – all “Made in Germany”. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) Lodow Et Ilopfx Anusac - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2026, condition: new, functionality: fully functional, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm Lajdpfx Anjwkpvvjusc - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: Laodjxt Dmxopfx Anujc • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, We are offering this display machine SM Innotech Laminator Incapcell 35-18, year of manufacture 2018. Lasdpfx Anoy Druusuec Manufacturer: SM Innotech GmbH & Co.KG Model: Incapcell 35-18 Year of manufacture: 2018 Condition: Display machine Category ID: 33 Machine type: Laminator There are 2 units of this system available; both are new as they have never been used. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2019, condition: used, We are offering this used SM Innotech GmbH & Co.KG Incapcell 22-18 laminator, year of manufacture 2019. The system has very low operating hours, as it was used as a test machine for trial purposes. Individual software updates or other modifications can be provided according to requirements and at additional cost. The system is available for immediate delivery. If you have any questions or need further information, please feel free to send us a message or give us a call. Lodjy Dq D Ijpfx Anusac

Year of construction: 2022, condition: ready for operation (used), A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible. Lajdpfx Aney Ax Ufeuec

Condition: used, Year of construction: 1992, functionality: limited functionality, Paint booth as shown in the pictures for sale, including crane runway as visible in the images. If dismantled by the buyer, price is negotiable. Lajdpfxsy Aldaj Anuoc