Used Skf Central Lubrication for sale (11,587)

Condition: used, KUKA ZH 210 / 240 Central hand robot arm Dsdsvgwrfspfx Albecl 00106447

Condition: as good as new (ex-display), PRICE ON REQUEST! - Like new - Completely measured - Gear play: Axis 4 - 0.01 WM Axis 5 - 0.015 WM Axis 6 - 0.01 WM - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional charge MORE THAN 100 CENTRAL HANDS IMMEDIATELY AVAILABLE in stock, various models. Just ask! Express overhaul of your KUKA central hand is also possible – 48-72 hours from delivery. In addition, we also offer repair of ABB wrists. Dcedpfxog A Iucs Albel

Condition: refurbished (used), PRICE AVAILABLE UPON REQUEST! - used & tested completely refurbished, all wear parts replaced - completely measured - gear play: Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - central hand newly adjusted Dodpfeg A Iuyjx Albocl - endurance test for 8 hours at 100% load - delivery in a special box (insured shipping) - central hand available for exchange (without exchange available upon request) - gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional charge WE HAVE MORE THAN 100 CENTRAL HANDS IN STOCK IMMEDIATELY, various models. Just ask! Express overhaul of your KUKA central hand is also possible - 48-72 hours after delivery. In addition, we also offer the repair of ABB wrists.

Condition: used, Rotary vane vacuum pump Manufacturer: Leybold Type: SV 630 B and BF Cat. No.: 960863 & 960867 Voltage: 50/60Hz 400V Ultimate pressure: 0.8 hPa (mbar) Condition: General overhaul Dsdpfjdf Il Dsx Albocl Warranty: 12 months Includes: Motor relagering, new paint job, electrical check Delivery time: in stock

Condition: good (used), central separator , price: 1.650 €, contact: Herr Rainer Eckerle Dceded Ewc Ijpfx Albel

Condition: good (used), central separator , price: 1.450 €, contact: Herr Rainer Eckerle Djdpfx Aod Ewc Nolbjcl

Condition: used, KUKA Robot Robot ZH 16 II central hand ZH16II Dcjdsvgwugepfx Albol 00179289

Condition: refurbished (used), PRICE ON REQUEST! > used & tested completely overhauled, all wear parts replaced - completely measured - gear play Dcedpfog A Itqjx Albsl Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - central hand newly adjusted - endurance test for 8 hours at 100% load - delivery in a special box (insured shipping) - central hand in exchange (without exchange on request) - gearbox overhaul of axes 1-6 - 12 months warranty - 18 months possible for an additional charge MORE than 100 central hands in stock immediately, various models. Just ask! An express overhaul of your KUKA central hand is also possible – 48-72 hours from delivery. In addition, we also offer the repair of ABB wrist units.

Year of construction: 2021, condition: new, PRICE ON REQUEST! - NEW - unused - completely measured - Gear backlash: Axis 4 - 0.005 WM Axis 5 - 0.005 WM Axis 6 - 0.005 WM - Central hand newly adjusted - Endurance test for 8 hours at 100% load Dodpfeg A Ivdjx Albecl - Delivery in a special box (insured shipping) - Central hand as an exchange unit (without exchange on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional charge MORE than 100 central hands in stock immediately, various models. Just ask! Express overhaul of your KUKA central hand is also possible - from delivery, 48-72 hours. In addition, we also offer the repair of ABB wrist units.

Condition: refurbished (used), PRICE ON REQUEST! - 5 units, used and inspected completely overhauled, all wear parts replaced Dcodpjg A Iv Esfx Albol - completely measured - Gear play: Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.02 WM - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand available for exchange (without exchange available on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional fee MORE THAN 100 central hands immediately available in stock, various models. Just inquire! We also offer an express overhaul of your KUKA central hand – 48-72 hours from delivery. In addition, we also offer the repair of ABB wrists.

Condition: refurbished (used), KUKA wrist ZH 210/240 Foundry - used & tested completely overhauled, all wear parts updated - completely confused - Operation game Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - KUKA wrist new adjustment - Long test 8 hours at 100% load - Delivery in a special box (protected shipping) - Central trade in exchange (without exchange on request) - Transmission recovery of axles 1-6 - 12 months value added 18 months possible on an extra charge possible On stock more than 100 central hands on stock, various models. Ask a question! Dcedpfxjgz Tcis Albsl Also a express overhaul of your KUKA Central Handheld - From delivery 48 - 72 hours. In addition, we also repair the ABB handgelenke.

Condition: good (used), Somos Central conveying controler 27x year price: €2,750.00 contact: Mr. Rainer Eckerle Dedsxv Am Aepfx Albecl

Condition: used, ABB Foundry Prime Dodpfxsvgwqze Albjcl Central hand robot arm 3HAC032140-001 3HAC027514-010/02 3HAC021485-001/02 600XP 320 Mobilgear

Condition: good (used), Year of construction: 2008, Koch central controler SPS 16 year 2008 Dcjdpfx Aew Hyuuolbol price: €2,750.00 contact: Mr. Rainer Eckerle

Condition: used, mileage: 273,599 km, power: 294 kW (399.73 HP), first registration: 07/2016, fuel type: diesel, empty load weight: 18,450 kg, maximum load weight: 7,550 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 06/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, compressed air brake, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, soot filter, spoiler, traction control, trailer coupling, * German vehicle * From first owner * Only 273,599 km * Only 4,903 operating hours * Condition, see photos * Loading crane from premium manufacturer Palfinger, type PK 34002-SH E + jib PJ 060 B, foldable at the rear * Complete documentation with inspection reports available * Radio remote control * Rotary servo * 5th & 6th control circuit * Floor control * Crane rotates 360° continuously * Hook height 30 meters * Four hydraulic outriggers + 3 jib * Lifting capacity at: 4.4 m = 6,700 kg - 6.3 m = 4,450 kg - 8.2 m = 3,250 kg - 10.3 m = 2,450 kg - 12.4 m = 1,960 kg - 14.5 m = 1,640 kg - 16.7 m = 1,320 kg - 18.9 m = 920 kg - 20 m = 760 kg - 22 m = 680 kg - 24 m = 620 kg - 25.8 m = 570 kg * Maximum load capacity 10,000 kg * 4 hydraulic outriggers * Pallet forks * Trailer coupling * Trailer load 26,470 kg * Total weight: 44,000 kg * Flatbed body with aluminum loading flaps * High front bulkhead * Securing with stake pockets * Flatbed dimensions: L=6,900 x W=2,480 x H=1,000 mm * Steerable trailing lift axle + raise/lower * Automatic transmission * Air conditioning * Cruise control * Auxiliary heater * Reversing camera * Engine brake * Differential lock * Telephone preparation * Comfort driver's seat, air-suspended * Seat heating * Electric windows * Electrically heated mirrors * Radio-CD * Central locking * Sunroof * Easy Start assistance system * Rotating beacon * Suspension: leaf spring / air * Multifunction steering wheel * Work lights * LED daytime running lights * ABS/ASR/ESP * Lane departure warning system * Emergency brake assist * Storage compartment * Wheelbase: 4.80 m + 1.40 m * GVWR 26,000 kg Dcsdpfx Aljyn Rl Eobjl * Unladen weight 18,450 kg * Payload: 7,550 kg * Various stone clamps available at an extra cost If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend that you inspect and test the goods to avoid any misunderstandings regarding their condition and suitability for the buyer. Inspection and testing are possible at any time by appointment and are highly recommended. All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicles. Subject to change, prior sale, and errors.

Condition: used, mileage: 385,000 km, power: 294 kW (399.73 HP), first registration: 10/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * Mercedes Arocs 2040 4x4 AK Meiller DSK * Euro6C * Automatic transmission * Short-distance cab * Leaf spring suspension front and rear * Schmidt front mounting plate Djdoyvni Eepfx Albecl * Trailer coupling * Hydraulic line for trailer * Air conditioning * Heated seats * Beacon lights * Electric windows * Technical permissible gross weight 22,000 kg

Condition: used, Year of construction: 2019, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at ). Tuchel SK-F 180 snow plow / 1850mm / year of manufacture: 2019 / from Kramer 5040 / in stock & immediately available Price: €2,190.00 net / €2,606.10 gross - Clearing width (straight/angled) 175/154 cm - Overall width (max. extension) 185 cm - Weight (without mounting plate) 185 kg - Height 70 cm - Angling up to 30° Equipment: - Hydraulic side adjustment - Swivel casters with stepless height adjustment - Boundary lights (LED) - Edge deflectors left and right The attachment is in new condition. In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are the official DMS sales and service partner. We are the official Holp sales and service partner. We are the official OilQuick sales and service partner. Dodpfx Aleznrpwobscl We are the official Westtech sales and service partner. We are the official Weber MT sales and service partner. We are the official Magni telehandler sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. !!Errors and prior sale excepted!! Internal ID: 600004 = Further information = Intended use: Agriculture Unladen weight: 185 kg Working width: 17.500 cm Please contact Marius Herden for further information.

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Dcsdpfezb Idrsx Albel Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: excellent (used), Year of construction: 2011, volume flow: 2.62 m³/h, operating pressure: 10 bar, pressure: 10 bar, RENNER RSKF 18.5 SCREW COMPRESSOR Variable speed (inverter-controlled) 18.5 kW motor Dcedpfx Aoy Ur Agolbsl Capacity: 2.62 m3/min Pressure: 10 BAR Year of manufacture: 2011 Operating hours: 11,230 hours MACHINE IS IN FULLY WORKING CONDITION.

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System - Machine is fully dismantled and retrofitted Standard Accessories: - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange Dcsdpfx Alsxf Ez Ujbol - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Included: Transport and packaging On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench - Grinding wheel balancing stand - Set of levelling elements - Oil filling

Condition: new, overall weight: 2,600 kg, 2-horse trailer with front exit and tack room from Cheval Liberte model TOURING-COUNTRY-PREMIUM. High entry door, elegant design, aerodynamic, various poly colors, aluminum walls and aluminum floor. Horse transporter for two horses with outstanding driving comfort! The aluminum horse trailer is equipped with a Pullman 2 chassis, which was developed by ChevalLiberte itself. An entry that is only 35cm high, independent wheel suspension, longitudinal control arm, coil spring and shock absorber offer these excellent driving characteristics. A flat ramp that can also be opened like a door makes the horse transport trailer a universal trailer, for example to be able to easily load pallets or to clean the interior better. It is less stressful and less likely for the horses to be injured, as slipping off the flap is thus impossible. The two-horse trailer also has extensive equipment to offer, such as a front exit, tack room, polyester hood in various colors, aluminum walls, aluminum floor, high entrance door, flap door system, Pullman 2 chassis, 100 km/h, interior light, automatic support wheel, four sliding windows, stable frame, V-drawbar and so on. Djdpfxjv A Txas Albecl You can find all the equipment below. Inexpensive accessories such as tie-down brackets, feed buckets, weather hoods, drawbar protection hoods, double-wing doors, trailer locks, 2600 kg GVW, aluminum rims and scratching mats are also available. The structure is splash-proof.

Condition: good (used), Year of construction: 2007, Motan Centralconveying control Metronet Light für 8x Abscheider year: 2007 price: 3.750 € contact: Mr. Rainer Eckerle Dcsdpfxerun Sde Albsl

Condition: new, axle configuration: 2 axles, suspension: air, tire size: 245/70-17,5, Equipment: ABS, - EBS (Electronic Braking System) - LED lighting - Alloy wheels - Air suspension - Spare wheel - Toolbox - Central lubrication - Additional steering axle PAVIC 2-axle forestry machine low loader, type: STLT2Z for harvester transport ---- Upcoming! Color freely selectable!!!! Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Dcedpjyr Izxofx Albel Unladen weight: 9,300 kg Made in Germany!!!! Chassis made of welded steel construction using high-grade fine-grain steels Lashing eyes: 130 kN per side, 5 units each Additional lashing eyes: 3 pairs on the raised bed Insertable stake pocket system made of galvanized steel with aluminum sideboards (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety lock SKF central lubrication system with reservoir (controlled by brake light), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length including rear section: 11,364 mm Saddle height: 1,330 mm Ground clearance at driving level: 184 mm Kingpin projection: 600 mm R1 dimension (kingpin to front): 410 mm (swing radius) R2 dimension (kingpin to frame): 2,150 mm (swing radius) Further dimensions available on request (technical drawings) Axles: 2 x 12,000 kg (technical), Gigant with drum brake, in combination with 8 pcs. 245/70 R17.5 premium tires on Alcoa Dura Bright rims Suspension: Pneumatic with lifting and lowering function Second ride height + approx. 50 mm can be activated from the driver’s cab. When speed exceeds 20 km/h, the trailer lowers automatically. Including axle load gauge Coupling device: 2'' kingpin (interchangeable, single position) WITHOUT landing gear! -> Customers typically use a wide wooden beam under the front frame. Brake system: Wabco EBS with axle load measuring system (Smartboard) incl. odometer Parking brake: spring-actuated Lighting system: 2 pairs of tail lights (3-chamber lights) Side marker lights LED Outline marker lights LED Front and rear position lights LED Reversing and auxiliary lights, each in a round design License plate light LED 1 round beacon, plug-in and cab-operated via separate switch 4 x LED work lights 4 x oversize markers, double-secured (wing screw and pin) with LED lighting red/white Steering: Tridec HF-E (hydraulic forced steering on both axles) including automatic centering and straight-ahead function. Remote control Tridec (wireless remote), also operable by cable Paintwork: Entire steel structure shot-blasted after welding and primed with special adhesion primer. Subsequent 2-component paint finish in RAL color of choice. Axles and wheel hubs painted black or, for an extra charge, finished in RAL color Other mounted parts are galvanized and/or painted/powder-coated or made of aluminum (with or without anodization) Approval: Including §13 report Including §70 report (customer must provide a suitable and approved 3-axle tractor unit); includes, among other things, turning circle test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors, and changes. Axle configuration Tire size: 245/70-17.5...

Condition: new, Technical Data: Fixed angle table: Clamping surface of the fixed angle table: 800 x 400 mm Max. table load: 200 kg Working spindle: Tool holder, horizontal and vertical: ISO 40 Power of the main drive motor / 100% duty cycle: 2.2 kW Vertical milling head: Speed range, stepped: (12) 50 - 2000 rpm Drill quill, stroke: 100 mm Swivel range: +/- 90° Travel distances: X-axis, automatic/manual: 385/400 mm Y-axis, automatic/manual: 185/200 mm Z-axis, automatic/manual: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: continuously adjustable Rapid traverse: 1000 mm/min Features: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle runout max. 0.005 mm, incl. test report according to DIN 8615 (roller bearings SKF®/NSK®) - Vertical milling head can be swiveled for horizontal milling (without disassembly) - All critical parts of the machine, e.g. machine frame, table, milling head, housing, etc., are made of stress-relieved MEEHANITE® quality cast iron (FC 30) and are extensively ribbed to provide the machine with maximum stability and working accuracy. All guide rails are coated with TURCITE®-B Djdpod R S Ndefx Albscl - All machined surfaces in the working area, such as guide rails, table surfaces, T-slots, etc., are hardened and precision-ground. - The powerful drive transmits the power of the main motor to the gearbox via belts. - All axes have their own DC servo motors. These enable sensitive, stepless adjustment of the feed speed. Standard equipment: - DC servo motors for all axes X/Y/Z, incl. electromagnetic brake - Fixed box table - Original Ganter Norm® safety handwheels - Chip collection tray - Backlash-free HIWIN® precision ball screws in all axes X/Y/Z - Gearbox for main spindle - Safety device according to CE or better: - Spindle guard with several micro-switches, adjustable in several steps (enclosure available as an option) - Two emergency stop pushbuttons (1 x machine frame, 1 x control panel) - Mechanical Ganter Norm® safety handwheels in all axes - Electromagnetic spindle brake (for immediate spindle stop) - Electrical overload protection for all axes - Electrical equipment SIEMENS®, BALLUFF® - Braking system prevents the table from dropping - Three reducing sleeves SK 40 to MK 1, 2, 3 - Collet chuck with holder according to DIN 2080 incl. collet set (Ø 6, 8, 10, 12, 16, 20, 25 mm) - Draw-in thread spindle - Horizontal milling arbor (Ø27 mm) - Automatic central lubrication - Lamellar stainless steel cover for the Z-axis guide rail in the working area - Machine light - Coolant system integrated in the machine base - Test report according to DIN 8615 - Operating tool - Machine according to CE - Operating manual, parts list, incl. electrical wiring diagrams, etc.

Condition: new, Universal tool milling machine according to DIN 8615. The torsion-resistant machine stand made of MEEHANITE® quality casting and the high-precision, hardened and ground guides in all axes guarantee high precision and durability. With the 3-axis digital display, all values can be called up directly and with the user-friendly control panel on the jib arm (OPTION), it can be positioned individually. Clamping area of the fixed angle table: 900 x 500 mm Max. Workpiece weight: 360 kg Horizontal and vertical tool holder: ISO 40 Main spindle motor power / 100% ED: 3.75 kW Power feed motors X/Y/Z-axis: 1.0 / 1.0 / 1.5 kW Total connected load: 7.4 kVA Speed range: 40 - 3800 1/min Speed steps: 18 Manual drill sleeve stroke: 120 mm Swivel range: +/- 90 Travel X (automatic/manual): 600 mm Travel Y (automatic/manual): 460 mm Z travel (automatic/manual): 380 mm Dcodpfx Aouxt N Islbsl Feed range, infinitely variable X/Y/Z: 10 - 650 mm/min Rapid traverse: 1000 mm/min Dimensions LxWxH, approx.: 1850 x 1650 x 1900 mm Weight, approx.: 1780 kg Equipment: - 3-axis digital display (e.g. FAGOR® Innova), with various comfort functions, on user-friendly swivel arm (OPTION) - DC servo motors for all X/Y/Z axes, e.g. from DELTA® - Spindle concentricity max. 0.005 mm, incl. test report to DIN 8615 (SKF®/NSK® roller bearings) - Spring-loaded safety handwheels in all axes, e.g. from GANTHER® - Torsion-free machine bed made of MEEHANITE® quality casting - High-precision, hardened and ground guideways in all axes with TURCITE®-B coating - Backlash-free HIWIN® precision ball screws in all axes - Electrical overload protection in all axes - Multi-adjustable spindle protection device secured via micro limit switch - Automatic interval central lubrication - Drilling quill - Swivel-mounted control panel on extension arm (approx. 1,600 mm) (OPTION) - Hydraulic tool clamping - SIEMENS®, BALLUFF® electrical equipment - Coolant device - Horizontal device - LED machine light - Spacious chip collection tray - Test report according to DIN 8615 - Operating tool - Operating instructions, spare parts list, incl. electrical circuit diagrams etc. in German - CE