Used Svetruck 1260 for sale (285)

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm Lhsdpfxju N A Uus Ab Aon ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,935 h, fuel type: electric, Type of forklift Reach truck Product code 11389 Manufacturer TOYOTA Model RRE140H Lhsdpfsz S Hv Eex Ab Asn Year 2021 Lifting capacity, kg 1400 Mast type Triple Lifting height, mm 5700 Operating hours 4935 Country Sweden Weight (kg) 3795 Length x width x height, mm 1720 x 1260 x 2460 Overall height, mm 2460 Forklift attachments Side shift, Fork positioner, Battery charger, Automatic fork extension

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 16P10302-015, SPECIFICATION Swing over bed 400mm Swing over the cross-slide 216mm Distance between centres 760mm Cross slide travel 216mm Spindle bore 54mm Spindle nose D1-6 camlock Spindle taper MT4 in bush Spindle rpm 150-2500rpm Spindle motor 5.57kW Tailstock travel 127mm Lhedpfx Abjz Snlvj Aon Tailstock taper MT4 Footprint L x D x H 2090 x 1260 x 1800mm Approximate weight 1580Kg MACHINE EQUIPPED WITH: - Prototrak SLX control TRAKing 3 Jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting Manual

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Ljdpfx Aezz Iq Rsb Ajhn

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00676, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2016.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard! Lsdpfj Aaxqvex Ab Ashn   Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Year of Manufacture Robot: 2016.05 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1260   Controller: IRC5 Year of Manufacture Cabinet: 2016.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00698, load capacity: 155 kg, arm reach: 2,850 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Never-used ABB IRB 6700-155/2.85 manufactured in 2017.02. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Lhodjz U Nbiepfx Ab Aon Brand: ABB Model: IRB 6700-155/2.85 Model Number: IRB Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 155 Reach (mm): 2850 Repeatability (mm): ± 0.01 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1260   Controller: IRC5 Year of Manufacture Cabinet: 2017.02 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor Lsdpji I Hdcefx Ab Ashn -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Condition: used, Year of construction: 2017, Behringer LPS 60-T – Vertical metal band saw - Servo feed with cutting pressure control - Robust cast iron band guide - Fast band change - Operating hours of the saw drive: 32441 h - Year of manufacture: 2017 Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (incl. base pan) - Cutting speed: 10 - 110 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tension pressure: 85 bar - Coolant quantity: approx. 100 l - Motor power – Saw drive: 5.5 kW - Motor power – Hydraulic pump: 2.2 kW - Motor power – Coolant pump: 0.15 kW - Motor power – Chip conveyor: approx. 0.26 kW - Connection value: approx. 10.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) Lhedjz H Ac Ajpfx Ab Asn - Current consumption: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 99 h, stroke length: 265 mm, throat depth: 410 mm, operating speed: 145 mm/s, reverse speed: 210 mm/s, table height: 890 mm, overall weight: 7,600 kg, total length: 4,320 mm, total width: 1,795 mm, total height: 2,630 mm, input voltage: 380 V, pressing force: 100 t, clearance between the columns: 2,600 mm, table width: 3,100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, Demo Delivery time - in stock price 41000 EUR Pressing force 100 tons Bending length 3100 mm 4 axis (Y1,Y2, X, R) motorsed crowing Stroke 265 mm Distance between walls 2600 mm Throat depth 410 mm Hydraulic drive Lowering speed 210 mm/s Rotational speed 145 mm/s Rear bumper travel in the X axis 750 mm Rear bumper travel R axis 250 mm Table height 890 mm Engine power 7.5 kW Length 4320 mm Width 1795 mm Height 2630 mm Weight 7600 kg STANDARD EQUIPMENT: Hydraulic drive 4 axes (Y1, Y2, X , Z and R) CYBELEC 12 colorful graphic controls - 17" color touch screen - 3D imaging in simulation and production - Suitable for full Windows applications - USB interface and peripheral interface - Support for user-specific applications Rear bumper driven by a servo motor on linear guides and ball screws CNC controlled crowning Top tool EUROSTAMP 1260, H:67, 85° R:08 (set 835mm x length) EUROSTAMP 2067 lower tool, 4 slots V=16-22-35-50mm, 85° H:60 (set 835mm x length) Fiessler AKASam laser safety device mounted on the upper beam Arms supporting the sheet on the linear guide Front and rear laser security system Equipment compliant with CE regulations User manual in POLISH, GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - higher productivity compared to classic hydraulic presses -low energy consumption - compact drive spindle assembly with few individual components Ledpfef Eytlox Ab Aohn Available immediately from stock.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Lhodpfxjx Hibdj Ab Aen Platen size: 650 × 652 mm Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Injection weight (PS): Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Machine weight: 4500 kg.

Year of construction: 2000, condition: excellent (used), As-new lock copy milling machine for PVC and aluminium profiles from a training workshop Key features: - 3-sided machining of sash and frame profile bars in a single clamping, e.g. for profile cylinders, handle holes, and lock cases - Equipped with 4 tracing pins for flexible and simple use of the template system - Convenient insertion of the profile bar without interfering milling units - Manual profile bar rotation device for 3-sided machining - Optimum machining quality due to the design-based use of short tools Max. workpiece cross-section (W x H): 200 x 100 mm Milling area (L x W): 315 x 130 mm Plunge depth: 200 mm Speed: 12,000 rpm Drive power: 1.5 kW at 400 V Machine dimensions (L x W x H): 1260 x 820 x 1650 mm Machine weight: 340 kg Lhsdpfeyrh Ncox Ab Ajn Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, machine/vehicle number: 26626, Year of construction: 2017, operating hours: 6,166 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,160 mm, Equipment: sideshift, .: 26626 Device details: Year of manufacture: 2017 Load capacity: 2500 kg Lifting height: 4900 mm Recorded operating hours: 6166 h Free lift: 1300 mm Mast type: Triplex Mast height: 2140 mm Lhjdpfjzik Hwjx Ab Asn Length/Width/Height: 2720 / 1170 / 2160 mm Operating weight: 4520 kg ---- Equipment: * Overhead guard * 3rd valve * 4th valve * Partial cabin * Full free lift * Front work light * Rear work light ----- Attachments: * Side shifter * Fork positioner ---- Additional device information: Bluespot Flashing beacon Single-pedal control With attachment, 1260 kg load capacity ---- The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments and sweepers immediately available for you. Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English Subject to prior sale and errors for this offer. In the dealership, the device is sold in its AS IS condition, without any refurbishment. All information is without guarantee, subject to errors and changes.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Lhjdpfxew T Tcwj Ab Ajn Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: used, Year of construction: 1974, Manufacturer: Grenier - Charvet Model: E 35 Year: 1974 ( Compliance file dated 2001) Lhedpfx Abjx R A Acj Aen Type : High viscosity paste mixer   Motor power : 35 CV - 25 KW Speed variation: mechanical Previous use : Paint tank 1160 L and 440 L Agitation tool: Ø 1260 mm butterfly/clover type (Ø 950 mm possible) Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2770 mm Height in high position: 4070 mm Stroke: 1300 mm   Technical file available

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00669, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2014.07. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Lodpfx Ao Aaxu Uob Ashn Model: IRB 6700-150/3.20 Model Number: IRB Year of Manufacture Robot: 2014.07 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1260   Controller: IRC5 Year of Manufacture Cabinet: 2014.09 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, Year of construction: 2011, Printing Specifications Printing process: Flexographic Number of colors: 8 Maximum material width: 1280 mm Maximum print width: 1200 mm Minimum repeat length: 380 mm Maximum repeat length: 840 mm Maximum machine speed: 300 m/min Equipment Drive system: Fully automatic, gearless Ledpjzk Hw Usfx Ab Aohn Ink pump system: Phonematic with AutoWash Web guiding / Camera system: FIFE Anilox Rollers Quantity: 8 Face length: 1260 mm Engraving length: 1240 mm Outside diameter (OD): 171.88 mm Inside diameter (ID): 149.722 mm Printing Sleeves Quantity: 8 Inside diameter (ID): 114.708 mm Face length: 1210 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 46,424 h, clamping force: 3,500 kN, screw diameter: 80 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details. Lodpfoy S Tvvjx Ab Ashn • PP injection capacity: 640 g • Minimum mould dimensions: 380 mm • Tie bar spacing: 710 × 710 mm • Maximum mould opening: 1260 mm

Condition: used, Year of construction: 2008, Used machine Year of construction: 2008 Edge thickness PVC: 0.4 - 2.0 mm Panel thickness: 10-45 mm Lodpfoxppwbsx Ab Ashn Edge banding from roll automatic cross-cutting unit Flush trimming unit for flush and radius milling, r = 2 mm Motor 0.37 kW - 9000 rpm Extraction connection: 2 x 60 mm Heating capacity approx. 1150 W Total power 2 kW Weight approx. 240 kg Dimensions 2040 x 1240 x 1260 mm Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned Ledpfsy Anp Esx Ab Ashn and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Flywheel diameter - 1300 mm Year - 2011

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6 Lhodsx N Iclepfx Ab Aen

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile Ledpfx Ajw H Rzxob Ashn – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Lsdjykr Aqjpfx Ab Aehn Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: good (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: CA90H2 PIPE BENDING ROLL, shaft diameter: 90 mm, roller diameter: 260 mm, rotational speed (min.): 8 rpm, rotational speed (max.): 8 rpm, overall weight: 1,000 kg, total length: 1,260 mm, total width: 1,000 mm, total height: 1,260 mm, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, operating speed: 8 mm/s, roll diameter: 260 mm, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHATS OUTPUT SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 - 78 – 90 – 116- CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE CONTROLS CENTRALIZED DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT Lhedpfx Abowkrr To Asn SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTON MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL/HORIZONTAL. SAFETY AND EMERGENCY STOP EQUIPMENT INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS IN ORIGINAL ALONG WITH THE MACHINE WEIGHT 1000 KG DIMENSION 1260 X 1000 X H 1260 MM

Condition: ready for operation (used), Year of construction: 2023, operating hours: 6 h, travel distance X-axis: 2,465 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 378 mm, number of axes: 5, This 5-axis BIESSE ROVER PLAST A FT 1224 was manufactured in 2023. It features a working area of 2465 mm x 1260 mm and a Z-axis stroke of 378 mm. The machine is equipped with a powerful 13 kW machining unit capable of up to 20,000 RPM. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE ROVER PLAST A FT 1224 machine we have for sale. Contact us for further details. Lhodez H Rk Ujpfx Ab Ajn • Working Area / Table Dimensions: X = 2465 mm, Y = 1260 mm• Z-Axis Stroke: 378 mm• Maximum Axis Speed: X = 85 m/min, Y = 60 m/min, Z = 20 m/min• Maximum Piece Passage in Z: 200 mm (170 mm with Sweeper Arm)• Worktable Type: FT PLUS phenolic layer table with 30 mm grid layout, 12 mm MDF matrix plate• Vacuum System: Multi-zone vacuum system (4 independent zones)• Vacuum Pump: 1x 250 m³/h cam vacuum pump (dry running, maintenance free)• Machining Unit: 5-interpolating axes machining unit, 13 kW (17.4 HP) S6 / 11 kW S1, HSK F63 adapter, liquid-cooled, up to 20,000 RPM• Axis Angles: C-axis 360° continuous rotation, B-axis +/- 150°• Coolant Unit: Liquid cooling system (absorbs 1600 W) for electrospindle• Tool Tool Changer / Magazines:• 13/16-position linear side tool changer mounted on machine bed• 8-position revolving tool changer mounted on X-carriage• Measuring Systems: Digital tool length presetter (for diameters up to 130 mm)• Software: BH660 PC-based control with WRT (Windows Real Time), bSolid (3D CAD/CAM), bSolid 3-Axis & 5-Axis machining modules, bNest (Nesting module), bSolid File Import Module• Additional Features:• LED light strip for work area illumination & L-shaped LED projector for vacuum pod positioning• Ionizer for static charge reduction on plastics• Tool lubrication system (air-oil mist) for non-ferrous material processing• Wired remote control pad• Uniclamp adapters (4x) and Uniclamp clamping devices (4x, H=74mm)• Vacuum modules: 6x (132x146 H74mm), 4x (132x75 H74mm), 4x (132x54 H74mm)• Air cushion blower for easy loading/unloading• Barcode scanner (1D wireless)• UPS backup for machine PC (7-10 min power backup)• Power Supply: 400 V / 50 Hz, 3-phase (without neutral conductor), voltage tolerance +/-10%Safety Standard: CE / UKCA with Full Bumper safety system and protective enclosure

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm Lhjdpfx Abszugz Ue Ajn • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Raw mother-board width before longitudinal ripping: 900–1260 mm • Panels are longitudinally divided prior to digital printing and coating operations • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: • Longitudinal ripping system with up to 5 saw cuts plus 2 trimming units for production of finished plank widths from 160–510 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet • Stacking system (outfeed): • Type: drop shaft • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) / Alternative stacking configuration maximum stack weight: 3500 kg • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)