Used Stabau Hydraulic Scoops for sale (14,548)

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Cjdpfxey Ixims Akcegt Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Cedpfoy Iwryox Akcegt Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Cedpfx Asy Iwrajkcegt Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Cgedpfx Asy Iwqvskcot Machine weight approx.: 16 t

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Cgsdoyizxropfx Akcst Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Cgodpfx Aovvkmbjkcet

Condition: new, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save -24% compared to the RRP! TIGERMETAL WH150 – Hydraulic Workshop Press 150 Tons | Electric + Manual Pump The TIGERMETAL WH150 workshop press is a powerful industrial press designed for the most demanding applications in workshops, production, and maintenance. With a pressing force of 150 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations in professional environments. Thanks to the combination of electric drive and manual hand pump, the press allows both fast operation and highly sensitive, precise pressure control – especially for delicate workpieces. 🔧 Technical Data: Model: WH150 Manufacturer: TIGERMETAL Pressing force: 150 tons Drive: Electric motor + manual pump Motor power: approx. 4 kW Connection: 400V – 16A – 50 Hz Codpfx Akjf Sqckjcegt Max. working pressure: approx. 310 bar Stroke: approx. 400 mm Working width: approx. 1200 mm Max. working height: approx. 1000 mm Weight: approx. 1080 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The WH150 is the ideal solution for anyone looking to combine maximum pressing power with the highest level of precision, flexibility, and industrial reliability. The laterally movable cylinder and height-adjustable working table ensure maximum flexibility and optimal adaptation to a wide variety of workpieces. The massive steel construction guarantees maximum stability, safety, and a long service life – even under intensive industrial use. Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. A wide range of additional workshop presses in various designs, sizes, and with optional equipment is available! Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. A demonstration machine can be tested on-site under power. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! Cgedpfx Ajf Sqcyokcst ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: good (used), mileage: 710,881 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: AdBlue, central locking, cruise control, electric window regulation, onboard computer, soot filter, spoiler, = Additional Options and Equipment = - High beam - Windscreen - Cabin - Tipping hydraulics - Particulate filter - Sleeper cab - Sun visor - PTO (Power Take-Off) Cgjdsy Irf Iopfx Akcjt = Notes = Volvo FH13.500 Low roof 6x2 - PTO/Hydraulic - Steel/air suspension - VEB+ MY: 24-4-2019 KM: 710,881 YV2RT40C5KA845798 VEB+ Steel/air suspension Hydraulics I-Shift Euro 6 = Further Information = Technical information Number of cylinders: 6 Transmission Transmission: I-Shift, 12 speeds, automatic Axle configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steering axle; Tire tread left: 40%; Tire tread right: 40%; Suspension: leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tyres; Max. axle load: 11,500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Suspension: air suspension Rear axle 2: Tire size: 385/65R22.5; Lift axle; Max. axle load: 7,500 kg; Tire tread left: 50%; Tire tread right: 50%; Suspension: air suspension Weights Unladen weight: 9,385 kg Payload: 17,615 kg Gross vehicle weight: 27,000 kg Condition Technical condition: good Visual condition: good

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Cgjdpfsy E T A Ajx Akcot Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: used, mileage: 1,454,613 km, power: 456 kW (619.99 HP), first registration: 11/2012, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: other, total length: 5,900 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, retarder, spoiler, = Additional options and equipment = - Aluminium fuel tank - Brake booster Cgedpfxey Iqhhs Akcot - Roof spoiler - High beam headlights - Tipper hydraulics - Air conditioning - PTO - Radio/CD player - Sleeper cab - Sun visor = Additional information = Brakes: Disc brakes Front axle: Tyre size: 385/65 R22.5; Steering; Suspension: Parabolic spring Rear axle: Tyre size: 315/80 R22.5; Twin tyres; Suspension: Air suspension Unladen weight: 8,365 kg

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Cgedpfx Aoy E Twaskcot Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg

Condition: excellent (used), mileage: 980,023 km, power: 338 kW (459.55 HP), first registration: 10/2014, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 5,900 mm, total width: 2,550 mm, total height: 5,600 mm, Year of construction: 2014, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, = Additional options and accessories = - Tipping hydraulics - PTO - Radio/CD player - Sleeper cab - Sun visor - Automatic heater = Notes = TRANSPORT TO ANTWERP 390 EURO = Further information = Tyre size: 315/80 R22.5 Front axle: Steered Rear axle: Twin tyres Unladen weight: 7,593 kg Technical condition: very good Cgjdpfx Ajy Iqdpjkcot Visual condition: very good Reference number: 20

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH TRAVERSING CYLINDER Capacity: 150 tons. Automatic dual-speed operation with fast mode. Special electrical panel with quick/slow changeover switch for one-handed operation. Traversing cylinder stroke: 816 mm. Internal clearance (side to side): 1,500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVABLE PISTON – NEW ITEM, CE MARKED. — AUTOMATIC DUAL-SPEED OPERATION WITH FAST MODE. — COMPLETE WITH SPECIAL ELECTRICAL PANEL WITH QUICK/SLOW SWITCH FOR ONE-HANDED OPERATION. Cgodpfx Akjlruhdocjt — TECHNICAL DATA SHEET ATTACHED. - Rated force: 150 tons - Cylinder stroke: 300 mm - Internal clearance: 1,504 mm - Approach speed (fast): 1,450 mm/min - Working speed (slow): 105 mm/min - Ram stroke: 300 mm - Ram diameter: 110 mm - Stem diameter: M30 - Tank capacity: 50 liters - Max pressure: 350 bar - Voltage: 400 V, Frequency: 50–60 Hz - Motor power: 3 kW - Max current draw: 7.3 A - Weight: 1,500 kg Equipped with GALTECH distributors: • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps: one for rapid approach and return (set at 20 bar), and one with adjustable pressure via handwheel to set desired force. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard gauge to display delivered force. • INTECH electrical panel, certified according to current standards and supplied with independent CE marking.

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc. Cgjdpfjy E Ey Tox Akcjt

Condition: good (used), IDEAL EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: 99 programs, each with 99 steps Data entry via LCD touchscreen Cgedey E Ex Nepfx Akcst Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Switching mm/inch Hydraulic knife and pressure beam drive Photocells Side tables Cutting line Technical data: Cutting length: 550 mm Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm

Condition: used, LVD Shear Type HST C-10/31 Cedpfjx Tqtbox Akcegt Capacity 3000 x 10

Condition: used, functionality: fully functional, Guillotine Shear Brand: SAGITA Capacity: 4000 x 8 mm Backgauge capacity: 1100 mm Dimensions: 4750 x 2250 x 1850 mm Cgjdpfx Akjynglnocot Weight: 12 t Blade gap adjustment ELGO backgauge Rear sheet support

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 886.24 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg Csdpfx Akewiry Ijcogt 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch

Condition: used, axle configuration: 3 axles, first registration: 11/2016, total length: 12,750 mm, total width: 2,540 mm, total height: 3,650 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 6,460 mm, color: red, Year of construction: 2016, Equipment: ABS, 1 x self-tracking axle / trailing steering axle. Hydraulic ramps. Loading bed: 860 cm Loading height: 90 cm Coupling height: 130 cm Csdpfx Ajy Igkrokcjgt = Additional Information = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Rear axle 2: Twin tyres; Tyre tread left inner: 35%; Tyre tread left outer: 35%; Tyre tread right inner: 35%; Tyre tread right outer: 35% Rear axle 3: Twin tyres; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Weights Unladen weight: 9,190 kg Payload: 38,810 kg Gross vehicle weight: 48,000 kg Identification Model number: F-S43-1A1Y / HYDRAULIC RAMP = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po russki. We make every effort to provide correct information, but no rights may be derived from the listings.

Condition: used, Year of construction: 2000, total length: 1,000 mm, total width: 1,900 mm, total height: 2,000 mm, Colour: Grey Empty weight: 3.000 kg - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 205570 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 160 - Max. stroke [mm]: 100 - Table length [mm]: 420 - Table width [mm]: 410 - Table bore diameter [mm]: 60 - Ram length [mm]: 120 - Ram width [mm]: 120 - Transport dimensions: 1000mm x 1900mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Cjdjy Ew Euspfx Akcjgt Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), mileage: 285,801 km, power: 460 kW (625.43 HP), first registration: 08/2019, fuel type: diesel, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 5,990 mm, total width: 2,540 mm, total height: 3,750 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, differential lock, electric window regulation, fog lights, fridge, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Differential lock - High beam headlights Cjdpfsy Ifc Hjx Akcogt - Low noise emission - Enclosed cab - Speed limiter - Tipping hydraulics - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Sun visor - Toolbox - Power take-off (PTO) = Further Information = Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 7,871 kg Payload: 10,129 kg Gross vehicle weight: 18,000 kg Technical condition: very good Visual condition: very good VOLVO FH 480 4x2 tractor unit with full equipment EURO 6L package, 480 HP Drive: 4x2 Wheelbase: 380 cm Globetrotter cab with full equipment: leather, air conditioning, navigation, refrigerator, 220V inverter Complete spoiler kit 1x large fuel tank Special interior features Hydraulic tipping body The tractor unit has an original 285,802 kilometers and is in top condition! We speak German Hablamos Español We SPEAK ENGLISH

Condition: refurbished (used), Year of construction: 1995, machine/vehicle number: 4290, functionality: fully functional, pressing force: 30 t, stroke length: 300 mm, table width: 440 mm, table length: 320 mm, total height: 2,750 mm, installation height: 500 mm, overhauled Schoen double column press year 1997/2024 Pressing force 300 kN Installation height 500 mm Cgjdpfxeu Hyx Se Akcet stroke: 300 mm Table: W x D 440 x 320 mm Machine will be overhauled: - new control - new light barrier - revision of the hydraulics

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics Codpfx Aovw Spmokcogt

Condition: used, mileage: 1,500,885 km, power: 338 kW (459.55 HP), first registration: 11/2008, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, total length: 6,200 mm, total width: 2,500 mm, total height: 3,700 mm, Year of construction: 2008, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fridge, power assisted steering, retarder, second fuel tank, spoiler, = Additional options and accessories = - Aluminum fuel tank - Roof spoiler - Tipper hydraulics - Radio/CD player - Sleeper cab Cgsdpfx Aoy Icl Ejkcjt - Sun visor - Immobilizer = Further information = Front axle: Tire size: 385/65 R22.5; Steering; Suspension: parabolic suspension Rear axle: Tire size: 315/70 R22.5; Twin tires; Suspension: air suspension Unladen weight: 7,930 kg Reference number: 24