Used Smeral Eccentric Press for sale (12,510)

Condition: used, Year of construction: 1997, KP03 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1997 Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Iodpjzxq N Dofx Ahyjih Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco used

Condition: used, Year of construction: 1980, Technical details: Iisdpfxou N A Uue Ahyeh pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible. Iisdpfx Ahjzvy Haeyoh

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T100 CNR4 Year of manufacture: 2002 Nominal force: 1000 kN Weight: 7,000 kg Strokes per minute: 65 Maximum insertions per minute: 22 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.195 s Safety distance: 312 mm Energy: 8493 KJ Adjustable stroke min./max.: 10–130 mm Ram adjustment: 100 mm P.M.I high adjustment: 370 mm Maximum extraction stroke: 55 mm Worktable surface: 950x660x68 mm Ram plate dimensions: 540x450 mm Shank diameter: 60 mm Projection from center: 330 mm Max. die size: 540x450 mm Upper die weight: 180 kg Voltage: 400 V Hydraulic overload Complete with user manual and CE declaration of conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor • Flywheel bearings • Rotary joint bearings • Countershaft bearings • Clutch plates • Clutch pins and flanges • Clutch seals • Hydraulic overload seal Iiodpfx Ahsy D R N Rsyoh • Hydraulic overload hose • Oil pump guide pressure gauge • Oil pump guide float • Hydraulic overload pump • Air pressure switch • Front and side safety guards with safety interlock keys • Worktable surface reconditioned on CNC machine • Foot pedal control • Electrical panel with remote assistance

Condition: good (used), Year of construction: 1977, 1 used eccentric press Make: Helmerding Model: EL 35 B Year of manufacture: 1977 Machine no.: 5182 Pressing force: 350 kN Adjustable stroke: 12 - 80 mm Adjustable slide: 70 mm Slide strokes per minute: 110 Adjustable table: 150 mm Safety distance: 150 mm Overrun: 50 mm Iijdpfx Ahowxxr Aeyeh Weight: 2050 kg Equipped with press safety valve

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm ram adjustment 80 mm Iiedez N Hu Nopfx Ahysh table surface area 750 x 640 mm ram surface 500 x 200 mm hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Condition: new, Year of construction: 2026, neu 2026 070223 prompt, Zwischenverkauf v Türkei 25700 € 490.87 € 1 15 to 1.4 mm 320 mm Iedjwirldspfx Ahyoih 490 mm 130 mm 1 - 40 mm 200 1/min 4 40 mm 30 mm 210 mm 215 mm 1.5 kW 1160 mm 1180 mm 1730 mm 922 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm Iedpfxju Nfhdo Ahyeih total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: excellent (used), Eccentric press Inventory no. 3341 Manufacturer: Ter Hart Type: EP 13 * Pressing force: 13 tons * Stroke adjustment: 5 - 50 mm * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 200 mm * Overhang: 115 mm Ijdezi Erhepfx Ahysih * Foot/hand operation (guard) * Protective guard (hand) * Weight: 520 kg

Condition: used, Year of construction: 2021, Used metal stamping press ALP-25J (25T, 2021) for sale. Condition: used, good condition. Can be tested. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 Compact and reliable mechanical eccentric stamping press designed for forming, cutting, blanking, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 65 mm Stroke frequency: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Slider working area: 560 × 370 mm Table (bolster) area: 250 × 220 mm Country of origin: China Weight: 800 kg Application: The ALP-25J press is suitable for: stamping, cutting, bending, and forming metal parts; small pressing operations in the production of tools, metal structures, and automotive parts; Ijdpfx Ajzktuajhyjih working with thin and medium-thickness sheet metal. If you have any further questions, please do not hesitate to ask.

Year of construction: 1971, condition: good (used), Pressing force: 63 t Isdjh N S Sdepfx Ahyeih Table: 660 x 480 mm Slider: 450 x 280 mm Overhang: 250 mm Slider stroke: 16 to 125 mm Sheet thickness, continuous stroke: 3.2 mm Max. distance between table and slider: 417 mm Die opening: 280 x 250 mm Slider adjustment downwards: 70 mm Stroke rate: 80/min Power consumption: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1,500 x 1,600 x 2,700 mm

Condition: good (used), Year of construction: 1998, power: 3 kW (4.08 HP), pressing force: 50 t, table width: 800 mm, table length: 500 mm, table height: 830 mm, throat depth: 250 mm, total length: 1,300 mm, total width: 1,100 mm, total height: 2,400 mm, overall weight: 4,100 kg, compressed air connection: 6 bar, drop-through hole in table: 170 mm, installation height: 450 mm, ram adjustment: 180 mm, stroke adjustment: 102 mm, Eccentric press, pressing force 50 t, table size 800 x 500 mm, throat depth 250 mm, adjustable stroke 8 - 110 mm, 60 strokes/min, ram adjustment 180 mm, motor 3 kW, dimensions 1100x1300x2400 mm, weight approx. 4100 kg Iiedpfx Ahsyly Eveyjh

Condition: used, Year of construction: 1990, ECCENTRIC PRESS Iodpfx Ahsx N Sr Dsyoih GIZELIS 150t PRESSURE 150t TABLE DIMENSIONS 1000x660 mm STROKE 120-220 mm POWER 11 kW WITH HYDRAULIC CLAMPING SYSTEM

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Isdpeyiflmefx Ahysih

Condition: used, Technical details: Iiedpfeu Nflijx Ahyeh pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine approx.LxWxH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 25 t, table width: 360 mm, table length: 560 mm, throat depth: 180 mm, total length: 1,680 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 1,750 kg, ram adjustment: 60 mm, Projection 180 mm Iodpfx Ahot Sgrujyjih Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Fold-through hole in table 150 x 100 mm Table adjustment 150 mm Ram stroke 12-80 mm

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm Isdpfxeyk D Dte Ahyoih SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Condition: used, Year of construction: 1990, ECCENTRIC PRESS GIZELIS 200t PRESSURE 200t TABLE DIMENSIONS 1000x660 mm STROKE 17-230 mm POWER 11 kW WITH HYDRAULIC CLAMPING SYSTEM Iodox N Sqyopfx Ahyjih

Condition: good (used), functionality: fully functional, Offered is a knee lever press/foot press including a set of calibration tools. The machine was used in the manufacture of wedding rings. The calibration tools have European ring sizes from 82-39. The press and the tools are used, but in fairly good condition. The press weighs approx. 150 kg. Ijdpevy Dutjfx Ahyoih

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t Iedpfehqqnzjx Ahyoih DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm stroke - stepless adjustable 30-140 mm Iodoztfz Rjpfx Ahysih ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 28800 € 550.08 € 20 to 1.7 mm 360 mm Iisdpfxowiry Uj Ahyjh 550 mm 140 mm 1 - 50 mm 160 1/min 4 40 mm 35 mm 200 mm 240 mm 2.2 kW 1360 mm 1100 mm 1860 mm 1250 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations OPTION: Vibration pads € 132,--

Condition: used, pressure:70 t throat:250 mm stroke:10 - 120 mm Iijdpfx Aocxxttshyeh table-size:750 x 500 mm dayligth:350 mm ram adjustment:350 x 200 mm no. of strokes:50 Hub/min daylight:310 x 370 mm total power requirement:5 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:1,3 x 1,4 x 2,5 m tilting eccentric press, tie-rod design with UVV movable protective screen, pneumatic clutch, quadruple led tappet, separate electric cabinet, central lubrication, electric two-hand operation, emergency cut-off

Condition: good (used), Year of construction: 2002, functionality: fully functional, power: 12 kW (16.32 HP), pressing force: 120 t, table width: 610 mm, table length: 850 mm, total length: 19,000 mm, total width: 19,000 mm, overall weight: 8,500 kg, installation height: 300 mm, to visit under power Isdpjrwlxtefx Ahysih

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Iiodjy Erzdopfx Ahysh Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes