Used Scm K 100 Edge Bander With Pre-Milling Unit for sale (82,256)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Ndedpsygtzyefx Af Ssb

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover Nodpjthuzpofx Af Sedb - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,2 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi Function Unit (Profile contour Trimming unit) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Ndedjd Scydspfx Af Seb Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 08.190 (1 x Kwv 4,5) CNC (90° / 180° / 270°) CNC

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: AH/117989, Usable working area: X-axis = 3,086 mm Y-axis = 2,155 mm Z-axis = 100 mm Work table: Gridded table with a phenol resin base, grid spacing 30 x 30 mm Multi-zone vacuum system WORKING UNITS: Drilling unit Vertical spindle in X: 5 Vertical spindle in Y: 2 Nodpozy Euqofx Af Sedb Additional unit (ATEMAG) Motor power: 2.2 kW Milling spindle: 6.6 kW electric spindle HSK-F63 tool holder Tool changer: Linear tool magazine 13 tool positions Becker pump: 2 x 250 m³/h Control: PC-based BUSellato/SCM control system Handheld control unit WAVE CAD/CAM software (depending on configuration) Machine dimensions: L = 5120 x W = 3420 x H = 2120 mm Weight: 3400 kg

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 K Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Spindle speed 6,000 rpm Ndsdpjwc A R Dofx Af Ssb 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides Ndsdpfx Afob A Im Re Ssb -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Nsdsflc Uhopfx Af Sodb Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Nedsd Rcigjpfx Af Sjdb Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified Ndodpfxezinpce Af Sob TECHNICAL SPECIFICATIONS: - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds - Table dimensions: 22 x 144 cm - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other - Attachment, protractor for angle sanding - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Nedpfx Afed Nt N Hs Sedb Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control Power Control 22 Feeding speed m/min 18 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) QA 34 + PU 34 Band Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Pneu (2 pos.) Rough Trimming unit Optimat (2 x Kw 0,55) Multi Function Unit (Profile contour Trimming unit) FK 13 (2 x Kw 0,4) CNC (revolver 8+8 pos.) Nodod Nt Nqepfx Af Sjdb Profile edge scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit ( Glue scraper + Buffing unit) FA 11 (Pneu) OPTIONAL: Panels Return System "LIGMATECH" Mod. ZHR 05/L/075 (SOFIT code Z02007)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 3,000 h, SCM Accord 40 fx – CNC Machining Center for Timber Construction (Complete description available in the attachment) Used Machine, Year of Manufacture: 10/2022 Consisting of: - R21431 Accord 40 fx – Working field X-Y = 9000 x 1905 mm, Z = 350 mm, quantity: 1 - OF0158 Usable pass-through height Z = 350 mm (with H50 vacuum cups), quantity: 1 - OF0165 Traversing speed on all axes, Accord 40 fx (PRO-SPEED version), quantity: 1 - OF0168 Pendulum operation, quantity: 1 - OF0169 Automatic axis lubrication, quantity: 1 - OF0299 TELESOLVE remote maintenance via Internet, quantity: 1 - 450328 eye-M PRO operation console with integrated PC, quantity: 1 - 450291 Additional fixed operator panel, quantity: 1 - 870068 TECPAD – remote control for machine functions, quantity: 1 - 560058 No. 10 MATIC support rails, L1825, quantity: 1 - 230237 MAXI working unit – Prisma T, quantity: 1 - 870031 Chip hood on the electric spindle, adjustable, quantity: 1 Ndsdpfsyzgxcox Af Seb - 870109 Preparation for angle gear "Prisma T-S", quantity: 1 - 470014 Air nozzle for tools, quantity: 1 - 870119 Tool length measuring device, quantity: 1 - 870016 BRC working unit, quantity: 1 - 510014 Jaw preparation H145 for worktable with 10 support rails, quantity: 1 - 480178 Front stop row H110 for worktable with 10 support rails, quantity: 1 - 480105 Rear stop row H110 for worktable with 10 support rails, quantity: 1 - 480137 First lateral stop row H110 for worktable with 10 support rails, quantity: 1 - 480005 Vacuum cup H110 145x145 mm, quantity: 12 - 480006 Rotatable vacuum cup H110 145x55 mm, quantity: 8 - 480018 Rotatable vacuum cup H110 145x30 mm, quantity: 5 - 480049 Rotatable vacuum cup H110 200x40 mm, quantity: 5 - 480149 First lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480153 Second lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480107 Round pneumatic clamping cylinders H145, quantity: 8 - 480108 Square pneumatic clamping cylinders H145, quantity: 30 - 480111 No. 6 lifting devices with double stroke H145, quantity: 1 - 450289 Laser and reference stop H145 for arcs (left), quantity: 1 - 350016 Vacuum pump 250 (300) m³/h – 50 (60) Hz, quantity: 1 - 190046 PRO-SPEED safety system, quantity: 1 - 210057 TRC 48 – rear-side tool magazine, quantity: 1 - 210190 MACH 5 – quick-change system, quantity: 1 - 870236 RTCP setting – self-calibration system for Prisma working unit, quantity: 1 - Air conditioning for the control cabinet, quantity: 1 - 450288 Safety enclosure with vertical ON-OFF adjustment, quantity: 1 - 210852 SCM angle head HSK 63E – underfloor milling unit, quantity: 1 - OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE, quantity: 1 - OF0543 Operating system Windows 10 embedded 64 bit, quantity: 1 - OF0422 Machine control interface software Maestro cnc, quantity: 1 - OF0435 Hardware dongle for Maestro cnc, quantity: 1 - 524309 Maestro 3D-Advanced module, quantity: 1 - 630359 Additional hardware dongle for Maestro cnc (for USB port), quantity: 1 - 523687 ProView simulation software, quantity: 1 - 109993 MACHINE LANGUAGE: German, quantity: 1 - SPEC01 Special design – Special Accord 9 meter processing in X - SPEC02 Special design – 2 pieces push-in double-stroke aids H145 - SPEC03 Special design – Spare spindle Maxi-Prisma-T

Condition: used, Year of construction: 2012, functionality: unexamined, GERIMA SMA 50P portable beveling/edge preparation machines for sale. Ndsdpezyah Sofx Af Ssb Quantity: - 2 units Main specifications: - Manufacturer: GERIMA - Model: SMA 50P - Year: 2012 - Portable beveling/chamfering machines - Suitable for metal edge preparation and beveling applications - Supplied in transport cases - Inserts/accessories included, as shown in the photos Used equipment, sold as-is. Condition and completeness are shown in the photos. The listed price is for both units. Individual sale can also be arranged. Location: Estonia. Loading/collection: Forklift/pallet handling capability available on-site. Transportation is at the buyer’s expense.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 1000004052, functionality: fully functional, Equipment: type plate available, For sale edgebanding machine Biesse Stream B1 8.5 with return table Edgebanding machine in continuous use - edgebanding in PUR and AIR FORCE technology feed rate 1-25 mb/min wrapping methods - AIR FORCE - PUR - EVA maximum height of the elements being glued - 40 mm maximum width of the elements on the return table - 1300 mm line composition - 2 milling heads height 44mm - EVA / PUR overlay unit - AIR FORCE - drills - pre-profile cutters - rounders - groove saw Ndodpfx Afou Suh Sj Sob - profile cyclers - flat cyclines - polishers magazine for 12 rolls of edge banding in case of questions please contact us.

Condition: used, Spindle moulder SCM T130 NPS - used - fine-adjustable fence, tenoning and slotting table, right-/left-hand rotation ----- Technical Data ----- Table size: 1,080 x 750 mm, Spindle diameter: 30 mm, Ndedow Nv Nfspfx Af Ssb Speeds: 3,000/4,500/6,000/7,000/10,000 rpm, Extraction port Ø: 120 mm, Lower extraction port Ø: 120 mm

Condition: used, Year of construction: 2010, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, Weight: 1.500 kg - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 161/1-10 - Number of units [pcs]: 7 Ndedpfxeyu Tkkj Af Sob - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5500mm x 1500mm x 2580mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1997, Very well-maintained 4-sided planer, with low usage. Maximum working width: 230 mm Maximum working height: 120 mm Spindle motor power: U: 5.5 kW Ndjdezlk U Hepfx Af Sjb L and R: 7.5 kW O: 5.5 kW Equipped with Tersa planing heads.

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Ndodpfx Afjgy Dbpe Seb -Manufacturer: Katt, milling unit with 3 milling cutters -Motor: Type N132M 12 kW / 2960 rpm -Protection class: IP 44 -Shaft: both sides Ø 40 x 235 mm -Milling width: 20/10/18 mm -Dimensions: 840/320 / H380 mm -Weight: 99 kg

Year of construction: 2004, condition: good (used), Laservall KUBO100 Tempering Unit (2004) The Laservall KUBO100 is a compact, fiber-delivered pulsed Nd:YAG welding system often utilized for precision laser welding and micro-welding applications. It is frequently featured as part of the Master Kubo Series from Laservall S.P.A. (Italy), Ndsdpfx Afeu Aqr Ij Seb designed for high-precision manufacturing, often in industrial settings. 1. System Type: Pulsed Nd:YAG laser welding system (sometimes referred to as a welding microscope or workstation). 2. Applications: Ideal for precision welding, micro-welding, and repairing, often used on mold tools. 3. Key Features: Offers high-precision welding capability, often integrated with a microscope for detailed work. 4. Manufacturer: Laservall (Italy). 5. Model Variants: Units often feature 2004 or 2009 manufacturing dates in second-hand markets. It is important to differentiate the KUBO 100 welding system from similar names, as some listings in industrial marketplaces may confuse it with a "tempering unit" or cooling accessory, but the primary identification is as a specialized welding

Condition: used, Year of construction: 2011, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Colour: Grey Weight: 2.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5/1-107 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit Ndsdpfjyf Daksx Af Sjb - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 8th unit type: - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 21.9 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1440mm x 1730mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for: joint milling -with: heavy dovetail guide -Milling unit: swiveling -3x: Perske Motors -Engine 1: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Engine 2: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Motor 3: Type KNS 51.14-2 D -Power: 1/2 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2750/5700 rpm -Other engines with different performance levels are available from us for an additional charge. Ndjdpfxjdx Aiws Af Ssb -Number: 1x joining milling unit available -Price: per piece -Dimensions: 1370/1100/H1330 mm -Weight: 608 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: scm, total height: 3,200 mm, total length: 5,300 mm, total width: 3,000 mm, overall weight: 4,500 kg, table length: 3,100 mm, table width: 1,250 mm, year of last overhaul: 2024, Equipment: CE marking, SCM Record 110 AL Prisma 5-Axis CNC Machining Center | Year of manufacture 2007 | Immediately ready for operation | Complete with tool package For sale is an SCM Record 110 AL Prisma, a powerful 5-axis CNC machining center from the year 2007. The machine was in continuous operation until disassembly and can, of course, be inspected and tested while powered on. It operates reliably and precisely and is ideally suited for furniture, interior design, stair and door manufacturing. A detailed video demonstrating its functionality is available on YouTube and shows the machine in operation for approximately 30 minutes. Included in the scope of delivery: ✔ SCM Record 110 AL Prisma 5-Axis CNC Machining Center, equipped with tools. ✔ Complete set of machine tools ✔ Tool magazine ✔ Vacuum pump ✔ All vacuum cups ✔ Special vacuum cups for door processing (see video & images) ✔ Machine control PC ✔ All existing machining programs remain on the computer The machine is therefore sold complete and ready for operation. The PC from the office with PaletteCAD license can also be purchased. The video demonstrates, among other things: Manufacturing of a complete cabinet side Machining of a center panel Milling of an outer contour Milling of a rectangular pocket True 5-axis machining Creating an exact 90° internal corner using a 60° chamfering cutter The video impressively demonstrates the precision and technical condition of the machine. Technical data Manufacturer: SCM Model: Record 110 AL Prisma Year of manufacture: 2007 5-axis machining Vacuum table Tool changer Control PC included CE version Condition The machine is in good condition and was in daily use until disassembly. Inspections and a test run are expressly welcome after prior arrangement. Disassembly / Loading Approximately one week of lead time should be planned for the disassembly of the machine. Ndjdjz Dq Tqopfx Af Seb We will, of course, assist with the organization of shipping/transport, which can be arranged and commissioned if required. The costs will be borne by the buyer. We can also disassemble the machine and load it for you. Sold on behalf of a customer by Bima Maschinen. The machine is located in Luxembourg, near the German border. An invoice as an intra-community supply is possible if the location is outside of Luxembourg, within the EU.

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. Nsdpfxjzxqhye Af Ssdb The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) Nsdozc Agkepfx Af Sedb - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) Nodpfor A Eq Rex Af Sjdb L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame